Xiaodong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaodong Wang has a total of 191 co-authors. Here are the top co-authors by number of shared publications:
- Jun Shen
University of Wollongong
39 shared publications Chen Zhang
10 shared publicationsJun Shen
School of Physics Science and Engineering Tongji University Shanghai China
10 shared publicationsXiaoxue Zhang
School of Physics Science and Engineering Tongji University Shanghai China
9 shared publicationsYu Wu
8 shared publications- Zhenglong Yang
School of Materials Science and Engineering Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education Tongji University Shanghai China
8 shared publications
Latest Publications
- Open Access
- 21 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (45) , e73935
Evolution‐Driven Bio‐Composite Aerogels for Self‐Adaptive Thermal Regulation and Energy Storage
Nature achieves remarkable multifunctionality by integrating chemically dissimilar phases into hierarchically organized architectures. Inspired by this principle, we develop a simple and universal strategy to construct bio‐composite aerogels by incorporating trivalent metal chlorides (MCl 3 ) into biopolymer chitosan (CTS) matrices. Coordination‐driven assembly in aqueous media enables the direct formation of metal ion‐coordinated chitosan (CTS–M) aerogels without external acids or additional crosslinkers. These aerogels exhibit reversible brittle‐to‐flexible transitions under humidity stimuli, together with exceptional mechanical resilience, enabling self‐adaptive thermal insulation under temperature extremes. Upon pyrolysis, the same precursor is converted into conductive carbon–metal oxide (C–M 2 O 3 ) aerogels, where metal oxide nanocrystals are embedded within an interconnected carbon framework. This structural integration couples a continuous electron‐transport network with redox‐active domains, thereby promoting charge‐transfer and increasing accessible storage sites. As a representative example, the C–V 2 O 3 cathode for aqueous zinc‐ion batteries (ZIBs) delivers excellent energy–power performance (656 Wh kg −1 at 200 W kg −1 , 178 Wh kg −1 at ∼20 000 W kg −1 ) with 85% capacity retention after 10 000 cycles, outperforming previously reported carbon–metal oxide systems. By linking adaptive thermal regulation and electrochemical energy storage through a single precursor‐to‐function pathway, this work establishes an evolution‐driven aerogel design paradigm for next‐generation multifunctional materials.
- 21 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (45) , e73935
Open AccessEvolution‐Driven Bio‐Composite Aerogels for Self‐Adaptive Thermal Regulation and Energy Storage
Nature achieves remarkable multifunctionality by integrating chemically dissimilar phases into hierarchically organized architectures. Inspired by this principle, we develop a simple and universal strategy to construct bio‐composite aerogels by incorporating trivalent metal chlorides (MCl 3 ) into biopolymer chitosan (CTS) matrices. Coordination‐driven assembly in aqueous media enables the direct formation of metal ion‐coordinated chitosan (CTS–M) aerogels without external acids or additional crosslinkers. These aerogels exhibit reversible brittle‐to‐flexible transitions under humidity stimuli, together with exceptional mechanical resilience, enabling self‐adaptive thermal insulation under temperature extremes. Upon pyrolysis, the same precursor is converted into conductive carbon–metal oxide (C–M 2 O 3 ) aerogels, where metal oxide nanocrystals are embedded within an interconnected carbon framework. This structural integration couples a continuous electron‐transport network with redox‐active domains, thereby promoting charge‐transfer and increasing accessible storage sites. As a representative example, the C–V 2 O 3 cathode for aqueous zinc‐ion batteries (ZIBs) delivers excellent energy–power performance (656 Wh kg −1 at 200 W kg −1 , 178 Wh kg −1 at ∼20 000 W kg −1 ) with 85% capacity retention after 10 000 cycles, outperforming previously reported carbon–metal oxide systems. By linking adaptive thermal regulation and electrochemical energy storage through a single precursor‐to‐function pathway, this work establishes an evolution‐driven aerogel design paradigm for next‐generation multifunctional materials.
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (12) , 5435-5445
Polyimide Reinforced Silica Composite Aerogels with High Mechanical Properties and Low Thermal Conductivity for Thermal Insulation
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (12) , 5435-5445
Polyimide Reinforced Silica Composite Aerogels with High Mechanical Properties and Low Thermal Conductivity for Thermal Insulation
- Open Access
Aerogels—Preparation and Properties
Aerogels are ultra-light, nanoporous solid materials characterized by extremely high porosity, with up to 99
Open AccessAerogels—Preparation and Properties
Aerogels are ultra-light, nanoporous solid materials characterized by extremely high porosity, with up to 99
- 10 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 509
Elastic, flexible, and tough hierarchical polyimide aerogels with dynamic reversible physical entanglement structure
- 10 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 509
Elastic, flexible, and tough hierarchical polyimide aerogels with dynamic reversible physical entanglement structure
- 25 November 2024
- Published by Wiley in Small Methods
- Vol. 8 (12) , e2400544
Nano‐Silica‐Based Double‐Layer Antireflective Coatings with Mildew Resistance and Moisture Resistance for KDP Crystals
Sol–gel nano‐silica antireflective (AR) coatings with moisture resistance are widely used for optical elements, such as potassium dihydrogen phosphate (KDP) crystals, but their mildew resistance is often disregarded. This work reports a double‐layer AR coating with moisture resistance and mildew resistance for KDP crystals. A polydimethylsiloxane‐modified dense silica coating and a quaternary ammonium salt (QAS) modified nanoporous silica coating are selected as the bottom layer and top layer, which effectively serve as a moisture barrier and an antireflection layer, respectively. The coated KDP crystal shows excellent antireflection properties with a maximum transmittance of 99.1% at 532 nm. Perfluorooctyltriethoxysilane vapor treatment is performed further to improve the resistance to moisture and mildew. The resultant double‐layer coating exhibits superior moisture resistance with almost no change in optical transmittance after a 3‐month exposure to a high‐humidity environment. The introduction of QAS and hydrophobicity in the top layer provides exceptional resistance against mildew, achieving an antimicrobial rate of 99.9% against E. coli and A. flavus. Moreover, the laser‐induced damage threshold reaches 17.0 J cm −2 (355 nm, 4.5 ns). This work imparts moisture resistance and mildew resistance to AR coatings, providing valuable insights for designing multifunctional AR coatings on optical components.
- 25 November 2024
- Published by Wiley in Small Methods
- Vol. 8 (12) , e2400544
Nano‐Silica‐Based Double‐Layer Antireflective Coatings with Mildew Resistance and Moisture Resistance for KDP Crystals
Sol–gel nano‐silica antireflective (AR) coatings with moisture resistance are widely used for optical elements, such as potassium dihydrogen phosphate (KDP) crystals, but their mildew resistance is often disregarded. This work reports a double‐layer AR coating with moisture resistance and mildew resistance for KDP crystals. A polydimethylsiloxane‐modified dense silica coating and a quaternary ammonium salt (QAS) modified nanoporous silica coating are selected as the bottom layer and top layer, which effectively serve as a moisture barrier and an antireflection layer, respectively. The coated KDP crystal shows excellent antireflection properties with a maximum transmittance of 99.1% at 532 nm. Perfluorooctyltriethoxysilane vapor treatment is performed further to improve the resistance to moisture and mildew. The resultant double‐layer coating exhibits superior moisture resistance with almost no change in optical transmittance after a 3‐month exposure to a high‐humidity environment. The introduction of QAS and hydrophobicity in the top layer provides exceptional resistance against mildew, achieving an antimicrobial rate of 99.9% against E. coli and A. flavus. Moreover, the laser‐induced damage threshold reaches 17.0 J cm −2 (355 nm, 4.5 ns). This work imparts moisture resistance and mildew resistance to AR coatings, providing valuable insights for designing multifunctional AR coatings on optical components.
- Open Access
- 2 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Strong and Ultrahigh Temperature‐Resistant Metal Oxide Nanobelt Aerogels
Metal oxide aerogels, inorganic cousins of the highly commercialized metalloid oxide silica aerogels, exhibit distinct properties specific to each type. Nevertheless, they share a common challenge with silica aerogels—brittleness and low mechanical strength due to their particulate necklace‐like structure. In contrast, polymer aerogels often boast significantly enhanced mechanical properties thanks to their nanofibrillated networks. To enhance the mechanical properties of metal oxide aerogels, the metal oxide formation with a polymeric nanostructure is micro‐templated. This method transforms the necklace‐like particulate microstructure of metal oxide aerogels (e.g., Al2O3 Cr2O3, and Fe2O3) into a polymer‐like nanobelt structure. Remarkably, even after removing the polymer template through calcination at 600 °C, the nanobelt structure remains intact. These metal oxide nanobelt (MNB) aerogels exhibit exceptional compressibility while retaining their mesoporous structure. As a demonstration, the resulting Al‐MNB aerogel can withstand compression up to 80% strain without fracturing while preserving its porous nanobelt structure and a high specific surface area of 228 m2 g−1 and a pore volume of 0.7 cm3 g−1 after heat treatment at 1300 °C. This work introduces an innovative strategy for creating a distinctive polymer‐like nanobelt microstructure, paving the way for novel applications of metal oxide aerogels with unique structures and enhanced performance.
- 2 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Open AccessStrong and Ultrahigh Temperature‐Resistant Metal Oxide Nanobelt Aerogels
Metal oxide aerogels, inorganic cousins of the highly commercialized metalloid oxide silica aerogels, exhibit distinct properties specific to each type. Nevertheless, they share a common challenge with silica aerogels—brittleness and low mechanical strength due to their particulate necklace‐like structure. In contrast, polymer aerogels often boast significantly enhanced mechanical properties thanks to their nanofibrillated networks. To enhance the mechanical properties of metal oxide aerogels, the metal oxide formation with a polymeric nanostructure is micro‐templated. This method transforms the necklace‐like particulate microstructure of metal oxide aerogels (e.g., Al2O3 Cr2O3, and Fe2O3) into a polymer‐like nanobelt structure. Remarkably, even after removing the polymer template through calcination at 600 °C, the nanobelt structure remains intact. These metal oxide nanobelt (MNB) aerogels exhibit exceptional compressibility while retaining their mesoporous structure. As a demonstration, the resulting Al‐MNB aerogel can withstand compression up to 80% strain without fracturing while preserving its porous nanobelt structure and a high specific surface area of 228 m2 g−1 and a pore volume of 0.7 cm3 g−1 after heat treatment at 1300 °C. This work introduces an innovative strategy for creating a distinctive polymer‐like nanobelt microstructure, paving the way for novel applications of metal oxide aerogels with unique structures and enhanced performance.
- 28 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (23) , 30324-30335
Superhydrophobic Highly Flexible Triple-Network Polyorganosiloxane-Based Aerogels for Thermal Insulation, Oil–Water Separation, and Strain/Pressure Sensing
Polyvinylpolymethylsiloxane (PVPMS)/polydimethylsiloxane (PDMS) copolymer aerogels were synthesized via consecutive radical polymerization and cohydrolytic polycondensation of vinylmethyldimethoxysilane and dimethyldimethoxysilane, followed by supercritical drying or ambient pressure drying. The resultant PVPMS/PDMS copolymer aerogels exhibit a highly porous, tunable triple-network structure consisting of interlinked hydrocarbon polymers, PVPMS and PDMS. These aerogels display superhydrophobicity (151°), low density (109 mg cm-3), low thermal conductivity (29.8 mW m-1 K-1), and adjustable pore structure. The combination of good machinability, low thermal conductivity, excellent compressive elasticity and bending flexibility, and efficient organic solvent adsorption gives these aerogels broad application prospects in thermal insulation and oil-water separation. In addition, PVPMS/PDMS/carbon nanotube (CNT) composite aerogels were obtained by incorporating the conductive CNTs, followed by vacuum drying. The resultant PVPMS/PDMS/CNT composite aerogel exhibits high sensitivity with a broad pressure sensing range in strain and pressure sensing applications.
- 28 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (23) , 30324-30335
Superhydrophobic Highly Flexible Triple-Network Polyorganosiloxane-Based Aerogels for Thermal Insulation, Oil–Water Separation, and Strain/Pressure Sensing
Polyvinylpolymethylsiloxane (PVPMS)/polydimethylsiloxane (PDMS) copolymer aerogels were synthesized via consecutive radical polymerization and cohydrolytic polycondensation of vinylmethyldimethoxysilane and dimethyldimethoxysilane, followed by supercritical drying or ambient pressure drying. The resultant PVPMS/PDMS copolymer aerogels exhibit a highly porous, tunable triple-network structure consisting of interlinked hydrocarbon polymers, PVPMS and PDMS. These aerogels display superhydrophobicity (151°), low density (109 mg cm-3), low thermal conductivity (29.8 mW m-1 K-1), and adjustable pore structure. The combination of good machinability, low thermal conductivity, excellent compressive elasticity and bending flexibility, and efficient organic solvent adsorption gives these aerogels broad application prospects in thermal insulation and oil-water separation. In addition, PVPMS/PDMS/carbon nanotube (CNT) composite aerogels were obtained by incorporating the conductive CNTs, followed by vacuum drying. The resultant PVPMS/PDMS/CNT composite aerogel exhibits high sensitivity with a broad pressure sensing range in strain and pressure sensing applications.
- 4 October 2023
- Published by Elsevier in Applied Surface Science
- Vol. 642
Dominant factors for moisture resistance of sol–gel silica coatings: Surface chemical composition or inner microstructure?
- 4 October 2023
- Published by Elsevier in Applied Surface Science
- Vol. 642
Dominant factors for moisture resistance of sol–gel silica coatings: Surface chemical composition or inner microstructure?
- 25 August 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (37) , 13169-13180
A crosslinked network polypyrrole coated cobalt doped Fe2O3@carbon cloth flexible anode material for quasi-solid asymmetric supercapacitors
PPy/Co-Fe2O3@CC composites were prepared via a facile hydrothermal and polymerization method. The assembled PPy/Co-Fe2O3@CC//Ni-MnO2@CC flexible asymmetric supercapacitor exhibited excellent electrochemical performance.
- 25 August 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (37) , 13169-13180
A crosslinked network polypyrrole coated cobalt doped Fe2O3@carbon cloth flexible anode material for quasi-solid asymmetric supercapacitors
PPy/Co-Fe2O3@CC composites were prepared via a facile hydrothermal and polymerization method. The assembled PPy/Co-Fe2O3@CC//Ni-MnO2@CC flexible asymmetric supercapacitor exhibited excellent electrochemical performance.