Julien Godet
Research Subjects
Research Interests
Julien Godet has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Laurent Pizzagalli
Departement of Physics and Mechanics of Materials, Institut P′, CNRS UPR 3346, Université de Poitiers, SP2MI, Boulevard Marie et Pierre Curie, TSA 41123, 86073 Poitiers Cedex 9, France
14 shared publications Laurent Pizzagalli
12 shared publicationsSandrine Brochard
Pprime Institute, Department of Physics and Mechanics of Materials, UPR 3346 CNRS, University of Poitiers, BP 30179, 11 Boulevard Marie et Pierre Curie, 86962 Chasseneuil Futuroscope Cedex; France
12 shared publicationsS. Brochard
10 shared publications- Alfredo Pasquarello
École Polytechnique Fédérale de Lausanne (EPFL)
8 shared publications - Julien Guénolé
Université de Lorraine CNRS Arts et Métiers LEM3 F-57070 Metz France
7 shared publications
Latest Publications
- Open Access
- 15 July 2025
- Published by Elsevier in Computational Materials Science
- Vol. 258
Twinning and amorphization as plasticity mechanisms in ultra small tungsten nanoparticles
- 15 July 2025
- Published by Elsevier in Computational Materials Science
- Vol. 258
Open AccessTwinning and amorphization as plasticity mechanisms in ultra small tungsten nanoparticles
- 19 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 086001
Structural stability of tungsten nanoparticles
Motivated by contradicting reports in the literature, we have investigated the structural stability of tungsten nanoparticles using density functional theory calculations. The comparison of BCC, FCC, A15, disordered, and icosahedral configurations unequivocally shows that BCC is, energetically, the most stable structure when the number of atoms is greater than 40. A disordered structure is more stable for smaller sizes. This result conflicts with an earlier theoretical study on transition metal nanoparticles, based on a semi-empirical modeling of nanoparticles energetics [D. Tománek et al., Phys. Rev. B 28, 665 (1983)]. Examining this latter work in the light of our results suggests that an inappropriate description of cluster geometry is the source of the discrepancy. Finally, we improve the accuracy of the semi-empirical model proposed in this work, which will be useful to calculate nanoparticle energies for larger sizes.
- 19 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 086001
Structural stability of tungsten nanoparticles
Motivated by contradicting reports in the literature, we have investigated the structural stability of tungsten nanoparticles using density functional theory calculations. The comparison of BCC, FCC, A15, disordered, and icosahedral configurations unequivocally shows that BCC is, energetically, the most stable structure when the number of atoms is greater than 40. A disordered structure is more stable for smaller sizes. This result conflicts with an earlier theoretical study on transition metal nanoparticles, based on a semi-empirical modeling of nanoparticles energetics [D. Tománek et al., Phys. Rev. B 28, 665 (1983)]. Examining this latter work in the light of our results suggests that an inappropriate description of cluster geometry is the source of the discrepancy. Finally, we improve the accuracy of the semi-empirical model proposed in this work, which will be useful to calculate nanoparticle energies for larger sizes.
- 4 December 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 131 (23) , 236201
Ultrahigh Strength and Plasticity Mechanisms of Si and SiC Nanoparticles Revealed by First-Principles Molecular Dynamics
It is now well established that materials are stronger when their dimensions are reduced to the submicron scale. However, what happens at dimensions such as a few tens of nanometers or lower remains largely unknown, with conflicting reports on strength or plasticity mechanisms. Here, we combined first-principles molecular dynamics and classical force fields to investigate the mechanical properties of 1–2 nm Si and SiC nanoparticles. These compression simulations unambiguously reveal that the strength continues to increase down to such sizes, and that in these systems the theoretical bulk strength can be reached or even exceeded in some cases. Most of the nanoparticles yield by amorphization at strains greater than 20%, with no evidence of the -tin phase for Si. Original and unexpected mechanisms are also identified, such as the homogeneous formation of a dislocation loop embryo for the compression of SiC nanoparticles, and an elastic softening for the compression of Si nanoparticles.- 4 December 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 131 (23) , 236201
Ultrahigh Strength and Plasticity Mechanisms of Si and SiC Nanoparticles Revealed by First-Principles Molecular Dynamics
It is now well established that materials are stronger when their dimensions are reduced to the submicron scale. However, what happens at dimensions such as a few tens of nanometers or lower remains largely unknown, with conflicting reports on strength or plasticity mechanisms. Here, we combined first-principles molecular dynamics and classical force fields to investigate the mechanical properties of 1–2 nm Si and SiC nanoparticles. These compression simulations unambiguously reveal that the strength continues to increase down to such sizes, and that in these systems the theoretical bulk strength can be reached or even exceeded in some cases. Most of the nanoparticles yield by amorphization at strains greater than 20%, with no evidence of the -tin phase for Si. Original and unexpected mechanisms are also identified, such as the homogeneous formation of a dislocation loop embryo for the compression of SiC nanoparticles, and an elastic softening for the compression of Si nanoparticles.- 20 November 2023
- Published by Elsevier in Thin Solid Films
- Vol. 787
Experimental characterization of quasi-2-dimension nanoporous gold ultra-thin film from nano to micro length scale
- 20 November 2023
- Published by Elsevier in Thin Solid Films
- Vol. 787
Experimental characterization of quasi-2-dimension nanoporous gold ultra-thin film from nano to micro length scale
- 17 November 2023
- Published by Elsevier in Scripta Materialia
- Vol. 241
First-principles molecular dynamics compression of small metallic nanoparticles
- 17 November 2023
- Published by Elsevier in Scripta Materialia
- Vol. 241
First-principles molecular dynamics compression of small metallic nanoparticles
- 11 September 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (9) , 093603
Stacking fault formation created by plastic deformation at low temperature and small scales in silicon
Several studies have recently reported the formation of stacking faults in silicon compressed at low temperatures and high stresses. This observation contradicts the generally accepted framework for the plastic deformation of silicon. We propose here an original plasticity mechanism that could potentially explain stacking fault formation in these conditions: the nucleation and migration of a partial edge dislocation with Burgers vector . These results are obtained thanks to a multiscale approach combining three computational methods. Dislocation nucleation is determined by molecular dynamics in both a nanowire and a 2D slab. The latter results are used as inputs for hybrid MD/DFT “learn on the fly” calculations, allowing for studying the dynamical propagation of the dislocation. Selected configurations at different steps are next used for initiating nudged elastic band density functional theory calculations. These calculations revealed that the dislocation displacement mechanism depends on the compression strain. For low values, a dangling bond is temporarily created in the core, resulting in high activation energies. For compression strains larger than about 8%, the reduction of the interlayer distance allows for a more complex displacement mechanism with no dangling bonds in the dislocation core and a significant decrease of the activation energy.- 11 September 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (9) , 093603
Stacking fault formation created by plastic deformation at low temperature and small scales in silicon
Several studies have recently reported the formation of stacking faults in silicon compressed at low temperatures and high stresses. This observation contradicts the generally accepted framework for the plastic deformation of silicon. We propose here an original plasticity mechanism that could potentially explain stacking fault formation in these conditions: the nucleation and migration of a partial edge dislocation with Burgers vector . These results are obtained thanks to a multiscale approach combining three computational methods. Dislocation nucleation is determined by molecular dynamics in both a nanowire and a 2D slab. The latter results are used as inputs for hybrid MD/DFT “learn on the fly” calculations, allowing for studying the dynamical propagation of the dislocation. Selected configurations at different steps are next used for initiating nudged elastic band density functional theory calculations. These calculations revealed that the dislocation displacement mechanism depends on the compression strain. For low values, a dangling bond is temporarily created in the core, resulting in high activation energies. For compression strains larger than about 8%, the reduction of the interlayer distance allows for a more complex displacement mechanism with no dangling bonds in the dislocation core and a significant decrease of the activation energy.- 12 June 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (6) , 065402
Empirical potential optimization for the investigation of lithiation-delithiation cycles of amorphous Si nanowires
The atomistic mechanisms during lithiation and delithiation of amorphous Si nanowires (-SiNW) have been investigated over cycles by molecular dynamics simulations. First, the modified embedded atom method potential from Cui et al. [ J. Power Sources 207, 150 (2012).] has been further optimized on static ( alloy phases and point-defect energies) and on dynamic properties (Li diffusion) to reproduce the lithiation of small crystalline Si nanowires calculated at the ab initio level. The lithiation of -SiNW reveals a two-phase process of lithiation with a larger diffusion interface compared to crystalline Si lithiation. Compressive axial stresses are observed in the amorphous alloy outer shell. They are easily released thanks to the soft glassy behavior of the amorphous alloy. Conversely, in crystalline SiNW, the larger stress in the narrow crystalline lithiated interface is hardly released and requires a phase transformation to amorphous to operate, which delays the lithiation. The history of the charge-discharge cycles as well as the temperature appear as driving forces for phase transformation from amorphous alloy to the more stable crystalline phase counterpart. Our work suggests that a SiNW anode with an enhanced plastic behavior could help release the internal stress, while a full delithiation could heal the cracks that appear with time and thus increase the life cycles of Li-ion batteries using such anode materials.- 12 June 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (6) , 065402
Empirical potential optimization for the investigation of lithiation-delithiation cycles of amorphous Si nanowires
The atomistic mechanisms during lithiation and delithiation of amorphous Si nanowires (-SiNW) have been investigated over cycles by molecular dynamics simulations. First, the modified embedded atom method potential from Cui et al. [ J. Power Sources 207, 150 (2012).] has been further optimized on static ( alloy phases and point-defect energies) and on dynamic properties (Li diffusion) to reproduce the lithiation of small crystalline Si nanowires calculated at the ab initio level. The lithiation of -SiNW reveals a two-phase process of lithiation with a larger diffusion interface compared to crystalline Si lithiation. Compressive axial stresses are observed in the amorphous alloy outer shell. They are easily released thanks to the soft glassy behavior of the amorphous alloy. Conversely, in crystalline SiNW, the larger stress in the narrow crystalline lithiated interface is hardly released and requires a phase transformation to amorphous to operate, which delays the lithiation. The history of the charge-discharge cycles as well as the temperature appear as driving forces for phase transformation from amorphous alloy to the more stable crystalline phase counterpart. Our work suggests that a SiNW anode with an enhanced plastic behavior could help release the internal stress, while a full delithiation could heal the cracks that appear with time and thus increase the life cycles of Li-ion batteries using such anode materials.- Open Access
- 1 May 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1190 (1) , 012007
Propagation of stacking faults from “composite” dislocation cores at low temperature in silicon nanostructures
The unexpected occurrence of extended stacking faults in silicon nanostructures at high stress and low temperature is discussed. It is shown that those stacking faults result from the operation of “composite” dislocation core structures. It is demonstrated that such cores allow for the propagation of partial dislocations in the shuffle set with the benefit of a low Peierls stress. A classical atomistic calculation confirms indeed that shuffle partial dislocations can move under a shear stress of about 3.3 GPa (5.5% shear strain) at room temperature.
- 1 May 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1190 (1) , 012007
Open AccessPropagation of stacking faults from “composite” dislocation cores at low temperature in silicon nanostructures
The unexpected occurrence of extended stacking faults in silicon nanostructures at high stress and low temperature is discussed. It is shown that those stacking faults result from the operation of “composite” dislocation core structures. It is demonstrated that such cores allow for the propagation of partial dislocations in the shuffle set with the benefit of a low Peierls stress. A classical atomistic calculation confirms indeed that shuffle partial dislocations can move under a shear stress of about 3.3 GPa (5.5% shear strain) at room temperature.
- Open Access
- 1 May 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1190 (1) , 012004
Plastic behaviour and deformation mechanisms in silicon nano-objects
Physical properties of nano-objects differ from what they are in bulk materials when the size decreases down to the nanometre scale. This behavioural change, named size effect, also applies to mechanical properties and has been evidenced in various materials. For instance, at low temperature, bulk silicon is known to be a brittle material while silicon nano-objects exhibit a ductile behavior. Although mechanical properties of silicon have been intensively studied over the last decades, the origin of this remarkable brittle-to-ductile transition at small scales remains, however, undetermined. In this article, a study of the plastic behaviour of nano-pillars is reported. The main results obtained from the combination of numerical calculations and experimental compression tests followed by atomically-resolved transmission electron microscopy imaging are described. We discuss the possibility for perfect dislocations to dissociate at low temperature and the underrated role of shuffle partial dislocations in plastic deformation of silicon. The formation of unexpected extended defects in the {115} planes with increasing plastic strain, also appears as a key-factor leading to the transition between ductile and brittle regimes at small scales.
- 1 May 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1190 (1) , 012004
Open AccessPlastic behaviour and deformation mechanisms in silicon nano-objects
Physical properties of nano-objects differ from what they are in bulk materials when the size decreases down to the nanometre scale. This behavioural change, named size effect, also applies to mechanical properties and has been evidenced in various materials. For instance, at low temperature, bulk silicon is known to be a brittle material while silicon nano-objects exhibit a ductile behavior. Although mechanical properties of silicon have been intensively studied over the last decades, the origin of this remarkable brittle-to-ductile transition at small scales remains, however, undetermined. In this article, a study of the plastic behaviour of nano-pillars is reported. The main results obtained from the combination of numerical calculations and experimental compression tests followed by atomically-resolved transmission electron microscopy imaging are described. We discuss the possibility for perfect dislocations to dissociate at low temperature and the underrated role of shuffle partial dislocations in plastic deformation of silicon. The formation of unexpected extended defects in the {115} planes with increasing plastic strain, also appears as a key-factor leading to the transition between ductile and brittle regimes at small scales.
- 1 April 2019
- Published by Elsevier in Computational Materials Science
- Vol. 161, 135-142
A fully molecular dynamics-based method for modeling nanoporous gold
- 1 April 2019
- Published by Elsevier in Computational Materials Science
- Vol. 161, 135-142
A fully molecular dynamics-based method for modeling nanoporous gold