Sumeet Singh Bhatia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sumeet Singh Bhatia has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Narinder Sharma
Department of Electrical EngineeringAmritsar College of Engineering and Technology Amritsar Punjab India
12 shared publications Jagtar Singh Sivia
Electronics and Communication Engineering Department, Yadavindra College of Engineering and Technology, Guru Kashi Campus Punjabi University Bathinda India
4 shared publications- Jagtar Singh Sivia
Yadavindra Department of Engineering, ECE, Punjabi University, Talwandi Sabo, India
4 shared publications Narinder Sharma
Department of Electrical and Electronics Engineering Amritsar College of Engineering and Technology 143001 Amritsar Punjab India
2 shared publicationsAditi Sahni
Guru Nanak Dev Univ, Reg Campus, Gurdaspur, Punjab, India
1 shared publication- Amandeep Kaur Sarao
Department of Computer Science Engineering, Yadavindra College of Engineering and Technology, Guru Kashi Campus, Punjabi University, Talwandi Sabo, Bathinda, India
1 shared publication
Latest Publications
- Open Access
- 30 June 2026
- Published by Springer Nature in Wireless Personal Communications
- Vol. 146 (7) , 1-3
Correction to: A Mechanical Bearing Shaped, Two-Port MIMO Antenna with Defected Ground and T-Stub for Multi-Standard Wireless Applications
- 30 June 2026
- Published by Springer Nature in Wireless Personal Communications
- Vol. 146 (7) , 1-3
Open AccessCorrection to: A Mechanical Bearing Shaped, Two-Port MIMO Antenna with Defected Ground and T-Stub for Multi-Standard Wireless Applications
- 9 September 2022
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 110 (8) , 1516-1533
Design and investigation of pocket shaped fractal antenna using circular ring elements for UWB technology with stub loaded DGS
Stub loaded Pocket Shaped Fractal Antenna (PSFA) with defected ground structure of volumetric dimensions 32×36×1.6mm3 for UWB technology has been presented in this manuscript. Proposed antenna’s structure exhibits improved impedance bandwidth in juxtaposition to other geometries like antenna with partial ground plane and ground plane with defects. The ground plane of the proposed antenna has been modified for attaining the improved results. Final, structure of antenna with modified ground plane reveals the wider impedance bandwidth of 11.80GHz (149.36%) and 5.33GHz (30.75%) in the frequency range from 2.0 – 13.80GHz and 14.67 – 20.0GHz respectively. The peak realized gain of antenna is also being computed and divulged as 7.02dB at 9.7GHz frequency band. The co and cross-polarization radiation patterns in E and H-plane of proposed antenna are measured and presented at frequency points 3.0, 4.9, 7.3, 8.8, 10.2, 13.0, 16.6 and 19.4GHz. The proposed antenna has been simulated and its performance is also being investigated by using HFSS V13 simulator. Further, optimized antenna geometry is fabricated, and fair comparison between simulated and measured results has been drawn and divulged in reasonable agreement with each other. The proposed antenna has reported the wider bandwidth which made it a suitable candidate for distinct wireless applications in the UWB frequency range.
- 9 September 2022
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 110 (8) , 1516-1533
Design and investigation of pocket shaped fractal antenna using circular ring elements for UWB technology with stub loaded DGS
Stub loaded Pocket Shaped Fractal Antenna (PSFA) with defected ground structure of volumetric dimensions 32×36×1.6mm3 for UWB technology has been presented in this manuscript. Proposed antenna’s structure exhibits improved impedance bandwidth in juxtaposition to other geometries like antenna with partial ground plane and ground plane with defects. The ground plane of the proposed antenna has been modified for attaining the improved results. Final, structure of antenna with modified ground plane reveals the wider impedance bandwidth of 11.80GHz (149.36%) and 5.33GHz (30.75%) in the frequency range from 2.0 – 13.80GHz and 14.67 – 20.0GHz respectively. The peak realized gain of antenna is also being computed and divulged as 7.02dB at 9.7GHz frequency band. The co and cross-polarization radiation patterns in E and H-plane of proposed antenna are measured and presented at frequency points 3.0, 4.9, 7.3, 8.8, 10.2, 13.0, 16.6 and 19.4GHz. The proposed antenna has been simulated and its performance is also being investigated by using HFSS V13 simulator. Further, optimized antenna geometry is fabricated, and fair comparison between simulated and measured results has been drawn and divulged in reasonable agreement with each other. The proposed antenna has reported the wider bandwidth which made it a suitable candidate for distinct wireless applications in the UWB frequency range.
- 22 June 2022
- Published by Springer Nature in Wireless Personal Communications
- Vol. 126 (4) , 3211-3231
Lantern Logo Shaped Novel Monopole Antenna with Semi-Circular Notch Loaded Partial Ground Plane for Ultra-Wideband Wireless Applications
- 22 June 2022
- Published by Springer Nature in Wireless Personal Communications
- Vol. 126 (4) , 3211-3231
Lantern Logo Shaped Novel Monopole Antenna with Semi-Circular Notch Loaded Partial Ground Plane for Ultra-Wideband Wireless Applications
- 25 October 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 36 (7) , 1-19
Design of antenna by amalgamating staircase and hexagonal ring-shaped structures with the modified ground plane for multi-standard wireless applications
In this article, an antenna has been designed by amalgamating staircase structure on hexagonal ring-shaped geometry using the modified ground plane for multi-standard wireless applications. The proposed antenna is compact in size with volumetric dimension of 24 × 30 × 1.6 mm3 and designed on a low-cost FR4 glass epoxy substrate. Initially, the partial ground plane is being used, and antenna reports an impedance bandwidth of 2.64, 0.96, 0.59 and 1.24 GHz at the respective frequency ranges. Furthermore, the ground plane of the proposed antenna is modified by introducing stubs and parasitic elements to improve the performance parameters such as bandwidth and reflection coefficient. The final geometry of antenna reveals the enhanced bandwidth of 3.04 GHz (1.55–4.59 GHz), 930 MHz (5.19–6.12 GHz) and 3.92 GHz (7.0–10.92 GHz). Also, the proposed antenna resonates at four frequency bands of 3.0, 5.7, 8.5 and 10.1 GHz with the corresponding reflection coefficient of −32.17, −38.37, −46.0 and −28.61 dB. Thus, the final optimized structure is also being fabricated for the authentication of simulated results. Both the results are compared and found in agreement with each other. The rest of the parameters such as gain, radiation efficiency and radiation patterns are analyzed and found satisfactory for the wireless operations. Due to the wider bandwidth and proper impedance matching in the desired frequency ranges, the proposed antenna can be considered as a proficient candidate for distinct wireless applications.
- 25 October 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 36 (7) , 1-19
Design of antenna by amalgamating staircase and hexagonal ring-shaped structures with the modified ground plane for multi-standard wireless applications
In this article, an antenna has been designed by amalgamating staircase structure on hexagonal ring-shaped geometry using the modified ground plane for multi-standard wireless applications. The proposed antenna is compact in size with volumetric dimension of 24 × 30 × 1.6 mm3 and designed on a low-cost FR4 glass epoxy substrate. Initially, the partial ground plane is being used, and antenna reports an impedance bandwidth of 2.64, 0.96, 0.59 and 1.24 GHz at the respective frequency ranges. Furthermore, the ground plane of the proposed antenna is modified by introducing stubs and parasitic elements to improve the performance parameters such as bandwidth and reflection coefficient. The final geometry of antenna reveals the enhanced bandwidth of 3.04 GHz (1.55–4.59 GHz), 930 MHz (5.19–6.12 GHz) and 3.92 GHz (7.0–10.92 GHz). Also, the proposed antenna resonates at four frequency bands of 3.0, 5.7, 8.5 and 10.1 GHz with the corresponding reflection coefficient of −32.17, −38.37, −46.0 and −28.61 dB. Thus, the final optimized structure is also being fabricated for the authentication of simulated results. Both the results are compared and found in agreement with each other. The rest of the parameters such as gain, radiation efficiency and radiation patterns are analyzed and found satisfactory for the wireless operations. Due to the wider bandwidth and proper impedance matching in the desired frequency ranges, the proposed antenna can be considered as a proficient candidate for distinct wireless applications.
- 3 June 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (9) , e22762
Comparative analysis of hybrid fractal antennas: A review
- 3 June 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (9) , e22762
Comparative analysis of hybrid fractal antennas: A review
- 17 May 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 35 (15) , 1959-1979
Peano–Gosper, Koch and Minkowski fractal curves-based novel hybrid antenna using modified partial ground plane for multi-standard wireless applications
This paper presents the unique structure of a hybrid antenna with a blend of Peano–Gosper, Koch and Minkowski curves using a modified partial ground plane for multi-standard wireless applications. Initially, the Minkowski and Koch curves are amalgamated by using a versatile mathematical tool called Iterative Function System (IFS), and furthermore, their resultant structure is superimposed on each segment of Peano–Gosper curve to obtain the novel geometry of hybrid fractal antenna named Gosper–Koch–Minkowski Hybrid Fractal Antenna (GKMHFA). The partial ground plane with 50 Ω transmission line fed is used to analyse the performance of designed structure and found that it exhibits five different frequency bands above 9 GHz in the frequency range 1–20 GHz. Consequently, to attain the frequency bands below 9 GHz with enhanced bandwidth and reflection coefficient, the partial ground plane has been modified. The proposed antenna with the modified ground plane reveals seven distinct frequency points 1.5, 3.4, 8.6, 12.2, 14.1, 15.3 and 18.9 GHz with a maximum bandwidth 5.0 GHz along with improved reflection coefficient i.e. −45.65 dB at 1.5 GHz. The proposed antenna also reports positive gain and stable radiation patterns in the operational frequency bands, which make it a proficient candidate for the multi-standard wireless applications such as GPS, terrestrial communication, PCS, UMTS, advance wireless services, Bluetooth, WLAN, Wi-Fi, Wi-MAX, military satellite communication, television broadcasting, broadcasting satellite, FSS, Ku-band and K-band.
- 17 May 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 35 (15) , 1959-1979
Peano–Gosper, Koch and Minkowski fractal curves-based novel hybrid antenna using modified partial ground plane for multi-standard wireless applications
This paper presents the unique structure of a hybrid antenna with a blend of Peano–Gosper, Koch and Minkowski curves using a modified partial ground plane for multi-standard wireless applications. Initially, the Minkowski and Koch curves are amalgamated by using a versatile mathematical tool called Iterative Function System (IFS), and furthermore, their resultant structure is superimposed on each segment of Peano–Gosper curve to obtain the novel geometry of hybrid fractal antenna named Gosper–Koch–Minkowski Hybrid Fractal Antenna (GKMHFA). The partial ground plane with 50 Ω transmission line fed is used to analyse the performance of designed structure and found that it exhibits five different frequency bands above 9 GHz in the frequency range 1–20 GHz. Consequently, to attain the frequency bands below 9 GHz with enhanced bandwidth and reflection coefficient, the partial ground plane has been modified. The proposed antenna with the modified ground plane reveals seven distinct frequency points 1.5, 3.4, 8.6, 12.2, 14.1, 15.3 and 18.9 GHz with a maximum bandwidth 5.0 GHz along with improved reflection coefficient i.e. −45.65 dB at 1.5 GHz. The proposed antenna also reports positive gain and stable radiation patterns in the operational frequency bands, which make it a proficient candidate for the multi-standard wireless applications such as GPS, terrestrial communication, PCS, UMTS, advance wireless services, Bluetooth, WLAN, Wi-Fi, Wi-MAX, military satellite communication, television broadcasting, broadcasting satellite, FSS, Ku-band and K-band.
- 8 April 2021
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 109 (2) , 317-336
Edge-Coupled Parasitic Split Ring Resonator based Metamaterial Inspired Low-Cost Diamond Shaped Fractal Antenna for Multiband Wireless Applications
The metamaterial inspired low-cost diamond shaped fractal antenna (DSFA) based on edge-coupled (EC) parasitic split ring resonator (SRR) for multiband wireless application is presented and investigated in this manuscript. Initially, three iterations of DSFA are designed and found that 2nd iteration reveals the more number of frequency bands as compared to the other iterations. For proper impedance matching characteristics, partial ground plane has been introduced in the designing of antenna and low-cost FR4 glass epoxy substrate with thickness 1.6mm is used with overall size of 32 × 36 mm2. Further, the EC parasitic SRR is loaded in the geometry of proposed antenna and compared with unloaded antenna and noted that loaded antenna reports the better results in terms of bandwidth and reflection coefficient. Loaded antenna exhibits the maximum bandwidth 5.68GHz (1.67 – 7.34GHz) and a maximum gain 8.63dB at 2.3GHz and 9.90dB at 19.9GHz. The prototype of proposed DSFA has been fabricated and tested for the authentication of measured results with the simulated results, and found both are in agreement with each other. Proposed DSFA with EC parasitic SRR is best suitable for different wireless applications because of its multiband behavior.
- 8 April 2021
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 109 (2) , 317-336
Edge-Coupled Parasitic Split Ring Resonator based Metamaterial Inspired Low-Cost Diamond Shaped Fractal Antenna for Multiband Wireless Applications
The metamaterial inspired low-cost diamond shaped fractal antenna (DSFA) based on edge-coupled (EC) parasitic split ring resonator (SRR) for multiband wireless application is presented and investigated in this manuscript. Initially, three iterations of DSFA are designed and found that 2nd iteration reveals the more number of frequency bands as compared to the other iterations. For proper impedance matching characteristics, partial ground plane has been introduced in the designing of antenna and low-cost FR4 glass epoxy substrate with thickness 1.6mm is used with overall size of 32 × 36 mm2. Further, the EC parasitic SRR is loaded in the geometry of proposed antenna and compared with unloaded antenna and noted that loaded antenna reports the better results in terms of bandwidth and reflection coefficient. Loaded antenna exhibits the maximum bandwidth 5.68GHz (1.67 – 7.34GHz) and a maximum gain 8.63dB at 2.3GHz and 9.90dB at 19.9GHz. The prototype of proposed DSFA has been fabricated and tested for the authentication of measured results with the simulated results, and found both are in agreement with each other. Proposed DSFA with EC parasitic SRR is best suitable for different wireless applications because of its multiband behavior.
- 3 November 2020
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (1)
Design of printedUWBantenna withCPWandmicrostrip‐line‐fedforDCS/PCS/bluetooth/WLANwireless applications
- 3 November 2020
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (1)
Design of printedUWBantenna withCPWandmicrostrip‐line‐fedforDCS/PCS/bluetooth/WLANwireless applications
- Open Access
- 14 July 2020
- Published by Wiley in Engineering Reports
- Vol. 2 (10) , e12239
Electromagnetic bandgap structure and split ring slot‐based monopole antenna for ultra‐wideband applications with dual band notch characteristics
Reduced lightweight microstrip patch antennas have attracted considerable attention in ultra‐wideband (UWB) applications. In this article, a novel modified circular ultra‐wideband monopole antenna with dual‐band notch characteristics is proposed. A circular split‐ring slot and a mushroom‐electromagnetic bandgap‐type structure are employed to realize the dual‐band notch characteristics. The proposed antenna exhibits the bandwidth of 2.0‐12 GHz with a Voltage Standing Wave Ratio <2 except at the WiMAX band of 3.2‐3.7 GHz and wireless local area network band of 5.1‐5.8 GHz. The simulated and measured results of the proposed antenna, along with the design parameters, are reported and discussed in detail. The results show that the antenna is suitable for UWB applications.
- 14 July 2020
- Published by Wiley in Engineering Reports
- Vol. 2 (10) , e12239
Open AccessElectromagnetic bandgap structure and split ring slot‐based monopole antenna for ultra‐wideband applications with dual band notch characteristics
Reduced lightweight microstrip patch antennas have attracted considerable attention in ultra‐wideband (UWB) applications. In this article, a novel modified circular ultra‐wideband monopole antenna with dual‐band notch characteristics is proposed. A circular split‐ring slot and a mushroom‐electromagnetic bandgap‐type structure are employed to realize the dual‐band notch characteristics. The proposed antenna exhibits the bandwidth of 2.0‐12 GHz with a Voltage Standing Wave Ratio <2 except at the WiMAX band of 3.2‐3.7 GHz and wireless local area network band of 5.1‐5.8 GHz. The simulated and measured results of the proposed antenna, along with the design parameters, are reported and discussed in detail. The results show that the antenna is suitable for UWB applications.
- Open Access
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 97, 133-144
A COMPACT WIDEBAND ANTENNA USING PARTIAL GROUND PLANE WITH TRUNCATED CORNERS, L – SHAPED STUBS AND INVERTED T – SHAPED SLOTS
The design of a wideband antenna using truncated corners partial ground plane loaded with L-shaped stubs and inverted T-shaped slots has been presented in this manuscript. The different concepts and structures related to antenna designing have been employed to attain the optimized model of antenna. L-shaped stubs and inverted T-shaped slots incised in the structure of antenna improve the impedance matching and bandwidth of the proposed antenna. A fed 50 Ω microstrip line has been applied to the proposed structure for attaining distinct performance parameters like reflection coefficient, gain, and radiation pattern. The distinct structures of proposed antenna have been juxtaposed, and it is found that the structure with L-shaped stubs and inverted T-shaped slots shows improved antenna performance parameters. The designed antenna exhibits the bandwidth of 133.04% (3.14-15.62 GHz) and 16.96% (18.56-22.0 GHz) with improved reflection coefficient and gain. The proposed antenna has also been fabricated and tested for the validation of simulated and measured results, and found in good agreement with each other. The design of proposed antenna is carved on a low cost thick substrate with compact electrical size of 0.566λ × 0.452λ × 0.0301λ mm 3 at 5.45 GHz frequency and can be used for different wireless applications in the frequency range 3.14-15.62 GHz and 18.56-22.0 GHz.
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 97, 133-144
Open AccessA COMPACT WIDEBAND ANTENNA USING PARTIAL GROUND PLANE WITH TRUNCATED CORNERS, L – SHAPED STUBS AND INVERTED T – SHAPED SLOTS
The design of a wideband antenna using truncated corners partial ground plane loaded with L-shaped stubs and inverted T-shaped slots has been presented in this manuscript. The different concepts and structures related to antenna designing have been employed to attain the optimized model of antenna. L-shaped stubs and inverted T-shaped slots incised in the structure of antenna improve the impedance matching and bandwidth of the proposed antenna. A fed 50 Ω microstrip line has been applied to the proposed structure for attaining distinct performance parameters like reflection coefficient, gain, and radiation pattern. The distinct structures of proposed antenna have been juxtaposed, and it is found that the structure with L-shaped stubs and inverted T-shaped slots shows improved antenna performance parameters. The designed antenna exhibits the bandwidth of 133.04% (3.14-15.62 GHz) and 16.96% (18.56-22.0 GHz) with improved reflection coefficient and gain. The proposed antenna has also been fabricated and tested for the validation of simulated and measured results, and found in good agreement with each other. The design of proposed antenna is carved on a low cost thick substrate with compact electrical size of 0.566λ × 0.452λ × 0.0301λ mm 3 at 5.45 GHz frequency and can be used for different wireless applications in the frequency range 3.14-15.62 GHz and 18.56-22.0 GHz.