Florian Kummer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Florian Kummer has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Martin Oberlack
Technical University of Darmstadt
8 shared publications - Matthias Rieckmann
Institute for Fluid Dynamics, Technical University Darmstadt
7 shared publications - Chen Miao
Institute for Fluid Dynamics, Technical University Darmstadt
5 shared publications - Teoman Toprak
Chair of Fluid Dynamics TU Darmstadt Otto-Berndt-Str. 2 D-64287 Germany
4 shared publications - Irina Shishkina
Chair of Fluid Dynamics, Technical University of Darmstadt, Darmstadt, Germany
3 shared publications - Martin Smuda
Institute for Fluid Dynamics, Technical University Darmstadt
3 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by Springer Nature
- p. 293-309
High-Order Discontinuous Galerkin Methods for Direct Numerical Simulation of Wetting
- 1 August 2026
- Published by Springer Nature
- p. 293-309
Open AccessHigh-Order Discontinuous Galerkin Methods for Direct Numerical Simulation of Wetting
- Open Access
- 27 July 2026
- Published by Springer Nature in The European Physical Journal E
- Vol. 49 (8) , 66
A novel numerical method for simulating a droplet in a Leidenfrost state on soft substrates
This work presents a numerical framework for three-phase systems (liquid, gas, visco-elastic solid) using an extended discontinuous Galerkin (XDG) and level-set method. It simulates complex fluid–structure interactions with heat and mass transfer, maintaining strictly sharp phase interfaces without artificial smoothing. After verifying optimal convergence via a fluid–solid Taylor–Couette benchmark, the framework is applied to the Leidenfrost effect. While existing studies typically assume rigid solid surfaces, we investigate deformations induced by localized vapor pressure on soft substrates. We validate quasi-static droplet shapes against existing rigid solid models and derive a novel analytical extension for soft substrates using a Winkler foundation model. Our simulations demonstrate excellent agreement with this new analytical solution. Finally, the framework’s robustness is demonstrated by simulating a Leidenfrost droplet sliding down an inclined soft substrate, successfully capturing asymmetric droplet shape, substrate deformation and localized interfacial waves.
- 27 July 2026
- Published by Springer Nature in The European Physical Journal E
- Vol. 49 (8) , 66
Open AccessA novel numerical method for simulating a droplet in a Leidenfrost state on soft substrates
This work presents a numerical framework for three-phase systems (liquid, gas, visco-elastic solid) using an extended discontinuous Galerkin (XDG) and level-set method. It simulates complex fluid–structure interactions with heat and mass transfer, maintaining strictly sharp phase interfaces without artificial smoothing. After verifying optimal convergence via a fluid–solid Taylor–Couette benchmark, the framework is applied to the Leidenfrost effect. While existing studies typically assume rigid solid surfaces, we investigate deformations induced by localized vapor pressure on soft substrates. We validate quasi-static droplet shapes against existing rigid solid models and derive a novel analytical extension for soft substrates using a Winkler foundation model. Our simulations demonstrate excellent agreement with this new analytical solution. Finally, the framework’s robustness is demonstrated by simulating a Leidenfrost droplet sliding down an inclined soft substrate, successfully capturing asymmetric droplet shape, substrate deformation and localized interfacial waves.
- Open Access
- 8 June 2026
- Published by Springer Nature in Archives of Computational Methods in Engineering
- p. 1-46
Comparative Study of Different Quadrature Methods for Cut Elements
The quadrature of cut elements is crucial for all Finite Element Methods that do not apply boundary-fitted meshes. It should be efficient, accurate, and robust. Various approaches balancing these requirements have been published, with some available as open-source implementations. This work reviews these open-source codes and the methods used. Furthermore, benchmarking examples are developed for 2D and 3D geometries. Implicit and explicit boundary descriptions are available for all models. The different examples test the efficiency, accuracy, versatility, and robustness of the codes. Special focus is set on the influence of the input parameter, which controls the desired quadrature order, on the actual integration error. A detailed comparison of the discussed codes is carried out. The systematic benchmarking allows a conclusive comparison and presents a valuable tool for future code development. All tests are published in an accompanying open-source repository.
- 8 June 2026
- Published by Springer Nature in Archives of Computational Methods in Engineering
- p. 1-46
Open AccessComparative Study of Different Quadrature Methods for Cut Elements
The quadrature of cut elements is crucial for all Finite Element Methods that do not apply boundary-fitted meshes. It should be efficient, accurate, and robust. Various approaches balancing these requirements have been published, with some available as open-source implementations. This work reviews these open-source codes and the methods used. Furthermore, benchmarking examples are developed for 2D and 3D geometries. Implicit and explicit boundary descriptions are available for all models. The different examples test the efficiency, accuracy, versatility, and robustness of the codes. Special focus is set on the influence of the input parameter, which controls the desired quadrature order, on the actual integration error. A detailed comparison of the discussed codes is carried out. The systematic benchmarking allows a conclusive comparison and presents a valuable tool for future code development. All tests are published in an accompanying open-source repository.
- 1 May 2026
- Published by Springer Nature
- p. 177-193
High Order Simulation for Fluid-Structure Interaction in the Euler-Euler Framework
- 1 May 2026
- Published by Springer Nature
- p. 177-193
High Order Simulation for Fluid-Structure Interaction in the Euler-Euler Framework
- Open Access
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 11 (3)
Modal coupling of nonlinear inviscid axisymmetric droplet shape oscillations
We investigate the nonlinear axisymmetric shape oscillations of inviscid droplets, focusing on the modal coupling between different oscillation modes. The research builds upon the geometrically exact nonlinear theory for droplet shape oscillations by Plümacher [], which allows for large deformations and superimposed initial deformations. The theory rests on the potential flow assumption and the usual momentum jump condition at the droplet surface including the surface tension. Using the unified transform method of A. S. Fokas [], the governing equations are transformed into a system of integrodifferential equations defined on a unit sphere. These equations are then solved numerically with a Galerkin method that uses spherical harmonics and exhibits overall spectral convergence. The frequency shift and the extended time spent in the prolate state within an oscillation period are analyzed for different initial deformation modes and show good agreement with existing literature. The results demonstrate that for large initial deformations, the modal coupling significantly influences the oscillation dynamics, particularly in the interaction between even and odd modes. To study modal coupling in detail, superimposed initial deformations are investigated in which a large-amplitude even mode is superimposed with various individual small-amplitude odd modes. It is shown that the initially excited large-amplitude even mode remains nearly unaffected by the superimposed small-amplitude odd modes. The initially superimposed small-amplitude odd mode, however, is altered by the large-amplitude even mode without being significantly amplified or damped. This nonlinear modal coupling is not present in single even initial deformation modes, where it is shown that an even initial deformation mode cannot excite odd modes.
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 11 (3)
Open AccessModal coupling of nonlinear inviscid axisymmetric droplet shape oscillations
We investigate the nonlinear axisymmetric shape oscillations of inviscid droplets, focusing on the modal coupling between different oscillation modes. The research builds upon the geometrically exact nonlinear theory for droplet shape oscillations by Plümacher [], which allows for large deformations and superimposed initial deformations. The theory rests on the potential flow assumption and the usual momentum jump condition at the droplet surface including the surface tension. Using the unified transform method of A. S. Fokas [], the governing equations are transformed into a system of integrodifferential equations defined on a unit sphere. These equations are then solved numerically with a Galerkin method that uses spherical harmonics and exhibits overall spectral convergence. The frequency shift and the extended time spent in the prolate state within an oscillation period are analyzed for different initial deformation modes and show good agreement with existing literature. The results demonstrate that for large initial deformations, the modal coupling significantly influences the oscillation dynamics, particularly in the interaction between even and odd modes. To study modal coupling in detail, superimposed initial deformations are investigated in which a large-amplitude even mode is superimposed with various individual small-amplitude odd modes. It is shown that the initially excited large-amplitude even mode remains nearly unaffected by the superimposed small-amplitude odd modes. The initially superimposed small-amplitude odd mode, however, is altered by the large-amplitude even mode without being significantly amplified or damped. This nonlinear modal coupling is not present in single even initial deformation modes, where it is shown that an even initial deformation mode cannot excite odd modes.
- Open Access
Comparative study of different quadrature methods for cut elements
The quadrature of cut elements is crucial for all Finite Element Methods that do not apply boundary-fitted meshes. It should be efficient, accurate, and robust. Various approaches balancing these requirements have been published, with some available as open-source implementations. This work reviews these open-sources codes and the methods used. Furthermore, benchmarking examples are developed for 2D and 3D geometries. Implicit and explicit boundary descriptions are available for all models. The different examples test the efficiency, accuracy, versatility, and robustness of the codes. Special focus is set on the influence of the input parameter, which controls the desired quadrature order, on the actual integration error. A detailed comparison of the discussed codes is carried out. The benchmarking allows a conclusive comparison and presents a valuable tool for future code development. All tests are published in an accompanying open-source repository.
Open AccessComparative study of different quadrature methods for cut elements
The quadrature of cut elements is crucial for all Finite Element Methods that do not apply boundary-fitted meshes. It should be efficient, accurate, and robust. Various approaches balancing these requirements have been published, with some available as open-source implementations. This work reviews these open-sources codes and the methods used. Furthermore, benchmarking examples are developed for 2D and 3D geometries. Implicit and explicit boundary descriptions are available for all models. The different examples test the efficiency, accuracy, versatility, and robustness of the codes. Special focus is set on the influence of the input parameter, which controls the desired quadrature order, on the actual integration error. A detailed comparison of the discussed codes is carried out. The benchmarking allows a conclusive comparison and presents a valuable tool for future code development. All tests are published in an accompanying open-source repository.
- Open Access
- 5 August 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 235 (2) , 363-378
Numerical investigation of model incompatibilities in contact line evaporation
In the sharp-interface modeling of three phase contact lines special care has to be taken with respect to boundary and interface conditions, to avoid singularities. In this work, one such singularity, arising from an incompatibility in a standard model for evaporation/condensation at the contact line, is investigated numerically. By means of employing an extended Discontinuous Galerkin method, established in preliminary works, we study the severity of the singularity in the model. In a first step, the experimental order of convergence is determined in absence of evaporation/condensation and thus without the incompatibility under investigation. The extent of the incompatibility is then measured by computing the convergence orders again, repeating the same simulation with evaporation/condensation present. As one possible model alteration to dispose of the incompatibility causing the singularity and to assess the properties of the numerical method we propose the introduction of a slip condition on the fluid–fluid interface. This part of the study is complemented by an examination of the experimental order of convergence for the test case using the model without and with slip on the interface.
- 5 August 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 235 (2) , 363-378
Open AccessNumerical investigation of model incompatibilities in contact line evaporation
In the sharp-interface modeling of three phase contact lines special care has to be taken with respect to boundary and interface conditions, to avoid singularities. In this work, one such singularity, arising from an incompatibility in a standard model for evaporation/condensation at the contact line, is investigated numerically. By means of employing an extended Discontinuous Galerkin method, established in preliminary works, we study the severity of the singularity in the model. In a first step, the experimental order of convergence is determined in absence of evaporation/condensation and thus without the incompatibility under investigation. The extent of the incompatibility is then measured by computing the convergence orders again, repeating the same simulation with evaporation/condensation present. As one possible model alteration to dispose of the incompatibility causing the singularity and to assess the properties of the numerical method we propose the introduction of a slip condition on the fluid–fluid interface. This part of the study is complemented by an examination of the experimental order of convergence for the test case using the model without and with slip on the interface.
- Open Access
- 8 May 2025
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 126 (9)
Cell Agglomeration Strategy for Cut Cells in eXtended Discontinuous Galerkin Methods
In this work, a cell agglomeration strategy for the cut cells arising in the eXtended discontinuous Galerkin (XDG) method is presented. Cut cells are a fundamental aspect of unfitted mesh approaches, where complex geometries or interfaces separating subdomains are embedded into structured background grids to facilitate the mesh generation process. In such methods, arbitrary small cells occur due to the intersections of background cells with embedded geometries and lead to discretization difficulties due to their diminutive sizes. Furthermore, temporal evolutions of these geometries may lead to topological changes across different time steps. Both of these issues, that is, small‐cut cells and topological changes, can be addressed with a cell agglomeration technique, independent of discretization. However, cell agglomeration encounters significant difficulties in three dimensions due to the complexity of neighborship and issues like cycles and parallel agglomeration chains. The proposed strategy introduces a robust framework that mitigates these problems by incorporating methods for cycle prevention, chain agglomeration, and parallelization. Implemented in the open‐source software package BoSSS, this strategy has been successfully tested on multiprocessor systems using dynamic multiphase test cases in both two and three dimensions, enabling simulations that were previously infeasible.
- 8 May 2025
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 126 (9)
Open AccessCell Agglomeration Strategy for Cut Cells in eXtended Discontinuous Galerkin Methods
In this work, a cell agglomeration strategy for the cut cells arising in the eXtended discontinuous Galerkin (XDG) method is presented. Cut cells are a fundamental aspect of unfitted mesh approaches, where complex geometries or interfaces separating subdomains are embedded into structured background grids to facilitate the mesh generation process. In such methods, arbitrary small cells occur due to the intersections of background cells with embedded geometries and lead to discretization difficulties due to their diminutive sizes. Furthermore, temporal evolutions of these geometries may lead to topological changes across different time steps. Both of these issues, that is, small‐cut cells and topological changes, can be addressed with a cell agglomeration technique, independent of discretization. However, cell agglomeration encounters significant difficulties in three dimensions due to the complexity of neighborship and issues like cycles and parallel agglomeration chains. The proposed strategy introduces a robust framework that mitigates these problems by incorporating methods for cycle prevention, chain agglomeration, and parallelization. Implemented in the open‐source software package BoSSS, this strategy has been successfully tested on multiprocessor systems using dynamic multiphase test cases in both two and three dimensions, enabling simulations that were previously infeasible.
- Open Access
Wetting simulation of the porous structure of a heat pipe using an eXtended Discontinuous Galerkin Method and a Parameterized Level-Set
We perform high-order simulations of two-phase flows in capillaries, with and without evaporation. Since a sharp-interface model is used, singularities can arise at the three-phase contact line, where the fluid-fluid interface interacts with the capillary wall. These singularities are especially challenging when a highly accurate, high-order method with very little numerical diffusion is used for the flow solver. In this work, we employ the eXtended Discontinuous Galerkin (XDG) method, which has a very high accuracy but a severe limit regarding e.g., the time-step restriction. To address this challenge and enhance the stability of our numerical method we introduce a novel approach for representing a moving interface in the case of two-phase flows. We propose a global analytical representation of the interface-describing level-set field, defined by a small set of time-dependent parameters. Noteworthy for its simplicity and efficiency, this method effectively addresses the inherent complexity of two-phase flow problems. Furthermore, it significantly improves numerical stability and enables the use of larger time steps, ensuring both reliability and computational efficiency in our simulations. We compare different analytic expressions for level-set representation, including the elliptic function and the fourth-order polynomial, and validate the method against established literature data for capillary rise, both with and without evaporation. These results highlight the effectiveness of our approach in resolving complex interfacial dynamics.
Open AccessWetting simulation of the porous structure of a heat pipe using an eXtended Discontinuous Galerkin Method and a Parameterized Level-Set
We perform high-order simulations of two-phase flows in capillaries, with and without evaporation. Since a sharp-interface model is used, singularities can arise at the three-phase contact line, where the fluid-fluid interface interacts with the capillary wall. These singularities are especially challenging when a highly accurate, high-order method with very little numerical diffusion is used for the flow solver. In this work, we employ the eXtended Discontinuous Galerkin (XDG) method, which has a very high accuracy but a severe limit regarding e.g., the time-step restriction. To address this challenge and enhance the stability of our numerical method we introduce a novel approach for representing a moving interface in the case of two-phase flows. We propose a global analytical representation of the interface-describing level-set field, defined by a small set of time-dependent parameters. Noteworthy for its simplicity and efficiency, this method effectively addresses the inherent complexity of two-phase flow problems. Furthermore, it significantly improves numerical stability and enables the use of larger time steps, ensuring both reliability and computational efficiency in our simulations. We compare different analytic expressions for level-set representation, including the elliptic function and the fourth-order polynomial, and validate the method against established literature data for capillary rise, both with and without evaporation. These results highlight the effectiveness of our approach in resolving complex interfacial dynamics.