Serkan Demirel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Serkan Demirel has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Serdar Altin
Physics Department, Inonu University, Malatya, Turkiye
22 shared publications E. Altin
9 shared publicationsA. Bayri
8 shared publicationsE. Oz
8 shared publicationsAli Bayri
7 shared publications- Erdinc Oz
Atatürk Universitesi
5 shared publications
Latest Publications
- Open Access
- 10 February 2026
- Published by Academician Publishing
Moleküler Spektroskopinin Temel Prensipleri ve Uygulamaları
- 10 February 2026
- Published by Academician Publishing
Open AccessMoleküler Spektroskopinin Temel Prensipleri ve Uygulamaları
- 10 February 2026
- Published by Academician Publishing
- p. 101-156
Spektroskopik Verilerin Analizi ve Yorumlanması
Bu bölüm, spektroskopik verilerin ham halinden güvenilir bilgiye dönüştürülmesinde izlenen temel veri işleme ve analiz etme yöntemlerini sistematik olarak sunmaktadır. İlk olarak, spektral verilerin doğası (absorbans, emisyon, Raman vb.) ve bu verilerin dalga boyu-yoğunluk çiftleri şeklindeki yapısı açıklanmakta; ortalama, standart sapma, tekrarlanabilirlik ve dağılımlar gibi temel istatistiksel kavramlarla verinin güvenilirliğinin nasıl değerlendirileceği anlatılmaktadır. Ardından, veri ön işleme adımlarına odaklanılmaktadır. Elektronik ve optik kaynaklı gürültülerin tanımlanması, bu gürültünün giderilmesi için çeşitli yöntemler ile örneğin Savitzky-Golay filtresi ile düzgünleştirme ve çeşitli normalizasyon teknikleri detaylandırılmaktadır. Spektral çözünürlük ve sinyal-gürültü oranı (S/G) kavramları, bu performans metriklerinin nasıl ölçüleceği ve ortalama alma gibi yöntemlerle nasıl iyileştirilebileceği ile birlikte ele alınmaktadır. Bölümün ikinci yarısı, verilerin yorumlanmasına ayrılmıştır. Binlerce değişken (dalga boyu) içeren spektrumları analiz etmek için temel çok değişkenli tekniklere (PCA, PLS) giriş yapılmakta ve korelasyon analizi ile model doğrulama yöntemleri tanıtılmaktadır. Spektral kütüphaneler (HITRAN, RRUFF vb.) ve bunlarla basit eşleştirme/korelasyon teknikleri kullanılarak kimyasal tanımlamanın nasıl yapılacağı açıklanmaktadır. Son olarak, tüm bu süreç, gıda numunelerinde IR spektroskopisi ile kalite analizi yapan adım adım bir uygulamalı örnekle pekiştirilmektedir. Bu bölümün tamamı, okuyucunun bir spektroskopik veri setinin istatistiksel temellerini kavramasını, kalitesini değerlendirmesini, temel ön işleme ve çok değişkenli analiz tekniklerini uygulayabilmesini ve nihayetinde basit kimyasal tanımlama veya yorumlama yapabilmesi için gerekli bilgi altyapısını sunmayı hedeflemektedir.
- 10 February 2026
- Published by Academician Publishing
- p. 101-156
Spektroskopik Verilerin Analizi ve Yorumlanması
Bu bölüm, spektroskopik verilerin ham halinden güvenilir bilgiye dönüştürülmesinde izlenen temel veri işleme ve analiz etme yöntemlerini sistematik olarak sunmaktadır. İlk olarak, spektral verilerin doğası (absorbans, emisyon, Raman vb.) ve bu verilerin dalga boyu-yoğunluk çiftleri şeklindeki yapısı açıklanmakta; ortalama, standart sapma, tekrarlanabilirlik ve dağılımlar gibi temel istatistiksel kavramlarla verinin güvenilirliğinin nasıl değerlendirileceği anlatılmaktadır. Ardından, veri ön işleme adımlarına odaklanılmaktadır. Elektronik ve optik kaynaklı gürültülerin tanımlanması, bu gürültünün giderilmesi için çeşitli yöntemler ile örneğin Savitzky-Golay filtresi ile düzgünleştirme ve çeşitli normalizasyon teknikleri detaylandırılmaktadır. Spektral çözünürlük ve sinyal-gürültü oranı (S/G) kavramları, bu performans metriklerinin nasıl ölçüleceği ve ortalama alma gibi yöntemlerle nasıl iyileştirilebileceği ile birlikte ele alınmaktadır. Bölümün ikinci yarısı, verilerin yorumlanmasına ayrılmıştır. Binlerce değişken (dalga boyu) içeren spektrumları analiz etmek için temel çok değişkenli tekniklere (PCA, PLS) giriş yapılmakta ve korelasyon analizi ile model doğrulama yöntemleri tanıtılmaktadır. Spektral kütüphaneler (HITRAN, RRUFF vb.) ve bunlarla basit eşleştirme/korelasyon teknikleri kullanılarak kimyasal tanımlamanın nasıl yapılacağı açıklanmaktadır. Son olarak, tüm bu süreç, gıda numunelerinde IR spektroskopisi ile kalite analizi yapan adım adım bir uygulamalı örnekle pekiştirilmektedir. Bu bölümün tamamı, okuyucunun bir spektroskopik veri setinin istatistiksel temellerini kavramasını, kalitesini değerlendirmesini, temel ön işleme ve çok değişkenli analiz tekniklerini uygulayabilmesini ve nihayetinde basit kimyasal tanımlama veya yorumlama yapabilmesi için gerekli bilgi altyapısını sunmayı hedeflemektedir.
- 2 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (34) , 2209
Green-synthesized PVA/Borax/MnO2-based flexible and self-healable all-in-one solid-state capacitor
- 2 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (34) , 2209
Green-synthesized PVA/Borax/MnO2-based flexible and self-healable all-in-one solid-state capacitor
- 15 October 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (4)
Eco‐Friendly Flexible PVA / AC /Borax‐Based All‐In‐One Solid‐State Capacitor With Self‐Healing Capability
This study introduces an all‐in‐one solid‐state capacitor (SSC) fabricated via green synthesis, integrating polyvinyl alcohol (PVA), borax, and activated carbon (AC) to form a flexible, self‐healing system. The All‐in‐One (AiO) design combines electrodes and electrolytes into a PVA/AC/borax composite matrix, eliminating liquid electrolytes and traditional separators, enhancing safety and flexibility. The SSC exhibited remarkable electrochemical performance, and cyclic voltammetry (CV) analysis demonstrated electric double‐layer capacitors (EDLCs) behavior. The CCD tests at 10 mV s −1 showed a maximum discharge capacitance of ~74 mF g −1 after 1000 cycles, with capacity retention exceeding 95% and coulombic efficiency above 98%. The calculated energy and power density at 10 mV s −1 were approximately 0.03 and 0.63 mW g −1 , respectively, reflecting the system's suitability for low‐power applications despite the trade‐off in capacitance due to the solid‐state design. FTIR and UV–Vis spectroscopy confirmed AC integration into the structure. The SSCs' flexibility and self‐healing, enabled by reversible diol‐borate bonds, allow them to repair damage within minutes upon rehydration. EIS revealed a high charge transfer resistance (300–400 kΩ), indicating limited ion mobility at higher scan rates. These findings indicate that the PVA/AC/borax SSC is promising for sustainable energy storage in low‐rate applications, with potential for high‐rate performance optimization.
- 15 October 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (4)
Eco‐Friendly Flexible PVA / AC /Borax‐Based All‐In‐One Solid‐State Capacitor With Self‐Healing Capability
This study introduces an all‐in‐one solid‐state capacitor (SSC) fabricated via green synthesis, integrating polyvinyl alcohol (PVA), borax, and activated carbon (AC) to form a flexible, self‐healing system. The All‐in‐One (AiO) design combines electrodes and electrolytes into a PVA/AC/borax composite matrix, eliminating liquid electrolytes and traditional separators, enhancing safety and flexibility. The SSC exhibited remarkable electrochemical performance, and cyclic voltammetry (CV) analysis demonstrated electric double‐layer capacitors (EDLCs) behavior. The CCD tests at 10 mV s −1 showed a maximum discharge capacitance of ~74 mF g −1 after 1000 cycles, with capacity retention exceeding 95% and coulombic efficiency above 98%. The calculated energy and power density at 10 mV s −1 were approximately 0.03 and 0.63 mW g −1 , respectively, reflecting the system's suitability for low‐power applications despite the trade‐off in capacitance due to the solid‐state design. FTIR and UV–Vis spectroscopy confirmed AC integration into the structure. The SSCs' flexibility and self‐healing, enabled by reversible diol‐borate bonds, allow them to repair damage within minutes upon rehydration. EIS revealed a high charge transfer resistance (300–400 kΩ), indicating limited ion mobility at higher scan rates. These findings indicate that the PVA/AC/borax SSC is promising for sustainable energy storage in low‐rate applications, with potential for high‐rate performance optimization.
- Open Access
- 13 August 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (43)
Self‐healable Mn‐doped PVA‐borax hydrogel electrodes for supercapacitor applications
This study aims to investigate the effect of Mn doping on the performance of polyvinyl alcohol/borax‐structured (PMB) supercapacitor electrodes for high‐capacity, flexible, and self‐healing supercapacitor electrodes. The PMB electrodes were characterized by x‐ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy (SEM). Electrochemical characterization was conducted using cyclic voltammetry (CV), which revealed that redox reactions, which are evident at low scan rates, enhance capacitive performance. However, high scan rates introduce limitations owing to the increased vibrations of the PVA chains and incomplete electrolyte polarization. The PMB electrodes exhibited remarkable electrochemical properties and capacitive performances, which were significantly affected by the MnO₂ structure. The electrodes exhibited self‐healing properties and demonstrated flexibility to stretch by up to 40%. In addition, the results indicate that the electrode capacity of the PVA/borax system increased by 2.03 times after 1000 cycles with manganese doping. The solid electrolyte interface (SEI) layer formed on the electrode surface plays a critical role in stabilizing the capacity loss during prolonged charge–discharge cycles. The study concluded that PMB supercapacitors offer higher capacitance in 0‐2 V applications compared to other PVA/borax combination hydrogels. Moreover, the incorporation of metal‐based additives, particularly manganese, enhanced the capacitive performance, and operating voltage levels.
- 13 August 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (43)
Open AccessSelf‐healable Mn‐doped PVA‐borax hydrogel electrodes for supercapacitor applications
This study aims to investigate the effect of Mn doping on the performance of polyvinyl alcohol/borax‐structured (PMB) supercapacitor electrodes for high‐capacity, flexible, and self‐healing supercapacitor electrodes. The PMB electrodes were characterized by x‐ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy (SEM). Electrochemical characterization was conducted using cyclic voltammetry (CV), which revealed that redox reactions, which are evident at low scan rates, enhance capacitive performance. However, high scan rates introduce limitations owing to the increased vibrations of the PVA chains and incomplete electrolyte polarization. The PMB electrodes exhibited remarkable electrochemical properties and capacitive performances, which were significantly affected by the MnO₂ structure. The electrodes exhibited self‐healing properties and demonstrated flexibility to stretch by up to 40%. In addition, the results indicate that the electrode capacity of the PVA/borax system increased by 2.03 times after 1000 cycles with manganese doping. The solid electrolyte interface (SEI) layer formed on the electrode surface plays a critical role in stabilizing the capacity loss during prolonged charge–discharge cycles. The study concluded that PMB supercapacitors offer higher capacitance in 0‐2 V applications compared to other PVA/borax combination hydrogels. Moreover, the incorporation of metal‐based additives, particularly manganese, enhanced the capacitive performance, and operating voltage levels.
- 1 September 2023
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (3) , 2185-2194
A New Technological Application Field for Lavender and Economic Profit Analysis for Agricultural Producers
Nowadays, the energy and agriculture sectors are united for financial efficiency, and it brought the question to minds “can be stored the electrical energy that used in agriculture with an agricultural product?”. In this study, lavender essential oil, it obtained from Lavandula angustifolia, was used as a part of energy storage system. The essential oil was produced by distillation method. To energy storage performance analysis, the simple electrochemical capacitor was formed with platin foils and lavender essential oil. The capacitor application performances showed that the lavender essential oil can energy storage up to 4 Voltages (V). A capacity of 92 milli-Farad per cm2 (mF/cm2) was obtained with Lavender essential oil in the range of 0-4 V, and this value showed that lavender essential oil can be used in capacitors, as an electrolyte material. The results when evaluated in terms of agricultural economics, 1 million capacitors with a size of 1 cm2 can be produced with 1 ton lavender crops production per decare. Moreover, with lavender capacitors, the amount of energy required for a farm of 1000 hectares can be stored with 1000 capacitors of 10 cm2. Also, the stored energy is more than the farm's annual energy consumption, saving the farm ~534 USD annually on energy costs. In the case that all farm energy is produced with renewable energy sources, the annual profit is calculated as ~23697 USD. Also, the exploring of electrochemical capacitor electrolyte property of lavender essential oil could create an alternative sales pitch for agricultural producers.
- 1 September 2023
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (3) , 2185-2194
A New Technological Application Field for Lavender and Economic Profit Analysis for Agricultural Producers
Nowadays, the energy and agriculture sectors are united for financial efficiency, and it brought the question to minds “can be stored the electrical energy that used in agriculture with an agricultural product?”. In this study, lavender essential oil, it obtained from Lavandula angustifolia, was used as a part of energy storage system. The essential oil was produced by distillation method. To energy storage performance analysis, the simple electrochemical capacitor was formed with platin foils and lavender essential oil. The capacitor application performances showed that the lavender essential oil can energy storage up to 4 Voltages (V). A capacity of 92 milli-Farad per cm2 (mF/cm2) was obtained with Lavender essential oil in the range of 0-4 V, and this value showed that lavender essential oil can be used in capacitors, as an electrolyte material. The results when evaluated in terms of agricultural economics, 1 million capacitors with a size of 1 cm2 can be produced with 1 ton lavender crops production per decare. Moreover, with lavender capacitors, the amount of energy required for a farm of 1000 hectares can be stored with 1000 capacitors of 10 cm2. Also, the stored energy is more than the farm's annual energy consumption, saving the farm ~534 USD annually on energy costs. In the case that all farm energy is produced with renewable energy sources, the annual profit is calculated as ~23697 USD. Also, the exploring of electrochemical capacitor electrolyte property of lavender essential oil could create an alternative sales pitch for agricultural producers.
- 7 January 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (1) , 1-10
Stretchable and self-healable PVA–Nickel–Borax electrodes for supercapacitor applications
- 7 January 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (1) , 1-10
Stretchable and self-healable PVA–Nickel–Borax electrodes for supercapacitor applications
- 22 May 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (12) , 16335-16345
Self-healable PVA–graphite–borax as electrode and electrolyte properties for smart and flexible supercapacitor applications
- 22 May 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (12) , 16335-16345
Self-healable PVA–graphite–borax as electrode and electrolyte properties for smart and flexible supercapacitor applications
- 15 December 2020
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 10 (4) , 2551-2558
PVA-Bloedite [Na2X(SO4)2 (X= Ni, Mg)] Jel Elektrolitlerin Kapasitör Uygulamaları
Bloedite tipi olarak adlandırılan [Na2M(SO4)2.(4H2O) (M= Mn, Zn, Ni, Cu, Fe, Co)] malzemeler teknolojik olarak sensör ve enerji depolama sistemlerinde aktif olarak kullanılabilmektedir. Bu kapsamda Na2X(SO4)2.(4H2O) (X=Mg, Ni) bloedite malzemelerinin jel forma getirilerek kapasitör elektroliti özellikleri incelenmiştir. Polivinil Alkol (PVA) ile jel forma getirilen Ni ve Mg-bloedite yapılarının cv ölçümleri yapılmış ve ±1 V bölgesi içinde kalıcı akım düzlüklerine sahip oldukları belirlenmiştir. Kapasitör yapımında paslanmaz çelik folyolar elektrot olarak kullanılmıştır ve yapılan kapasite ölçümlerinde Ni-bleodite ~28 mFg-1, Mg-bleodite ~25 mFg-1 deşarj kapasitans değerlerine ulaşmıştır. Şarj-deşarj döngüsel kapasitans değeri belirleme çalışmaları kapsamında, 50 döngü sonunda Ni-bloedite yapısının Mg-bloedite yapısına göre iki kattan daha fazla yüksek kapasitans değeri sağladığı belirlenmiştir. Bu farklılık jel elektrolit viskozitesi ile ilişkilendirilmiştir. Yapılan çalışmalar sonucunda PVA-Bloedite yapılı malzemelerin kapasitör enerji depolama sistemlerinde jel elektrolit olarak kullanılmasına uygun olduğu belirlenmiştir.
- 15 December 2020
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 10 (4) , 2551-2558
PVA-Bloedite [Na2X(SO4)2 (X= Ni, Mg)] Jel Elektrolitlerin Kapasitör Uygulamaları
Bloedite tipi olarak adlandırılan [Na2M(SO4)2.(4H2O) (M= Mn, Zn, Ni, Cu, Fe, Co)] malzemeler teknolojik olarak sensör ve enerji depolama sistemlerinde aktif olarak kullanılabilmektedir. Bu kapsamda Na2X(SO4)2.(4H2O) (X=Mg, Ni) bloedite malzemelerinin jel forma getirilerek kapasitör elektroliti özellikleri incelenmiştir. Polivinil Alkol (PVA) ile jel forma getirilen Ni ve Mg-bloedite yapılarının cv ölçümleri yapılmış ve ±1 V bölgesi içinde kalıcı akım düzlüklerine sahip oldukları belirlenmiştir. Kapasitör yapımında paslanmaz çelik folyolar elektrot olarak kullanılmıştır ve yapılan kapasite ölçümlerinde Ni-bleodite ~28 mFg-1, Mg-bleodite ~25 mFg-1 deşarj kapasitans değerlerine ulaşmıştır. Şarj-deşarj döngüsel kapasitans değeri belirleme çalışmaları kapsamında, 50 döngü sonunda Ni-bloedite yapısının Mg-bloedite yapısına göre iki kattan daha fazla yüksek kapasitans değeri sağladığı belirlenmiştir. Bu farklılık jel elektrolit viskozitesi ile ilişkilendirilmiştir. Yapılan çalışmalar sonucunda PVA-Bloedite yapılı malzemelerin kapasitör enerji depolama sistemlerinde jel elektrolit olarak kullanılmasına uygun olduğu belirlenmiştir.
- 1 December 2020
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 122
Fabrication and electrochemical properties of flexible ZnO doped PVA-Borax based solid-gel electrolytes
- 1 December 2020
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 122
Fabrication and electrochemical properties of flexible ZnO doped PVA-Borax based solid-gel electrolytes