JSJindal K. Shah

Jindal K. Shah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jindal K. Shah has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated Moisture-Swing Process for CO2 Capture and Release Using Non-Aqueous Absorbents

    by Rohan Sartape, Ishaku Amos, Venkata S. S. R. P. Yadavalli, Vamsi V. Gande, Rohit Chauhan, Amey S. Thorat, Jindal K. Shah, Meenesh R. Singh

    Moisture-swing CO2 capture has emerged as a promising low-energy alternative to conventional thermal/pressure/vacuum swings by exploiting humidity-driven shifts in carbonate/bicarbonate equilibria, most commonly in solid sorbents such as ion-exchange resins. Extending this concept to non-aqueous liquid absorbents offers attractive processability and scalable contacting, but it requires sufficient bicarbonate solubility/stability in the non-aqueous phase and a practical mechanism to bring bicarbonate into contact with water to trigger moisture-driven CO2 release. Recently, the migration-assisted moisture-gradient (MAMG) concept addressed this by capturing CO2 as bicarbonate in an alkaline deep eutectic solvent (DES). Then, the bicarbonate moves across an anion-exchange membrane under an electric field into an aqueous compartment within an electrodialysis (ED) unit, where hydration shifts equilibria to release CO2. However, for integrated and continuous operation, CO2 absorption in the DES and CO2 release in the aqueous phase must be rate-matched to sustain the electrochemical-potential driving force. Herein, we develop a systematic protocol to develop a moisture-swing process for liquid absorbents by integrating a polypropylene hollow-fiber membrane contactor (HFMC) for CO2 uptake with an ED unit employing alternating bipolar and anion-exchange membranes for bicarbonate transfer and moisture-swing release. CO2 is reactively absorbed into an ethylene glycol–KOH DES in the HFMC to form bicarbonate under kinetically controlled conditions, while the integrated ED unit transfers bicarbonate to an aqueous compartment under an applied electric field to drive hydration-assisted CO2 release and carbonate formation. Integrated operating windows are identified by cross-plotting capture and release rates versus hydroxide concentration in DES, enabling selection of stable rate-matched operating points. Using a 0.4% CO2 feed, the integrated system demonstrates repeatable operation over 15 cycles, achieving capture and release rates of 0.09 mmol h–1 with an energy requirement of ∼250 kJ mol–1 CO2. Furthermore, by using a highly conductive solution, the energy requirement can be reduced to ∼148 kJ mol–1. Notably, the regeneration flux achieved is nearly two orders of magnitude higher than most reported systems operating at substantially higher CO2 feed concentrations. Collectively, these results provide a scalable framework for integrated, moisture-swing-enabled CO2 capture and release from dilute streams using non-aqueous absorbents.

  • Open Access

    MDTransport: A Modular, Open-Source, Extensible Python Tool for Computing Transport Properties from GROMACS and LAMMPS Simulations

    by Ashutosh Kumar Verma, Amey S. Thorat, Jindal K. Shah

    Discovering novel materials for energy-efficient separations, electrochemical reactions, and energy storage requires characterization of thermophysical properties such as diffusivity and ionic conductivity. Over the past several decades, molecular dynamics (MD) simulations have been playing an important role for predictions of properties in a materials-discovery pipeline. In a typical property estimation workflow, trajectories of materials/fluids of interest are generated using MD simulation engines such as GROMACS or LAMMPS, which are then processed to calculate properties such as molar volume, self-diffusion coefficients, ionic conductivity, radial distribution functions, etc. Several postprocessing tools have been developed to facilitate various property calculations. However, many of these tools are geared toward analyzing trajectories produced from a specific MD engine, requiring expertise in multiple postprocessing tools if more than one MD engine is employed, which is very likely given the unique functionalities offered by various MD engines. In addition, these tools are typically limited to routinely computed properties from MD trajectories and do not readily support more advanced analyses, such as cage correlation lifetimes, elucidation of transport mechanisms, or decomposition of ionic conductivity into self- and cross-correlation contributions. To address this research gap, we introduce MDTransport, a comprehensive, open-source, Python-based postprocessing tool, optimized for the estimation of ionic conductivity, self-diffusion coefficient, Onsager transport coefficient, and transference number. It also calculates ion–ion correlation, performs spatial decomposition of cross-correlations, estimates pair and cage correlation lifetimes, performs cluster analysis, and predicts ion-transport mechanisms, thereby providing insights into the structure of the electrolyte and underlying ion dynamics. An intuitive, user-friendly, modular, plug-and-play design, with a prompt-based command-line interface, also allows customization of various input parameters, aiming to serve researchers from diverse research backgrounds and a wide range of programming expertise.


  • Open Access

    Ionic liquid catalyzes reactive CO 2 capture

    by Rohan Sartape, Rashmi Mishra, Vamsi Vikram Gande, Sophia Johnson, Bianca V Berry, Ishaku Amos, Rohit Chauhan, Amey S Thorat, Jindal K. Shah, Meenesh R. Singh

    Ionic liquid catalyzes CO 2 hydroxylation by facilitating pre-activation of CO 2 via solvent reorganization, thereby lowering the reaction's activation barrier.


  • Open Access

    Ionic Liquid-Enhanced Interfaces to Boost Reactive CO 2 Capture

    by Amey S. Thorat, Rohan Sartape, Rohit Chauhan, Rashmi Mishra, Meenesh R. Singh, Jindal K. Shah

    The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas-liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion-ion and ion-solvent interactions and to examine the chemical composition at the gas-liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM]+) and 1-butyl-3-methylimidazolium ([BMIM]+), while the impact of anions is examined using additives based on dicyanamide [DCA]-, triflate [TfO]-, bistriflimide [NTf2]-, and hexafluorophosphate [PF6]- anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO2 solubility, surface tension, and the localization of CO2 around the [OH]- ions at the gas-liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH]- are critical intermediate steps toward reactive CO2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO2 capture performance. Experiments reaffirmed the impact of IL additives on CO2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.


  • Open Access

    Influence of solvents on electrochemical stability window of ionic liquid solutions

    by Rohit Chauhan, Rohan Sartape, Rashmi Mishra, Amey Thorat, Jindal K. Shah, Meenesh R. Singh


  • Open Access

    Cosolvent-tuned interactions in ionic liquids: A vibrational and quantum-chemical study of ethylene glycol ratio effects

    by Rashmi Mishra, Rohan Sartape, Rohit Chauhan, Meenesh R. Singh, Jindal K. Shah


  • Tuning thermodynamics and electronic properties of 1-hexyl-3-methylimidazolium based organic ionic liquids with iron porphyrin

    by Sudip Kumar Das, Jindal K. Shah

    Ionic liquid–iron porphyrin (IL–FeP) complexes are systems with diverse applications, particularly in oxygen reduction reactions and the biodegradation of ionic liquids by cytochrome P450 enzymes, where FeP serves as the active site. Despite the importance of such systems, there is currently a lack of information on the conformational preference of ionic liquids binding to FeP and the influence that such binding conformations exert on the electronic properties of FeP. In addition, the role of binding interactions in facilitating biodegradation of ionic liquids is not yet fully understood. In this article, we address the knowledge gap by employing density functional theory calculations to identify the most stable structures of IL–FeP complexes. We considered four ionic liquids containing the cation 1-hexyl-3-methylimidazolium paired with acetate, methanesulfonate, ethylsulfate, and butylsulfate anions. Thermodynamic analysis of binding was supplemented with energy decomposition analysis, non-covalent interaction analysis, and natural bond orbital analysis to glean insight into the energetic factors driving binding stability. Our results reveal conformations in which one of the oxygen atoms in the anions is positioned directly above Fe, and the imidazolium ring aligns approximately parallel to the FeP plane, which are characterized by strong binding energies, irrespective of the organic anion involved. Electrostatic interactions between the IL ions and FeP play a dominant role in determining the binding conformations. The propensity to acquire an electron by an IL–FeP complex is significantly reduced when oxygen in the anion is in close proximity to Fe. These findings enhance our understanding of the fundamental interactions governing IL–FeP complexes, providing a foundation for tailoring ionic liquids for specific applications in catalysis and biodegradation.

  • Electrochemical Determination of CO 2 Solubility in Ionic Liquids Using High-Throughput Approach

    by Rohit Chauhan, Rohan Sartape, Rashmi Mishra, Jindal Shah, Meenesh R Singh

    The increasing concentration of carbon dioxide (CO 2 ) in the atmosphere, primarily driven by human activities, has emerged as a major contributor to global warming and climate change. In response to this pressing issue, the Paris Agreement has urged nations to significantly curb their CO 2 emissions to limit global temperature rise to below 2 °C. Among the various strategies being explored, the use of room-temperature ionic liquids (RTILs) has gained attention as a promising and industrially relevant method for CO 2 capture, particularly through chemisorption mechanisms. Recent findings indicate that specific RTILs can selectively and efficiently dissolve substantial amounts of CO 2 , making the systematic screening of RTILs critical for identifying optimal candidates for targeted CO 2 absorption. To advance this effort, precise determination of key physicochemical parameters such as solubility and diffusivity is essential. In this context, we employed cyclic voltammetry (CV) as a robust electrochemical technique to evaluate the CO 2 absorption behavior of various RTILs. Utilizing a high-throughput three-electrode configuration, our study integrates the electrocatalytic characteristics of both RTILs and electrode materials to analyze CO 2 solubility and transport properties under different conditions. Additionally, the influence of electrode composition and varying CO 2 concentrations on absorption performance was systematically investigated. Equilibrium data were further analyzed by calculating Henry’s constant, providing deeper insights into the thermodynamic aspects of CO 2 capture in RTILs. This comprehensive approach underscores the potential of electrochemical methods in accelerating the development of efficient CO 2 capture systems based on RTILs.

  • Open Access

    Elucidating electronic and structural changes in metal porphyrins by 1- n -alkyl-3-methylimidazolium cations

    by Atiya Banerjee, Jindal K. Shah

    Metal porphyrins act as the reactive center of the ubiquitous monooxygenase, cytochrome P-450.