Alberto Bolzoni
Alberto Bolzoni has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Roberto Perini
Politecnico di Milano,Department of Energy,Milano,IT
4 shared publicationsAndrew Forsyth
The University of Manchester,The Department of Electrical and Electronic Engineering,Manchester,UK
3 shared publicationsLuisa Frosio
EPS, via Grazzini 14, 20158 Milano, Italy
3 shared publicationsRebecca Todd
The University of Manchester,The Department of Electrical and Electronic Engineering,Manchester,UK
3 shared publications- Qingwei Zhu
Key Laboratory of Power Electronics and Electric Drives, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China
2 shared publications - Roberto Perini
Department of Energy, Politecnico di Milano, Milano, Italy
2 shared publications
Latest Publications
- 14 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (2) , 1479-1490
Optimal Virtual Power Plant Management for Multiple Grid Support Services
A hierarchical control architecture is proposed for the optimal day-ahead commitment of multiple grid support services within a virtual power plant (VPP). The day-ahead optimisation considers pricing and cost data to determine the commitment schedule, and a robust Model Predictive Control (MPC) approach is included to minimise the unbalance fees during real-time operations. The multi-level control has been demonstrated experimentally using a hybrid test system, where the VPP is formed of a commercial 240 kW, 180 kWh battery energy storage system (BESS), while the additional assets are modelled in a real-time digital simulator (RTDS). Two case studies are analysed: the first assumes a purely-electrical VPP, with a single connection to the public network; the second involves a multi-energy approach, with the introduction of a gas-supplied Combined Heat and Power unit (CHP). Both winter and summer price scenarios are tested. The results show the superiority of the multiple-service operation compared to providing a single grid support service. For example, the net revenue is increased by 30% (winter) and 7% (summer) when compared to just frequency regulation, and by +99% (winter) and 30% (summer) when compared to only energy arbitrage.
- 14 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (2) , 1479-1490
Optimal Virtual Power Plant Management for Multiple Grid Support Services
A hierarchical control architecture is proposed for the optimal day-ahead commitment of multiple grid support services within a virtual power plant (VPP). The day-ahead optimisation considers pricing and cost data to determine the commitment schedule, and a robust Model Predictive Control (MPC) approach is included to minimise the unbalance fees during real-time operations. The multi-level control has been demonstrated experimentally using a hybrid test system, where the VPP is formed of a commercial 240 kW, 180 kWh battery energy storage system (BESS), while the additional assets are modelled in a real-time digital simulator (RTDS). Two case studies are analysed: the first assumes a purely-electrical VPP, with a single connection to the public network; the second involves a multi-energy approach, with the introduction of a gas-supplied Combined Heat and Power unit (CHP). Both winter and summer price scenarios are tested. The results show the superiority of the multiple-service operation compared to providing a single grid support service. For example, the net revenue is increased by 30% (winter) and 7% (summer) when compared to just frequency regulation, and by +99% (winter) and 30% (summer) when compared to only energy arbitrage.
- 2 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (2) , 863-873
Feedback Couplings Evaluation on Synthetic Inertia Provision for Grid Frequency Support
Emulation mechanisms of the physical synchronous generators obtained through convert-interfaced units are becoming extremely popular in literature. Still the impact of these strategies on networks frequency transients often does not take into account the effect of the converter DC-bus regulation, that plays a significant role in the dynamics definition. Thus two of the main synthetic inertia architectures are analysed both mathematically and experimentally in this paper: differently from the available literature, the goal is not just to compare their macroscopic effects on network behaviour, but rather to identify the impact of the multiple internal control feedbacks on the inertia provision itself.
- 2 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (2) , 863-873
Feedback Couplings Evaluation on Synthetic Inertia Provision for Grid Frequency Support
Emulation mechanisms of the physical synchronous generators obtained through convert-interfaced units are becoming extremely popular in literature. Still the impact of these strategies on networks frequency transients often does not take into account the effect of the converter DC-bus regulation, that plays a significant role in the dynamics definition. Thus two of the main synthetic inertia architectures are analysed both mathematically and experimentally in this paper: differently from the available literature, the goal is not just to compare their macroscopic effects on network behaviour, but rather to identify the impact of the multiple internal control feedbacks on the inertia provision itself.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 515-520
Real-time Auto-regressive Modelling of Electric Power Network Frequency
Active network management is an essential part of future electric power networks with high-concentrations of renewable and energy storage assets. Several active network management techniques utilise predictions of network variables, and in this research, an optimal real-time predictor for grid frequency evolution is analysed. In particular, the analytical and numerical characteristics of auto-regressive estimation for the prediction of the frequency evolution in electrical systems are taken into account. Two case studies are considered to evaluate the performance of the frequency predictors; an isolated small-scale microgrid system and the UK public grid; both are representative of future power networks. As for the public network case, the auto-regressive approach guarantees an improvement of 20% with respect to the zero-order hold estimator and up to 70% with respect to the linear approximation.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 515-520
Real-time Auto-regressive Modelling of Electric Power Network Frequency
Active network management is an essential part of future electric power networks with high-concentrations of renewable and energy storage assets. Several active network management techniques utilise predictions of network variables, and in this research, an optimal real-time predictor for grid frequency evolution is analysed. In particular, the analytical and numerical characteristics of auto-regressive estimation for the prediction of the frequency evolution in electrical systems are taken into account. Two case studies are considered to evaluate the performance of the frequency predictors; an isolated small-scale microgrid system and the UK public grid; both are representative of future power networks. As for the public network case, the auto-regressive approach guarantees an improvement of 20% with respect to the zero-order hold estimator and up to 70% with respect to the linear approximation.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 2354-2359
Dynamical Characterization of Grid-Scale Energy Storage Assets
The advent of affordable grid-scale electrochemical energy storage units is radically changing modern electrical grids: the availability of fast-responding devices is opening new regulation paradigms for power networks and contributing to the system optimization. In this perspective, the characterization of the dynamical performance of the available commercial devices represents a crucial step in the assessment of the regulation capabilities of these technologies. In this paper, a 240 kVA lithium-ion storage device is considered: the aim is to develop a rigorous characterization procedure which enables the realization of a reliable dynamical model of the system, starting from the available experimental measurements. The resulting dynamical model has a maximum error of 5% when compared to the equivalent experimental data.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 2354-2359
Dynamical Characterization of Grid-Scale Energy Storage Assets
The advent of affordable grid-scale electrochemical energy storage units is radically changing modern electrical grids: the availability of fast-responding devices is opening new regulation paradigms for power networks and contributing to the system optimization. In this perspective, the characterization of the dynamical performance of the available commercial devices represents a crucial step in the assessment of the regulation capabilities of these technologies. In this paper, a 240 kVA lithium-ion storage device is considered: the aim is to develop a rigorous characterization procedure which enables the realization of a reliable dynamical model of the system, starting from the available experimental measurements. The resulting dynamical model has a maximum error of 5% when compared to the equivalent experimental data.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2523-2529
Impact of Energy Storage System Response Speed on Enhanced Frequency Response Services
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2523-2529
Impact of Energy Storage System Response Speed on Enhanced Frequency Response Services
- 21 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 9 (6) , 6656-6665
Impact of Line and Control Parameters on Droop Stability in Inverters for Distributed Generation
The paper analyzes stability conditions and design requirements for the control parameters in droop-controlled inverters. The analysis focusses on a single inverter unit with AC (output) filters and interface transformer, as this may be regarded as the elementary component of a distributed generation system. Through a process of thought simplifications and manipulations, the linearized full state-space model is transformed into a unique single-input, single-output system comprising several nested loops. The resulting analytical model in terms of transfer functions has enough “structure” to represent interactions between the different actors of the overall control, such as droop linear and derivative terms, virtual impedance and voltage controllers. Stability conditions for the corresponding parameters are then derived analytically. Experimental tests are carried out on the complete system to check the reliability of the proposed model.
- 21 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 9 (6) , 6656-6665
Impact of Line and Control Parameters on Droop Stability in Inverters for Distributed Generation
The paper analyzes stability conditions and design requirements for the control parameters in droop-controlled inverters. The analysis focusses on a single inverter unit with AC (output) filters and interface transformer, as this may be regarded as the elementary component of a distributed generation system. Through a process of thought simplifications and manipulations, the linearized full state-space model is transformed into a unique single-input, single-output system comprising several nested loops. The resulting analytical model in terms of transfer functions has enough “structure” to represent interactions between the different actors of the overall control, such as droop linear and derivative terms, virtual impedance and voltage controllers. Stability conditions for the corresponding parameters are then derived analytically. Experimental tests are carried out on the complete system to check the reliability of the proposed model.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Modified droop control for the optimal management of the battery systems in isolated microgrids
Microgrids are often made up with Hybrid Power Plants (HPPs), which include storage batteries. To enhance system efficiency, it is important to manage the batteries so as to avoid that one gets charged at other batteries' expense. To reduce costs and increase robustness, a Microgrid Controller that communicates with all the HPPs can be avoided and the droop control is often adopted for the HPPs' interface inverters. This paper proposes a method to change the droop coefficients so as to get the described target with no communication available between the HPPs. Theoretical analysis is validated through a simulation carried out on a study case.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Modified droop control for the optimal management of the battery systems in isolated microgrids
Microgrids are often made up with Hybrid Power Plants (HPPs), which include storage batteries. To enhance system efficiency, it is important to manage the batteries so as to avoid that one gets charged at other batteries' expense. To reduce costs and increase robustness, a Microgrid Controller that communicates with all the HPPs can be avoided and the droop control is often adopted for the HPPs' interface inverters. This paper proposes a method to change the droop coefficients so as to get the described target with no communication available between the HPPs. Theoretical analysis is validated through a simulation carried out on a study case.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A stability-oriented design method for virtual impedance loop in droop-controlled converters
In this paper, a novel strategy for virtual impedance design in droop-connected converters is analysed; the method is based on the stability analysis of equivalent system loops and aims at defining feasible operating regions of the converter depending on the control parameters. The effect of the tuning on the regulating performances of the system then has been tested in a simulation environment.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A stability-oriented design method for virtual impedance loop in droop-controlled converters
In this paper, a novel strategy for virtual impedance design in droop-connected converters is analysed; the method is based on the stability analysis of equivalent system loops and aims at defining feasible operating regions of the converter depending on the control parameters. The effect of the tuning on the regulating performances of the system then has been tested in a simulation environment.
- 13 August 2016
- Published by Springer Nature
- p. 291-298
Day-ahead PV Power Forecast by Hybrid ANN Compared to the Five Parameters Model Estimated by Particle Filter Algorithm
- 13 August 2016
- Published by Springer Nature
- p. 291-298
Day-ahead PV Power Forecast by Hybrid ANN Compared to the Five Parameters Model Estimated by Particle Filter Algorithm