Ali Omar Turky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ali Omar Turky has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Mohamed Mohamed Rashad
Central Metallurgical Research and Development Institute (CMRDI), Cairo, Egypt
13 shared publications - Mikhael Bechelany
European Institute for Membranes (IEM), UMR-5635, University Montpellier, ENSCM, CNRS, Place Eugène Bataillon, CEDEX 5, F-34095 Montpellier, France
9 shared publications Elsayed M. Elnaggar
4 shared publications- Hailei Zhao
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
3 shared publications - Ahmed Esmail Shalan
Electronic and Magnetic Materials Division, Advanced Materials Department, Central Metallurgical Research and Development Institute (CMRDI), Helwan, Egypt
2 shared publications - Ali Hassan
Department of Computer and Software Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan
2 shared publications
Latest Publications
- 20 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (25) , 44868-44875
Unveiling the structural, optical, mechanical, dielectric and ferroelectric features of lead – zirconate titanate and multi-walled carbon nano tubes (PZT- MWCNTs) for ultrasonic transducers
- 20 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (25) , 44868-44875
Unveiling the structural, optical, mechanical, dielectric and ferroelectric features of lead – zirconate titanate and multi-walled carbon nano tubes (PZT- MWCNTs) for ultrasonic transducers
- 27 February 2023
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 41 (8) , 1-7
The effectiveness of titanium ions toward crystal structure, microstructure and optical properties of La0.5Sr0.5Mn1-xTixO3 nanopowders
Titanium subrogated lanthanum strontium manganite LSMO (La0.5Sr0.5Mn1-xTixO3; Ti ratio = 0.1, 0.2, 0.3, 0.4, 0.5) nanoparticles have been prepared based on an organic acid precursor pathway using glycine-nitrate as a fuel. The effectuation of Ti4+ ion concentration on the crystallo-aspects, microstructure as well as the optical features was scrutinized. Exemplary, orthorhombic perovskite LSMTO with a space group Pbnm were manifested at low annealing temperature 800 °C for period 2h. Further, insertion of Ti4+ ion instead of Mn4+ ion in LSMO commenced to increment the crystallite size from 14 to 24 nm. The FT-IR spectrum demonstrated that band around 600 cm−1 linked to Mn-O become broad imputed to Ti-O stretching modes. The morphology of all samples presented the spherical clusters with enhancing the grain size by incorporation of Ti4+ ion into the LSMO crystal. Band gap energy with boost of Ti4+ ion weight ratio was found to augment from 1.83 to 2.1 eV. Meanwhile, the refractive index was found to slightly minify from 2.78 to 2.66.
- 27 February 2023
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 41 (8) , 1-7
The effectiveness of titanium ions toward crystal structure, microstructure and optical properties of La0.5Sr0.5Mn1-xTixO3 nanopowders
Titanium subrogated lanthanum strontium manganite LSMO (La0.5Sr0.5Mn1-xTixO3; Ti ratio = 0.1, 0.2, 0.3, 0.4, 0.5) nanoparticles have been prepared based on an organic acid precursor pathway using glycine-nitrate as a fuel. The effectuation of Ti4+ ion concentration on the crystallo-aspects, microstructure as well as the optical features was scrutinized. Exemplary, orthorhombic perovskite LSMTO with a space group Pbnm were manifested at low annealing temperature 800 °C for period 2h. Further, insertion of Ti4+ ion instead of Mn4+ ion in LSMO commenced to increment the crystallite size from 14 to 24 nm. The FT-IR spectrum demonstrated that band around 600 cm−1 linked to Mn-O become broad imputed to Ti-O stretching modes. The morphology of all samples presented the spherical clusters with enhancing the grain size by incorporation of Ti4+ ion into the LSMO crystal. Band gap energy with boost of Ti4+ ion weight ratio was found to augment from 1.83 to 2.1 eV. Meanwhile, the refractive index was found to slightly minify from 2.78 to 2.66.
- Open Access
Boost the Crystal Installation and Magnetic Features of Cobalt Ferrite/M-Type Strontium Ferrite Nanocomposites Double Substituted by La3+ and Sm3+ Ions (2CoFe2O4/SrFe12−2xSmxLaxO19)
Spinel cobalt ferrite/hexagonal strontium hexaferrite (2CoFe2O4/SrFe12−2xSmxLaxO19; x = 0.2, 0.5, 1.0, 1.5) nanocomposites were fabricated using the tartaric acid precursor pathway, and the effects of La3+–Sm3+ double substitution on the formation, structure, and magnetic properties of CoFe2O4/SrFe12−2xSmxLaxO19 nanocomposite at different annealing temperatures were assayed through X-ray diffraction, scanning electron microscopy, and vibrating sample magnetometry. A pure 2CoFe2O4/SrFe12O19 nanocomposite was obtained from the tartrate precursor complex annealed at 1100 °C for 2 h. The substitution of Fe3+ ion by Sm3–+La3+ions promoted the formation of pure 2CoFe2O4/SrFe12O19 nanocomposite at 1100 °C. The positions and intensities of the strongest peaks of hexagonal ferrite changed after Sm3+–La3+ substitution at ≤1100 °C. In addition, samples with an Sm3+–La3+ ratio of ≥1.0 annealed at 1200 °C for 2 h showed diffraction peaks for lanthanum cobalt oxide (La3Co3O8; dominant phase) and samarium ferrite (SmFeO3). The crystallite size range at all constituent phases was in the nanocrystalline range, from 39.4 nm to 122.4 nm. The average crystallite size of SrFe12O19 phase increased with the number of Sm3+–La3+ substitutions, whereas that of CoFe2O4 phase decreased with an x of up to 0.5. La–Sm co-doped ion substitution increased the saturation magnetization (Ms) value and the subrogated ratio to 0.2, and the Ms value decreased with the increasing number of double substitutions. A high saturation magnetization value (Ms = 69.6 emu/g) was obtained using a La3+–Sm3+ co-doped ratio of 0.2 at 1200 for 2 h, and a high coercive force value (Hc = 1192.0 Oe) was acquired using the same ratio at 1000 °C.
Open AccessBoost the Crystal Installation and Magnetic Features of Cobalt Ferrite/M-Type Strontium Ferrite Nanocomposites Double Substituted by La3+ and Sm3+ Ions (2CoFe2O4/SrFe12−2xSmxLaxO19)
Spinel cobalt ferrite/hexagonal strontium hexaferrite (2CoFe2O4/SrFe12−2xSmxLaxO19; x = 0.2, 0.5, 1.0, 1.5) nanocomposites were fabricated using the tartaric acid precursor pathway, and the effects of La3+–Sm3+ double substitution on the formation, structure, and magnetic properties of CoFe2O4/SrFe12−2xSmxLaxO19 nanocomposite at different annealing temperatures were assayed through X-ray diffraction, scanning electron microscopy, and vibrating sample magnetometry. A pure 2CoFe2O4/SrFe12O19 nanocomposite was obtained from the tartrate precursor complex annealed at 1100 °C for 2 h. The substitution of Fe3+ ion by Sm3–+La3+ions promoted the formation of pure 2CoFe2O4/SrFe12O19 nanocomposite at 1100 °C. The positions and intensities of the strongest peaks of hexagonal ferrite changed after Sm3+–La3+ substitution at ≤1100 °C. In addition, samples with an Sm3+–La3+ ratio of ≥1.0 annealed at 1200 °C for 2 h showed diffraction peaks for lanthanum cobalt oxide (La3Co3O8; dominant phase) and samarium ferrite (SmFeO3). The crystallite size range at all constituent phases was in the nanocrystalline range, from 39.4 nm to 122.4 nm. The average crystallite size of SrFe12O19 phase increased with the number of Sm3+–La3+ substitutions, whereas that of CoFe2O4 phase decreased with an x of up to 0.5. La–Sm co-doped ion substitution increased the saturation magnetization (Ms) value and the subrogated ratio to 0.2, and the Ms value decreased with the increasing number of double substitutions. A high saturation magnetization value (Ms = 69.6 emu/g) was obtained using a La3+–Sm3+ co-doped ratio of 0.2 at 1200 for 2 h, and a high coercive force value (Hc = 1192.0 Oe) was acquired using the same ratio at 1000 °C.
- Open Access
A Robust and Highly Precise Alternative against the Proliferation of Intestinal Carcinoma and Human Hepatocellular Carcinoma Cells Based on Lanthanum Strontium Manganite Nanoparticles
In this report, lanthanum strontium manganite at different Sr2+ ion concentrations, as well as Gd3+ or Sm3+ ion substituted La0.5−YMYSr0.5MnO3 (M = Gd and Sm, y = 0.2), have been purposefully tailored using a sol gel auto-combustion approach. XRD profiles confirmed the formation of a monoclinic perovskite phase. FE-SEM analysis displayed a spherical-like structure of the La0.8Sr0.2MnO3 and La0.3Gd0.2Sr0.2MnO3 samples. The particle size of the LSM samples was found to decrease with increased Sr2+ ion concentration. For the first time, different LSM concentrations were inspected for their cytotoxic activity against CACO-2 (intestinal carcinoma cells) and HepG-2 (human hepatocellular carcinoma cells). The cell viability for CACO-2 and HepG-2 was assayed and seen to decrease depending on the Sr2+ ion concentration. Half maximal inhibitory concentration IC50 of CACO-2 cell and HepG-2 cell inhibition was connected with Sr2+ ion ratio. Low IC50 was noticable at low Sr2+ ion content. Such results were correlated to the particle size and the morphology. Indeed, the IC50 of CACO-2 cell inhibition by LSM at a strontium content of 0.2 was 5.63 ± 0.42 µg/mL, and the value increased with increased Sr2+ ion concentration by up to 0.8 to be = 25 ± 2.7 µg/mL. Meanwhile, the IC50 of HepG-2 cell inhibition by LSM at a strontium content of 0.2 was 6.73 ± 0.4 µg/mL, and the value increased with increased Sr2+ ion concentration by up to 0.8 to be 31± 3.1 µg/mL. All LSM samples at different conditions were tested as antimicrobial agents towards fungi, Gram positive bacteria, and Gram negative bacteria. For instance, all LSM samples were found to be active towards Gram negative bacteria Escherichia coli, whereas some samples have presumed antimicrobial effect towards Gram negative bacteria Proteus vulgaris. Such results confirmed that LSM samples possessed cytotoxicity against CACO-2 and HepG-2 cells, and they could be considered to play a substantial role in pharmaceutical and therapeutic applications.
Open AccessA Robust and Highly Precise Alternative against the Proliferation of Intestinal Carcinoma and Human Hepatocellular Carcinoma Cells Based on Lanthanum Strontium Manganite Nanoparticles
In this report, lanthanum strontium manganite at different Sr2+ ion concentrations, as well as Gd3+ or Sm3+ ion substituted La0.5−YMYSr0.5MnO3 (M = Gd and Sm, y = 0.2), have been purposefully tailored using a sol gel auto-combustion approach. XRD profiles confirmed the formation of a monoclinic perovskite phase. FE-SEM analysis displayed a spherical-like structure of the La0.8Sr0.2MnO3 and La0.3Gd0.2Sr0.2MnO3 samples. The particle size of the LSM samples was found to decrease with increased Sr2+ ion concentration. For the first time, different LSM concentrations were inspected for their cytotoxic activity against CACO-2 (intestinal carcinoma cells) and HepG-2 (human hepatocellular carcinoma cells). The cell viability for CACO-2 and HepG-2 was assayed and seen to decrease depending on the Sr2+ ion concentration. Half maximal inhibitory concentration IC50 of CACO-2 cell and HepG-2 cell inhibition was connected with Sr2+ ion ratio. Low IC50 was noticable at low Sr2+ ion content. Such results were correlated to the particle size and the morphology. Indeed, the IC50 of CACO-2 cell inhibition by LSM at a strontium content of 0.2 was 5.63 ± 0.42 µg/mL, and the value increased with increased Sr2+ ion concentration by up to 0.8 to be = 25 ± 2.7 µg/mL. Meanwhile, the IC50 of HepG-2 cell inhibition by LSM at a strontium content of 0.2 was 6.73 ± 0.4 µg/mL, and the value increased with increased Sr2+ ion concentration by up to 0.8 to be 31± 3.1 µg/mL. All LSM samples at different conditions were tested as antimicrobial agents towards fungi, Gram positive bacteria, and Gram negative bacteria. For instance, all LSM samples were found to be active towards Gram negative bacteria Escherichia coli, whereas some samples have presumed antimicrobial effect towards Gram negative bacteria Proteus vulgaris. Such results confirmed that LSM samples possessed cytotoxicity against CACO-2 and HepG-2 cells, and they could be considered to play a substantial role in pharmaceutical and therapeutic applications.
- 1 January 2020
- Published by Elsevier in Measurement
- Vol. 150, 106888
Achieving exceedingly constructional characterization of magnesia-yttria (MgO-Y2O3) nanocomposite obtained via oxalate precursor strategy
- 1 January 2020
- Published by Elsevier in Measurement
- Vol. 150, 106888
Achieving exceedingly constructional characterization of magnesia-yttria (MgO-Y2O3) nanocomposite obtained via oxalate precursor strategy
- 5 July 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (17) , 14582-14588
Efficacious realization of Ba0.5Sr0.5TixM1−xO3 (M = Mn2+, Co2+) perovskite nanostructures through oxalate precursor strategy
- 5 July 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (17) , 14582-14588
Efficacious realization of Ba0.5Sr0.5TixM1−xO3 (M = Mn2+, Co2+) perovskite nanostructures through oxalate precursor strategy
- 31 August 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (23) , 17526-17532
Enhanced the structure and optical properties for ZnO/PVP nanofibers fabricated via electrospinning technique
- 31 August 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (23) , 17526-17532
Enhanced the structure and optical properties for ZnO/PVP nanofibers fabricated via electrospinning technique
- 31 May 2017
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 36 (7) , 873-877
An investigation of structure and electrical characteristics of lanthanum strontium manganite nanopowders with different Sr 2+ ion concentrations
Generally, the efficiency of solid oxide fuel cells is heavily dependent on the electrocatalytic activity of the cathode toward the oxygen reduction reaction. In order to achieve a better cathode performance, LaxSr1-xMnO3 (LSM) nanopowders with different Sr2+ ion contents varying from 0.2 to 0.8 have been synthesized using the coprecipitation method. The obtained nanoparticles were characterized by x-ray diffraction, field emission scanning electron microscopy, and electrochemical impedance spectroscopy. It was found that the LSM nanoparticles seemed to exhibit high polarization resistance with the increase of the Sr2+ ion molar ratios. The crystallite size was found to increase from 16.4 to 24.3 nm with increasing Sr2+ content from 0.2 to 0.8. The lattice parameters were decreased with Sr2+ ion content which may be caused by an increase in internal stress with the increasing grain size of LSM. Meanwhile, the real part impedance (Z′) was increased from 10 (Ω) at 0.2 Sr2+ to 24 (Ω) at 0.8 Sr2+ ion ratio. Alternatively, |Z| of prepared sample was increased from 12 to 26 (Ω) by increasing Sr2+ ion molar ratios from 0.2 to 0.8.
- 31 May 2017
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 36 (7) , 873-877
An investigation of structure and electrical characteristics of lanthanum strontium manganite nanopowders with different Sr 2+ ion concentrations
Generally, the efficiency of solid oxide fuel cells is heavily dependent on the electrocatalytic activity of the cathode toward the oxygen reduction reaction. In order to achieve a better cathode performance, LaxSr1-xMnO3 (LSM) nanopowders with different Sr2+ ion contents varying from 0.2 to 0.8 have been synthesized using the coprecipitation method. The obtained nanoparticles were characterized by x-ray diffraction, field emission scanning electron microscopy, and electrochemical impedance spectroscopy. It was found that the LSM nanoparticles seemed to exhibit high polarization resistance with the increase of the Sr2+ ion molar ratios. The crystallite size was found to increase from 16.4 to 24.3 nm with increasing Sr2+ content from 0.2 to 0.8. The lattice parameters were decreased with Sr2+ ion content which may be caused by an increase in internal stress with the increasing grain size of LSM. Meanwhile, the real part impedance (Z′) was increased from 10 (Ω) at 0.2 Sr2+ to 24 (Ω) at 0.8 Sr2+ ion ratio. Alternatively, |Z| of prepared sample was increased from 12 to 26 (Ω) by increasing Sr2+ ion molar ratios from 0.2 to 0.8.
- 30 January 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (9) , 6878-6886
Optical, electrical and magnetic properties of lanthanum strontium manganite La 1−x Sr x MnO 3 synthesized through the citrate combustion method
Generally, strontium-doped lanthanum manganites (LSM) are materials connected ordinarily as cathodes in the solid oxide fuel cell (SOFC). In this study, the structural, optical, electrical and magnetic properties of La1−xSrxMnO3 (x = 0.2, 0.5, 0.8) synthesized using an organic acid precursor strategy were investigated, based on using citric acid as a fuel. Evidently, the results disclosed that a pure single monoclinic LSM phase was obtained from the thermally treated precursors annealed at 1000 °C with an annealing time of 2 h. The microstructure of the formed sample relied on the Sr2+ ion content. Moreover, a good optical transparency of 45–60% in a wide range of wavelengths between 800 and 1800 nm for all samples substituted by Sr2+ ions was performed. The optical band gap energy was increased from 2.09 to 2.76 eV by increasing the Sr2+ ion molar ratios. The trend in the calculated refractive index, the high frequency dielectric constant (εα) and the static dielectric constant (ε0) of all the produced samples can be linked to an increase in the Sr2+ ion concentration. Moreover, the magnetic properties were enhanced with increasing Sr2+ ion content.
- 30 January 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (9) , 6878-6886
Optical, electrical and magnetic properties of lanthanum strontium manganite La 1−x Sr x MnO 3 synthesized through the citrate combustion method
Generally, strontium-doped lanthanum manganites (LSM) are materials connected ordinarily as cathodes in the solid oxide fuel cell (SOFC). In this study, the structural, optical, electrical and magnetic properties of La1−xSrxMnO3 (x = 0.2, 0.5, 0.8) synthesized using an organic acid precursor strategy were investigated, based on using citric acid as a fuel. Evidently, the results disclosed that a pure single monoclinic LSM phase was obtained from the thermally treated precursors annealed at 1000 °C with an annealing time of 2 h. The microstructure of the formed sample relied on the Sr2+ ion content. Moreover, a good optical transparency of 45–60% in a wide range of wavelengths between 800 and 1800 nm for all samples substituted by Sr2+ ions was performed. The optical band gap energy was increased from 2.09 to 2.76 eV by increasing the Sr2+ ion molar ratios. The trend in the calculated refractive index, the high frequency dielectric constant (εα) and the static dielectric constant (ε0) of all the produced samples can be linked to an increase in the Sr2+ ion concentration. Moreover, the magnetic properties were enhanced with increasing Sr2+ ion content.