Byeong Hyeon Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Byeong Hyeon Lee has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Sang Yeol Lee
Gachon University
3 shared publications Ahrum Sohn
School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, South Korea
1 shared publication- Akash Kumar
Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India
1 shared publication - Dae Hwan Kim
Kookmin University
1 shared publication - Hocheon Yoo
Department of Electronic Engineering Hanyang University Seoul Republic of Korea
1 shared publication - Hyongsuk Choo
Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Relationship between the Structural and Electronic Properties with Respect to Sub Band Gap States with Si Doping in Oxygen Rich Znsno Amorphous Oxide Semiconductor
The effect of Si doping in the presence of excess oxygen on the zinc-tin-oxide (ZTO) thin-film transistor is investigated. The threshold voltage increases from 3.86 to 10.8 V, and the ON current reduces from 4 × 10 -4 to 1.1 × 10 -4 A for the undoped and 1 wt% Si-doped ZTO transistor, respectively. The changes in the threshold voltage and the ON current are attributed to the suppression of free charge carriers due to excess oxygen in the film. The annihilation of oxygen vacancy-related defects states is substantiated by the density of states extracted from the photonic capacitance-voltage characteristic of the undoped and Si-doped ZTO thin-film transistors. Moreover, due to the high binding energy of Si and oxygen, excess oxygen is introduced into the film. The excessive oxygen forms the O-O ex dimer that acts as the electron trap and degrades the device's stability. From the bias stress measurement and the density of states extraction, it is concluded that 0.5 wt% doping of Si in ZTO is optimal for moderate device performance, less defects density, and high stability.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessRelationship between the Structural and Electronic Properties with Respect to Sub Band Gap States with Si Doping in Oxygen Rich Znsno Amorphous Oxide Semiconductor
The effect of Si doping in the presence of excess oxygen on the zinc-tin-oxide (ZTO) thin-film transistor is investigated. The threshold voltage increases from 3.86 to 10.8 V, and the ON current reduces from 4 × 10 -4 to 1.1 × 10 -4 A for the undoped and 1 wt% Si-doped ZTO transistor, respectively. The changes in the threshold voltage and the ON current are attributed to the suppression of free charge carriers due to excess oxygen in the film. The annihilation of oxygen vacancy-related defects states is substantiated by the density of states extracted from the photonic capacitance-voltage characteristic of the undoped and Si-doped ZTO thin-film transistors. Moreover, due to the high binding energy of Si and oxygen, excess oxygen is introduced into the film. The excessive oxygen forms the O-O ex dimer that acts as the electron trap and degrades the device's stability. From the bias stress measurement and the density of states extraction, it is concluded that 0.5 wt% doping of Si in ZTO is optimal for moderate device performance, less defects density, and high stability.
- Open Access
- 29 October 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (44)
Flexible artificial Si-In-Zn-O/ion gel synapse and its application to sensory-neuromorphic system for sign language translation
Flexible artificial synapses are fabricated with a SIZO/ion gel hybrid structure forming a polyimide substrate.
- 29 October 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (44)
Open AccessFlexible artificial Si-In-Zn-O/ion gel synapse and its application to sensory-neuromorphic system for sign language translation
Flexible artificial synapses are fabricated with a SIZO/ion gel hybrid structure forming a polyimide substrate.
- Open Access
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 180-186
Notice of Removal: Exceptionally Linear and Highly Sensitive Photo-Induced Unipolar Inverter Device
Oxide semiconductors are of particular interest in the field of integrated electronics due to their large-area fabrication, high uniformity, and superior performance. Here, we report an exceptionally sensitive photo-induced inverter device with high linearity based on the unipolar n-type channel material amorphous silicon indium zinc oxide (a-SIZO). The field-effect transistor (FET) based on a-SIZO exhibits maximum mobility of 9.8 cm 2 /Vs at $\text{V}_{\mathrm{ D}}$ of 5 V, high on/off ratio of $\sim 10^{6}$ , and stable threshold voltage ( $\text{V}_{\mathrm{ Th}}$ ) of −0.35 V. Additionally, the optical properties of the proposed FET include excellent $\text{V}_{\mathrm{ Th}}$ shift and photocurrent ( $\text{I}_{\mathrm{ photo}}$ ) with high linearity under various red-light illumination. The proposed enhancement-load type inverter device shows reliable electrical and optical characteristics with an inverter gain of 0.7 at $\text{V}_{\mathrm{ DD}}$ of 1 V and linear photo-response in terms of inverter gain and voltage shift, demonstrating promising potential in the field of integrated electronics for optoelectronic applications.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 180-186
Open AccessNotice of Removal: Exceptionally Linear and Highly Sensitive Photo-Induced Unipolar Inverter Device
Oxide semiconductors are of particular interest in the field of integrated electronics due to their large-area fabrication, high uniformity, and superior performance. Here, we report an exceptionally sensitive photo-induced inverter device with high linearity based on the unipolar n-type channel material amorphous silicon indium zinc oxide (a-SIZO). The field-effect transistor (FET) based on a-SIZO exhibits maximum mobility of 9.8 cm 2 /Vs at $\text{V}_{\mathrm{ D}}$ of 5 V, high on/off ratio of $\sim 10^{6}$ , and stable threshold voltage ( $\text{V}_{\mathrm{ Th}}$ ) of −0.35 V. Additionally, the optical properties of the proposed FET include excellent $\text{V}_{\mathrm{ Th}}$ shift and photocurrent ( $\text{I}_{\mathrm{ photo}}$ ) with high linearity under various red-light illumination. The proposed enhancement-load type inverter device shows reliable electrical and optical characteristics with an inverter gain of 0.7 at $\text{V}_{\mathrm{ DD}}$ of 1 V and linear photo-response in terms of inverter gain and voltage shift, demonstrating promising potential in the field of integrated electronics for optoelectronic applications.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (2) , 957-962
Electrode-Adaptive Thin-Film Integrated Logic Circuits
Amorphous oxide-based thin-film logic circuits have been fabricated using only an n-type amorphous silicon–zinc–tin–oxide (a-SZTO) channel layer with different source/drain electrodes. Enhancement-mode thin-film transistors (TFTs) were fabricated with oxide electrodes. Depletion-mode TFTs were fabricated with metal electrode. Work functions were measured by Kelvin probemicroscopy. The barrier heights ( $\Phi _{\textsf {B}}$ ) between the a-SZTO channel layer and the electrode were measured to be 1.831, 2.341, and 2.339 eV for the Ti/Al electrode, Indium–silicon–oxide (ISO) electrode, and indium–tin–oxide (ITO) electrode, respectively. The physicalmechanism on the variation of sheet and contact resistances was investigated using a transmission line method, and the change in the resistances is closely related to $\Phi _{\textsf {B}}$ . Inverters were fabricated, with different $V_{\textsf {TH}}$ values adopted simply by using different contact characteristics between various electrodes and the semiconductor channel. High values of voltage gains in inverters were obtained: 12.33 (ISO) and 11.75 (ITO) at $V_{\textsf {DD}}= 5$ V. Itwas also confirmed that more complicated n-type-based NAND and NOR thin-film circuits, implementedwith different electrodes, functioned as conventional logic circuits. This simple fabrication method of thin-film logic circuits opens the possibility of implementing next-generation stacked integrated circuit technology.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (2) , 957-962
Electrode-Adaptive Thin-Film Integrated Logic Circuits
Amorphous oxide-based thin-film logic circuits have been fabricated using only an n-type amorphous silicon–zinc–tin–oxide (a-SZTO) channel layer with different source/drain electrodes. Enhancement-mode thin-film transistors (TFTs) were fabricated with oxide electrodes. Depletion-mode TFTs were fabricated with metal electrode. Work functions were measured by Kelvin probemicroscopy. The barrier heights ( $\Phi _{\textsf {B}}$ ) between the a-SZTO channel layer and the electrode were measured to be 1.831, 2.341, and 2.339 eV for the Ti/Al electrode, Indium–silicon–oxide (ISO) electrode, and indium–tin–oxide (ITO) electrode, respectively. The physicalmechanism on the variation of sheet and contact resistances was investigated using a transmission line method, and the change in the resistances is closely related to $\Phi _{\textsf {B}}$ . Inverters were fabricated, with different $V_{\textsf {TH}}$ values adopted simply by using different contact characteristics between various electrodes and the semiconductor channel. High values of voltage gains in inverters were obtained: 12.33 (ISO) and 11.75 (ITO) at $V_{\textsf {DD}}= 5$ V. Itwas also confirmed that more complicated n-type-based NAND and NOR thin-film circuits, implementedwith different electrodes, functioned as conventional logic circuits. This simple fabrication method of thin-film logic circuits opens the possibility of implementing next-generation stacked integrated circuit technology.