YYYuan-Qiu-Qiang Yi

Yuan-Qiu-Qiang Yi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan-Qiu-Qiang Yi has a total of 129 co-authors. Here are the top co-authors by number of shared publications:

  • Chenxi Li

    The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, State Key Laboratory of Elemento-Organic Chemistry, College of Chemistry, Renewable Energy Conversion and Storage Center (RECAST), Nankai University, Tianjin 300071, China

    15 shared publications
  • Yongsheng Chen

    The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials Institute of Polymer Chemistry Renewable Energy Conversion and Storage Center (RECAST) College of Chemistry Nankai University Tianjin China

    15 shared publications
  • Wenming Su

    Printable Electronics Research Center, Nano Devices and Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, China

    14 shared publications
  • Zheng Cui

    Printable Electronics Research Center, Nano Devices and Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, Jiangsu 215123, China

    13 shared publications
  • Liming Xie

    Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China

    10 shared publications
  • Xin Ke

    The Key Laboratory of Functional Polymer Materials, State Key Laboratory and Institute of Elemento-Organic Chemistry, Centre of Nanoscale Science and Technology, College of Chemistry, Nankai University, Tianjin 300071, China

    10 shared publications

Latest Publications

  • Open Access

    Cross-dehydrogenative coupling macrocyclization for the construction of donor–acceptor nanohoops

    by Baitan Chakraborty, Yury Torubaev, Yuan-Qiu-Qiang Yi, Naoki Nakatani, Christine K. Luscombe

    Catalytic cross-dehydrogenative coupling (CDC) and a mild reductive elimination strategy furnished a donor–acceptor nanohoop architecture. Direct C–H activation leads to high atom- & step economy. Guest-dependent solid-state properties were studied.

  • Open Access

    Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching

    by Yuan-Qiu-Qiang Yi, Nadege Bonnet, Kodai Yamanaka, Katherine Lei, Arianna Magni, Alberto Salleo, Itaru Osaka, Christine K. Luscombe

    Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly­(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.


  • Short-range aggregation regulation of conjugated polymers: high mobility and cyclic tensile stability driven by chemical crosslinking

    by Rui Chen, Yiting Liu, Teng Li, Zhongxiang Peng, Hongxiang Li, Sichao Huang, Zicheng Ding, Xiaozheng Duan, Yuan-Qiu-Qiang Yi, Yanchun Han

    Conjugated polymer films show great potential in wearable electronics. However, it is challenging to maintain the initial electrical performance of conjugated polymer films during cyclic stretching. Herein, we modulate the electrical and mechanical properties of a conjugated polymer poly(indenothiophene-co-benzothiadiazole) (IDTBT) by chemical crosslinking with a small molecule (((oxybis(ethane-2,1-diyl))bis(oxy))bis(4,1-phenylene))bis(phenylmethanone) (BP), aiming to improve the electrical stability during cyclic stretching. Under ultraviolet illumination, BP with two benzophenone end groups can form high-activity biradicals to abstract the aliphatic hydrogens on the alkyl sidechains of IDTBT, producing a crosslinked film. Compared to the pristine film, the crosslinked film shows decreased long-range ordering but tightly packed π–π stacks with more co-planar backbones. During stretching, the flexible oligomeric (ethylene glycol) linkers enhance the conformational freedom of polymer chains and the chemical crosslinking prevents irreversible chain slippage, significantly enhancing cyclic stretchability. Meanwhile, the physical crosslinked short-range ordered aggregates provide efficient charge transport channels. Consequently, the crosslinked film shows the charge carrier mobility of 0.92 ± 0.03 cm2 V−1 s−1 at 100% strain and the nearly constant mobility of 0.86 ± 0.04 cm2 V−1 s−1 after cyclic stretching-releasing at 30% strain for 1000 times.


  • Open Access

    Synthesis, Photo-Physical Properties, and Electroluminescence Characteristics of Iridium Phosphorescent Materials Based on Different β-Diketonate Ancillary Ligands

    by Qiaowen Chang, Ke Zhang, Caixian Yan, Liming Xie, Yuanqiuqiang Yi, Wenming Su, Weiping Liu

    Organic light-emitting diodes (OLEDs) based on phosphorescent materials are among the most promising technologies for displays and lightings. For red-emitting heteroleptic iridium complexes (HICs), vast and major research has been focused on the design and synthesis of cyclometalated ligands, while relatively little attention has been given to ancillary ligands which also play important roles in manipulating the optoelectronic and electroluminescent properties of HICs. Seven deep red-emitting HICs were designed and synthesized by systematically modifying the alkyl groups in β-diketone-type ancillary ligands. These HICs exhibited similar physical and optoelectronic properties, with OLED devices based on these materials achieving consistent emission peaks at 624 nm and CIE coordinates of (0.68, 0.32). Among the synthesized HICs, Ir(dmippiq)₂(dmeacac), featuring 3,7-dimethyl-4,6-nonanedione as the ancillary ligand, demonstrated the best OLED performance, achieving a champion external quantum efficiency (EQE) of 18.26%. This result highlights that engineering the alkyl groups in β-diketone ancillary ligands can significantly enhance device performance.


  • Open Access

    A general strategy to achieve see-through devices through the micro-structuring of colored functional materials

    by Zishou Hu, Xueqing Tang, Yuan-Qiu-Qiang Yi, Shuhong Nie, Xiaolian Chen, Wenya Xu, Chenchao Huang, Xinju Mu, Zhongsheng Ma, Pengyu Tang, et al.

    Irrespective of the specific see-through device, obtaining optimal transparency remains the primary goal. In this work, we introduce a general strategy to enhance the transparency of various see-through devices. We achieve this by structuring the colored functional materials into imperceptible three-dimensional mesh lines, addressing a common challenge in multi-layer structures where each layer causes a reduction in transparency due to their color or opacity. To overcome this limitation, we selectively integrate functional materials into micron-wide groove structures transforming functional layers to functional meshes. Regardless of the initial color of the functional material, the resulting functional mesh can exhibit a high transmittance of 88% (vs. air) under any operating state while maintaining its intended function within the device. We apply this strategy to fabricate proof-of-concept of devices such as electrochromic devices, supercapacitors, and zinc batteries, all of which exhibit remarkable overall transparency when compared to the multi-layer device.


  • A Novel Crosslinked Hole Transport Layer with Enhanced Charge Injection Balance for Highly Efficient Inkjet-Printed Blue Quantum Dot-Based Light-Emitting Diodes

    by Liming Xie, Jinrong Shi, Ting Wang, Qing Li, Yuan-Qiu-Qiang Yi, Qing Zhang, Yang Liu, Wenming Su, Byung Seong Bae, Damian Chinedu Onwudiwe, et al.

    In this work, an efficient and robust hole transport layer (HTL) based on blended poly((9,9-dioctylfluorenyl-2,7-diyl)-alt-(9-(2-ethylhexyl)-carbazole-3,6-diyl)) (PF8Cz) and crosslinkable 3,3′-(9,9-dimethyl-9H-fluorene-2,7-diyl)bis(9-(4-vinylphenyl)-9H-carbazole) (FLCZ-V) is introduced for high-performance and stable blue quantum dot-based light-emitting diodes (QLEDs), wherein FLCZ-V can in situ-crosslink to a continuous network polymer after thermal treatment and the linear polymer PF8CZ becomes intertwined and imprisoned. As a result, the blended HTL shows a high hole mobility (1.27 × 10–4 cm2 V–1 s–1) and gradient HOMO levels (−5.4 eV of PF8CZ and −5.7 eV of FLCZ-V) that can facilitate hole injecting so as to ameliorate the charge balance and, at the same time, achieve better electron-blocking capability that can effectively attenuate HTL decomposition. Meanwhile, the crosslinked blended HTL showed excellent solvent resistance and a high surface energy of 40.34 mN/m, which is favorable to enhance wettability for the deposition of a follow-up layer and attain better interfacial contact. Based on the blended HTL, blue QLEDs were fabricated by both spin-coating and inkjet printing. For the spin-coated blue QLED, a remarkable enhancement of external quantum efficiency (EQE) of 15.5% was achieved. Also, the EQE of the inkjet-printed blue QLED reached 9.2%, which is thus far the best result for the inkjet-printed blue QLED.


  • Nondestructive Direct Patterning of Both Hole Transport and Emissive Layers for Pixelated Quantum-Dot Light-Emitting Diodes

    by Yuan-Qiu-Qiang Yi, Fuyan Su, Wenya Xu, Qing Zhang, Shuo Zhang, Liming Xie, Wenming Su, Zheng Cui, Christine K. Luscombe

    Considering the increasing demand for high-resolution light-emitting diodes (LEDs), it is important that direct fine patterning technologies for LEDs be developed, especially for quantum-dot LEDs (QLEDs). Traditionally, the patterning of QLEDs relies on resin-based photolithography techniques, requiring multiple steps and causing performance deterioration. Nondestructive direct patterning may provide an easy and stepwise method to achieve fine-pixelated units in QLEDs. In this study, two isomeric tridentate cross-linkers (X8/X9) are presented and can be blended into the hole transport layer (HTL) and the emissive layer (EML) of QLEDs. Because of their photosensitivity, the in situ cross-linking process can be efficiently triggered by ultraviolet irradiation, affording high solvent resistance and nondestructive direct patterning of the layers. Red QLEDs using the cross-linked HTL demonstrate an impressive external quantum efficiency of up to 22.45%. Through lithographic patterning enabled by X9, line patterns of HTL and EML films exhibit widths as narrow as 2 and 4 μm, respectively. Leveraging the patterned HTL and EML, we show the successful fabrication of pixelated QLED devices with an area size of 3 × 3 mm2, alongside the successful production of dual-color pixelated QLED devices. These findings showcase the promising potential of direct patterning facilitated by engineered cross-linkers for the cost-effective fabrication of pixelated QLED displays.


  • Optimizing thermal annealing temperatures towards improved and stable electrochromic polymeric films and devices

    by Rui Ji, Yuan-Qiu-Qiang Yi, Xiaohai Wang, Xinzhou Wu, Chengchao Huang, Wenming Su, Zheng Cui


  • Bioinspired multi-dimensional anti-counterfeiting device by combining electrochromism and structural color

    by Zhumin Yu, Kai Zhao, Yanbo Zhao, Mengyue Wu, Rong Qian, Xinzhou Wu, Wenming Su, Yuan-Qiu-Qiang Yi, Changqing Ye, Yanlin Song


  • 通过具有高表面能和延长共轭链段的耐溶剂空穴传输材料实现高效喷墨打印QLED

    by Gengrui Qiu, Yuan-Qiu-Qiang Yi, Liming Xie, Fuyan Su, Ting Wang, Wenming Su, Zheng Cui