Jorge Kennety Silva Formiga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jorge Kennety Silva Formiga has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Denilson Paulo Souza dos Santos
Faculdade de Engenharia de São João da Boa Vista, São Paulo State University (UNESP), São João da Boa Vista, Brazil
12 shared publications - Antonio Fernando Bertachini Almeida Prado
National Institute for Space Research (INPE), São José dos Campos, Brazil
6 shared publications - Rodolpho Vilhena de Moraes
Federal University of São Paulo (UNIFESP), São José dos Campos, Brazil
6 shared publications - Adriano Bressane
Graduate Program in Civil and Environmental Engineering, São Paulo State University (UNESP), Bauru 17033-360, Brazil
3 shared publications - Adriano Gonçalves dos Reis
Universidade Estadual Paulista, Brasil
3 shared publications - Anna Isabel Silva Loureiro
Graduate Program in Civil and Environmental Engineering, São Paulo State University, Bauru 17033-360, Brazil
3 shared publications
Latest Publications
- Open Access
- 27 October 2026
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 29, e5139
Evaluation of adherence to the use of teledentistry by dental surgeons in a specialty center (state of São Paulo, Brazil)
Objective: This study aimed to evaluate the knowledge, perceived security, and interest of dentists in adopting digital tools designed for teledentistry within the Ortogeo institution. Material and Methods: A cross-sectional, quantitative investigation was conducted with 205 dentists between May and December 2024. Data were collected through a structured questionnaire composed of open- and closed-ended questions. Descriptive and inferential analyses were applied to explore associations between technological adoption and variables such as prior knowledge, use of messaging applications, perceived security, and the number of advantages identified by participants. Results: The findings revealed that 64.88% of respondents were familiar with the concept of teledentistry, 72.68% used WhatsApp® as a telehealth resource, and 92.68% expressed interest in adopting a dedicated digital platform, provided it ensured regulatory compliance and data security. Statistically significant correlations were observed between interest in adopting the platform and prior knowledge, messaging app usage, perceived security, and the number of perceived benefits. Open-ended responses highlighted agility, convenience, and time savings as the main advantages, while limitations included the impossibility of clinical examination, legal uncertainties, and regulatory gaps. Conclusion: The study demonstrates that, although teledentistry is recognized as a valuable tool by most professionals, its successful implementation requires ongoing professional training, secure technological solutions, and the establishment of public policies that ensure ethical and regulated integration into clinical practice.
- 27 October 2026
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 29, e5139
Open AccessEvaluation of adherence to the use of teledentistry by dental surgeons in a specialty center (state of São Paulo, Brazil)
Objective: This study aimed to evaluate the knowledge, perceived security, and interest of dentists in adopting digital tools designed for teledentistry within the Ortogeo institution. Material and Methods: A cross-sectional, quantitative investigation was conducted with 205 dentists between May and December 2024. Data were collected through a structured questionnaire composed of open- and closed-ended questions. Descriptive and inferential analyses were applied to explore associations between technological adoption and variables such as prior knowledge, use of messaging applications, perceived security, and the number of advantages identified by participants. Results: The findings revealed that 64.88% of respondents were familiar with the concept of teledentistry, 72.68% used WhatsApp® as a telehealth resource, and 92.68% expressed interest in adopting a dedicated digital platform, provided it ensured regulatory compliance and data security. Statistically significant correlations were observed between interest in adopting the platform and prior knowledge, messaging app usage, perceived security, and the number of perceived benefits. Open-ended responses highlighted agility, convenience, and time savings as the main advantages, while limitations included the impossibility of clinical examination, legal uncertainties, and regulatory gaps. Conclusion: The study demonstrates that, although teledentistry is recognized as a valuable tool by most professionals, its successful implementation requires ongoing professional training, secure technological solutions, and the establishment of public policies that ensure ethical and regulated integration into clinical practice.
- Open Access
- 21 October 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (38) , 17618-17632
Toxicity of percolates from geotechnical applications with water treatment sludge incorporation
- 21 October 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (38) , 17618-17632
Open AccessToxicity of percolates from geotechnical applications with water treatment sludge incorporation
- Open Access
- 2 August 2026
- Published by Elsevier in Journal of Space Safety Engineering
- Vol. 13 (3) , 682-692
Altitude and directional effects on debris lifetimes in low Earth orbit
- 2 August 2026
- Published by Elsevier in Journal of Space Safety Engineering
- Vol. 13 (3) , 682-692
Open AccessAltitude and directional effects on debris lifetimes in low Earth orbit
- Open Access
- 27 June 2026
- Published by Elsevier in Journal of Theoretical Biology
- Vol. 633, 112527
A hybrid reaction-diffusion and mechanical stimulus model for mandibular bone remodeling under chewing and vibratory loading
- 27 June 2026
- Published by Elsevier in Journal of Theoretical Biology
- Vol. 633, 112527
Open AccessA hybrid reaction-diffusion and mechanical stimulus model for mandibular bone remodeling under chewing and vibratory loading
- Open Access
- 20 April 2026
- Published by Elsevier in SSRN Electronic Journal
Hybrid Dynamic-Statistical Modeling for Orbital Collision Probability
The rapid growth of artificial objects in low Earth orbit (LEO) increases the need for robust metrics for collision risk assessment. Traditionally employed methods, such as Foster's Gaussian formulations and Akella and Alfriend's analytical extension, are efficient for routine monitoring but may exhibit limitations in post-fragmentation scenarios, in which the debris cloud exhibits anisotropic dispersion and non-Gaussian behavior. In contrast, dynamic models based on patched conics, such as that of Formiga et al., physically describe the evolution of the cloud but do not directly provide an operational probabilistic measure. In this work, we propose a hybrid dynamic-statistical model that connects the physical evolution of the cloud to the probabilistic calculation of collision. The uncertainties obtained dynamically are mapped into three-dimensional covariance representations derived from the propagated fragment ensemble and projected onto the conjunction plane, allowing the Foster/Akella integral to be applied without relying on a priori Gaussian assumptions. Thus, the statistics used in the calculation of P c emerge from the physical evolution of the propagated set, improving the physical consistency and reliability of predictions in scenarios of high uncertainty. Finally, we provide a reproducible implementation in MATLAB, detailing the computational workflow and its applicability to operational Space Situational Awareness systems.
- 20 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHybrid Dynamic-Statistical Modeling for Orbital Collision Probability
The rapid growth of artificial objects in low Earth orbit (LEO) increases the need for robust metrics for collision risk assessment. Traditionally employed methods, such as Foster's Gaussian formulations and Akella and Alfriend's analytical extension, are efficient for routine monitoring but may exhibit limitations in post-fragmentation scenarios, in which the debris cloud exhibits anisotropic dispersion and non-Gaussian behavior. In contrast, dynamic models based on patched conics, such as that of Formiga et al., physically describe the evolution of the cloud but do not directly provide an operational probabilistic measure. In this work, we propose a hybrid dynamic-statistical model that connects the physical evolution of the cloud to the probabilistic calculation of collision. The uncertainties obtained dynamically are mapped into three-dimensional covariance representations derived from the propagated fragment ensemble and projected onto the conjunction plane, allowing the Foster/Akella integral to be applied without relying on a priori Gaussian assumptions. Thus, the statistics used in the calculation of P c emerge from the physical evolution of the propagated set, improving the physical consistency and reliability of predictions in scenarios of high uncertainty. Finally, we provide a reproducible implementation in MATLAB, detailing the computational workflow and its applicability to operational Space Situational Awareness systems.
- Open Access
- 28 November 2025
- Published by Springer Nature in Research Square
A Hybrid Reaction–Diffusion and Mechanical Stimulus Model for Mandibular Bone Remodeling under Chewing and Vibratory Loading
Bone remodeling in the mandible is governed by the interplay between local mechanical loads, cellular population dynamics, and overload-induced resorption. While mastication is the primary physiological driver of mandibular adaptation, low-magnitude vibration has emerged as a promising noninvasive adjunct to enhance peri-implant bone stability. However, the mechanistic interaction between vibration and chewing-induced stimuli remains insufficiently clarified.This study presents a hybrid mechanobiological model that integrates a reaction--diffusion formulation for osteoblast, osteoclast, and mediator fields with a density evolution law combining adaptive regulation and overload penalization. The framework incorporates accumulated stimulus dynamics, a threshold-regulated lazy zone, and frequency-dependent vibratory modulation of cellular activity. Numerical simulations were performed under controlled physiological and mechanical conditions using spatially resolved density fields and Gaussian-distributed masticatory stresses.The model reproduced the canonical biphasic response of bone adaptation, with an initial anabolic phase followed by stabilization governed by overload-driven resorption. Under chewing alone, density stabilized near 1.02--1.03g/cm3, depending on load magnitude. When vibration was superimposed, a strong frequency-dependent anabolic effect emerged: 40~Hz increased steady-state density by approximately 3.5%, whereas 120Hz produced gains near 10% (0.08--0.10g/cm3), consistent with 80--100HU changes measurable by CBCT. Spatially, mastication alone generated localized densification, while vibration broadened and homogenized the anabolic region, particularly at 120Hz. Cellular simulations revealed accelerated and synchronized reductions in osteoblast and osteoclast populations under vibration, indicating enhanced mechanotransductive efficiency rather than increased metabolic demand. The agreement between simulated density gains, spatial adaptation patterns, and experimental observations demonstrates that the proposed hybrid model captures key mechanobiological features of mandibular adaptation. The framework offers a rigorous and computationally efficient tool for predicting peri-implant bone remodeling under combined masticatory and vibratory stimuli, supporting the development of patient-specific vibration-based therapeutic strategies in oral and maxillofacial biomechanics.
- 28 November 2025
- Published by Springer Nature in Research Square
Open AccessA Hybrid Reaction–Diffusion and Mechanical Stimulus Model for Mandibular Bone Remodeling under Chewing and Vibratory Loading
Bone remodeling in the mandible is governed by the interplay between local mechanical loads, cellular population dynamics, and overload-induced resorption. While mastication is the primary physiological driver of mandibular adaptation, low-magnitude vibration has emerged as a promising noninvasive adjunct to enhance peri-implant bone stability. However, the mechanistic interaction between vibration and chewing-induced stimuli remains insufficiently clarified.This study presents a hybrid mechanobiological model that integrates a reaction--diffusion formulation for osteoblast, osteoclast, and mediator fields with a density evolution law combining adaptive regulation and overload penalization. The framework incorporates accumulated stimulus dynamics, a threshold-regulated lazy zone, and frequency-dependent vibratory modulation of cellular activity. Numerical simulations were performed under controlled physiological and mechanical conditions using spatially resolved density fields and Gaussian-distributed masticatory stresses.The model reproduced the canonical biphasic response of bone adaptation, with an initial anabolic phase followed by stabilization governed by overload-driven resorption. Under chewing alone, density stabilized near 1.02--1.03g/cm3, depending on load magnitude. When vibration was superimposed, a strong frequency-dependent anabolic effect emerged: 40~Hz increased steady-state density by approximately 3.5%, whereas 120Hz produced gains near 10% (0.08--0.10g/cm3), consistent with 80--100HU changes measurable by CBCT. Spatially, mastication alone generated localized densification, while vibration broadened and homogenized the anabolic region, particularly at 120Hz. Cellular simulations revealed accelerated and synchronized reductions in osteoblast and osteoclast populations under vibration, indicating enhanced mechanotransductive efficiency rather than increased metabolic demand. The agreement between simulated density gains, spatial adaptation patterns, and experimental observations demonstrates that the proposed hybrid model captures key mechanobiological features of mandibular adaptation. The framework offers a rigorous and computationally efficient tool for predicting peri-implant bone remodeling under combined masticatory and vibratory stimuli, supporting the development of patient-specific vibration-based therapeutic strategies in oral and maxillofacial biomechanics.
- 23 September 2025
- Published by Elsevier in Journal of Space Safety Engineering
- Vol. 12 (4) , 694-704
Resonance influence on orbital dynamics of space debris in LEO
- 23 September 2025
- Published by Elsevier in Journal of Space Safety Engineering
- Vol. 12 (4) , 694-704
Resonance influence on orbital dynamics of space debris in LEO
- Open Access
- 3 June 2025
- Published by MDPI AG in Limnological Review
- Vol. 25 (2) , 25
Challenges in Phosphorus Removal from Eutrophic Waters Using Adsorption: A Laboratory Comparison of Commercial and Moringa-Derived Adsorbents
To reduce the concentration of phosphorus, the main nutrient responsible for eutrophication, two adsorbents were tested: a commercial activated carbon and one produced from the pods of Moringa oleifera. A concentrated phosphorus solution representative of eutrophic ecosystems was produced at 0.210 mg·L−1 and used as the adsorbate. Thirty-nine laboratory samples were prepared with adsorbent dosages ranging from 0.5 g∙L−1 to 2.0 g∙L−1, and statistical analyses were applied to evaluate the results. An increase in the concentration of phosphorus in the solution was detected in all the tests. Desorption occurred due to the presence of nutrients in the composition of the adsorbents, in addition to the mild physical activation and the use of H3PO4 as a chemical activator of the natural adsorbent, which further favored desorption at equilibrium, even for activated carbon. This work, therefore, highlights the limitations of using the adsorption technique to remove phosphorus from eutrophic aquatic ecosystems. It is recommended that other activation methods for M. oleifera pods be studied for phosphorus removal from water, as well as adsorption equilibrium, kinetics, and thermodynamic studies.
- 3 June 2025
- Published by MDPI AG in Limnological Review
- Vol. 25 (2) , 25
Open AccessChallenges in Phosphorus Removal from Eutrophic Waters Using Adsorption: A Laboratory Comparison of Commercial and Moringa-Derived Adsorbents
To reduce the concentration of phosphorus, the main nutrient responsible for eutrophication, two adsorbents were tested: a commercial activated carbon and one produced from the pods of Moringa oleifera. A concentrated phosphorus solution representative of eutrophic ecosystems was produced at 0.210 mg·L−1 and used as the adsorbate. Thirty-nine laboratory samples were prepared with adsorbent dosages ranging from 0.5 g∙L−1 to 2.0 g∙L−1, and statistical analyses were applied to evaluate the results. An increase in the concentration of phosphorus in the solution was detected in all the tests. Desorption occurred due to the presence of nutrients in the composition of the adsorbents, in addition to the mild physical activation and the use of H3PO4 as a chemical activator of the natural adsorbent, which further favored desorption at equilibrium, even for activated carbon. This work, therefore, highlights the limitations of using the adsorption technique to remove phosphorus from eutrophic aquatic ecosystems. It is recommended that other activation methods for M. oleifera pods be studied for phosphorus removal from water, as well as adsorption equilibrium, kinetics, and thermodynamic studies.
- Open Access
- 20 January 2025
- Published by Brazilian Society for Computational and Applied Mathematics (SBMAC) in Proceeding Series of the Brazilian Society of Computational and Applied Mathematics
- Vol. 11 (1) , 1-6
Parametric Linear Stability Analysis of Tethered System Dynamics in Keplerian Orbits
The objective of this study is to analyze the dynamics of a tether system comprised of two point masses interconnected by a cable (Space Tethers), orbiting a Newtonian center of attraction in a Keplerian orbit without external forces. Through reductions in the equations of motion, a Hamiltonian function is derived, and four stationary solutions are identified, two of which are stable. The study delves into the parametric linear stability concerning the eccentricity parameter (e) of the elliptical orbit and another parameter denoted as α, representing the angle between the tether’s projection and the orbit plane. By employing the Deprit-Hori method alongside numerical computations, the study maps stability and instability regions in the parameter plane α× e.
- 20 January 2025
- Published by Brazilian Society for Computational and Applied Mathematics (SBMAC) in Proceeding Series of the Brazilian Society of Computational and Applied Mathematics
- Vol. 11 (1) , 1-6
Open AccessParametric Linear Stability Analysis of Tethered System Dynamics in Keplerian Orbits
The objective of this study is to analyze the dynamics of a tether system comprised of two point masses interconnected by a cable (Space Tethers), orbiting a Newtonian center of attraction in a Keplerian orbit without external forces. Through reductions in the equations of motion, a Hamiltonian function is derived, and four stationary solutions are identified, two of which are stable. The study delves into the parametric linear stability concerning the eccentricity parameter (e) of the elliptical orbit and another parameter denoted as α, representing the angle between the tether’s projection and the orbit plane. By employing the Deprit-Hori method alongside numerical computations, the study maps stability and instability regions in the parameter plane α× e.
- Open Access
- 1 January 2025
- Published by Even3
- Vol. 2, 1
MAPEAMENTO E ANÁLISE DAS ROTAÇÕES DE DETRITOS ESPACIAIS APÓS A FRAGMENTAÇÃO E RISCO DE COLISÃO
Science & Business Connection: Anais do Congresso Científico Tecnológico (978-65-272-1985-9) - Mapeamento E Análise Das Rotações De Detritos Espaciais Após A Fragmentação E Risco De Colisão
- 1 January 2025
- Published by Even3
- Vol. 2, 1
Open AccessMAPEAMENTO E ANÁLISE DAS ROTAÇÕES DE DETRITOS ESPACIAIS APÓS A FRAGMENTAÇÃO E RISCO DE COLISÃO
Science & Business Connection: Anais do Congresso Científico Tecnológico (978-65-272-1985-9) - Mapeamento E Análise Das Rotações De Detritos Espaciais Após A Fragmentação E Risco De Colisão