Gianluca Cerni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gianluca Cerni has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
F. Cardone
3 shared publications- Antonella D'ALessandro
Department of Civil and Environmental Engineering, University of Perugia, Via G. Duranti, 93, 06125 Perugia, Italy
2 shared publications - Filippo Ubertini
University of Perugia
2 shared publications - Sandro Colagrande
Dipartimento di Architettura e Urbanistica, Università di L'Aquila, Via Campo di Pile, Zona industriale di Pile, 67100 Aquila, Italy
2 shared publications A. Corradini
Dipartimento di Ingegneria Civile ed Ambientale, Università degli Studi di Perugia, via G. Duranti 93, Perugia 06125, Italy
1 shared publicationAlessandro Corradini
University of Perugia
1 shared publication
Latest Publications
- Open Access
- 25 March 2022
- Published by MDPI AG in Infrastructures
- Vol. 7 (4) , 48
Smart Infrastructure Monitoring through Self-Sensing Composite Sensors and Systems: A Study on Smart Concrete Sensors with Varying Carbon-Based Filler
Structural Health Monitoring allows an automated performance assessment of buildings and infrastructures, both during their service lives and after critical events, such as earthquakes or landslides. The strength of this technology is in the diffuse nature of the sensing outputs that can be achieved for a full-scale structure. Traditional sensors adopted for monitoring purposes possess peculiar drawbacks related to placement and maintenance issues. Smart construction materials, which are able to monitor their states of strain and stress, represent a possible solution to these issues, increasing the durability and reliability of the monitoring system through embedding or the bulk fabrication of smart structures. The potentialities of such novel sensors and systems are based on their reliability and flexibility. Indeed, due to their peculiar characteristics, they can combine mechanical and sensing properties. We present a study on the optimization and the characterization of construction materials doped with different types of fillers for developing a novel class of sensors able to correlate variations of external strains to variations of electrical signals. This paper presents the results of an experimental investigation of composite samples at small and medium scales, made of cementitious materials with carbon-based inclusions. Different from a previous work by the authors, different carbon-based filler composite sensors are first compared at a small cubic sample scale and then tailored for larger plate specimens. Possible applications are in the strain/stress monitoring, damage detection, and load monitoring of concrete buildings and infrastructures.
- 25 March 2022
- Published by MDPI AG in Infrastructures
- Vol. 7 (4) , 48
Open AccessSmart Infrastructure Monitoring through Self-Sensing Composite Sensors and Systems: A Study on Smart Concrete Sensors with Varying Carbon-Based Filler
Structural Health Monitoring allows an automated performance assessment of buildings and infrastructures, both during their service lives and after critical events, such as earthquakes or landslides. The strength of this technology is in the diffuse nature of the sensing outputs that can be achieved for a full-scale structure. Traditional sensors adopted for monitoring purposes possess peculiar drawbacks related to placement and maintenance issues. Smart construction materials, which are able to monitor their states of strain and stress, represent a possible solution to these issues, increasing the durability and reliability of the monitoring system through embedding or the bulk fabrication of smart structures. The potentialities of such novel sensors and systems are based on their reliability and flexibility. Indeed, due to their peculiar characteristics, they can combine mechanical and sensing properties. We present a study on the optimization and the characterization of construction materials doped with different types of fillers for developing a novel class of sensors able to correlate variations of external strains to variations of electrical signals. This paper presents the results of an experimental investigation of composite samples at small and medium scales, made of cementitious materials with carbon-based inclusions. Different from a previous work by the authors, different carbon-based filler composite sensors are first compared at a small cubic sample scale and then tailored for larger plate specimens. Possible applications are in the strain/stress monitoring, damage detection, and load monitoring of concrete buildings and infrastructures.
- 30 August 2015
- Published by Springer Nature
- p. 557-568
Mechanical Behaviour of Asphalt Concrete Containing C&D Recycled Materials
- 30 August 2015
- Published by Springer Nature
- p. 557-568
Mechanical Behaviour of Asphalt Concrete Containing C&D Recycled Materials
- 30 July 2014
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 16 (1) , 70-88
Resilient behaviour of unbound granular materials through repeated load triaxial test: influence of the conditioning stress
The present paper reports the results of a laboratory investigation aimed to investigate the resilient behaviour of unbound granular materials (UGMs) for pavement unbound layers under repeated triaxial loading. The first part of research was focused on the effects of stress history, in terms of loading conditioning phase and stress paths, on the resilient response of the investigated UGM. The obtained results highlighted that the samples that experienced several stress paths after an initial stress conditioning showed reduced resilient moduli as well as higher stress dependency of the resilient properties as compared with samples not subjected to any specific stress history. The second part of research aimed to evaluate the influence of the conditioning stress level on the resilient modulus. The results showed poorer resilient characteristics along the several stress paths as the selected conditioning stress increases. Whereas, a sort of “loading memory effect”, resulting in a similar mechanical behaviour, can be recognised as a similar stress state between conditioning phase and subsequent stress path is considered. The study confirms the high dependency of the resilient response of UGM on the stress condition and in particular, the main role of conditioning confining pressure on the stable mechanical behaviour of these materials is highlighted. Finally, a simplified approach that would allow the intrinsic resilient properties of UGM to be predicted for a specific combination of conditioning stresses and stress paths is proposed.
- 30 July 2014
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 16 (1) , 70-88
Resilient behaviour of unbound granular materials through repeated load triaxial test: influence of the conditioning stress
The present paper reports the results of a laboratory investigation aimed to investigate the resilient behaviour of unbound granular materials (UGMs) for pavement unbound layers under repeated triaxial loading. The first part of research was focused on the effects of stress history, in terms of loading conditioning phase and stress paths, on the resilient response of the investigated UGM. The obtained results highlighted that the samples that experienced several stress paths after an initial stress conditioning showed reduced resilient moduli as well as higher stress dependency of the resilient properties as compared with samples not subjected to any specific stress history. The second part of research aimed to evaluate the influence of the conditioning stress level on the resilient modulus. The results showed poorer resilient characteristics along the several stress paths as the selected conditioning stress increases. Whereas, a sort of “loading memory effect”, resulting in a similar mechanical behaviour, can be recognised as a similar stress state between conditioning phase and subsequent stress path is considered. The study confirms the high dependency of the resilient response of UGM on the stress condition and in particular, the main role of conditioning confining pressure on the stable mechanical behaviour of these materials is highlighted. Finally, a simplified approach that would allow the intrinsic resilient properties of UGM to be predicted for a specific combination of conditioning stresses and stress paths is proposed.
- 1 December 2012
- Published by Elsevier in Construction and Building Materials
- Vol. 37, 573-580
Permanent deformation behaviour of unbound recycled mixtures
- 1 December 2012
- Published by Elsevier in Construction and Building Materials
- Vol. 37, 573-580
Permanent deformation behaviour of unbound recycled mixtures
- 1 March 2012
- Published by Elsevier in Construction and Building Materials
- Vol. 28 (1) , 79-87
Characterisation of permanent deformation behaviour of unbound granular materials under repeated triaxial loading
- 1 March 2012
- Published by Elsevier in Construction and Building Materials
- Vol. 28 (1) , 79-87
Characterisation of permanent deformation behaviour of unbound granular materials under repeated triaxial loading
- 1 January 2012
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2309 (1) , 157-167
New Approach to Defining Continuous Speed Profile Models for Two-Lane Rural Roads
Despite a large body of research on operating speeds, there is still much to learn about the factors that affect free-flow speeds, especially with regard to the development of a continuous speed profile for two-lane rural highways. This paper presents a new approach to modeling driver speed profile along two-lane rural roads. Speed data regarding individual drivers traveling on selected two-lane rural roads were sampled during a naturalistic experiment that used an onboard Global Positioning System (GPS). GPS devices facilitate the collecting and processing of continuous speed data. Unlike spot speed measurements, which have typically been collected in similar studies, continuous speed data are useful for studying the actual speed profile with regard to acceleration–deceleration behavior and maximum speed on tangents and curves. New variables are used in the regression equation. These variables refer to the horizontal curvature and the vertical grade as weighted values of the geometric features of the alignment preceding and following the vehicle position. To predict the operating speed, the model takes into account the geometric alignment of the road preceding and following the vehicle, as this information is used by drivers to establish the driving task, which is based on memory expectation, vehicle dynamics, and visual perception. The final result is an algorithm for modeling a continuous speed profile without previous assumption of acceleration–deceleration rate and constant speed on tangents and curves.
- 1 January 2012
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2309 (1) , 157-167
New Approach to Defining Continuous Speed Profile Models for Two-Lane Rural Roads
Despite a large body of research on operating speeds, there is still much to learn about the factors that affect free-flow speeds, especially with regard to the development of a continuous speed profile for two-lane rural highways. This paper presents a new approach to modeling driver speed profile along two-lane rural roads. Speed data regarding individual drivers traveling on selected two-lane rural roads were sampled during a naturalistic experiment that used an onboard Global Positioning System (GPS). GPS devices facilitate the collecting and processing of continuous speed data. Unlike spot speed measurements, which have typically been collected in similar studies, continuous speed data are useful for studying the actual speed profile with regard to acceleration–deceleration behavior and maximum speed on tangents and curves. New variables are used in the regression equation. These variables refer to the horizontal curvature and the vertical grade as weighted values of the geometric features of the alignment preceding and following the vehicle position. To predict the operating speed, the model takes into account the geometric alignment of the road preceding and following the vehicle, as this information is used by drivers to establish the driving task, which is based on memory expectation, vehicle dynamics, and visual perception. The final result is an algorithm for modeling a continuous speed profile without previous assumption of acceleration–deceleration rate and constant speed on tangents and curves.
- 30 June 2011
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 12 (2)
Comparative Analysis of Gyratory and Proctor Compaction Processes of Unbound Granular Materials
The Proctor method is the most widely utilized compaction method in the study of unbound granular soils that are used in road infrastructures. However, a possible drawback of the Proctor test is that material undergoes impact loads that do not have a well defined correspondence with the energy application modes in field compaction methods. For this reason, some research studies have recently focused on the use of the gyratory method, which has been successfully utilized so far in the study of bituminous mixture, for unbound materials. In the present work, the elaboration of the data allowed the authors to understand and compare the evolution of the densification processes attained with the two compaction methods. In particular, correlations were found between the energies transferred by the two devices to reach the same density level.
- 30 June 2011
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 12 (2)
Comparative Analysis of Gyratory and Proctor Compaction Processes of Unbound Granular Materials
The Proctor method is the most widely utilized compaction method in the study of unbound granular soils that are used in road infrastructures. However, a possible drawback of the Proctor test is that material undergoes impact loads that do not have a well defined correspondence with the energy application modes in field compaction methods. For this reason, some research studies have recently focused on the use of the gyratory method, which has been successfully utilized so far in the study of bituminous mixture, for unbound materials. In the present work, the elaboration of the data allowed the authors to understand and compare the evolution of the densification processes attained with the two compaction methods. In particular, correlations were found between the energies transferred by the two devices to reach the same density level.
- 1 April 2011
- Published by Elsevier in Construction and Building Materials
- Vol. 25 (4) , 2133-2145
Low-temperature tensile behaviour of asphalt binders: Application of loading time–temperature–conditioning time superposition principle
- 1 April 2011
- Published by Elsevier in Construction and Building Materials
- Vol. 25 (4) , 2133-2145
Low-temperature tensile behaviour of asphalt binders: Application of loading time–temperature–conditioning time superposition principle