YNYoshiki Naoi

Yoshiki Naoi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yoshiki Naoi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Broadband chromatic-aberration-corrected metalens integrating a 1D grating structure for spectral dispersion and focusing

    by Takaaki Morimoto, Yuusuke Takashima, Kenzo Yamaguchi, Yoshiki Naoi, Masanobu Haraguchi, Toshihiro Okamoto

    Metalenses integrating spectral dispersion and focusing are promising for compact spectrometers, but broadband continuous spectral dispersion perpendicular to the optical axis is hindered by chromatic aberration. We introduced a one-dimensional grating structure into a metalens and corrected chromatic aberration by spatial multiplexing over 1.31–1.65 µm. This design achieved dispersion and focusing while maintaining chromatic-aberration correction. Optical characterization showed wavelength-dependent focal spots along an axis perpendicular to the optical axis, with 1.31- and 1.65-µm light separated by 5.3° after transmission.

  • Atomically smooth surfaces with linearly aligned atomic steps in AlGaN layers grown using sputtered AlN template with reduced compressive strain on low misorientation off-angle sapphire substrates

    by Yuto Matsubara, Koki Fujii, Yusuke Takayanagi, Yukiya Hayashi, Soki Shimizu, Yuki Kuwahara, Kota Matsuo, Soichiro Iseki, Yuusuke Takashima, Yoshiki Naoi, et al.

    Atomically smooth surfaces with linearly aligned atomic steps in AlGaN layers were demonstrated by the sputtered AlN template with reduced compressive strain using sapphire substrates with 0.2° misorientation off angle. The hillock structures owing to spiral growth were absent on the surfaces of Al 0.72 Ga 0.28 N and Al 0.80 Ga 0.20 N. In both samples, atomic force microscopy (AFM) images revealed atomically smooth surfaces with a root mean square roughness of approximately 0.2 nm, and aligned atomic steps. Furthermore, hillock formation owing to spiral growth was confirmed in Al 0.54 Ga 0.46 N. The X-ray diffraction (XRD) ω scan for the 0002 reflection showed that AlGaN maintained high orientation property to the c -axis direction of AlN. The best full width at half maximum achieved in this study were 13 and 15 arcsec for Al 0.80 Ga 0.20 N and AlN, respectively. These results indicate XRD and AFM measurements were correlated. Furthermore, correlations were observed using transmission electron microscopy.

  • Open Access

    Highly sensitive refractive index sensor based on asymmetric spectral response of TiO2 high-contrast grating under LED illumination

    by Yua Okano, Yuusuke Takashima, Masanobu Haraguchi, Yoshiki Naoi

    A highly sensitive intensity-interrogation refractive index (RI) sensor with a light-emitting diode (LED) was experimentally implemented via spectrally asymmetric resonance of a high-contrast grating (HCG). Our novel design concept realizes high sensitivity to RI variations by leveraging the asymmetry of the HCG’s resonant spectrum to control its overlap with the light-source spectrum; in contrast, most conventional designs only focus on shifting the resonant spectrum. Electromagnetic field numerical simulations clarified that an optimized HCG exhibited spectrally asymmetric resonant reflection. The measured reflection spectra showed good agreement with the calculation results, and the reflected light intensity from the sample varied dramatically with a minuscule RI variation under 490 nm LED illumination owing to a significant change in the overlap. An RI sensitivity of 481% per refractive index unit (RIU) and an RI limit of detection of 9.98 × 10 −4 RIU were experimentally achieved. Our sensor can be used in a wide range of applications owing to its high RI sensitivity and simple LED-based system without complex equipment, such as a spectrometer or angle-resolved setup.

  • High-temperature AlN growth by metalorganic vapor phase epitaxy on sputtered AlN with various thicknesses

    by Yuto Matsubara, Koki Fujii, Yusuke Takayanagi, Yukiya Hayashi, Soki Shimizu, Yuki Kuwahara, Yuusuke Takashima, Yoshiki Naoi, Atsushi Maeoka, Atsushi Osawa, et al.

    High-quality AlN is directly grown on sputtered AlN (Sp-AlN) without pretreatment, using jet stream gas flow metalorganic vapor phase epitaxy (MOVPE). For the 12 nm-thick Sp-AlN sample, a full width at half maximum (FWHM) of 16 arcseconds was observed in the 0002 X-ray diffraction (XRD) ω scan, along with atomic steps with high linearity were observed despite the short AlN growth time of 15 min. Although the FWHMs of MOVPE-AlN 0002 ω scans improved as the thickness of Sp-AlN decreased, MOVPE-AlN 101 ̅2 FWHMs were not so different across the Sp-AlN thicknesses. Correlations were also confirmed between cross-sectional transmission electron microscopy (TEM) observations and the XRD ω scan. The c-axis lattice constants of MOVPE-AlN remained nearly constant, close to that of unstrained AlN. These results suggest that no additional compressive strain is introduced into MOVPE-AlN, even when using compressively strained Sp-AlN and high-temperature growth.


  • Open Access

    Polarization-tunable plasmonic coloration across ultrawide gamut using lossy-metal/dielectric/width-modulated lossy-metal subwavelength grating structure

    by Yuusuke Takashima, Kentaro Nagamatsu, Masanobu Haraguchi, Yoshiki Naoi

    Switchable structural coloration has attracted significant interest in many applications because this approach can dynamically generate static and multiple colors based on external stimuli. However, the dynamic controllable gamut is limited to a narrow visible region. This study experimentally demonstrated polarization-tunable plasmonic color across an ultrawide gamut using lossy-metal/dielectric/width-modulated lossy-metal subwavelength grating (SWG). The numerically simulated electromagnetic field distribution shows that p-polarized (the electric field perpendicular to the grating) and s-polarized (the field parallel to the grating) irradiations excited spectrally broadened optical resonances owing to the optical damping of the lossy metals and these resonances induced a large phase difference between both types of irradiations over a wide wavelength region. Our hypothesis that a suitable combination of different structural SWG widths can be used to design the phase difference was validated via these simulations. Moreover, the calculated field distribution showed that the designed phase difference varied the polarization states of the reflected light across the entire visible region, depending on the wavelength. The SWG structure was fabricated using electron-beam lithography, and the measured reflection spectra exhibited excellent agreement with the simulation results. The fabricated sample formed an ultrawide oval in the CIE1931 color space by rotating the polarizer and realized an extremely wide polarization-tunable gamut compared to the existing gamut. The proposed strategy, which benefits from lossy materials, contributes to development of novel design concepts and material selection for various color-control applications.

  • Highly Sensitive Refractive Index Sensor Using Dual Resonance in Subwavelength Grating/Waveguide With Normally Incident Optical Geometry

    by Yuusuke Takashima, Keita Kusaba, Masanobu Haraguchi, Yoshiki Naoi

    A highly sensitive refractive index sensor with normally incident optical geometry was experimentally demonstrated using dual resonance in a subwavelength grating (SWG) on a waveguide. Two eigenmodes within the SWG and waveguide were utilized for refractive index sensing with the reduction of noise such as background noise. The finite-difference time-domain numerical method was used to estimate the refractive index sensing performance of our sensor. The calculated electric field clarified that the incident light could excite modes in the SWG and waveguide with normally incident optical geometry, and the modes formed two resonance reflection peaks. The calculation showed that these dual resonance peaks depended differently on the refractive index of the ambient around the sensor, and the intensity difference between both resonance peaks varied with the slight change in refractive index of the ambient. The sensor was fabricated using traditional electron-beam lithography techniques, and two reflection resonant peaks were experimentally obtained. The difference between the dual resonance peak intensities varied significantly with the minuscule change in refractive index of the ambient around the sensor, and the resolution of the refractive index reached $7.65\times 10^{\mathbf {-4}}$ , assuming a spectrometer intensity sensitivity of 1%.


  • Surface Smoothing Mechanism of AlN Film by Initially Alternating Supply of Ammonia

    by Fawang Yan, Masashi Tsukihara, Akihiro Nakamura, Takayuki Yadani, Tetsuya Fukumoto, Yoshiki Naoi, Shiro Sakai

    A buffer technique that initially alternates supply of ammonia (IASA) is employed for AlN film growth on sapphire substrate by metalorganic chemical vapor deposition (MOCVD). Atomic force microscopy (AFM) study reveals that step-flow-like growth morphology is achieved for the AlN film with the root-mean-square (rms) roughness as small as 0.336 nm. In contrast, the surface morphology of thick AlN film grown directly on sapphire substrate shows rough grainy feature with a large rms value of 28.9 nm. The mechanism leading to superior morphology by introducing IASA process is investigated using transmission electron microscopy (TEM), hot wet chemical etching and scanning electron microscopy (SEM) techniques. Evidence is presented that their morphological differences are attributed to strain reduction and polarity inversion. The present work provides insight into the AlN epitaxial growth and indicates that IASA is an effective method to realize atomically smooth AlN film.


  • Growth and Characterization of Thick GaN by Sublimation Method and Homoepitaxial Growth by Metalorganic Chemical Vapor Deposition

    by Satoshi Kurai, Toshimitsu Abe, Yoshiki Naoi, Shiro Sakai

    Thick GaN, 10-30 µm, was grown on sapphire substrate by a sublimation method for the first time. GaN was homoepitaxially grown on this thick layer by metalorganic chemical vapor deposition to obtain a high-quality layer. Stimulated emission from a photopumped homoepitaxial GaN grown on thick GaN prepared by the sublimation method at room temperature was demonstrated. The threshold of the stimulated emission was estimated to be 1.04 MW/cm2.