JKJuha Kiviluoma

Juha Kiviluoma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juha Kiviluoma has a total of 192 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    TulipaEnergyModel.jl: A Modelling Framework Breaking the Tradeoff Between Fidelity and Computational Load

    by Abel Soares Siqueira, Diego A. Tejada-Arango, Grigory Neustroev, Juha Kiviluoma, Lauren Clisby, Maaike Elgersma, Ni Wang, Suvayu Ali, Zhi Gao, Mathijs M. de Weerdt, et al.

  • Open Access

    Tight MIP Formulations for Optimal Operation and Investment of Storage Including Reserves

    by Maaike B. Elgersma, Germán Morales-España, Karen I. Aardal, Niina Helistö, Juha Kiviluoma, Mathijs M. de Weerdt


  • Open Access

    Energy system impacts of globally versus locally optimised residential heating and cooling demand response in Finland across multiple weather years — A North European case study

    by Eric Harrison, Topi Rasku, Juha Kiviluoma, Niina Helistö

    Widespread residential demand response (DR) could potentially help alleviate the growing pressure on power grids caused by increasing shares of variable renewable energy, but knowledge of its energy market impacts is still lacking. This study modelled different penetrations of residential electric heating and cooling DR in Finland as a part of a 2025 North European energy system for weather years spanning 2011–2016 using the Backbone energy system optimisation framework. The impacts of two DR strategies were compared: a globally optimised DR case where the flexible buildings helped minimise the total energy system costs, and alocally optimised DR case where buildings solely minimised their own heating and cooling costs.Increasing penetrations of globally optimised DR consistently reduced annual total system costs by up to 20–40 M€, as well as Finnish electricity price volatility and peak prices, regardless of weather year. Meanwhile, the impacts of locally optimised DR varied significantly, even causing increased total system costs above 50 % DR penetration under 2011 and 2015 weather. Curiously, increasing DR penetrations were observed to consistently result in more reservoir hydropower being conserved over the simulated years. However, both the annual total system cost and the building-level heating and cooling cost savings always remained below 1 €/m2 of heated gross floor area, raising concerns about the economic viability of residential DR.

  • Open Access

    Estimating the CO2 Impacts of Wind Energy in the Transition Towards Carbon-Neutral Energy Systems

    by Hannele Holttinen, Tomi J. Lindroos, Antti Lehtilä, Tiina Koljonen, Juha Kiviluoma, Magnus Korpås

    In this study, the CO2 reduction benefits of wind energy in the transition towards a carbon-neutral energy system are explored. The marginal benefits of wind energy in replacing CO2 emissions in electricity generation are gradually declining as carbon-emission-reduction targets are fulfilled. However, there is still the potential to reduce emissions by replacing fossil fuels in other energy sectors via electrification. Using the Finnish TIMES-VTT energy system model, this study simulates the impacts of different wind energy scenarios between 2030 and 2050, analyzing the effects of adding or removing 5 TWh of wind energy on power generation. Our findings indicate that the reduction benefits of wind energy vary over time, stemming initially from the generation of electricity but they are increasingly being driven by electrification through lowered electricity prices, and fuel switching, like the replacement of bioenergy in heating and fuel production. Between the years 2030 and 2050, an average marginal emission reduction of 180–270 gCO2eq/kWh was seen, rising to 250–320 gCO2eq/kWh if the impact on reduced carbon sinks through wood chip use was taken into account. Issues using marginal, substitution impacts from simulations are discussed; however, no straightforward methods for capturing the cumulative benefits of assets over their lifetime exist. In transitioning towards a net-zero-carbon energy system, other issues like costs, land use, and social aspects will become more relevant than emission substitution.


  • Open Access

    Analysis of water balance and energy system status in Central Asia for  improved modelling in transboundary river basins  

    by Björn Klöve, Jean-Nicolas Louis, Elyor Shukurov, Matin Rafipour, Taiwo Bamgboye, Rinat Abdurafikov, Juha Kiviluoma

    Water, energy, and food challenges in Central Asia are critical issues, particularly in transboundary river basins like the Amudarya river, where competing demands for limited water resources exacerbate environmental and socio-economic pressures. In Central Asia, e.g. Amudarya river is essential basin for sustainable agriculture in downstream countries like Uzbekistan, which faces significant threats from upstream development projects such as the construction of Rogun Dam in Tajikistan and Qosh Tepa canal in Afghanistan. These ongoing projects are anticipated to decrease water flow significantly, which could severely affect for irrigation systems, increasing energy demands for pumping, and place considerable pressure on agricultural productivity and socio-economic stability. The work presented here aims to integrate water and energy system models to explore water-energy interactions and find sustainable solutions under different scenarios for changes in climate, land, energy and water resources. We use IRENA Flextool for energy and couple it with CWatM and Open Global Glacier Model as hydrological and glacial models, respectively. The presentation will present the current phase of water and energy system analysis of the selected region in Central Asia as well as the current development of model integration. The modelling approach is guided by transboundary case studies from the Tajikistan and Uzbekistan region where transboundary water and energy resources management are characterized by potentially different priorities upstream and downstream countries. The energy system models looks at the operations for power production and is used for planning investments in technologies to support the energy transition in the regions. Hydropower operations are, and will be, strongly influenced by the water availability e.g. precipitations, glaciers, and specific river basins have been selected to assess their operations while integrating an increasing amount of variable renewable energy sources. The water demand, mainly driven by the agricultural activities in Uzbekistan, is dependent on the water available and released from the upstream, both affecting the hydropower production and the transboundary relations. The local and regional setting analysis provides the basis for scenario development on future climate land, energy and water. These water and energy management settings are discussed by examples from the region with the focus on the nexus between water, energy and land.


  • Open Access

    Sensitivity of a Lumped-Capacitance Building Thermal Modelling Approach for Energy-Market-Scale Flexibility Studies

    by Topi Rasku, Raimo Simson, Juha Kiviluoma

    Despite all the literature on building energy management, building-stock-scale models depicting its impact for energy-market-scale optimisation models are lacking. To address this shortcoming, an open-source tool called ArchetypeBuildingModel.jl has been developed for aggregating building-stock-level data into simplified lumped-capacitance thermal models compatible with existing open-source energy-system modelling frameworks. This paper aims to demonstrate the feasibility of these simplified thermal models by comparing their performance against dedicated building simulation software, as well as examining their sensitivity to key modelling and parameter assumptions. Modelling and parameter assumptions comparable to the existing literature achieved an acceptable performance according to ASHRAE Guideline 14 across all tested buildings and nodal configurations. The most robust performance was achieved with a period of variations above 13 days and interior node depth between 0.1 and 0.2 for structural thermal mass calibrations, and with external shading coefficients between 0.6 and 1.0 and solar heat gain convective fractions between 0.4 and 0.6 for solar heat gain calibrations. Furthermore, three-plus-node lumped-capacitance thermal models are recommended when modelling buildings with structures varying in terms of thermal mass. Nevertheless, the ArchetypeBuildingModel.jl performance was found to be robust against uncertain key parameter assumptions, making it plausible for energy-market-scale applications.


  • Open Access

    Economic Model-Predictive Control of Building Heating Systems Using Backbone Energy System Modelling Framework

    by Topi Rasku, Toni Lastusilta, Ala Hasan, Rakesh Ramesh, Juha Kiviluoma

    Accessing the demand-side management potential of the residential heating sector requires sophisticated control capable of predicting buildings’ response to changes in heating and cooling power, e.g., model-predictive control. However, while studies exploring its impacts both for individual buildings as well as energy markets exist, building-level control in large-scale energy system models has not been properly examined. In this work, we demonstrate the feasibility of the open-source energy system modelling framework Backbone for simplified model-predictive control of buildings, helping address the above-mentioned research gap. Hourly rolling horizon optimisations were performed to minimise the costs of flexible heating and cooling electricity consumption for a modern Finnish detached house and an apartment block with ground-to-water heat pump systems for the years 2015–2022. Compared to a baseline using a constant electricity price signal, optimisation with hourly spot electricity market prices resulted in 3.1–17.5% yearly cost savings depending on the simulated year, agreeing with comparable literature. Furthermore, the length of the optimisation horizon was not found to have a significant impact on the results beyond 36 h. Overall, the simplified model-predictive control was observed to behave rationally, lending credence to the integration of simplified building models within large-scale energy system modelling frameworks.