Rebecca Jayne Thorne
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Rebecca Jayne Thorne has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
Hogne Linga
Hydro Aluminium AS, NO-6881 Årdal, Norway
9 shared publicationsLorentz Petter Lossius
Hydro Aluminium AS, NO-6881 Årdal, Norway
9 shared publicationsArne Petter Ratvik
SINTEF Industry, NO-7465 Trondheim, Norway
8 shared publicationsCamilla Sommerseth
Norwegian University of Science and Technology, Materials Science and Engineering
7 shared publicationsEspen Sandnes
Dept. of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim, Norway
6 shared publicationsAnn Mari Svensson
Dept. of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim, Norway
5 shared publications
Latest Publications
- Open Access
- 19 August 2026
- Published by Elsevier in Transport Policy
- Vol. 188
End-of-life electric vehicle batteries in Norway: System mapping of flows, responsibilities, and circularity barriers
- 19 August 2026
- Published by Elsevier in Transport Policy
- Vol. 188
Open AccessEnd-of-life electric vehicle batteries in Norway: System mapping of flows, responsibilities, and circularity barriers
- Open Access
- 11 June 2026
- Published by Elsevier in Ocean Engineering
- Vol. 362
Zero-emission fast ferries: A high-level assessment of the technical feasibility of catamarans and hydrofoil vessels
- 11 June 2026
- Published by Elsevier in Ocean Engineering
- Vol. 362
Open AccessZero-emission fast ferries: A high-level assessment of the technical feasibility of catamarans and hydrofoil vessels
- Open Access
- 14 May 2026
- Published by Elsevier in Ocean & Coastal Management
- Vol. 278
Environmental impacts of zero-emission high-speed passenger vessels
- 14 May 2026
- Published by Elsevier in Ocean & Coastal Management
- Vol. 278
Open AccessEnvironmental impacts of zero-emission high-speed passenger vessels
- Open Access
- 25 April 2026
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 6 (3) , 221
Towards Sustainable Circularity? Prospective Life Cycle Assessment of Lithium-Ion Batteries with Bio-Based Materials
This prospective cradle-to-gate life cycle assessment evaluates lithium-ion battery pouch cells utilising novel bio-silica electrolytes and bio-silicon anodes and aims to integrate environmental sustainability and circularity considerations early in process development. Although the bio-silica and bio-silicon are sourced from barley husk bio-waste with minimal upstream burden, current processing routes are energy- and chemically intensive and generate substantial acid waste. Reliance on high-temperature treatments makes renewable electricity essential. Climate-change impact of cells utilising the novel materials falls from 13,200 kg CO₂-eq/kWh at lab-scale to 62 kg CO₂-eq/kWh when certain key parameters were optimised in an industrial scenario. Key levers for impact reduction include increasing active-material capacity, applying pre-lithiation, and optimising anode processing. However, even the best-case manufacturing energy demand (207 kWh/kWh cell) is around double that of conventional giga-factory production, underscoring the need for process innovation. From a circularity perspective, low material yields and high chemical intensity limit net environmental benefits, demonstrating that circular feedstocks do not inherently deliver sustainable outcomes. For developers, the results highlight the importance of more resource-efficient, higher-yield, and less energy-intensive routes to bio-silica and bio-silicon production, including feedstocks with higher silica content. For LCA practitioners, they emphasise challenges of scaling lab data and the scarcity of industrial benchmarks. Overall, bio-waste represents a potentially valuable feedstock for circular battery materials, although realising sustainable circularity depends on advances in processing efficiency and system-level optimisation.
- 25 April 2026
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 6 (3) , 221
Open AccessTowards Sustainable Circularity? Prospective Life Cycle Assessment of Lithium-Ion Batteries with Bio-Based Materials
This prospective cradle-to-gate life cycle assessment evaluates lithium-ion battery pouch cells utilising novel bio-silica electrolytes and bio-silicon anodes and aims to integrate environmental sustainability and circularity considerations early in process development. Although the bio-silica and bio-silicon are sourced from barley husk bio-waste with minimal upstream burden, current processing routes are energy- and chemically intensive and generate substantial acid waste. Reliance on high-temperature treatments makes renewable electricity essential. Climate-change impact of cells utilising the novel materials falls from 13,200 kg CO₂-eq/kWh at lab-scale to 62 kg CO₂-eq/kWh when certain key parameters were optimised in an industrial scenario. Key levers for impact reduction include increasing active-material capacity, applying pre-lithiation, and optimising anode processing. However, even the best-case manufacturing energy demand (207 kWh/kWh cell) is around double that of conventional giga-factory production, underscoring the need for process innovation. From a circularity perspective, low material yields and high chemical intensity limit net environmental benefits, demonstrating that circular feedstocks do not inherently deliver sustainable outcomes. For developers, the results highlight the importance of more resource-efficient, higher-yield, and less energy-intensive routes to bio-silica and bio-silicon production, including feedstocks with higher silica content. For LCA practitioners, they emphasise challenges of scaling lab data and the scarcity of industrial benchmarks. Overall, bio-waste represents a potentially valuable feedstock for circular battery materials, although realising sustainable circularity depends on advances in processing efficiency and system-level optimisation.
- Open Access
- 30 January 2026
- Published by Elsevier in Ocean Engineering
- Vol. 351
Feasibility assessment of zero-emission high-speed passenger vessels using optimal energy scheduling and power allocation
- 30 January 2026
- Published by Elsevier in Ocean Engineering
- Vol. 351
Open AccessFeasibility assessment of zero-emission high-speed passenger vessels using optimal energy scheduling and power allocation
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 680-686
Life Cycle Environmental Performance of Diesel, Fuel Cell, and Battery Electric Long-Haul Heavy-Duty Trucks
This study provides an environmental performance evaluation of heavy-duty 40-ton semi-trailer trucks from a life cycle perspective. The life cycle assessment (LCA) study was conducted as a hypothetical case study of semi-trailer trucks used in Norway. The life cycle impacts of diesel, fuel cell, and battery electric semi-trailer trucks are assessed in a cradle-to-grave attributional LCA study in terms of greenhouse gas (GHG) emissions as well as five other impact categories. Overall, we find that battery electric and fuel cell trucks offer GHG benefits compared to diesel trucks. However, across five other environmental impact categories, results are less clear-cut, with the diesel and battery trucks offering the lowest impact and the fuel cell truck having higher impacts. However, due to lower technological maturity and limited primary industry data available higher uncertainty exists for modelling of fuel cell systems. This should be taken into consideration in further studies. The preliminary results in this study offer environmental insights of electric powertrains and demonstrate the importance of holistic environmental impact understanding, beyond direct emissions and GHG assessment.
- 19 July 2025
- Published by Springer Nature
- p. 680-686
Open AccessLife Cycle Environmental Performance of Diesel, Fuel Cell, and Battery Electric Long-Haul Heavy-Duty Trucks
This study provides an environmental performance evaluation of heavy-duty 40-ton semi-trailer trucks from a life cycle perspective. The life cycle assessment (LCA) study was conducted as a hypothetical case study of semi-trailer trucks used in Norway. The life cycle impacts of diesel, fuel cell, and battery electric semi-trailer trucks are assessed in a cradle-to-grave attributional LCA study in terms of greenhouse gas (GHG) emissions as well as five other impact categories. Overall, we find that battery electric and fuel cell trucks offer GHG benefits compared to diesel trucks. However, across five other environmental impact categories, results are less clear-cut, with the diesel and battery trucks offering the lowest impact and the fuel cell truck having higher impacts. However, due to lower technological maturity and limited primary industry data available higher uncertainty exists for modelling of fuel cell systems. This should be taken into consideration in further studies. The preliminary results in this study offer environmental insights of electric powertrains and demonstrate the importance of holistic environmental impact understanding, beyond direct emissions and GHG assessment.
- Open Access
- 17 August 2021
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 25 (6) , 1529-1542
Estimating stocks and flows of electric passenger vehicle batteries in the Norwegian fleet from 2011 to 2030
Retired passenger battery electric vehicles (BEVs) are expected to generate significant volumes of lithium‐ion batteries (LIBs), opening business opportunities for second life and recycling. In order to evaluate these, robust estimates of the future quantity and composition of LIBs are imperative. Here, we analyzed BEV fate in the Norwegian passenger vehicle fleet and estimated the corresponding battery capacity in retired vehicles from 2011 to 2030, using a stock‐flow vehicle cohort model linked to analysis of the battery types and sizes contained in different BEVs. Results based on this combination of modeled and highly disaggregated technical data show that (i) the LIB energy capacity available for second use or recycling from end‐of‐life vehicles is expected to reach 0.6 GWh in 2025 and 2.1 GWh in 2030 (not accounting for any losses); (ii) most LIBs are currently contained within the weight segment 1500–1599 kg followed by 2000+ kg; (iii) highest sales currently exist for BEVs containing lithium nickel manganese cobalt oxide (NMC) batteries; and (iv) lithium nickel cobalt aluminum oxide batteries initially constitute the largest overall capacity in retired vehicles, but will later be surpassed by NMCs. The results demonstrate rapidly growing opportunities for businesses to make use of retired batteries and a necessity to adapt to changing battery types and sizes.
- 17 August 2021
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 25 (6) , 1529-1542
Open AccessEstimating stocks and flows of electric passenger vehicle batteries in the Norwegian fleet from 2011 to 2030
Retired passenger battery electric vehicles (BEVs) are expected to generate significant volumes of lithium‐ion batteries (LIBs), opening business opportunities for second life and recycling. In order to evaluate these, robust estimates of the future quantity and composition of LIBs are imperative. Here, we analyzed BEV fate in the Norwegian passenger vehicle fleet and estimated the corresponding battery capacity in retired vehicles from 2011 to 2030, using a stock‐flow vehicle cohort model linked to analysis of the battery types and sizes contained in different BEVs. Results based on this combination of modeled and highly disaggregated technical data show that (i) the LIB energy capacity available for second use or recycling from end‐of‐life vehicles is expected to reach 0.6 GWh in 2025 and 2.1 GWh in 2030 (not accounting for any losses); (ii) most LIBs are currently contained within the weight segment 1500–1599 kg followed by 2000+ kg; (iii) highest sales currently exist for BEVs containing lithium nickel manganese cobalt oxide (NMC) batteries; and (iv) lithium nickel cobalt aluminum oxide batteries initially constitute the largest overall capacity in retired vehicles, but will later be surpassed by NMCs. The results demonstrate rapidly growing opportunities for businesses to make use of retired batteries and a necessity to adapt to changing battery types and sizes.
- Open Access
- 1 June 2020
- Published by Elsevier in Science of The Total Environment
- Vol. 720, 137577
Costs and benefits of implementing an Environmental Speed Limit in a Nordic city
- 1 June 2020
- Published by Elsevier in Science of The Total Environment
- Vol. 720, 137577
Open AccessCosts and benefits of implementing an Environmental Speed Limit in a Nordic city
- 1 January 2020
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 92
Technical and environmental viability of a European CO2 EOR system
- 1 January 2020
- Published by Elsevier in International Journal of Greenhouse Gas Control
- Vol. 92
Technical and environmental viability of a European CO2 EOR system
- Open Access
- 22 December 2019
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 11 (1) , 5
Experiences from Battery-Electric Truck Users in Norway
This paper presents experiences from pilot-projects with battery-electric trucks in Norway, focusing on purchasing processes, technology, vehicle choices, user experience and various performance aspects. Furthermore, we discuss the electrification potential for battery-electric trucks and compare their total costs of ownership and associated socio-economic costs with internal combustion engine (ICE) trucks for a range of technological maturity scenarios. The results show that experiences have generally been positive but tailoring of use patterns is often required. Furthermore, at their current maturity level, battery-electric trucks could, to some extent, replace typical use of Norwegian ICE trucks, depending on the situation. In terms of costs, we expect that battery-electric light distribution trucks will first become competitive with ICE trucks when technology reaches mass production.
- 22 December 2019
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 11 (1) , 5
Open AccessExperiences from Battery-Electric Truck Users in Norway
This paper presents experiences from pilot-projects with battery-electric trucks in Norway, focusing on purchasing processes, technology, vehicle choices, user experience and various performance aspects. Furthermore, we discuss the electrification potential for battery-electric trucks and compare their total costs of ownership and associated socio-economic costs with internal combustion engine (ICE) trucks for a range of technological maturity scenarios. The results show that experiences have generally been positive but tailoring of use patterns is often required. Furthermore, at their current maturity level, battery-electric trucks could, to some extent, replace typical use of Norwegian ICE trucks, depending on the situation. In terms of costs, we expect that battery-electric light distribution trucks will first become competitive with ICE trucks when technology reaches mass production.