Volodymyr Sokolov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Volodymyr Sokolov has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- Pavlo Skladannyi
Borys Grinchenko Kyiv metropolitan University
25 shared publications - Volodymyr Buriachok
Borys Grinchenko Kyiv University
11 shared publications - Volodymyr Astapenya
Borys Grinchenko Kyiv University,Dept. of Inform. and Cyber Security,Kyiv,Ukraine
10 shared publications Volodymyr Buriachok
Borys Grinchenko Kyiv University, Kyiv, Ukraine
8 shared publicationsPavlo Skladannyi
7 shared publications- Ievgen Iosifov
Ender Turing OÜ
5 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (10) , 883
Asymmetric Interference Perception Method in Short-Range Wireless Systems
In the 2.4 GHz band, the channel of a short-range link is usually selected at one end; in Bluetooth Low Energy, a peripheral’s channel classification is advisory. This paper examines, for one instrumented case, whether the two ends of a link perceive interference similarly. A purpose-built protocol on two nRF52840 devices reported each end’s noise floor once per adaptation window. On a 4.2 m indoor link with one swept narrowband interferer, 656 time-paired windows were obtained. In the 614 quiet windows, the transmitter read a standing dB more than the receiver, whereas a co-location control gave a mean offset of 0.66 dB. In the 42 windows within fifteen interference episodes, the difference had a standard deviation of 19.2 dB, and the two ends classified the channel differently in 38. Co-located devices also differed by a median of 9 dB under a directed source, so these differences cannot be attributed wholly to position. With two simultaneously sampled receive chains 60 cm apart, the levels received from a moving source were uncorrelated. A negotiation in which the receiver selects among the transmitter’s candidate channels completed 17 of 17 changes on a quiet bench and 43 of 44 under interference; in all 43, however, it selected the channel that transmitter-only selection would have used. Endpoint perception therefore differed substantially in this configuration, whereas an advantage of the method over simpler alternatives was not demonstrated.- 14 October 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (10) , 883
Open AccessAsymmetric Interference Perception Method in Short-Range Wireless Systems
In the 2.4 GHz band, the channel of a short-range link is usually selected at one end; in Bluetooth Low Energy, a peripheral’s channel classification is advisory. This paper examines, for one instrumented case, whether the two ends of a link perceive interference similarly. A purpose-built protocol on two nRF52840 devices reported each end’s noise floor once per adaptation window. On a 4.2 m indoor link with one swept narrowband interferer, 656 time-paired windows were obtained. In the 614 quiet windows, the transmitter read a standing dB more than the receiver, whereas a co-location control gave a mean offset of 0.66 dB. In the 42 windows within fifteen interference episodes, the difference had a standard deviation of 19.2 dB, and the two ends classified the channel differently in 38. Co-located devices also differed by a median of 9 dB under a directed source, so these differences cannot be attributed wholly to position. With two simultaneously sampled receive chains 60 cm apart, the levels received from a moving source were uncorrelated. A negotiation in which the receiver selects among the transmitter’s candidate channels completed 17 of 17 changes on a quiet bench and 43 of 44 under interference; in all 43, however, it selected the channel that transmitter-only selection would have used. Endpoint perception therefore differed substantially in this configuration, whereas an advantage of the method over simpler alternatives was not demonstrated. - Open Access
- 1 October 2026
- Published by MDPI AG in Information
- Vol. 17 (10) , 958
A Semantically Oriented Method for Knowledge Representation in Artificial Intelligence Systems for Cybersecurity
This paper proposes a semantically oriented knowledge-representation method for transforming primary cyber-event data into structured semantic knowledge to support explainable reasoning in cybersecurity decision-making. The core contribution is a transformation mechanism from primary semantic information (PSI) to secondary semantic information (SSI), based on a frame model of network events and attack patterns and followed by rule-based logical inference. This inference process maps semantic predicates to MITRE Adversarial Tactics, Techniques, and Common Knowledge (MITRE ATT&CK) techniques and reconstructs causal attack chains. The method is implemented within an Information-Semantic System (ISS) and integrated with explainable artificial intelligence (XAI), thereby ensuring that each decision can be traced to the rules and semantic relationships that produced it. Evaluation on the CICIDS2017 dataset, using a binary classification task (Normal vs. Attack), a stratified 60/20/20 train–validation–test split, and five experimental runs, yielded a precision of 0.94, a recall of 0.91, and an F1-score of 0.92. These results are comparable to those achieved by strong neural-network-based baselines, while the proposed method provides substantially greater interpretability and decision traceability. In two anonymised operational SOC/SIEM environments, the method reduced incident triage time by 22–38% and the false-positive rate by 18–34% compared with a baseline machine learning-only pipeline. The paper further examines transferability across additional datasets, presents ablation analyses, incorporates short-term-memory (STM)-based temporal context, and discusses explainability mechanisms and alignment with relevant cybersecurity standards.
- 1 October 2026
- Published by MDPI AG in Information
- Vol. 17 (10) , 958
Open AccessA Semantically Oriented Method for Knowledge Representation in Artificial Intelligence Systems for Cybersecurity
This paper proposes a semantically oriented knowledge-representation method for transforming primary cyber-event data into structured semantic knowledge to support explainable reasoning in cybersecurity decision-making. The core contribution is a transformation mechanism from primary semantic information (PSI) to secondary semantic information (SSI), based on a frame model of network events and attack patterns and followed by rule-based logical inference. This inference process maps semantic predicates to MITRE Adversarial Tactics, Techniques, and Common Knowledge (MITRE ATT&CK) techniques and reconstructs causal attack chains. The method is implemented within an Information-Semantic System (ISS) and integrated with explainable artificial intelligence (XAI), thereby ensuring that each decision can be traced to the rules and semantic relationships that produced it. Evaluation on the CICIDS2017 dataset, using a binary classification task (Normal vs. Attack), a stratified 60/20/20 train–validation–test split, and five experimental runs, yielded a precision of 0.94, a recall of 0.91, and an F1-score of 0.92. These results are comparable to those achieved by strong neural-network-based baselines, while the proposed method provides substantially greater interpretability and decision traceability. In two anonymised operational SOC/SIEM environments, the method reduced incident triage time by 22–38% and the false-positive rate by 18–34% compared with a baseline machine learning-only pipeline. The paper further examines transferability across additional datasets, presents ablation analyses, incorporates short-term-memory (STM)-based temporal context, and discusses explainability mechanisms and alignment with relevant cybersecurity standards.
- Open Access
- 24 September 2026
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 2 (34) , 665-676
ADAPTATION OF ZERO TRUST ARCHITECTURE FOR CYBER-PHYSICAL ROBOTIC SYSTEMS: BASIC REQUIREMENTS AND WIRELESS CHANNEL RESILIENCE LIMITS
The problem of applying the Zero Trust approach to the security of Cyber-Physical Robotic Systems is analyzed. It is substantiated that the close interaction of network computing, sensors, actuators and physical control systems forms a single risk plane, where the compromise of identification data, telemetry or communication channels threatens both information leakage and dangerous physical incidents. The research area covers industrial and mobile robots, unmanned aerial vehicles, service and collaborative robots, the functioning of which depends on cyber components capable of influencing physical behavior. Within the framework of the architecture development, five basic Zero Trust requirements were formulated: verifiable identification, contextual authorization, network segmentation, assessment of telemetry relevance and reliability, as well as adaptive response with limited operation and local fault tolerance. To determine the limits of the stability of the wireless control channel, simulation modeling was performed in the ns-3 environment (IEEE 802.11ax WiFi 6 standard, one access point, 20 client stations). Based on the analysis of 140 routes (distances 30–125 m, total load 100 Mbps), the aggregate useful throughput (aggregate goodput), p95 delay, and packet loss percentage were estimated. A two-stage nature of the communication channel degradation was revealed: the early time degradation limit was recorded at a distance of 40 m (p95 delay jump to 351.8 ms with almost no loss), and the limit of stable loss degradation was recorded at 50 m (losses of 9.61%). At a critical distance of 125 m, goodput decreases to 0.387 Mbps with losses of 99.81%. It was established that the obtained wireless communication stability limits are decisive for telemetry delivery and response mode selection, but in isolation do not guarantee the implementation of Zero Trust. For comprehensive validation of the zero-trust architecture, a pipeline for synchronized analysis of network metrics, security events, and the physical state of the robot is proposed.
- 24 September 2026
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 2 (34) , 665-676
Open AccessADAPTATION OF ZERO TRUST ARCHITECTURE FOR CYBER-PHYSICAL ROBOTIC SYSTEMS: BASIC REQUIREMENTS AND WIRELESS CHANNEL RESILIENCE LIMITS
The problem of applying the Zero Trust approach to the security of Cyber-Physical Robotic Systems is analyzed. It is substantiated that the close interaction of network computing, sensors, actuators and physical control systems forms a single risk plane, where the compromise of identification data, telemetry or communication channels threatens both information leakage and dangerous physical incidents. The research area covers industrial and mobile robots, unmanned aerial vehicles, service and collaborative robots, the functioning of which depends on cyber components capable of influencing physical behavior. Within the framework of the architecture development, five basic Zero Trust requirements were formulated: verifiable identification, contextual authorization, network segmentation, assessment of telemetry relevance and reliability, as well as adaptive response with limited operation and local fault tolerance. To determine the limits of the stability of the wireless control channel, simulation modeling was performed in the ns-3 environment (IEEE 802.11ax WiFi 6 standard, one access point, 20 client stations). Based on the analysis of 140 routes (distances 30–125 m, total load 100 Mbps), the aggregate useful throughput (aggregate goodput), p95 delay, and packet loss percentage were estimated. A two-stage nature of the communication channel degradation was revealed: the early time degradation limit was recorded at a distance of 40 m (p95 delay jump to 351.8 ms with almost no loss), and the limit of stable loss degradation was recorded at 50 m (losses of 9.61%). At a critical distance of 125 m, goodput decreases to 0.387 Mbps with losses of 99.81%. It was established that the obtained wireless communication stability limits are decisive for telemetry delivery and response mode selection, but in isolation do not guarantee the implementation of Zero Trust. For comprehensive validation of the zero-trust architecture, a pipeline for synchronized analysis of network metrics, security events, and the physical state of the robot is proposed.
- Open Access
- 21 August 2026
- Published by State University "Kyiv Aviation Institute" in Ukrainian Scientific Journal of Information Security
- Vol. 32 (2) , 6-22
Метод оптимізації стратегій кіберзахисту в розподілених інформаційних системах на основі багатокритеріальної оптимізації NSGA-II та теорії ігор
У статті розроблено метод оптимізації стратегій кіберзахисту в розподілених інформаційних системах на основі багатокритеріальної оптимізації NSGA-II та теорії ігор. Актуальність дослідження зумовлена зростанням кількості кіберзагроз, ускладненням архітектури розподілених інформаційних систем, збільшенням обсягів оброблюваних даних та необхідністю підвищення ефективності прийняття рішень щодо формування стратегій кіберзахисту в умовах обмежених ресурсів і динамічної зміни параметрів кіберсередовища. У роботі проведено аналіз сучасних підходів до забезпечення кібербезпеки розподілених інформаційних систем, методів оцінювання ризиків, багатокритеріальної оптимізації та застосування теорії ігор у задачах стратегічного планування кіберзахисту. Встановлено, що існуючі підходи недостатньо враховують одночасний вплив рівня ризику, вартості впровадження механізмів захисту, ефективності засобів кіберзахисту та можливої поведінки порушника під час формування оптимальних стратегій. Запропоновано математичну модель оптимізації стратегій кіберзахисту, яка поєднує багатокритеріальне оцінювання альтернатив із використанням алгоритму NSGA-II та ігрову модель стратегічної взаємодії між системою кіберзахисту і порушником. Розроблено систему критеріїв оптимізації, що враховує рівень ризику, витрати на реалізацію захисних заходів, рівень захищеності інформаційних ресурсів і час реагування на кіберінциденти. Запропоновано архітектуру системи підтримки прийняття рішень, алгоритм функціонування методу та процедуру формування множини Парето-оптимальних стратегій. Проведено обчислювальний експеримент для різних сценаріїв функціонування розподіленої інформаційної системи. Результати моделювання показали зниження інтегрального рівня ризику, підвищення ефективності стратегій кіберзахисту, покращення адаптивності системи до зміни умов функціонування та переваги над традиційними підходами. Отримані результати підтвердили доцільність використання поєднання багатокритеріальної оптимізації NSGA-II та теорії ігор для підтримки прийняття рішень у сфері кібербезпеки.
- 21 August 2026
- Published by State University "Kyiv Aviation Institute" in Ukrainian Scientific Journal of Information Security
- Vol. 32 (2) , 6-22
Open AccessМетод оптимізації стратегій кіберзахисту в розподілених інформаційних системах на основі багатокритеріальної оптимізації NSGA-II та теорії ігор
У статті розроблено метод оптимізації стратегій кіберзахисту в розподілених інформаційних системах на основі багатокритеріальної оптимізації NSGA-II та теорії ігор. Актуальність дослідження зумовлена зростанням кількості кіберзагроз, ускладненням архітектури розподілених інформаційних систем, збільшенням обсягів оброблюваних даних та необхідністю підвищення ефективності прийняття рішень щодо формування стратегій кіберзахисту в умовах обмежених ресурсів і динамічної зміни параметрів кіберсередовища. У роботі проведено аналіз сучасних підходів до забезпечення кібербезпеки розподілених інформаційних систем, методів оцінювання ризиків, багатокритеріальної оптимізації та застосування теорії ігор у задачах стратегічного планування кіберзахисту. Встановлено, що існуючі підходи недостатньо враховують одночасний вплив рівня ризику, вартості впровадження механізмів захисту, ефективності засобів кіберзахисту та можливої поведінки порушника під час формування оптимальних стратегій. Запропоновано математичну модель оптимізації стратегій кіберзахисту, яка поєднує багатокритеріальне оцінювання альтернатив із використанням алгоритму NSGA-II та ігрову модель стратегічної взаємодії між системою кіберзахисту і порушником. Розроблено систему критеріїв оптимізації, що враховує рівень ризику, витрати на реалізацію захисних заходів, рівень захищеності інформаційних ресурсів і час реагування на кіберінциденти. Запропоновано архітектуру системи підтримки прийняття рішень, алгоритм функціонування методу та процедуру формування множини Парето-оптимальних стратегій. Проведено обчислювальний експеримент для різних сценаріїв функціонування розподіленої інформаційної системи. Результати моделювання показали зниження інтегрального рівня ризику, підвищення ефективності стратегій кіберзахисту, покращення адаптивності системи до зміни умов функціонування та переваги над традиційними підходами. Отримані результати підтвердили доцільність використання поєднання багатокритеріальної оптимізації NSGA-II та теорії ігор для підтримки прийняття рішень у сфері кібербезпеки.
- Open Access
- 25 June 2026
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 1 (33) , 716-727
ADAPTIVE MODEL OF CYBERTHREAT DETECTION IN IOT SUBSYSTEMS DATE CENTERS
The integration of Internet of Things (IoT) technologies, edge/fog computing, and cloud services into modern data centers creates prerequisites for improving monitoring efficiency, infrastructure management automation, continuous telemetry data collection, and adaptive control of cooling systems, power consumption, and network resources within data centers. Alongside these advantages, the number of cyber threats is also increasing due to the expansion of the attack surface, the use of heterogeneous IoT devices, and the complexity of securing distributed infrastructures. This paper investigates the features of implementing IoT components in cloud environments and data centers while considering modern information security threats. Particular attention is paid to DDoS attacks, spoofing attacks, and the compromise of infrastructure nodes. An adaptive cyber threat detection model is proposed, combining statistical network traffic analysis, behavioral analysis of nodes, and graph-based representation of interactions between system components. To assess the state of the infrastructure, an integrated risk indicator is used, taking into account traffic intensity, source entropy, behavioral profile deviation, and interaction graph parameters. The paper also proposes the architecture of an adaptive cyber threat detection system for an IoT-oriented data center, including the IoT layer, the edge/fog preprocessing layer, the analytical cloud layer, the graph correlation module, and the automated cyber incident response layer.
- 25 June 2026
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 1 (33) , 716-727
Open AccessADAPTIVE MODEL OF CYBERTHREAT DETECTION IN IOT SUBSYSTEMS DATE CENTERS
The integration of Internet of Things (IoT) technologies, edge/fog computing, and cloud services into modern data centers creates prerequisites for improving monitoring efficiency, infrastructure management automation, continuous telemetry data collection, and adaptive control of cooling systems, power consumption, and network resources within data centers. Alongside these advantages, the number of cyber threats is also increasing due to the expansion of the attack surface, the use of heterogeneous IoT devices, and the complexity of securing distributed infrastructures. This paper investigates the features of implementing IoT components in cloud environments and data centers while considering modern information security threats. Particular attention is paid to DDoS attacks, spoofing attacks, and the compromise of infrastructure nodes. An adaptive cyber threat detection model is proposed, combining statistical network traffic analysis, behavioral analysis of nodes, and graph-based representation of interactions between system components. To assess the state of the infrastructure, an integrated risk indicator is used, taking into account traffic intensity, source entropy, behavioral profile deviation, and interaction graph parameters. The paper also proposes the architecture of an adaptive cyber threat detection system for an IoT-oriented data center, including the IoT layer, the edge/fog preprocessing layer, the analytical cloud layer, the graph correlation module, and the automated cyber incident response layer.
- Open Access
- 17 June 2026
- Published by MDPI AG in Preprints.org
Semantically Oriented Method оf Knowledge Presentation in Artificial Intelligence Systems for Cyber Security
The article proposes a semantically oriented method for representing and processing knowledge in artificial intelligence systems for cybersecurity tasks. The method is based on a frame model that provides a structured rep-resentation of network events, threats, and attack patterns, and supports context-dependent decision-making by forming explainable conclusions. A logical inference mechanism based on rules and semantic generalisation opera-tions has been implemented, supplemented by a short-term memory (STM) module that accounts for the temporal characteristics of events within a sliding observation window. This allows explicit matching of semantic predicates (SSI) with MITRE ATT&CK techniques and accounts for the temporal characteristics of events with the formation of reproducible cause-and-effect attack chains. To improve interpretability, the results of logical inference are inte-grated with explainable artificial intelligence (XAI) methods, in particular SHAP and LIME, which ensure trans-parency of decisions at the event and attack-scenario levels. The scientific novelty lies in combining semantic knowledge structuring with the temporal context of STM and explainable rule-based reasoning in a single incident analysis pipeline. Experimental validation was performed on the CICIDS-2017 benchmark datasets with additional portability testing on KDD Cup 99 and NSL-KDD, confirming competitive accuracy and high explainability. The practical applicability of the method was demonstrated in anonymised production SOC environments with real telemetry flows (XDR/EDR, network sensors, IAM logs), resulting in reduced triage time and fewer false positives. The proposed approach complies with the requirements of international standards ISO/IEC 27001 and NIST SP 800-53, supports integration with the MITRE ATT&CK knowledge base and the Zero Trust architecture, and pro-motes the development of intelligent agents for reliable, explainable decision-making in cybersecurity.
- 17 June 2026
- Published by MDPI AG in Preprints.org
Open AccessSemantically Oriented Method оf Knowledge Presentation in Artificial Intelligence Systems for Cyber Security
The article proposes a semantically oriented method for representing and processing knowledge in artificial intelligence systems for cybersecurity tasks. The method is based on a frame model that provides a structured rep-resentation of network events, threats, and attack patterns, and supports context-dependent decision-making by forming explainable conclusions. A logical inference mechanism based on rules and semantic generalisation opera-tions has been implemented, supplemented by a short-term memory (STM) module that accounts for the temporal characteristics of events within a sliding observation window. This allows explicit matching of semantic predicates (SSI) with MITRE ATT&CK techniques and accounts for the temporal characteristics of events with the formation of reproducible cause-and-effect attack chains. To improve interpretability, the results of logical inference are inte-grated with explainable artificial intelligence (XAI) methods, in particular SHAP and LIME, which ensure trans-parency of decisions at the event and attack-scenario levels. The scientific novelty lies in combining semantic knowledge structuring with the temporal context of STM and explainable rule-based reasoning in a single incident analysis pipeline. Experimental validation was performed on the CICIDS-2017 benchmark datasets with additional portability testing on KDD Cup 99 and NSL-KDD, confirming competitive accuracy and high explainability. The practical applicability of the method was demonstrated in anonymised production SOC environments with real telemetry flows (XDR/EDR, network sensors, IAM logs), resulting in reduced triage time and fewer false positives. The proposed approach complies with the requirements of international standards ISO/IEC 27001 and NIST SP 800-53, supports integration with the MITRE ATT&CK knowledge base and the Zero Trust architecture, and pro-motes the development of intelligent agents for reliable, explainable decision-making in cybersecurity.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Determining the Bandwidth of a Multilayer VPN
Protecting information and transferring data over a Virtual Private Network (VPN) are important issues nowadays, as the risks of cybercrime and data theft are increasing in all developed countries. A VPN is a lightweight program that connects your devices to remote servers scattered around the world, hiding your real IP address. This way, when you go online and access a particular website, your internet company cannot see what web services you are using, and the website host cannot determine your true location. VPNs also use several data encryption technologies to encrypt information exchanged over a wireless or wired network, making it unreadable to outsiders. Protecting yourself with a VPN is one of the few possible and 100% legal ways to protect your data and disappear from mass surveillance agents. This paper discusses ways to ensure the security of data transmission over the Internet using multi-layer tunneling.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Determining the Bandwidth of a Multilayer VPN
Protecting information and transferring data over a Virtual Private Network (VPN) are important issues nowadays, as the risks of cybercrime and data theft are increasing in all developed countries. A VPN is a lightweight program that connects your devices to remote servers scattered around the world, hiding your real IP address. This way, when you go online and access a particular website, your internet company cannot see what web services you are using, and the website host cannot determine your true location. VPNs also use several data encryption technologies to encrypt information exchanged over a wireless or wired network, making it unreadable to outsiders. Protecting yourself with a VPN is one of the few possible and 100% legal ways to protect your data and disappear from mass surveillance agents. This paper discusses ways to ensure the security of data transmission over the Internet using multi-layer tunneling.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Telecommunication Network Availability After Hydroelectric Power Plant Reservoir Dam Incident
To ensure the availability of the telecommunication network in the event of an incident at the dam of a hydroelectric power plant reservoir, the hydrological hazards provoked by incidents and the results of their action have been investigated. The method of ensuring the availability of the telecommunication network for protecting the telecommunication network from natural hazards of global warming has been modified to the method of ensuring the readiness of the hybrid telecommunication network in the event of incidents at a hydroelectric power station dam. It has been used the modified method, to systematize measures to ensure the availability of the telecommunications network, which can be used for floods in flood zones. A formal description of the relationship between the coefficients of connectivity and telecommunication network readiness has been developed.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Telecommunication Network Availability After Hydroelectric Power Plant Reservoir Dam Incident
To ensure the availability of the telecommunication network in the event of an incident at the dam of a hydroelectric power plant reservoir, the hydrological hazards provoked by incidents and the results of their action have been investigated. The method of ensuring the availability of the telecommunication network for protecting the telecommunication network from natural hazards of global warming has been modified to the method of ensuring the readiness of the hybrid telecommunication network in the event of incidents at a hydroelectric power station dam. It has been used the modified method, to systematize measures to ensure the availability of the telecommunications network, which can be used for floods in flood zones. A formal description of the relationship between the coefficients of connectivity and telecommunication network readiness has been developed.
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Method for adaptive cryptographic protection management in computer networks based on dy-namic risk assessment and post-quantum algorithms
The article addresses the problem of ensuring adaptive cryptographic protection in computer networks under conditions of increasing cyber threats, a growing number of attacks on infor-mation resources, and the need to transition to post-quantum cryptographic algorithms. It is es-tablished that traditional approaches to the selection of cryptographic mechanisms are predomi-nantly static and insufficiently consider risk dynamics, the state of network infrastructure, traf-fic characteristics, and resource constraints, which may result in inefficient resource utilization or a reduced level of information protection. A method for cryptographic protection manage-ment based on dynamic risk assessment is proposed. It provides adaptive selection of crypto-graphic algorithms depending on the current state of the system, threat level, and data security requirements. Within the proposed method, an integrated risk assessment model is developed that takes into account threat intensity, vulnerability level, asset criticality, and the probability of attack realization. An adaptive performance indicator for cryptographic algorithms is intro-duced, considering both the risk component and computational resource consumption. A mech-anism for the dynamic selection of cryptographic solutions is implemented, enabling the use of classical, hybrid, and post-quantum algorithms depending on the risk level and the current state of the information environment. A distinctive feature of the proposed approach is the introduc-tion of a cryptographic protection intensity function, which enables the formalization of the se-curity level as a time-varying parameter and adapt protection settings to changing network op-erating conditions. The results demonstrate that the proposed method improves the efficiency of cryptographic protection, optimizes resource utilization, and enhances the resilience of infor-mation systems against current and emerging cyber threats.
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Method for adaptive cryptographic protection management in computer networks based on dy-namic risk assessment and post-quantum algorithms
The article addresses the problem of ensuring adaptive cryptographic protection in computer networks under conditions of increasing cyber threats, a growing number of attacks on infor-mation resources, and the need to transition to post-quantum cryptographic algorithms. It is es-tablished that traditional approaches to the selection of cryptographic mechanisms are predomi-nantly static and insufficiently consider risk dynamics, the state of network infrastructure, traf-fic characteristics, and resource constraints, which may result in inefficient resource utilization or a reduced level of information protection. A method for cryptographic protection manage-ment based on dynamic risk assessment is proposed. It provides adaptive selection of crypto-graphic algorithms depending on the current state of the system, threat level, and data security requirements. Within the proposed method, an integrated risk assessment model is developed that takes into account threat intensity, vulnerability level, asset criticality, and the probability of attack realization. An adaptive performance indicator for cryptographic algorithms is intro-duced, considering both the risk component and computational resource consumption. A mech-anism for the dynamic selection of cryptographic solutions is implemented, enabling the use of classical, hybrid, and post-quantum algorithms depending on the risk level and the current state of the information environment. A distinctive feature of the proposed approach is the introduc-tion of a cryptographic protection intensity function, which enables the formalization of the se-curity level as a time-varying parameter and adapt protection settings to changing network op-erating conditions. The results demonstrate that the proposed method improves the efficiency of cryptographic protection, optimizes resource utilization, and enhances the resilience of infor-mation systems against current and emerging cyber threats.
- 20 November 2025
- Published by Scientific Center of Innovative Research
Developing a Balanced Security Policy for Bring Your Own Device in Corporate Networks
With the rapid expansion of personal device usage in corporate environments, the Bring Your Own Device (BYOD) concept introduces significant cybersecurity challenges. This study focuses on formalizing and systematizing approaches to securing BYOD-enabled infrastructures within organizations. A comprehensive architecture is proposed based on seven interconnected models: a risk assessment model, Multi-Factor Authentication (MFA) model, a Zero Trust (ZT) access control model, an encryption security model, a network segmentation model, a security monitoring and response model, and a User Behavior Analytics (UBA) model. Each model is presented in a formal mathematical form, enabling quantitative evaluation of security metrics and adaptive protection aligned with real-time threat conditions. The architecture reflects a defense-in-depth principle, where safeguards at others mitigate weaknesses at one layer. The interaction between components forms a closed-loop system of analysis, control, and response in which user and device risk profiles influence access policies, authentication mechanisms, and monitoring intensity. Special emphasis is placed on dynamic trust evaluation and adaptive response based on behavioral anomalies. The models can be applied to design, assess, and optimize enterprise security frameworks in BYOD scenarios. The integration of these models allows for a highly modular and scalable approach to enterprise security, where a combination of statistical inference, user context, and technical indicators drives decision-making. This multi-factor model enhances resilience by enabling proactive detection and isolation of threats, ensuring that access decisions are granular and risk-aware. Formal metrics also support auditing, compliance, and continual improvement processes across diverse regulatory environments. Finally, directions for future research are outlined, including empirical validation of the models, integration of machine learning techniques, enhancement of behavioral analytics, and incorporation of economic cost models. The proposed approach provides a foundation for building secure, flexible, and scalable BYOD security systems in the era of digital mobility.
- 20 November 2025
- Published by Scientific Center of Innovative Research
Developing a Balanced Security Policy for Bring Your Own Device in Corporate Networks
With the rapid expansion of personal device usage in corporate environments, the Bring Your Own Device (BYOD) concept introduces significant cybersecurity challenges. This study focuses on formalizing and systematizing approaches to securing BYOD-enabled infrastructures within organizations. A comprehensive architecture is proposed based on seven interconnected models: a risk assessment model, Multi-Factor Authentication (MFA) model, a Zero Trust (ZT) access control model, an encryption security model, a network segmentation model, a security monitoring and response model, and a User Behavior Analytics (UBA) model. Each model is presented in a formal mathematical form, enabling quantitative evaluation of security metrics and adaptive protection aligned with real-time threat conditions. The architecture reflects a defense-in-depth principle, where safeguards at others mitigate weaknesses at one layer. The interaction between components forms a closed-loop system of analysis, control, and response in which user and device risk profiles influence access policies, authentication mechanisms, and monitoring intensity. Special emphasis is placed on dynamic trust evaluation and adaptive response based on behavioral anomalies. The models can be applied to design, assess, and optimize enterprise security frameworks in BYOD scenarios. The integration of these models allows for a highly modular and scalable approach to enterprise security, where a combination of statistical inference, user context, and technical indicators drives decision-making. This multi-factor model enhances resilience by enabling proactive detection and isolation of threats, ensuring that access decisions are granular and risk-aware. Formal metrics also support auditing, compliance, and continual improvement processes across diverse regulatory environments. Finally, directions for future research are outlined, including empirical validation of the models, integration of machine learning techniques, enhancement of behavioral analytics, and incorporation of economic cost models. The proposed approach provides a foundation for building secure, flexible, and scalable BYOD security systems in the era of digital mobility.