Noboru Suzuki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Noboru Suzuki has a total of 177 co-authors. Here are the top co-authors by number of shared publications:
Masahide Sato
Department of Material and Environmental Chemistry, Graduate School of Engineering, Utsunomiya University, Yoto 7-1-2, Utsunomiya 321-8585, Japan
38 shared publicationsTakeshi Furusawa
Department of Material and Environmental Chemistry, Graduate School of Engineering, Utsunomiya University, Yoto 7-1-2, Utsunomiya 321-8585, Japan
34 shared publicationsAtsushi Endo
Department of Applied Chemistry, Faculty of Engineering, Utsunomiya University
16 shared publicationsHiroshi Utsugi
14 shared publicationsIqbal Ahmed Siddiquey
11 shared publicationsNewaz Mohammed Bahadur
10 shared publications
Latest Publications
- Open Access
- 19 November 2019
- Published by Wiley in Engineering Reports
- Vol. 1 (4)
One‐step preparation of organic‐inorganic hybrid capsules based on simultaneous gelation and silicification
Enzyme encapsulation within alginate capsules usually suffers from low encapsulation efficiency and leakage of enzyme. In this study, alginate‐aminosilane hybrid capsules with high encapsulation efficiency, good retention and high storage stability of enzyme have been prepared by a novel method, in which viscous solution containing enzyme, calcium chloride as a crosslinker, and 3‐(2‐aminoethylamino)propyltrimethoxysilane as an aminosilane was dripped into alginate solution, facilitating the formation of alginate‐aminosilane hybrid shell at alginate/droplet interface. Results showed that the hybrid capsules could encapsulate formate dehydrogenase with molecular weight of 74 kDa with encapsulation efficiency of 98% and have the ability to protect the enclosed enzyme from denaturation by chaotropic effect of calcium ion. Furthermore, the capsules were reused efficiently for 20 cycles without loss of the enzyme activity. The approach developed in this study could evolve as a generic platform of enzyme immobilization for various biotechnological applications.
- 19 November 2019
- Published by Wiley in Engineering Reports
- Vol. 1 (4)
Open AccessOne‐step preparation of organic‐inorganic hybrid capsules based on simultaneous gelation and silicification
Enzyme encapsulation within alginate capsules usually suffers from low encapsulation efficiency and leakage of enzyme. In this study, alginate‐aminosilane hybrid capsules with high encapsulation efficiency, good retention and high storage stability of enzyme have been prepared by a novel method, in which viscous solution containing enzyme, calcium chloride as a crosslinker, and 3‐(2‐aminoethylamino)propyltrimethoxysilane as an aminosilane was dripped into alginate solution, facilitating the formation of alginate‐aminosilane hybrid shell at alginate/droplet interface. Results showed that the hybrid capsules could encapsulate formate dehydrogenase with molecular weight of 74 kDa with encapsulation efficiency of 98% and have the ability to protect the enclosed enzyme from denaturation by chaotropic effect of calcium ion. Furthermore, the capsules were reused efficiently for 20 cycles without loss of the enzyme activity. The approach developed in this study could evolve as a generic platform of enzyme immobilization for various biotechnological applications.
- Open Access
- 10 September 2019
- Published by Wiley in Journal of Nanomaterials
- Vol. 2019, 1-11
Ultrasonic-Assisted Synthesis, Characterization, and Photocatalytic Application of SiO2@TiO2 Core-Shell Nanocomposite Particles
In this study, we report the synthesis of SiO2@TiO2 core-shell nanocomposite particles by ultrasound irradiation of a mixture of dispersed SiO2 nanoparticles, titanium-tetra-n-butoxide (TBOT), and ammonia in an ethanol-water solution medium. The resulting core-shell nanocomposite particles were characterized by SEM, TEM, FT-IR, XPS, XRF, zeta potential measurements, XRD, and UV-visible spectroscopy. Results showed that TiO2 nanoparticles coated on the surface of SiO2 were 6–10 nm in size and retained an anatase crystalline phase. Zeta potential measurements confirmed that the surface property of the SiO2 changed after TiO2 coating. SiO2@TiO2 core-shell particles demonstrated better decolorization of methylene blue dye compared to commercial TiO2 in aqueous solution under UV light. After treatment, the catalysts were separated with low-speed centrifugation and successfully reused four times without loss of activity. This study may provide some inspiration for the synthesis of other metal oxide-metal oxide core-shell nanocomposite materials through ultrasound irradiation.
- 10 September 2019
- Published by Wiley in Journal of Nanomaterials
- Vol. 2019, 1-11
Open AccessUltrasonic-Assisted Synthesis, Characterization, and Photocatalytic Application of SiO2@TiO2 Core-Shell Nanocomposite Particles
In this study, we report the synthesis of SiO2@TiO2 core-shell nanocomposite particles by ultrasound irradiation of a mixture of dispersed SiO2 nanoparticles, titanium-tetra-n-butoxide (TBOT), and ammonia in an ethanol-water solution medium. The resulting core-shell nanocomposite particles were characterized by SEM, TEM, FT-IR, XPS, XRF, zeta potential measurements, XRD, and UV-visible spectroscopy. Results showed that TiO2 nanoparticles coated on the surface of SiO2 were 6–10 nm in size and retained an anatase crystalline phase. Zeta potential measurements confirmed that the surface property of the SiO2 changed after TiO2 coating. SiO2@TiO2 core-shell particles demonstrated better decolorization of methylene blue dye compared to commercial TiO2 in aqueous solution under UV light. After treatment, the catalysts were separated with low-speed centrifugation and successfully reused four times without loss of activity. This study may provide some inspiration for the synthesis of other metal oxide-metal oxide core-shell nanocomposite materials through ultrasound irradiation.
- 1 August 2018
- Published by Elsevier in Advanced Powder Technology
- Vol. 29 (8) , 1804-1811
A fast and facile microwave irradiation method for the synthesis of ZnO@ZrO2 core-shell nanocomposites and the investigation of their optical properties
- 1 August 2018
- Published by Elsevier in Advanced Powder Technology
- Vol. 29 (8) , 1804-1811
A fast and facile microwave irradiation method for the synthesis of ZnO@ZrO2 core-shell nanocomposites and the investigation of their optical properties
- 1 October 2017
- Published by Elsevier in Advanced Powder Technology
- Vol. 28 (10) , 2678-2686
Synthesis of ZnO Al2O3 core-shell nanocomposite materials by fast and facile microwave irradiation method and investigation of their optical properties
- 1 October 2017
- Published by Elsevier in Advanced Powder Technology
- Vol. 28 (10) , 2678-2686
Synthesis of ZnO Al2O3 core-shell nanocomposite materials by fast and facile microwave irradiation method and investigation of their optical properties
- 8 December 2016
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 55 (50) , 12742-12749
Preparation of Ru/ZrO2 Catalysts by NaBH4 Reduction and Their Catalytic Activity for NH3 Decomposition To Produce H2
- 8 December 2016
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 55 (50) , 12742-12749
Preparation of Ru/ZrO2 Catalysts by NaBH4 Reduction and Their Catalytic Activity for NH3 Decomposition To Produce H2
- 16 November 2016
- Published by Taylor & Francis in Journal of Microencapsulation
- Vol. 33 (8) , 743-749
Treatment of high-latency microcapsules containing an aluminium complex with an epoxy-functionalised trialkoxysilane
Some aluminium complexes are excellent catalysts of cationic polymerisation and are used for low-temperature and fast-curing adhesive, used in electronic part mounting. Microencapsulation is a suitable technique for getting high latency of the catalysts and long shelf life of the adhesives. For the higher latency in a cycloaliphatic epoxy compound, the microcapsule surface which retained small amount of aluminium complex was coated with epoxy polymer and the effect was examined. From the X-ray photoelectron spectroscopic results, the surface was recognised to be sufficiently coated and the differential scanning calorimetric analyses showed that the coating did not significantly affect the low-temperature and fast-curing properties of adhesive. After storing the mixture of cycloaliphatic epoxy compound, coated microcapsules, triphenylsilanol and silane coupling agent for 48 h at room temperature, the increase in viscosity was only 0.01 Pa s, resulting in the excellent shelf life.
- 16 November 2016
- Published by Taylor & Francis in Journal of Microencapsulation
- Vol. 33 (8) , 743-749
Treatment of high-latency microcapsules containing an aluminium complex with an epoxy-functionalised trialkoxysilane
Some aluminium complexes are excellent catalysts of cationic polymerisation and are used for low-temperature and fast-curing adhesive, used in electronic part mounting. Microencapsulation is a suitable technique for getting high latency of the catalysts and long shelf life of the adhesives. For the higher latency in a cycloaliphatic epoxy compound, the microcapsule surface which retained small amount of aluminium complex was coated with epoxy polymer and the effect was examined. From the X-ray photoelectron spectroscopic results, the surface was recognised to be sufficiently coated and the differential scanning calorimetric analyses showed that the coating did not significantly affect the low-temperature and fast-curing properties of adhesive. After storing the mixture of cycloaliphatic epoxy compound, coated microcapsules, triphenylsilanol and silane coupling agent for 48 h at room temperature, the increase in viscosity was only 0.01 Pa s, resulting in the excellent shelf life.
- 1 July 2016
- Published by Elsevier in International Journal of Adhesion and Adhesives
- Vol. 68, 333-340
A low-temperature fast curing latent catalyst microencapsulated in a porous resin structure
- 1 July 2016
- Published by Elsevier in International Journal of Adhesion and Adhesives
- Vol. 68, 333-340
A low-temperature fast curing latent catalyst microencapsulated in a porous resin structure
- 1 March 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 288, 473-481
CaO-loaded alginate capsule modified with silane coupling agents for transesterification of rapeseed oil with methanol
- 1 March 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 288, 473-481
CaO-loaded alginate capsule modified with silane coupling agents for transesterification of rapeseed oil with methanol
- 1 December 2015
- Published by Elsevier in Fuel Processing Technology
- Vol. 140, 125-131
Methanolysis of rapeseed oil to fatty acid methyl esters using microencapsulated CaO and TiO2-supported chromium oxide under light irradiation
- 1 December 2015
- Published by Elsevier in Fuel Processing Technology
- Vol. 140, 125-131
Methanolysis of rapeseed oil to fatty acid methyl esters using microencapsulated CaO and TiO2-supported chromium oxide under light irradiation