XWXiyang Wang

Xiyang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiyang Wang has a total of 353 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unlocking High‐Performance Te‐Free p‐Type Thermoelectrics via Cu Doping in Entropy‐Engineered Cd 0.5 Zn 0.5 Sb Zintl

    by Chen Li, Jie Huang, Yujie Zhang, Hao Yang, Haorui Hua, Dan Feng, Zhen‐Hua Ge, Ming Huang, Xiyang Wang, Dan Zhang, et al.

    Zintl phases are crucial for Te‐free power generation and electrical cooling modules, which are considered next‐generation thermoelectric (TE) technology. While n‐type Zintl materials, such as Mg 3 Sb 2 , have achieved remarkable performance, their p‐type counterparts are restricted by electron‐phonon coupling. This work demonstrates a cost‐effective p‐type CdSb‐based Zintl material with high TE performance. We find that applying entropy engineering can sharply enhance the solid solubility of Cu in CdSb. Cu doping in entropy‐engineered Cd 0.5 Zn 0.5 Sb raises carrier concentration. More importantly, Cu boosts carrier mobility to about 222 cm 2 V −1 s −1 by screening ionized impurity scattering and enhancing covalent bonding across the cleavage plane along the [1 0 0] direction. Additionally, Cu doping induces dislocation scattering and lattice softening, significantly reducing lattice thermal conductivity. As a result, the Cd 0.46 Cu 0.04 Zn 0.5 Sb material achieves a high ZT of 1.5 at 573 K. Its high performance is verified by integrated TE devices. This work validates Cd 1− x Zn x Sb Zintl phases as highly efficient p‐type TE materials for practical applications.

  • Unlocking High‐Performance Te‐Free p‐Type Thermoelectrics via Cu Doping in Entropy‐Engineered Cd 0.5 Zn 0.5 Sb Zintl

    by Chen Li, Jie Huang, Yujie Zhang, Hao Yang, Haorui Hua, Dan Feng, Zhen‐Hua Ge, Ming Huang, Xiyang Wang, Dan Zhang, et al.

    Zintl phases are crucial for Te‐free power generation and electrical cooling modules, which are considered next‐generation thermoelectric (TE) technology. While n‐type Zintl materials, such as Mg 3 Sb 2 , have achieved remarkable performance, their p‐type counterparts are restricted by electron‐phonon coupling. This work demonstrates a cost‐effective p‐type CdSb‐based Zintl material with high TE performance. We find that applying entropy engineering can sharply enhance the solid solubility of Cu in CdSb. Cu doping in entropy‐engineered Cd 0.5 Zn 0.5 Sb raises carrier concentration. More importantly, Cu boosts carrier mobility to about 222 cm 2 V −1 s −1 by screening ionized impurity scattering and enhancing covalent bonding across the cleavage plane along the [1 0 0] direction. Additionally, Cu doping induces dislocation scattering and lattice softening, significantly reducing lattice thermal conductivity. As a result, the Cd 0.46 Cu 0.04 Zn 0.5 Sb material achieves a high ZT of 1.5 at 573 K. Its high performance is verified by integrated TE devices. This work validates Cd 1− x Zn x Sb Zintl phases as highly efficient p‐type TE materials for practical applications.

  • Open Access

    Epitaxial Oxide Interfaces Create Poison‐Resistant CuO Sites for Environmental Catalysis

    by Lupeng Han, Yanqing Li, Yongjie Shen, Huijun Yu, Evangelina Pensa, Xuehui Yang, Yanqi Chen, Xiaonan Hu, Xiyang Wang, Song Li, et al.

    Real exhaust streams rarely contain a single pollutant: NO x coexists with volatile organic compounds (VOCs) in flue gas from petrochemical production, chemical manufacturing, and waste incineration, yet catalysts that couple NH 3 ‐SCR with VOC oxidation typically suffer competitive adsorption, sulfur poisoning, and HCN byproduct formation. Here we engineer an epitaxially stabilized CuO overlayer on Ti 1‐x In x O 2 that breaks the activity–selectivity–stability constraint by creating electron‐poor, high‐symmetry Cu–O sites and activating lattice‐oxygen redox at the oxide–oxide interface. Interfacial strain and charge transfer increase Cu–O covalency and Lewis acidity, accelerating NO x reduction via an Eley–Rideal pathway while diverting sulfate deposition away from Cu. Concurrently, interface‐activated lattice oxygen sustains deep oxidation of CH 3 SH (a representative S‐VOC) through a Mars–van Krevelen cycle, suppressing HCN. Epitaxial interfaces thus offer a general route to poison‐resistant multipollutant catalysis.

  • Open Access

    Epitaxial Oxide Interfaces Create Poison‐Resistant CuO Sites for Environmental Catalysis

    by Lupeng Han, Yanqing Li, Yongjie Shen, Huijun Yu, Evangelina Pensa, Xuehui Yang, Yanqi Chen, Xiaonan Hu, Xiyang Wang, Song Li, et al.

    Real exhaust streams rarely contain a single pollutant: NO x coexists with volatile organic compounds (VOCs) in flue gas from petrochemical production, chemical manufacturing, and waste incineration, yet catalysts that couple NH 3 ‐SCR with VOC oxidation typically suffer competitive adsorption, sulfur poisoning, and HCN byproduct formation. Here we engineer an epitaxially stabilized CuO overlayer on Ti 1‐x In x O 2 that breaks the activity–selectivity–stability constraint by creating electron‐poor, high‐symmetry Cu–O sites and activating lattice‐oxygen redox at the oxide–oxide interface. Interfacial strain and charge transfer increase Cu–O covalency and Lewis acidity, accelerating NO x reduction via an Eley–Rideal pathway while diverting sulfate deposition away from Cu. Concurrently, interface‐activated lattice oxygen sustains deep oxidation of CH 3 SH (a representative S‐VOC) through a Mars–van Krevelen cycle, suppressing HCN. Epitaxial interfaces thus offer a general route to poison‐resistant multipollutant catalysis.

  • Polarized Metal Nitride Solid Solutions as Electrocatalysts Enabling Ampere-Level Selective Formic Acid Synthesis

    by Zheng Dai, Haoran Zhao, Qiang Li, Xiyang Wang, Yao Yuan, Huashuai Hu, Xianran Xing, Minghui Yang

    Formic acid (FA) is an important value-added product in biomass electrooxidation and an effective liquid fuel and hydrogen carrier. However, achieving its efficient industrial-scale synthesis with durable hydrogen evolution remains challenging. Here, we report a single-phase NiCoN solid-solution metal nitride catalyst, in which atomic-level Co incorporation induces symmetry-breaking Ni–N–Co coordination environments with electronically polarized active sites. This structural modulation drives the interfacial transformation into metal oxy(hydro)xide species and optimizes the adsorption energies of relevant intermediates. These changes accelerate dehydrogenation kinetics and lower the energy barrier for C–C bond cleavage, thereby directing the reaction pathway toward selective stepwise oxidation to FA. The optimal NiCoN catalyst achieves a FA Faradaic efficiency of 97.2% and sustains over 3,600 h of operation at 1 A cm–2 in an anion-exchange membrane (AEM) electrolyzer, representing one of the longest reported lifetimes for a glycerol-assisted coupled system. This work establishes atomic-scale solid-solution engineering as an effective approach to regulate catalytic pathways and long-term interfacial stability for biomass electrochemical conversion.


  • Enhancing Thermoelectric Performance through Semiconductor–Semimetal Heterostructure via Entropy- and Enthalpy-Driven Phase Regulation in Al/S-Doped BiSbSe 3

    by Tianyi Ma, Fanshi Wu, Yue Lou, Xiaokun Li, Kangpeng Jin, Xiyang Wang, Pengfei Xu, Zhan Shi, Biao Xu

    This study presents a phase-regulation strategy for enhancing the thermoelectric performance of BiSbSe3-based materials through the controlled formation of a semiconductor-semimetal heterostructure. By incorporating sulfur and aluminum dopants, a hexagonal phase is induced within an orthorhombic BiSbSe3 matrix, thereby establishing a bidirectionally adjustable phase composition through compositional regulation. The hexagonal phase exhibits semimetallic behavior, with a Fermi level positioned higher than that of the semiconductor matrix. This electronic structure difference is consistent with low-barrier interfacial charge transfer and a modulation-doping-like redistribution of electrons across the phase boundaries, contributing to enhanced carrier concentration without severely sacrificing carrier mobility. Moreover, the inherently low thermal conductivity of both phases, combined with enhanced phonon scattering at the interfaces and simultaneous control over grain refinement during phase regulation, effectively suppresses the lattice thermal conductivity. The resulting biphasic structure enables coupled regulation of electronic and thermal transport, synergistically improving thermoelectric performance, achieving a peak thermoelectric figure of merit (zT) of 1.50 at 773 K in Bi0.98Sb0.98Al0.04Se2.8S0.2 under the fixed 2 wt % CuI donor-additive condition. This improvement relative to BiSbSe3 materials demonstrates the effectiveness of phase engineering in decoupling electrical and thermal transport properties. These results highlight interface-engineered semiconductor-semimetal heterostructures as an effective design route for high-performance thermoelectric materials.


  • Redox-Paired Oxide/Nitride Electrodes for Humidity-Tolerant Fuel-Cell NO 2 Sensing

    by Xichao Mo, Jiaxin Li, Fengge Liu, Chenshuai Han, Haoran Zhao, Congling Yin, Xiyang Wang, Minghui Yang

    Fuel-cell-type electrochemical gas sensors are attractive for low-power monitoring but often suffer from humidity-sensitive baselines and limited long-term stability in nitrogen dioxide (NO2) detection. Here, we address this challenge by implementing redox pairing between chemically orthogonal electrodes in an asymmetric TiN/SnO2 heteroelectrode, in which metallic TiN serves as a NO2-reduction cathode and oxygen-vacancy-rich SnO2 functions as an oxygen evolution anode, separated by a Nafion membrane. The resulting room-temperature NO2 sensor exhibits a sensitivity of 1.572 μA ppm−1, a theoretical detection limit of 18 ppb, and 8/9 s response/recovery times, while maintaining strong selectivity, minimal humidity-induced drift, and >98% signal retention over 180 days. These figures of merit surpass those of symmetric TiN−TiN and SnO2−SnO2 sensors and previously reported fuel-cell-type NO2 sensors. Mechanistic analysis combining in situ infrared spectroscopy and density functional theory shows that SnO2 drives water oxidation whereas TiN stabilizes NO2-derived intermediates and mediates electron transfer. Machine-learning-guided screening further identifies TiN/SnO2 as an optimal candidate within a broader oxide/nitride design space, highlighting redox-paired electrodes as a promising strategy for humidity-tolerant fuel-cell-type gas sensing.


  • Atomic‐Mesoscale Synergy in Amorphous Iridium Oxide Catalysts for Proton Exchange Membrane Water Electrolysis

    by Hui Chen, Jiale Li, Ke Sun, Kun Qi, Xinyue Ni, Xiyang Wang, Haidong Xu, Muhan Na, Xiao Zhao, Zizhun Wang, et al.

    Amorphous iridium oxide (IrO x ) is among the most active Ir‐based catalysts for the acidic oxygen evolution reaction (OER), yet its stability is severely limited because lattice‐oxygen participation often triggers irreversible oxygen loss that leads to iridium dissolution and structural degradation. Here, we present a surfactant‐directed synthesis of mesoporous IrO x electrocatalysts featuring a hollandite‐type local structure. This unique structure creates an atomic‐mesoscale synergy that enhances OER activity without sacrificing stability and improves high‐current‐density performance. At the atomic level, the hollandite‐type local structure promotes high OER activity and corrosion resistance. In situ spectroscopic and isotopic labeling experiments reveal a reversible cycle of lattice oxygen loss and reformation during OER. This process enables the flexible iridium local structure to transition between an initial six‐coordinate state and a low‐coordinated active state. At the mesoscale, an interconnected porous network ensures efficient mass transport and maximizes active‐site accessibility. As a result, this mesoporous electrocatalyst achieves a low cell voltage (1.75 V @ 2 A cm −2 ) and excellent stability for more than 2000 h (@ 2 A cm −2 ) in proton exchange membrane water electrolysis (PEMWE).


  • Atomic‐Mesoscale Synergy in Amorphous Iridium Oxide Catalysts for Proton Exchange Membrane Water Electrolysis

    by Hui Chen, Jiale Li, Ke Sun, Kun Qi, Xinyue Ni, Xiyang Wang, Haidong Xu, Muhan Na, Xiao Zhao, Zizhun Wang, et al.

    Amorphous iridium oxide (IrO x ) is among the most active Ir‐based catalysts for the acidic oxygen evolution reaction (OER), yet its stability is severely limited because lattice‐oxygen participation often triggers irreversible oxygen loss that leads to iridium dissolution and structural degradation. Here, we present a surfactant‐directed synthesis of mesoporous IrO x electrocatalysts featuring a hollandite‐type local structure. This unique structure creates an atomic‐mesoscale synergy that enhances OER activity without sacrificing stability and improves high‐current‐density performance. At the atomic level, the hollandite‐type local structure promotes high OER activity and corrosion resistance. In situ spectroscopic and isotopic labeling experiments reveal a reversible cycle of lattice oxygen loss and reformation during OER. This process enables the flexible iridium local structure to transition between an initial six‐coordinate state and a low‐coordinated active state. At the mesoscale, an interconnected porous network ensures efficient mass transport and maximizes active‐site accessibility. As a result, this mesoporous electrocatalyst achieves a low cell voltage (1.75 V @ 2 A cm −2 ) and excellent stability for more than 2000 h (@ 2 A cm −2 ) in proton exchange membrane water electrolysis (PEMWE).


  • Single‐Atom and 1 nm Cluster Co‐Modified Thermoelectrics

    by Yezhen Hua, Ji‐Chang Ren, Bassem A. Al‐Maythalony, Wei Zhao, Pengfei Xu, Hao Yang, Tianyu Deng, Molly Meng‐Jung Li, Cailing Chen, Gang Sha, et al.

    The size‐dependent electronic and phononic configurations of single atoms and nanoclusters enable tailored functionalities. Their synergistic effects also attract attention, yet precise control of anti‐aggregation states during high‐temperature operations poses formidable challenges in multiple fields such as fuel cells and thermoelectrics. Herein, we develop a solution‐processed strategy to precisely incorporate Pt species as isolated atoms (Pt 1 ) and sub‐nanoclusters (Pt n , ∼1 nm) in Bi 2 S 3 . Notably, Pt n of 1 nm size exhibit significant advantages over larger‐size counterparts in tuning electronic structure and optimizing charge transfer. Furthermore, Pt 1 and Pt n scatter 1 Å‐ to 1 nm‐ wavelength phonon that is conventionally underexplored. The 1 nm Pt n exhibits distinct force constant as compared to 3 nm Pt n , leading to ultra‐strong phonon Rayleigh scattering, which in turn significantly reduces thermal conductivity. The optimized Bi 2 S 3 ‐Pt 1 /Pt n composite achieves breakthrough thermoelectric performance, attaining a maximum zT of 1.02 at 773 K and single‐leg conversion efficiency of 1.58%, both setting benchmarks for Bi 2 S 3 systems. This strategy can also be extended to other thermoelectric material systems such as Bi 0.4 Sb 1.6 Te 3 , PbTe, or other fields including solid‐state batteries and solar cells.