Peyman Mohammadmoradi
Research Subjects
Peyman Mohammadmoradi has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Apostolos Kantzas
21 shared publicationsDoug Angus
ESG Solutions
8 shared publicationsSaeed Taheri
5 shared publicationsArash Behrang
4 shared publications- Apostolos Kantzas
Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada
3 shared publications Banafsheh Goudarzi
2 shared publications
Latest Publications
- 25 January 2022
- Published by Society of Petroleum Engineers (SPE)
Hydraulic Fracture Width Inversion Using Simultaneous Downhole Tiltmeter and Distributed Acoustic Sensing Data
A new geomechanical modeling approach is presented to estimate hydraulic fracture width based upon joint inversion of near-field and far-field slow deformation data measured, respectively, by Distributed Acoustic Sensing (DAS) and Downhole Tiltmeter Fracture Mapping (DTFM) systems. Each measurement provides a unique and different perspective of the fracture. By substantially reducing the non-uniqueness of possible interpretations, integrating simultaneous deformation measurements allows us to resolve the fracture opening with higher confidence and resolution. We provide a step-by-step modeling workflow, verify our approach using synthetic data, and quantify the uncertainty. To our knowledge, no prior studies have attempted to quantitatively integrate DTFM and low-frequency DAS to obtain estimates of fracture geometry. The resulting correlation between fracture opening and fiber strain can then be applied to other stages in the treatment well that fall outside the detectability range of DTFM and only have fiber data available.
- 25 January 2022
- Published by Society of Petroleum Engineers (SPE)
Hydraulic Fracture Width Inversion Using Simultaneous Downhole Tiltmeter and Distributed Acoustic Sensing Data
A new geomechanical modeling approach is presented to estimate hydraulic fracture width based upon joint inversion of near-field and far-field slow deformation data measured, respectively, by Distributed Acoustic Sensing (DAS) and Downhole Tiltmeter Fracture Mapping (DTFM) systems. Each measurement provides a unique and different perspective of the fracture. By substantially reducing the non-uniqueness of possible interpretations, integrating simultaneous deformation measurements allows us to resolve the fracture opening with higher confidence and resolution. We provide a step-by-step modeling workflow, verify our approach using synthetic data, and quantify the uncertainty. To our knowledge, no prior studies have attempted to quantitatively integrate DTFM and low-frequency DAS to obtain estimates of fracture geometry. The resulting correlation between fracture opening and fiber strain can then be applied to other stages in the treatment well that fall outside the detectability range of DTFM and only have fiber data available.
- 1 September 2021
- Published by Society of Exploration Geophysicists
- Vol. 1, 1751-1755
Integrating microdeformation and microseismicity to better resolve hydraulic fracture height
Here we give examples of integration of microseismic and downhole tiltmeter fracture mapping. The joint data inversion enables us to resolve induced fracture dimensions in two hydraulically fractured horizontal wells in an unconventional reservoir. Furthermore, the integration facilitates learning from microseismicity where the findings are applied to other frac stages in each case study outside the tiltmeters’ detectability range.
- 1 September 2021
- Published by Society of Exploration Geophysicists
- Vol. 1, 1751-1755
Integrating microdeformation and microseismicity to better resolve hydraulic fracture height
Here we give examples of integration of microseismic and downhole tiltmeter fracture mapping. The joint data inversion enables us to resolve induced fracture dimensions in two hydraulically fractured horizontal wells in an unconventional reservoir. Furthermore, the integration facilitates learning from microseismicity where the findings are applied to other frac stages in each case study outside the tiltmeters’ detectability range.
- Open Access
- 1 September 2021
- Published by Elsevier in Results in Engineering
- Vol. 11
SERA: An ISIP analysis approach to estimate fracture height and correlate stress escalation and relaxation in multifrac horizontal wells
- 1 September 2021
- Published by Elsevier in Results in Engineering
- Vol. 11
Open AccessSERA: An ISIP analysis approach to estimate fracture height and correlate stress escalation and relaxation in multifrac horizontal wells
- 24 September 2020
- Published by Society of Petroleum Engineers (SPE)
Learning from Behavioral Frac Maps: A Montney Case Study in Integration of Modern Microseismic and Production Data Analyses
Aimed at sharing the unconventional wisdom gained from a hydraulic fracturing monitoring case study in the Montney tight gas play, the work showcases the ability of 4D modeling of collective behaviors of microseismic events to chase the frac fluid and navigate the spatiotemporal fracture evolution. Moreover, microseismicity-derived deformation fields are integrated with volumetric estimates made by rate transient analysis to calibrate spatially-constrained SRV models. Through the case study, we give evidence of fracture containment, evaluate the role of natural fractures and the use of diverting agents, estimate cluster efficiencies, conduct analytical well spacing optimization, model productivity decline induced by communication frac-hits from offsets, and provide contributing fracture dimensions and numerical production forecasts. To support the interpretations, we supplement the work by the results of 3D physics-based analytical modeling and multi-phase numerical simulations, and the findings are then validated using two extensive datasets: production profiles acquired by fiber optic DAS, and reservoir fluid fingerprints extracted from mud logs. Besides describing the evolution of seismicity during the treatment, the applied integrated fracture mapping process gives a more reliable and unique SRV structure that streamlines forward modeling and simulations in unconventional reservoirs as well as contributes to solving inverse problems more mechanistically.
- 24 September 2020
- Published by Society of Petroleum Engineers (SPE)
Learning from Behavioral Frac Maps: A Montney Case Study in Integration of Modern Microseismic and Production Data Analyses
Aimed at sharing the unconventional wisdom gained from a hydraulic fracturing monitoring case study in the Montney tight gas play, the work showcases the ability of 4D modeling of collective behaviors of microseismic events to chase the frac fluid and navigate the spatiotemporal fracture evolution. Moreover, microseismicity-derived deformation fields are integrated with volumetric estimates made by rate transient analysis to calibrate spatially-constrained SRV models. Through the case study, we give evidence of fracture containment, evaluate the role of natural fractures and the use of diverting agents, estimate cluster efficiencies, conduct analytical well spacing optimization, model productivity decline induced by communication frac-hits from offsets, and provide contributing fracture dimensions and numerical production forecasts. To support the interpretations, we supplement the work by the results of 3D physics-based analytical modeling and multi-phase numerical simulations, and the findings are then validated using two extensive datasets: production profiles acquired by fiber optic DAS, and reservoir fluid fingerprints extracted from mud logs. Besides describing the evolution of seismicity during the treatment, the applied integrated fracture mapping process gives a more reliable and unique SRV structure that streamlines forward modeling and simulations in unconventional reservoirs as well as contributes to solving inverse problems more mechanistically.
- 24 September 2020
- Published by Society of Petroleum Engineers (SPE)
Coupling Microseismic and Production Data Analysis to Optimize Well Spacing in Unconventional Reservoirs
Unconventional plays present a challenging case to design an optimized stimulation program and to maximize reservoir contact and hydrocarbon production. In this regard, conducting a reliable well spacing optimization study demands realistic and explicit fracture descriptions. This work applies an integrated technique to a multi-well case study in the Permian Basin to extract fracture dimensions based on microseismicity-derived behavioral fracture maps, while honoring the RTA-based estimates of the contributing fracture volume. The fracture dimensions are then used to conduct analytical and numerical studies to decide the optimal well spacing/placement design in the target formation. The numerical simulations in two stacked and staggered configurations confirm that although the staggered development causes a marginal decrease in the individual wells' performance, if successfully accomplished, it contributes to a higher vertical sweep efficiency from the section. Furthermore, comparing the approximations of failure planes, constructed based on the spatiotemporal analysis of microseismic events, with those achieved through seismic moment tensor inversion confirms that the collective behavior analysis gives fair estimates of fracture spatial evolutions.
- 24 September 2020
- Published by Society of Petroleum Engineers (SPE)
Coupling Microseismic and Production Data Analysis to Optimize Well Spacing in Unconventional Reservoirs
Unconventional plays present a challenging case to design an optimized stimulation program and to maximize reservoir contact and hydrocarbon production. In this regard, conducting a reliable well spacing optimization study demands realistic and explicit fracture descriptions. This work applies an integrated technique to a multi-well case study in the Permian Basin to extract fracture dimensions based on microseismicity-derived behavioral fracture maps, while honoring the RTA-based estimates of the contributing fracture volume. The fracture dimensions are then used to conduct analytical and numerical studies to decide the optimal well spacing/placement design in the target formation. The numerical simulations in two stacked and staggered configurations confirm that although the staggered development causes a marginal decrease in the individual wells' performance, if successfully accomplished, it contributes to a higher vertical sweep efficiency from the section. Furthermore, comparing the approximations of failure planes, constructed based on the spatiotemporal analysis of microseismic events, with those achieved through seismic moment tensor inversion confirms that the collective behavior analysis gives fair estimates of fracture spatial evolutions.
- 1 September 2020
- Published by EAGE Publications bv in First Break
- Vol. 38 (9) , 65-72
Fibre-optic sensing and microseismic monitoring evaluate and enhance hydraulic fracturing via real-time and post-treatment analysis
- 1 September 2020
- Published by EAGE Publications bv in First Break
- Vol. 38 (9) , 65-72
Fibre-optic sensing and microseismic monitoring evaluate and enhance hydraulic fracturing via real-time and post-treatment analysis
- Open Access
- 1 June 2020
- Published by Elsevier in Results in Engineering
- Vol. 6
Visualization of acoustically-assisted fluid flow in unconsolidated confined porous media
- 1 June 2020
- Published by Elsevier in Results in Engineering
- Vol. 6
Open AccessVisualization of acoustically-assisted fluid flow in unconsolidated confined porous media
- 1 January 2020
- Published by EAGE Publications bv
- Vol. 2020 (10) , 1-7
Techno-Economic Optimization of Well Spacing: A Case Study in the Marcellus Shale
- 1 January 2020
- Published by EAGE Publications bv
- Vol. 2020 (10) , 1-7
Techno-Economic Optimization of Well Spacing: A Case Study in the Marcellus Shale
- 1 October 2019
- Published by EAGE Publications bv in First Break
- Vol. 37 (10) , 65-72
Increasing confidence in estimating stimulated reservoir volume by integrating RTA and microseismic analysis
- 1 October 2019
- Published by EAGE Publications bv in First Break
- Vol. 37 (10) , 65-72
Increasing confidence in estimating stimulated reservoir volume by integrating RTA and microseismic analysis