Philip Olufemi Babalola
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Philip Olufemi Babalola has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Christian.A. Bolu
Department of Mechanical Engineering, Covenant University, Ota, Nigeria
6 shared publications O. Kilanko
6 shared publicationsA. I. Inegbenebor
4 shared publicationsOluwaseun Kilanko
Mechanical Engineering Department, College of Engineering, Covenant University
4 shared publicationsSunday O. Oyedepo
Covenant University
4 shared publications- Oluwaseun Kilanko
Covenant University
3 shared publications
Latest Publications
- Open Access
- 7 January 2026
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 684, 01008
Integrating renewable energy using a lecturer's office as a case study: A comprehensive approach to PV system implementation
There has been an increasing rise in the demand for an alternative source of electricity due to the effects of fossil fuels on our environment and humans. Renewable energy has been a sought-after source of energy due to its efficiency, environmental friendliness, and reliability. A small-scale implementation of a Photovoltaic system is the starting point to reducing emissions of greenhouse gases, carbon dioxide, and other unfriendly gases in the environment. Furthermore, it serves as a means of generating energy whenever there is a fluctuation or power off from the utility grid. This project demonstrates the effectiveness of PV systems through accurate load calculation and optimized component design, reducing reliance on fossil fuels, and improving the state of the environment. Data was gathered for accurate sizing of these components and monitoring after installation. A 200W solar panel, a 30A charge controller, a 200AH lithium battery, and a 1000W inverter were used in this project. Post-installation data showed solar output rising from 0.792 to 0.800 kWh, charging currents of 0.9-1.6 A, and battery discharge currents of 2.8–1.2 A with a state-of-charge drop from 100% to 85%, confirming stable performance.
- 7 January 2026
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 684, 01008
Open AccessIntegrating renewable energy using a lecturer's office as a case study: A comprehensive approach to PV system implementation
There has been an increasing rise in the demand for an alternative source of electricity due to the effects of fossil fuels on our environment and humans. Renewable energy has been a sought-after source of energy due to its efficiency, environmental friendliness, and reliability. A small-scale implementation of a Photovoltaic system is the starting point to reducing emissions of greenhouse gases, carbon dioxide, and other unfriendly gases in the environment. Furthermore, it serves as a means of generating energy whenever there is a fluctuation or power off from the utility grid. This project demonstrates the effectiveness of PV systems through accurate load calculation and optimized component design, reducing reliance on fossil fuels, and improving the state of the environment. Data was gathered for accurate sizing of these components and monitoring after installation. A 200W solar panel, a 30A charge controller, a 200AH lithium battery, and a 1000W inverter were used in this project. Post-installation data showed solar output rising from 0.792 to 0.800 kWh, charging currents of 0.9-1.6 A, and battery discharge currents of 2.8–1.2 A with a state-of-charge drop from 100% to 85%, confirming stable performance.
- Open Access
- 7 January 2026
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 684, 02010
Development of a laboratory-scale open channel flow simulator
This presents the design, construction and calibration of a laboratory-scale open-channel flow simulator to enhance the understanding of open-channel hydraulics. The simulation shows key flow behaviours, including critical flow, gradually varied flow (GVF), and the effects of channel roughness. Experimental tests were conducted to analyze flow characteristics with the Froude number ranging from 0.55 to 4.15 downstream and 0.64 to 11.50 upstream in critical flow tests. The manning's roughness coefficient varied between 0.011 and 0.038, this shows significant effect of roughness on flow conditions. Specific energy losses of up to 0.0447m were recorded in critical flow scenarios. The developed simulator serves as a valuable tool for practical learning in hydraulic engineering, offering insights into flow behaviour, energy loss, and channel roughness effects.
- 7 January 2026
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 684, 02010
Open AccessDevelopment of a laboratory-scale open channel flow simulator
This presents the design, construction and calibration of a laboratory-scale open-channel flow simulator to enhance the understanding of open-channel hydraulics. The simulation shows key flow behaviours, including critical flow, gradually varied flow (GVF), and the effects of channel roughness. Experimental tests were conducted to analyze flow characteristics with the Froude number ranging from 0.55 to 4.15 downstream and 0.64 to 11.50 upstream in critical flow tests. The manning's roughness coefficient varied between 0.011 and 0.038, this shows significant effect of roughness on flow conditions. Specific energy losses of up to 0.0447m were recorded in critical flow scenarios. The developed simulator serves as a valuable tool for practical learning in hydraulic engineering, offering insights into flow behaviour, energy loss, and channel roughness effects.
- 7 February 2024
- Published by Springer Nature
- p. 435-448
AI-Integrated Solar Energy Systems for Sustainable Energy in Africa
- 7 February 2024
- Published by Springer Nature
- p. 435-448
AI-Integrated Solar Energy Systems for Sustainable Energy in Africa
- 4 May 2022
- Published by Springer Nature
- p. 143-156
Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overview of Personal Health Monitoring
- 4 May 2022
- Published by Springer Nature
- p. 143-156
Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overview of Personal Health Monitoring
- 4 May 2022
- Published by Springer Nature
- p. 37-44
Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced with Alumina for Automobile Industry
- 4 May 2022
- Published by Springer Nature
- p. 37-44
Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced with Alumina for Automobile Industry
- Open Access
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2437  (1) , 020119
Bioeconomy, digital economy, sharing economy, industry 4.0, and other new concepts: A look at how the pieces fit together
Within the last two decades, in attempts to foster efficient resource use and promote sustainability, scholars have come up with a number of new ideas, paradigms and innovations that have revolutionized how we practice engineering and do business. There are now so many concepts such as bioeconomy, circular economy, digital economy, industry 4.0, and product of service, that one wonders how some of them differ from one another and some stakeholders are left in a state of confusion. This paper attempts to clarify a number of popular concepts, how they differ from each other, and how they fit together to promote sustainable development and foster a healthy society. The study is based on literature survey and drawing on several years of experience working in the research field. The paper is expected to provide a clear perspective of various areas of the research field and eliminate confusion engendered by rapid development of new concepts in the field. In addition, the paper is expected to shed light on how the concepts can be implemented either progressively and/or harmoniously.
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2437  (1) , 020119
Open AccessBioeconomy, digital economy, sharing economy, industry 4.0, and other new concepts: A look at how the pieces fit together
Within the last two decades, in attempts to foster efficient resource use and promote sustainability, scholars have come up with a number of new ideas, paradigms and innovations that have revolutionized how we practice engineering and do business. There are now so many concepts such as bioeconomy, circular economy, digital economy, industry 4.0, and product of service, that one wonders how some of them differ from one another and some stakeholders are left in a state of confusion. This paper attempts to clarify a number of popular concepts, how they differ from each other, and how they fit together to promote sustainable development and foster a healthy society. The study is based on literature survey and drawing on several years of experience working in the research field. The paper is expected to provide a clear perspective of various areas of the research field and eliminate confusion engendered by rapid development of new concepts in the field. In addition, the paper is expected to shed light on how the concepts can be implemented either progressively and/or harmoniously.
- Open Access
- 1 August 2020
- Published by Elsevier in Chemical Data Collections
- Vol. 28
Response surface methodology and artificial neural network analysis of crude palm kernel oil biodiesel production
- 1 August 2020
- Published by Elsevier in Chemical Data Collections
- Vol. 28
Open AccessResponse surface methodology and artificial neural network analysis of crude palm kernel oil biodiesel production
- Open Access
- 1 August 2020
- Published by Elsevier in Data in Brief
- Vol. 31, 105726
Data on artificial neural network and response surface methodology analysis of biodiesel production
- 1 August 2020
- Published by Elsevier in Data in Brief
- Vol. 31, 105726
Open AccessData on artificial neural network and response surface methodology analysis of biodiesel production
- Open Access
- 18 December 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1378
Development of Cashew nut Shelling Machine
- 18 December 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1378
Open AccessDevelopment of Cashew nut Shelling Machine