Joseph P. Colgan
Research Subjects
Joseph P. Colgan has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- David A. John
Interior U.S. Geological
13 shared publications Christopher D. Henry
Interior U.S. Geological
11 shared publications- Samuel A. Johnstone
U.S. Geological Survey Geosciences and Environmental Change Denver CO USA
6 shared publications - Edward A. du Bray
Geological Survey.) Interior U.S. Geological Survey
4 shared publications Elizabeth L. Miller
Stanford University
4 shared publicationsJoseph L. Wooden
Department of Geological and Environmental Sciences; Stanford University; Stanford; California; USA
3 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by US Geological Survey
A synthesis engine for constructing geologic maps of the United States
The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.
- 1 January 2025
- Published by US Geological Survey
Open AccessA synthesis engine for constructing geologic maps of the United States
The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.
- Open Access
- 1 January 2024
- Published by US Geological Survey
Geologic map of the southern Stillwater Range, Nevada
The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km3]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.
- 1 January 2024
- Published by US Geological Survey
Open AccessGeologic map of the southern Stillwater Range, Nevada
The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km3]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.
- Open Access
- 1 January 2022
- Published by US Geological Survey
The National Cooperative Geologic Mapping Program’s U.S. GeoFramework Initiative — Delivering a digital database of geologic map information by 2030
First posted December 14, 2022 Director, Geosciences and Environmental Change Science Center U.S. Geological Survey Box 25046, MS-980 Denver, CO 80225-0046 The U.S. Geological Survey's National Cooperative Geologic Mapping Program's U.S. GeoFramework Initiative responds to Congressional direction to implement the National Geologic Map Database Phase Three. The U.S. GeoFramework Initiative aims to create and deliver a new digital geologic framework of the United States by 2030. This Fact Sheet outlines the collaborations needed and plans taken to achieve that goal.
- 1 January 2022
- Published by US Geological Survey
Open AccessThe National Cooperative Geologic Mapping Program’s U.S. GeoFramework Initiative — Delivering a digital database of geologic map information by 2030
First posted December 14, 2022 Director, Geosciences and Environmental Change Science Center U.S. Geological Survey Box 25046, MS-980 Denver, CO 80225-0046 The U.S. Geological Survey's National Cooperative Geologic Mapping Program's U.S. GeoFramework Initiative responds to Congressional direction to implement the National Geologic Map Database Phase Three. The U.S. GeoFramework Initiative aims to create and deliver a new digital geologic framework of the United States by 2030. This Fact Sheet outlines the collaborations needed and plans taken to achieve that goal.
- Open Access
- 1 January 2022
- Published by US Geological Survey
The Seamless Integrated Geologic Mapping (SIGMa) extension to the Geologic Map Schema (GeMS)
Geologic maps are the fundamental building blocks of surface and subsurface three-dimensional geologic framework models of the Earth’s crust. However, as the production and availability of geologic map databases continues to increase, inconsistent data models and the lack of synthesized, national geologic map data at scales appropriate for informed decision making negatively affect the functional integration of geologic map data with other national datasets. The Geologic Map Schema (GeMS) is the publication and archive database standard for geologic map data funded by the U.S. Geological Survey National Cooperative Geologic Mapping Program, and standardizes the organization and content of a single map database. However, synthesizing multiple databases into a seamless geologic map database creates a different set of challenges and database needs than GeMS was designed to accommodate. The Seamless Integrated Geologic Mapping (SIGMa) extension is designed to expand the capabilities of GeMS by enabling integration of map-based geoscience data. In particular, the SIGMa extension enables capturing a diverse and ever-changing set of map units, produced by many contributors operating independently, and by incremental and noncontiguous assembly and publication. Feature-level metadata fields allow data sources and digital compilation methods to be attributed separately and a relational structure is designed to support the link between data sources and features attributed with multiple data sources. Instead of paragraph-style map-unit descriptions that can be highly inconsistent, SIGMa parses fundamental map-unit attributes, including material, genetic process, and age, into thematically specific fields. The SIGMa extension uses a hierarchical map-unit organization to facilitate a dynamic and evolving, formation-level stratigraphic framework. The hierarchy is developed around geologic provinces that represent temporally restricted geologic events, processes, and settings. Geologic provinces can include magmatic events, depositional settings associated with tectonic processes or stable continental margins, and processes that are actively shaping the modern landscape. A geologic province hierarchy places map units into a geologic context at subregional to continental scales and provides the flexibility to support incremental assembly of the stratigraphy.
- 1 January 2022
- Published by US Geological Survey
Open AccessThe Seamless Integrated Geologic Mapping (SIGMa) extension to the Geologic Map Schema (GeMS)
Geologic maps are the fundamental building blocks of surface and subsurface three-dimensional geologic framework models of the Earth’s crust. However, as the production and availability of geologic map databases continues to increase, inconsistent data models and the lack of synthesized, national geologic map data at scales appropriate for informed decision making negatively affect the functional integration of geologic map data with other national datasets. The Geologic Map Schema (GeMS) is the publication and archive database standard for geologic map data funded by the U.S. Geological Survey National Cooperative Geologic Mapping Program, and standardizes the organization and content of a single map database. However, synthesizing multiple databases into a seamless geologic map database creates a different set of challenges and database needs than GeMS was designed to accommodate. The Seamless Integrated Geologic Mapping (SIGMa) extension is designed to expand the capabilities of GeMS by enabling integration of map-based geoscience data. In particular, the SIGMa extension enables capturing a diverse and ever-changing set of map units, produced by many contributors operating independently, and by incremental and noncontiguous assembly and publication. Feature-level metadata fields allow data sources and digital compilation methods to be attributed separately and a relational structure is designed to support the link between data sources and features attributed with multiple data sources. Instead of paragraph-style map-unit descriptions that can be highly inconsistent, SIGMa parses fundamental map-unit attributes, including material, genetic process, and age, into thematically specific fields. The SIGMa extension uses a hierarchical map-unit organization to facilitate a dynamic and evolving, formation-level stratigraphic framework. The hierarchy is developed around geologic provinces that represent temporally restricted geologic events, processes, and settings. Geologic provinces can include magmatic events, depositional settings associated with tectonic processes or stable continental margins, and processes that are actively shaping the modern landscape. A geologic province hierarchy places map units into a geologic context at subregional to continental scales and provides the flexibility to support incremental assembly of the stratigraphy.
- 1 September 2021
- Published by Elsevier in Earth-Science Reviews
- Vol. 220, 103734
Detrital zircon record of magmatism and sediment dispersal across the North American Cordilleran arc system (28–48°N)
- 1 September 2021
- Published by Elsevier in Earth-Science Reviews
- Vol. 220, 103734
Detrital zircon record of magmatism and sediment dispersal across the North American Cordilleran arc system (28–48°N)
- Open Access
- 21 March 2020
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 39 (3)
Timing of Cenozoic Extension in the Southern Stillwater Range and Dixie Valley, Nevada
The Dixie Valley fault bounds the east side of the Stillwater Range in west‐central Nevada and last ruptured in 1954. Offset basalts indicate that slip began more recently than ~14 Ma, and prior work has interpreted the southern segment as an active low‐angle normal fault. Oligocene igneous rocks in the southern Stillwater Range were steeply tilted during large‐magnitude extension prior to ~14 Ma. To refine the timing of early extension and the onset of slip on the Dixie Valley fault, we collected two transects of samples for apatite fission track, apatite and zircon (U‐Th)/He (AHe and ZHe), and apatite 4He/3He thermochronometry. Apatite fission track ages from the Oligocene IXL pluton indicate rapid cooling ~18–14 Ma, and AHe and ZHe ages from the Cretaceous La Plata Canyon pluton indicate rapid cooling ~16–19 Ma. We interpret these data to record cooling during rapid extension. AHe ages from the IXL pluton are ~6–8 Ma and record cooling during slip on the Dixie Valley fault. We modeled these ages and 4He/3He spectra from one sample as the result of cooling during exhumation of a tilted fault block at a constant extension rate. The model predicts slip on the Dixie Valley fault beginning ~8 Ma. Although it does not constrain the initial fault dip, the model illustrates how a low‐angle fault requires a higher extension rate to reproduce cooling ages. Consequently, we prefer a high‐angle southern Dixie Valley fault for strain compatibility with the high‐angle northern segment.
- 21 March 2020
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 39 (3)
Open AccessTiming of Cenozoic Extension in the Southern Stillwater Range and Dixie Valley, Nevada
The Dixie Valley fault bounds the east side of the Stillwater Range in west‐central Nevada and last ruptured in 1954. Offset basalts indicate that slip began more recently than ~14 Ma, and prior work has interpreted the southern segment as an active low‐angle normal fault. Oligocene igneous rocks in the southern Stillwater Range were steeply tilted during large‐magnitude extension prior to ~14 Ma. To refine the timing of early extension and the onset of slip on the Dixie Valley fault, we collected two transects of samples for apatite fission track, apatite and zircon (U‐Th)/He (AHe and ZHe), and apatite 4He/3He thermochronometry. Apatite fission track ages from the Oligocene IXL pluton indicate rapid cooling ~18–14 Ma, and AHe and ZHe ages from the Cretaceous La Plata Canyon pluton indicate rapid cooling ~16–19 Ma. We interpret these data to record cooling during rapid extension. AHe ages from the IXL pluton are ~6–8 Ma and record cooling during slip on the Dixie Valley fault. We modeled these ages and 4He/3He spectra from one sample as the result of cooling during exhumation of a tilted fault block at a constant extension rate. The model predicts slip on the Dixie Valley fault beginning ~8 Ma. Although it does not constrain the initial fault dip, the model illustrates how a low‐angle fault requires a higher extension rate to reproduce cooling ages. Consequently, we prefer a high‐angle southern Dixie Valley fault for strain compatibility with the high‐angle northern segment.
- 1 January 2019
- Published by US Geological Survey
Petrology of volcanic rocks associated with silver-gold (Ag-Au) epithermal deposits in the Tonopah, Divide, and Goldfield Mining Districts, Nevada
Miocene calc-alkaline volcanic rocks, part of the southern segment of the ancestral Cascades magmatic arc, are spatially, temporally, and likely genetically associated with precious metal epithermal deposits in the Tonopah, Divide, and Goldfield Districts of west-central Nevada. In the Tonopah mining district, volcanic rocks include the Mizpah Trachyte, Fraction Tuff, and Oddie Rhyolite; in the Divide mining district, they include the Heller Tuff, Brougher Rhyolite, trachyandesite of Red Mountain, Divide Andesite, and volcanics of Donovan Peak (which includes rhyolite, dacite, and rhyodacite units); in the Goldfield mining district they include the Milltown Andesite, an unnamed porphyritic andesite, and latite. All these rocks are porphyritic and contain phenocryst assemblages that include plagioclase, pyroxene, hornblende, biotite, quartz, alkali feldspar, and olivine. These mostly subalkaline, metaluminous, calc-alkalic, and magnesian rocks range from basaltic trachyandesite to rhyolite and contain 54 to 78 weight percent silicon dioxide.In the Divide mining district, the Divide Andesite and the volcanics of Donovan Peak are compositionally distinct from volcanic rocks in the other two mining districts. These rocks define a somewhat more restricted range of silicon dioxide content; are more alkalic; have greater titanium dioxide, sodium oxide, barium, hafnium, lanthanum, niobium, tantalum, yttrium, ytterbium, and zirconium abundances; and lower magnesium oxide, strontium, and vanadium abundances. Elevated zirconium contents are particularly characteristic of these rocks, which are also distinctly younger than most of the rocks in the other two mining districts. The alkalic character (principally higher sodium oxide abundances) and elevated zirconium contents characteristic of the Divide Andesite and the volcanics of Donovan Peak suggest that distinctive sources and (or) processes contributed to the petrogenesis of these rocks.In the Tonopah, Divide, and Goldfield mining districts the geochemistry of Oligocene and Miocene volcanic rocks constrain the processes that contributed to the petrogenesis of these rocks. Specifically, major oxide compositional variation among these rocks is consistent with crystallization and fractionation of the observed phenocryst minerals. In addition, these rocks have negatively sloping rare-earth element patterns consistent with partial melting in a high-pressure, garnet stable regime. Elevated strontium concentrations and small negative europium anomalies are consistent with partial melting in a plagioclase-unstable setting. However, larger negative europium anomalies among the more silica-rich volcanic rocks indicates a progressively greater role for plagioclase fractionation among these rocks. The importance of hornblende in the petrogenesis of these rocks is reflected in subtly U-shaped middle rare-earth element pattern segments. Increasing lead/cerium and decreasing phosphorus pentoxide/potassium oxide with increasing silicon dioxide are characteristic of these volcanic rocks. These characteristics and their distinctive pre-Cenozoic xenolith content suggest a significant role for crustal contamination in their petrogenesis. Diagnostic textural features preserved by phenocrysts, especially plagioclase, constitute additional evidence that open-system behavior, including reservoir-scale mixing, recharge, and assimilation, was critical to the petrogenesis of volcanic rocks in the Tonopah, Divide, and Goldfield mining districts.
- 1 January 2019
- Published by US Geological Survey
Petrology of volcanic rocks associated with silver-gold (Ag-Au) epithermal deposits in the Tonopah, Divide, and Goldfield Mining Districts, Nevada
Miocene calc-alkaline volcanic rocks, part of the southern segment of the ancestral Cascades magmatic arc, are spatially, temporally, and likely genetically associated with precious metal epithermal deposits in the Tonopah, Divide, and Goldfield Districts of west-central Nevada. In the Tonopah mining district, volcanic rocks include the Mizpah Trachyte, Fraction Tuff, and Oddie Rhyolite; in the Divide mining district, they include the Heller Tuff, Brougher Rhyolite, trachyandesite of Red Mountain, Divide Andesite, and volcanics of Donovan Peak (which includes rhyolite, dacite, and rhyodacite units); in the Goldfield mining district they include the Milltown Andesite, an unnamed porphyritic andesite, and latite. All these rocks are porphyritic and contain phenocryst assemblages that include plagioclase, pyroxene, hornblende, biotite, quartz, alkali feldspar, and olivine. These mostly subalkaline, metaluminous, calc-alkalic, and magnesian rocks range from basaltic trachyandesite to rhyolite and contain 54 to 78 weight percent silicon dioxide.In the Divide mining district, the Divide Andesite and the volcanics of Donovan Peak are compositionally distinct from volcanic rocks in the other two mining districts. These rocks define a somewhat more restricted range of silicon dioxide content; are more alkalic; have greater titanium dioxide, sodium oxide, barium, hafnium, lanthanum, niobium, tantalum, yttrium, ytterbium, and zirconium abundances; and lower magnesium oxide, strontium, and vanadium abundances. Elevated zirconium contents are particularly characteristic of these rocks, which are also distinctly younger than most of the rocks in the other two mining districts. The alkalic character (principally higher sodium oxide abundances) and elevated zirconium contents characteristic of the Divide Andesite and the volcanics of Donovan Peak suggest that distinctive sources and (or) processes contributed to the petrogenesis of these rocks.In the Tonopah, Divide, and Goldfield mining districts the geochemistry of Oligocene and Miocene volcanic rocks constrain the processes that contributed to the petrogenesis of these rocks. Specifically, major oxide compositional variation among these rocks is consistent with crystallization and fractionation of the observed phenocryst minerals. In addition, these rocks have negatively sloping rare-earth element patterns consistent with partial melting in a high-pressure, garnet stable regime. Elevated strontium concentrations and small negative europium anomalies are consistent with partial melting in a plagioclase-unstable setting. However, larger negative europium anomalies among the more silica-rich volcanic rocks indicates a progressively greater role for plagioclase fractionation among these rocks. The importance of hornblende in the petrogenesis of these rocks is reflected in subtly U-shaped middle rare-earth element pattern segments. Increasing lead/cerium and decreasing phosphorus pentoxide/potassium oxide with increasing silicon dioxide are characteristic of these volcanic rocks. These characteristics and their distinctive pre-Cenozoic xenolith content suggest a significant role for crustal contamination in their petrogenesis. Diagnostic textural features preserved by phenocrysts, especially plagioclase, constitute additional evidence that open-system behavior, including reservoir-scale mixing, recharge, and assimilation, was critical to the petrogenesis of volcanic rocks in the Tonopah, Divide, and Goldfield mining districts.
- 1 January 2019
- Published by US Geological Survey
Petrographic, geochemical, and geochronologic data for cenozoic volcanic rocks of the Tonopah, Divide, and Goldfield Mining Districts, Nevada
The purpose of this report is to summarize geochemical, petrographic, and geochronologic data for samples, principally those of unmineralized Tertiary volcanic rocks, from the Tonopah, Divide, and Goldfield mining districts of west-central Nevada (fig. 1). Much of the data presented here for the Tonopah and Divide districts are for samples collected by Bonham and Garside (1979) during geologic mapping in and around those districts, whereas much of that for samples from the Goldfield district were obtained by Ashley (1974; 1979; 1990a). Additional data were derived from samples collected between 2012–2015, as part of the Mineral Resources Program funded project titled: “Magmatic-tectonic history and component sources of major precious metal deposits in the southern Walker Lane”. A small amount of additional geochemical data for samples from each of the districts were compiled from other sources. Individual sample collectors are identified by appropriate entries in the “Collector” field (appendix 1) and published sources of geochemical data are defined by entries in the “Chem_Src” data field (appendix 1).
- 1 January 2019
- Published by US Geological Survey
Petrographic, geochemical, and geochronologic data for cenozoic volcanic rocks of the Tonopah, Divide, and Goldfield Mining Districts, Nevada
The purpose of this report is to summarize geochemical, petrographic, and geochronologic data for samples, principally those of unmineralized Tertiary volcanic rocks, from the Tonopah, Divide, and Goldfield mining districts of west-central Nevada (fig. 1). Much of the data presented here for the Tonopah and Divide districts are for samples collected by Bonham and Garside (1979) during geologic mapping in and around those districts, whereas much of that for samples from the Goldfield district were obtained by Ashley (1974; 1979; 1990a). Additional data were derived from samples collected between 2012–2015, as part of the Mineral Resources Program funded project titled: “Magmatic-tectonic history and component sources of major precious metal deposits in the southern Walker Lane”. A small amount of additional geochemical data for samples from each of the districts were compiled from other sources. Individual sample collectors are identified by appropriate entries in the “Collector” field (appendix 1) and published sources of geochemical data are defined by entries in the “Chem_Src” data field (appendix 1).
- Open Access
- 15 October 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (10) , 3647-3667
Interpretation of Low‐Temperature Thermochronometer Ages From Tilted Normal Fault Blocks
Low‐temperature thermochronometry is widely used to measure the timing and rate of slip on normal faults. Rates are often derived from suites of footwall thermochronometer samples, but regression of age versus structural depth fails to account for the trajectories of samples during fault slip. We demonstrate that in rotating fault blocks, regression of age‐depth data is susceptible to significant errors (>10%) in the identification of the initiation and rate of faulting. Advection of heat and topographic growth influence the thermal histories of exhumed particles, but for a range of geologically reasonable fault geometries and rates these effects produce Apatite (U‐Th)/He ages comparable to those derived from rotation through fixed isotherms. We apply the fixed‐isotherm model to published data from the Pine Forest Range and the East Range, Nevada, by incorporating field and thermochronologic constraints into a Markov chain Monte Carlo model. Modeled parameters for the Pine Forest Range are described by narrow ranges of geologically reasonable values. Compared to slip rates of 0.3–0.8 km/Myr and an initiation of faulting ca. 11–12 Ma derived from visual inspection, the model predicts an average slip rate of ~1.1 km/Myr and an onset of faulting ca. 9–10 Ma. For the East Range fault block the model suggests that faulting began ~17 Ma with an extension rate of ~3 km/Myr and slowed to an extension rate of ~0.5 km/Myr at ~14 Ma. The absence of a preserved partial retention zone in the East Range sample set limits how well the model can predict fault block geometry.
- 15 October 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (10) , 3647-3667
Open AccessInterpretation of Low‐Temperature Thermochronometer Ages From Tilted Normal Fault Blocks
Low‐temperature thermochronometry is widely used to measure the timing and rate of slip on normal faults. Rates are often derived from suites of footwall thermochronometer samples, but regression of age versus structural depth fails to account for the trajectories of samples during fault slip. We demonstrate that in rotating fault blocks, regression of age‐depth data is susceptible to significant errors (>10%) in the identification of the initiation and rate of faulting. Advection of heat and topographic growth influence the thermal histories of exhumed particles, but for a range of geologically reasonable fault geometries and rates these effects produce Apatite (U‐Th)/He ages comparable to those derived from rotation through fixed isotherms. We apply the fixed‐isotherm model to published data from the Pine Forest Range and the East Range, Nevada, by incorporating field and thermochronologic constraints into a Markov chain Monte Carlo model. Modeled parameters for the Pine Forest Range are described by narrow ranges of geologically reasonable values. Compared to slip rates of 0.3–0.8 km/Myr and an initiation of faulting ca. 11–12 Ma derived from visual inspection, the model predicts an average slip rate of ~1.1 km/Myr and an onset of faulting ca. 9–10 Ma. For the East Range fault block the model suggests that faulting began ~17 Ma with an extension rate of ~3 km/Myr and slowed to an extension rate of ~0.5 km/Myr at ~14 Ma. The absence of a preserved partial retention zone in the East Range sample set limits how well the model can predict fault block geometry.
- 1 January 2018
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 349, 163-176
Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater – Clan Alpine caldera complex, western Nevada, USA
- 1 January 2018
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 349, 163-176
Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater – Clan Alpine caldera complex, western Nevada, USA