Alisyn J. Nedoma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alisyn J. Nedoma has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
Megan L. Robertson
Department of Chemical Engineering, University of California, Berkeley, Berkeley, California 94720, United States
6 shared publicationsNitash P. Balsara
Department of Chemical Engineering, University of California, Berkeley, Berkeley, California 94720, United States
6 shared publications- Andrew J. Jackson
European Spallation Source, Box 176, 221 00 Lund, Sweden
5 shared publications Nisita S. Wanakule
Department of Chemical Engineering, University of California, Berkeley, Berkeley, California 94720, United States
5 shared publications- Samuel Guy Booth
The Faraday Institution, Quad One, Harwell Campus, Didcot OX11 0RA, U.K.
5 shared publications - Serena Ann Corr
The Faraday Institution
5 shared publications
Latest Publications
- Open Access
- 27 March 2026
- Published by Wiley
Optimizing the Performance of Water-processed LiNi 0.6 Mn 0.2 Co 0.2 O 2 Battery Half Cells by Blending Pluronic and Polyethylene oxide
Water-based cathode slurries for lithium-ion batteries can replace polyfluoroalkyl binders (PFAS) with biodegradable alternatives. Dispersing carbon black in water is the main formulation challenge. For the first time, an amphiphilic block copolymer, Pluronic F68, is blended with a water-soluble homopolymer, polyethylene oxide, to simultaneously disperse carbon black in water while controlling the viscosity of the slurry. Two series of binder blends are prepared: one systematically varies the viscosity of the binder solution, and the other systematically varies the solid loading of the slurry. These orthogonal series demonstrate that the polymer surfactant has a strong effect on half-cell performance independent of the role of viscosity. At the optimum formulation, water-processed half-cells using LiNi 0.6 Mn 0.2 Co 0.2 O 2 achieve a first specific discharge capacity up to 166 mAh g –1 and capacity retention of 89% after 100 cycles at 1C, comparable to cells made using a PFAS binder. Water-processed cells outperform the conventional cell at a fast charging rate of 5C. The results suggest that the affinity of the polymer binder(s) to carbon black, measured via adsorption, can be used as a selection criterion to identify binders that optimize the electrochemical performance of water-processed battery cells.
- 27 March 2026
- Published by Wiley
Open AccessOptimizing the Performance of Water-processed LiNi 0.6 Mn 0.2 Co 0.2 O 2 Battery Half Cells by Blending Pluronic and Polyethylene oxide
Water-based cathode slurries for lithium-ion batteries can replace polyfluoroalkyl binders (PFAS) with biodegradable alternatives. Dispersing carbon black in water is the main formulation challenge. For the first time, an amphiphilic block copolymer, Pluronic F68, is blended with a water-soluble homopolymer, polyethylene oxide, to simultaneously disperse carbon black in water while controlling the viscosity of the slurry. Two series of binder blends are prepared: one systematically varies the viscosity of the binder solution, and the other systematically varies the solid loading of the slurry. These orthogonal series demonstrate that the polymer surfactant has a strong effect on half-cell performance independent of the role of viscosity. At the optimum formulation, water-processed half-cells using LiNi 0.6 Mn 0.2 Co 0.2 O 2 achieve a first specific discharge capacity up to 166 mAh g –1 and capacity retention of 89% after 100 cycles at 1C, comparable to cells made using a PFAS binder. Water-processed cells outperform the conventional cell at a fast charging rate of 5C. The results suggest that the affinity of the polymer binder(s) to carbon black, measured via adsorption, can be used as a selection criterion to identify binders that optimize the electrochemical performance of water-processed battery cells.
- Open Access
- 16 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (20) , 12381-12393
Effect of binder viscosity on the rheology of cathode slurries and performance of lithium-ion battery half cells
Reliably benchmarking the performance of new cathode materials is an ongoing challenge in the development of high-capacity lithium-ion batteries. {Small variations in the formulation or processing of a cathode can severely affect the performance of the resulting battery cell.} Understanding and controlling interactions between the binder and other slurry components will enable faster, more rationalised battery cell optimisation. For the first time, this work systematically varies the viscosity of polyvinylidene fluoride (PVDF) binder solutions across a decade (15 to 320 mPa·s) whilst holding constant the solid loading of carbon black (CB) and cathode active material LiNi0.8Mn0.1Co0.1O2; NMC811). Steric stabilisation, rather than depletion or flocculation, is shown to be the mechanism by which PVDF modulates the structure of CB colloidal particles in a slurry. Gelled CB structures, evident in shear-thinning behaviour, are observed for all slurries, but two distinct CB gel regimes are evident: percolated and dispersed. The percolated regime occurs when the ratio of dissolved PVDF to free CB is reduced, e.g. by the incomplete dissolution of the PVDF. These samples exhibit thixotropic flow behaviour and lead to more porous cathodes. Well-dispersed CB gels exhibit reversible flow behaviour and form denser cathodes. The mass loading of cathodes increases with solution viscosity, and above a viscosity of 128 ± 46 mPa·s, the mass loading across the cathode tape becomes uniform. The first discharge capacity of battery cells increases monotonically with the viscosity of the PVDF solution, but no correlation is evident after 100 cycles. Process models that incorporate these relationships will improve the reproducibility of cathode coatings, enable higher coating weights and reduce materials losses leading to lower manufacturing costs and higher capacity batteries.
- 16 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (20) , 12381-12393
Open AccessEffect of binder viscosity on the rheology of cathode slurries and performance of lithium-ion battery half cells
Reliably benchmarking the performance of new cathode materials is an ongoing challenge in the development of high-capacity lithium-ion batteries. {Small variations in the formulation or processing of a cathode can severely affect the performance of the resulting battery cell.} Understanding and controlling interactions between the binder and other slurry components will enable faster, more rationalised battery cell optimisation. For the first time, this work systematically varies the viscosity of polyvinylidene fluoride (PVDF) binder solutions across a decade (15 to 320 mPa·s) whilst holding constant the solid loading of carbon black (CB) and cathode active material LiNi0.8Mn0.1Co0.1O2; NMC811). Steric stabilisation, rather than depletion or flocculation, is shown to be the mechanism by which PVDF modulates the structure of CB colloidal particles in a slurry. Gelled CB structures, evident in shear-thinning behaviour, are observed for all slurries, but two distinct CB gel regimes are evident: percolated and dispersed. The percolated regime occurs when the ratio of dissolved PVDF to free CB is reduced, e.g. by the incomplete dissolution of the PVDF. These samples exhibit thixotropic flow behaviour and lead to more porous cathodes. Well-dispersed CB gels exhibit reversible flow behaviour and form denser cathodes. The mass loading of cathodes increases with solution viscosity, and above a viscosity of 128 ± 46 mPa·s, the mass loading across the cathode tape becomes uniform. The first discharge capacity of battery cells increases monotonically with the viscosity of the PVDF solution, but no correlation is evident after 100 cycles. Process models that incorporate these relationships will improve the reproducibility of cathode coatings, enable higher coating weights and reduce materials losses leading to lower manufacturing costs and higher capacity batteries.
- Open Access
- 27 March 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 6 (5)
Fracture Testing of Lithium‐Ion Battery Cathode Secondary Particles in‐situ inside the Scanning Electron Microscope
Fracture of cathode secondary particles is a critical degradation mechanism in lithium‐ion batteries. The microindentation strength of LiNi0.8Mn0.1Co0.1O2 secondary particles is measured in situ in the scanning electron microscope (SEM), enabling dynamical imaging of fracture. Crack propagation is intergranular between primary particles when induced by compressing between flat platens (analogous to calendaring), and with a cono‐spherical indenter (representing particle‐particle contact). Fracture occurs directly beneath the cono‐spherical tip and at the centre of secondary particles when compressed between flat platens. Finite element modelling of stress states provides insight into the dependence of fracture load upon cohesive strength and particle toughness. Secondary particle indentation strength decreases with increasing secondary particle size, with cycling, and with increasing state of charge. The indentation strength decrease is greatest in earlier stages of delithiation. The novel microindentation technique allows assessment of strength and toughness of different cathode morphologies, aiding prediction of optimal particle structure and processing conditions.
- 27 March 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 6 (5)
Open AccessFracture Testing of Lithium‐Ion Battery Cathode Secondary Particles in‐situ inside the Scanning Electron Microscope
Fracture of cathode secondary particles is a critical degradation mechanism in lithium‐ion batteries. The microindentation strength of LiNi0.8Mn0.1Co0.1O2 secondary particles is measured in situ in the scanning electron microscope (SEM), enabling dynamical imaging of fracture. Crack propagation is intergranular between primary particles when induced by compressing between flat platens (analogous to calendaring), and with a cono‐spherical indenter (representing particle‐particle contact). Fracture occurs directly beneath the cono‐spherical tip and at the centre of secondary particles when compressed between flat platens. Finite element modelling of stress states provides insight into the dependence of fracture load upon cohesive strength and particle toughness. Secondary particle indentation strength decreases with increasing secondary particle size, with cycling, and with increasing state of charge. The indentation strength decrease is greatest in earlier stages of delithiation. The novel microindentation technique allows assessment of strength and toughness of different cathode morphologies, aiding prediction of optimal particle structure and processing conditions.
- Open Access
- 13 March 2023
- Published by American Physical Society (APS) in PRX Energy
- Vol. 2 (1) , 013005
Oxygen-Redox Activity in Non-Lithium-Excess Tungsten-Doped CathodeThe desire to increase the energy density of stoichiometric layered TM (TM = 3d transition metal) cathode materials has promoted investigation into their properties at high states of charge. Although there is increasing evidence for pronounced oxygen participation in the charge compensation mechanism, questions remain whether this is true -redox, as observed in -excess cathodes. Through a high-resolution K-edge resonant inelastic x-ray spectroscopy (RIXS) study of the -free -rich layered oxide , we demonstrate that the same oxidized oxygen environment exists in both -excess and non--excess systems. The observation of identical RIXS loss features in both classes of compounds is remarkable given the differences in their crystallographic structure and delithiation pathways. This lack of a specific structural motif reveals the importance of electron correlation in the charge compensation mechanism for these systems and indicates how a better description of charge compensation in layered oxides is required to understand anionic redox for energy storage.- 13 March 2023
- Published by American Physical Society (APS) in PRX Energy
- Vol. 2 (1) , 013005
Open AccessOxygen-Redox Activity in Non-Lithium-Excess Tungsten-Doped CathodeThe desire to increase the energy density of stoichiometric layered TM (TM = 3d transition metal) cathode materials has promoted investigation into their properties at high states of charge. Although there is increasing evidence for pronounced oxygen participation in the charge compensation mechanism, questions remain whether this is true -redox, as observed in -excess cathodes. Through a high-resolution K-edge resonant inelastic x-ray spectroscopy (RIXS) study of the -free -rich layered oxide , we demonstrate that the same oxidized oxygen environment exists in both -excess and non--excess systems. The observation of identical RIXS loss features in both classes of compounds is remarkable given the differences in their crystallographic structure and delithiation pathways. This lack of a specific structural motif reveals the importance of electron correlation in the charge compensation mechanism for these systems and indicates how a better description of charge compensation in layered oxides is required to understand anionic redox for energy storage. - Open Access
- 12 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Oxygen-redox activity in non-Li-excess W-doped LiNiO2 cathode
The desire to increase the energy density of stoichiometric layered LiTMO2 (TM = 3d transition metal) cathode materials has promoted investigation into their properties at high states of charge. Although there is increasing evidence for pronounced oxygen participation in the charge compensation mechanism, questions remain whether this is true O-redox, as observed in Li-excess cathodes. Through a high-resolution O K-edge resonant inelastic X-ray spectroscopy (RIXS) study of the Mn-free Ni-rich layered oxide, LiNi0.98W0.02O2, we demonstrate that the same oxidized oxygen environment exists in both Li-excess and non-Li-excess systems. The observation of identical RIXS loss features in both classes of compounds is remarkable given the differences in their crystallographic structure and delithiation pathways. This lack of a specific structural motif reveals the importance of electron correlation in the charge compensation mechanism for these systems and indicates how a better description of charge compensation in layered oxides is required to understand anionic redox for energy storage.
- 12 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOxygen-redox activity in non-Li-excess W-doped LiNiO2 cathode
The desire to increase the energy density of stoichiometric layered LiTMO2 (TM = 3d transition metal) cathode materials has promoted investigation into their properties at high states of charge. Although there is increasing evidence for pronounced oxygen participation in the charge compensation mechanism, questions remain whether this is true O-redox, as observed in Li-excess cathodes. Through a high-resolution O K-edge resonant inelastic X-ray spectroscopy (RIXS) study of the Mn-free Ni-rich layered oxide, LiNi0.98W0.02O2, we demonstrate that the same oxidized oxygen environment exists in both Li-excess and non-Li-excess systems. The observation of identical RIXS loss features in both classes of compounds is remarkable given the differences in their crystallographic structure and delithiation pathways. This lack of a specific structural motif reveals the importance of electron correlation in the charge compensation mechanism for these systems and indicates how a better description of charge compensation in layered oxides is required to understand anionic redox for energy storage.
- Open Access
- 1 October 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (10) , 109201
Perspectives for next generation lithium-ion battery cathode materials
Transitioning to electrified transport requires improvements in sustainability, energy density, power density, lifetime, and approved the cost of lithium-ion batteries, with significant opportunities remaining in the development of next-generation cathodes. This presents a highly complex, multiparameter optimization challenge, where developments in cathode chemical design and discovery, theoretical and experimental understanding, structural and morphological control, synthetic approaches, and cost reduction strategies can deliver performance enhancements required in the near- and longer-term. This multifaceted challenge requires an interdisciplinary approach to solve, which has seen the establishment of numerous academic and industrial consortia around the world to focus on cathode development. One such example is the Next Generation Lithium-ion Cathode Materials project, FutureCat, established by the UK’s Faraday Institution for electrochemical energy storage research in 2019, aimed at developing our understanding of existing and newly discovered cathode chemistries. Here, we present our perspective on persistent fundamental challenges, including protective coatings and additives to extend lifetime and improve interfacial ion transport, the design of existing and the discovery of new cathode materials where cation and cation-plus-anion redox-activity can be exploited to increase energy density, the application of earth-abundant elements that could ultimately reduce costs, and the delivery of new electrode topologies resistant to fracture which can extend battery lifetime.
- 1 October 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (10) , 109201
Open AccessPerspectives for next generation lithium-ion battery cathode materials
Transitioning to electrified transport requires improvements in sustainability, energy density, power density, lifetime, and approved the cost of lithium-ion batteries, with significant opportunities remaining in the development of next-generation cathodes. This presents a highly complex, multiparameter optimization challenge, where developments in cathode chemical design and discovery, theoretical and experimental understanding, structural and morphological control, synthetic approaches, and cost reduction strategies can deliver performance enhancements required in the near- and longer-term. This multifaceted challenge requires an interdisciplinary approach to solve, which has seen the establishment of numerous academic and industrial consortia around the world to focus on cathode development. One such example is the Next Generation Lithium-ion Cathode Materials project, FutureCat, established by the UK’s Faraday Institution for electrochemical energy storage research in 2019, aimed at developing our understanding of existing and newly discovered cathode chemistries. Here, we present our perspective on persistent fundamental challenges, including protective coatings and additives to extend lifetime and improve interfacial ion transport, the design of existing and the discovery of new cathode materials where cation and cation-plus-anion redox-activity can be exploited to increase energy density, the application of earth-abundant elements that could ultimately reduce costs, and the delivery of new electrode topologies resistant to fracture which can extend battery lifetime.
- 20 April 2020
- Published by Wiley in Journal of Polymer Science
- Vol. 58 (11) , 1571-1581
2‐Methyltetrahydrofuran (2‐MeTHF) as a versatile green solvent for the synthesis of amphiphilic copolymers via ROP, FRP, and RAFT tandem polymerizations
2‐methyltetrahydrofuran (2‐MeTHF) is a readily available, inexpensive, neoteric, bio‐based solvent. It has been adopted across a wide range of chemical processes including the batch manufacture of fine chemicals, enzymatic polycondensations and ring opening polymerizations. To reduce the environmental burden related to the synthesis of pharmaceutical‐grade polymers based on lactide and caprolactone, we envisaged the use of 2‐MeTHF. For the first time, we combined a series of metal‐free and enzymatic ROPs with free radical and controlled RAFT polymerizations (carried out separately and in tandem) in 2‐MeTHF, in order to easily tune the chemistry and the architecture of the final polymers. After a simple purification, the amphiphilic polymers were formulated into nanoparticles and tested for their cytocompatibility in three model cell lines, to assess their application as potential polymeric excipients for nanomedicines.
- 20 April 2020
- Published by Wiley in Journal of Polymer Science
- Vol. 58 (11) , 1571-1581
2‐Methyltetrahydrofuran (2‐MeTHF) as a versatile green solvent for the synthesis of amphiphilic copolymers via ROP, FRP, and RAFT tandem polymerizations
2‐methyltetrahydrofuran (2‐MeTHF) is a readily available, inexpensive, neoteric, bio‐based solvent. It has been adopted across a wide range of chemical processes including the batch manufacture of fine chemicals, enzymatic polycondensations and ring opening polymerizations. To reduce the environmental burden related to the synthesis of pharmaceutical‐grade polymers based on lactide and caprolactone, we envisaged the use of 2‐MeTHF. For the first time, we combined a series of metal‐free and enzymatic ROPs with free radical and controlled RAFT polymerizations (carried out separately and in tandem) in 2‐MeTHF, in order to easily tune the chemistry and the architecture of the final polymers. After a simple purification, the amphiphilic polymers were formulated into nanoparticles and tested for their cytocompatibility in three model cell lines, to assess their application as potential polymeric excipients for nanomedicines.
- 29 January 2015
- Published by Wiley in Chemphyschem
- Vol. 16 (6) , 1231-1238
Rapid Precipitation: An Alternative to Solvent Casting for Organic Solar Cells
Rapid precipitation, immersion of a liquid formulation into a nonsolvent, is compared with drop casting for fabricating organic solar cells. Blends comprising poly-3-hexylthiophene (P3HT), phenyl-C61-butyric acid methyl ester (PCBM), and chlorobenzene were processed into bulk samples by using two distinct routes: rapid precipitation and drop casting. The resulting structure, phases, and crystallinity were analyzed by using small-angle neutron scattering, X-ray diffraction, differential scanning calorimetry, and muon spin resonance. Rapid precipitation was found to induce a finely structured phase separation between PCBM and P3HT, with 65 wt % crystallinity in the P3HT phase. In contrast, solvent casting resulted in a mixed PCBM/P3HT phase with only 43 wt % P3HT crystallinity. The structural advantages conferred by rapid precipitation were shown to persist following intense thermal treatments.
- 29 January 2015
- Published by Wiley in Chemphyschem
- Vol. 16 (6) , 1231-1238
Rapid Precipitation: An Alternative to Solvent Casting for Organic Solar Cells
Rapid precipitation, immersion of a liquid formulation into a nonsolvent, is compared with drop casting for fabricating organic solar cells. Blends comprising poly-3-hexylthiophene (P3HT), phenyl-C61-butyric acid methyl ester (PCBM), and chlorobenzene were processed into bulk samples by using two distinct routes: rapid precipitation and drop casting. The resulting structure, phases, and crystallinity were analyzed by using small-angle neutron scattering, X-ray diffraction, differential scanning calorimetry, and muon spin resonance. Rapid precipitation was found to induce a finely structured phase separation between PCBM and P3HT, with 65 wt % crystallinity in the P3HT phase. In contrast, solvent casting resulted in a mixed PCBM/P3HT phase with only 43 wt % P3HT crystallinity. The structural advantages conferred by rapid precipitation were shown to persist following intense thermal treatments.
- 1 January 2015
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 86, 209-214
Cellulose nanopapers as tight aqueous ultra-filtration membranes
- 1 January 2015
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 86, 209-214
Cellulose nanopapers as tight aqueous ultra-filtration membranes