Ali Alnedawi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ali Alnedawi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Riyadh Al-Ameri
School of Engineering, Deakin University, Geelong 3216, Australia
6 shared publications Kali Prasad Nepal
5 shared publications- Reuben Tamakloe
Korea Advanced Institute of Science and Technology 193, Daejeon, South Korea
2 shared publications Bidur Kafle
School of Engineering, Deakin University, Waurn Ponds, Australia
1 shared publicationGhufraan Mohammed Aboud
1 shared publicationHamsa Zuabidi
1 shared publication
Latest Publications
- Open Access
- 20 April 2022
- Published by Elsevier in International Journal of Transportation Science and Technology
- Vol. 12 (2) , 460-475
Factors associated with driver injury severity of motor vehicle crashes on sealed and unsealed pavements: Random parameter model with heterogeneity in means and variances
- 20 April 2022
- Published by Elsevier in International Journal of Transportation Science and Technology
- Vol. 12 (2) , 460-475
Open AccessFactors associated with driver injury severity of motor vehicle crashes on sealed and unsealed pavements: Random parameter model with heterogeneity in means and variances
- 1 September 2021
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 160, 106306
Fatal pedestrian crashes at intersections: Trend mining using association rules
- 1 September 2021
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 160, 106306
Fatal pedestrian crashes at intersections: Trend mining using association rules
- 1 March 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part B: Pavements
- Vol. 147 (1) , 04020076
Recycled Concrete Aggregate as Alternative Pavement Materials: Experimental and Parametric Study
Recycled concrete aggregate (RCA) is one of the alternatives to virgin material that has engendered interest in recent years, especially as an alternative aggregate. There are limited available studies assessing the suitability of RCA as a base or subbase material in pavements. Therefore, the present research describes different laboratory experiments to determine the possibility of using RCA as alternative subbase material for road pavement in order to conserve natural resources and reduce geoenvironmental effects. Modified compaction tests, particle-size distribution, Los Angeles abrasion, Atterberg limits, specific gravity, California bearing ratio, and repeated load triaxial tests were carried out for that purpose. RCA was also reinforced with both biaxial and triaxial geogrids for material optimization. Shakedown analysis and parametric investigation using some constitutive models were conducted for further assessment. The physical and geotechnical properties showed that RCA is strong enough and fulfills the local road authority requirements to be used as a subbase material. The resilient modulus values of the reinforced RCA with geogrid was higher than the unreinforced RCA; in addition, the permanent deformation properties of reinforced RCA with geogrid was found to be smaller than that of the unreinforced RCA. The shakedown ranges varied from A to B, which indicates that RCA can be used as pavement subbase material when it is compacted with moisture content less than the optimum. The parametric investigation showed that some constitutive models are capable for assessing the behavior of both reinforced and unreinforced materials.
- 1 March 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part B: Pavements
- Vol. 147 (1) , 04020076
Recycled Concrete Aggregate as Alternative Pavement Materials: Experimental and Parametric Study
Recycled concrete aggregate (RCA) is one of the alternatives to virgin material that has engendered interest in recent years, especially as an alternative aggregate. There are limited available studies assessing the suitability of RCA as a base or subbase material in pavements. Therefore, the present research describes different laboratory experiments to determine the possibility of using RCA as alternative subbase material for road pavement in order to conserve natural resources and reduce geoenvironmental effects. Modified compaction tests, particle-size distribution, Los Angeles abrasion, Atterberg limits, specific gravity, California bearing ratio, and repeated load triaxial tests were carried out for that purpose. RCA was also reinforced with both biaxial and triaxial geogrids for material optimization. Shakedown analysis and parametric investigation using some constitutive models were conducted for further assessment. The physical and geotechnical properties showed that RCA is strong enough and fulfills the local road authority requirements to be used as a subbase material. The resilient modulus values of the reinforced RCA with geogrid was higher than the unreinforced RCA; in addition, the permanent deformation properties of reinforced RCA with geogrid was found to be smaller than that of the unreinforced RCA. The shakedown ranges varied from A to B, which indicates that RCA can be used as pavement subbase material when it is compacted with moisture content less than the optimum. The parametric investigation showed that some constitutive models are capable for assessing the behavior of both reinforced and unreinforced materials.
- 3 February 2021
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (9) , 2998-3010
Investigation of non-standard unbound granular materials under cyclic loads: experimental and regression analyses
This study evaluated the potential use of non-standard unbound granular material (UGM) as pavement granular materials. Repeated load triaxial (RLT) tests were performed on several non-standard UGM samples to evaluate the performance as base course material for low volume traffic pavements. The laboratory test results showed that non-standard UGM samples performed better or comparable to the performance of conventional base course material in terms of permanent deformation (PD) and resilient modulus (MR). Based on these results, it would be viable to consider non-standard UGM as base course material to reduce the utilisation of conventional material and promote sustainability. In the second phase of the study, regression models for PD and MR from the literature have been evaluated to fit the laboratory test response of the non-standard UGMs. The results of the regression analyses indicated that including the bulk stresses as a prediction factor in the new developed constitutive models improved the prediction accuracy with R2 between 0.90 and 0.99. Furthermore, MEPDG model was able to successfully predict MR observed from laboratory results. Based on the results of MR regression analyses, it would be fair to state that MEPDG model can be successfully implemented in Australian pavement design method.
- 3 February 2021
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (9) , 2998-3010
Investigation of non-standard unbound granular materials under cyclic loads: experimental and regression analyses
This study evaluated the potential use of non-standard unbound granular material (UGM) as pavement granular materials. Repeated load triaxial (RLT) tests were performed on several non-standard UGM samples to evaluate the performance as base course material for low volume traffic pavements. The laboratory test results showed that non-standard UGM samples performed better or comparable to the performance of conventional base course material in terms of permanent deformation (PD) and resilient modulus (MR). Based on these results, it would be viable to consider non-standard UGM as base course material to reduce the utilisation of conventional material and promote sustainability. In the second phase of the study, regression models for PD and MR from the literature have been evaluated to fit the laboratory test response of the non-standard UGMs. The results of the regression analyses indicated that including the bulk stresses as a prediction factor in the new developed constitutive models improved the prediction accuracy with R2 between 0.90 and 0.99. Furthermore, MEPDG model was able to successfully predict MR observed from laboratory results. Based on the results of MR regression analyses, it would be fair to state that MEPDG model can be successfully implemented in Australian pavement design method.
- Open Access
- 1 December 2019
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 11 (6) , 1231-1242
Neural network-based model for prediction of permanent deformation of unbound granular materials
- 1 December 2019
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 11 (6) , 1231-1242
Open AccessNeural network-based model for prediction of permanent deformation of unbound granular materials
- 27 August 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (8) , 1008-1016
Effect of loading frequencies on permanent deformation of unbound granular materials
Unbound granular materials (UGMs) show both permanent and resilient deformations under repeated traffic loads. Permanent deformation (PD) is the irreversible part of the deformation, commonly used for rutting prediction. Several factors, both stress and material related, are found to have influences on PD but some of these factors have not been thoroughly investigated. For example, there is no consensus in existing pavement design standards, guides and literature about the effect of loading frequencies and consequently, they have suggested different frequencies for testing. In order to address this disparity, this study investigates the influence of loading frequencies on PD of UGMs. Three frequencies (0.2, 0.33, and 0.5 Hz) were applied on two types of crushed rocks (basalt and granite) using the repeated load triaxial test (RLTT). The experimental results show that there is negligible effect of these loading frequencies for the tested materials under specified testing conditions. This result has an important implication in that by increasing loading frequency, RLTT testing duration could be drastically reduced. The experimental data were further modelled using regression and artificial neural network (ANN) modelling. The sensitivity analysis from the ANN modelling showed that the loading frequency has only 3% importance on the PD of the tested UGMs among the other factors.
- 27 August 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (8) , 1008-1016
Effect of loading frequencies on permanent deformation of unbound granular materials
Unbound granular materials (UGMs) show both permanent and resilient deformations under repeated traffic loads. Permanent deformation (PD) is the irreversible part of the deformation, commonly used for rutting prediction. Several factors, both stress and material related, are found to have influences on PD but some of these factors have not been thoroughly investigated. For example, there is no consensus in existing pavement design standards, guides and literature about the effect of loading frequencies and consequently, they have suggested different frequencies for testing. In order to address this disparity, this study investigates the influence of loading frequencies on PD of UGMs. Three frequencies (0.2, 0.33, and 0.5 Hz) were applied on two types of crushed rocks (basalt and granite) using the repeated load triaxial test (RLTT). The experimental results show that there is negligible effect of these loading frequencies for the tested materials under specified testing conditions. This result has an important implication in that by increasing loading frequency, RLTT testing duration could be drastically reduced. The experimental data were further modelled using regression and artificial neural network (ANN) modelling. The sensitivity analysis from the ANN modelling showed that the loading frequency has only 3% importance on the PD of the tested UGMs among the other factors.
- Open Access
- 2 April 2019
- Published by Springer Nature in Journal of Modern Transportation
- Vol. 27 (2) , 108-119
New shakedown criterion and permanent deformation properties of unbound granular materials
- 2 April 2019
- Published by Springer Nature in Journal of Modern Transportation
- Vol. 27 (2) , 108-119
Open AccessNew shakedown criterion and permanent deformation properties of unbound granular materials
- 8 February 2019
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 6 (2) , 70-88
The Effect of Cyclic Load Characteristics on Unbound Granular Materials
- 8 February 2019
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 6 (2) , 70-88
The Effect of Cyclic Load Characteristics on Unbound Granular Materials
- Open Access
- 1 February 2019
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 11 (1) , 172-180
Effect of vertical stress rest period on deformation behaviour of unbound granular materials: Experimental and numerical investigations
- 1 February 2019
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 11 (1) , 172-180
Open AccessEffect of vertical stress rest period on deformation behaviour of unbound granular materials: Experimental and numerical investigations
- 17 December 2018
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 6 (1) , 39-55
Permanent Deformation Prediction Model of Unbound Granular Materials for Flexible Pavement Design
- 17 December 2018
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 6 (1) , 39-55
Permanent Deformation Prediction Model of Unbound Granular Materials for Flexible Pavement Design