Genliang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Genliang Chen has a total of 125 co-authors. Here are the top co-authors by number of shared publications:
Hao Wang
40 shared publications- Hao Wang
Shanghai Jiao Tong University
27 shared publications - Zhuang Zhang
Institute of AI and Robotics, Fudan University, Shanghai, China
13 shared publications - Shujie Tang
Meta Robotics Institute and the State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai, China
7 shared publications - Siyue Yao
Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures, Shanghai Jiao Tong University, Shanghai, China
7 shared publications Xuyang Duan
7 shared publications
Latest Publications
- 4 November 2026
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 18 (12) , 1-11
Design and Validation of a Novel Planar 2R1T Remote Center-of-Motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages
Benefiting from small incision and fast recovery, minimally invasive surgeries (MIS) exhibit great advantages in clinical operations. In such kind of surgeries, the remote center-of-motion (RCM) mechanisms play an important role owing to their special motion characteristics. This paper presents the design of a novel planar RCM mechanism of two rotational and one translational degrees-of-freedom (DOF). In the proposed design, the mobility of RCM mechanism is decomposed into one-DOF pure rotation and translation with a remote stationary point. The dual-triangular linkage and the Peaucellier–Lipkin straight-line linkage are introduced to achieve the remote rotation and translation, respectively. Inspired by the concept of virtual screw, a dual-helical differential-motion joint is particularly designed to generate the coaxial rotation and translation. A preliminary prototype is developed to validate the feasibility of the designed RCM mechanism. The experimental results show that the developed prototype is easy to control and of acceptable positioning accuracy, which manifests potential application in MIS.
- 4 November 2026
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 18 (12) , 1-11
Design and Validation of a Novel Planar 2R1T Remote Center-of-Motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages
Benefiting from small incision and fast recovery, minimally invasive surgeries (MIS) exhibit great advantages in clinical operations. In such kind of surgeries, the remote center-of-motion (RCM) mechanisms play an important role owing to their special motion characteristics. This paper presents the design of a novel planar RCM mechanism of two rotational and one translational degrees-of-freedom (DOF). In the proposed design, the mobility of RCM mechanism is decomposed into one-DOF pure rotation and translation with a remote stationary point. The dual-triangular linkage and the Peaucellier–Lipkin straight-line linkage are introduced to achieve the remote rotation and translation, respectively. Inspired by the concept of virtual screw, a dual-helical differential-motion joint is particularly designed to generate the coaxial rotation and translation. A preliminary prototype is developed to validate the feasibility of the designed RCM mechanism. The experimental results show that the developed prototype is easy to control and of acceptable positioning accuracy, which manifests potential application in MIS.
- 10 October 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 231
A Bricard-inspired origami chamber for wide-range pneumatic rotary actuation in rigid–soft hybrid fingers
- 10 October 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 231
A Bricard-inspired origami chamber for wide-range pneumatic rotary actuation in rigid–soft hybrid fingers
- 5 September 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 411
A biomimetic multimodal whisker sensor for both contact and airflow sensing of mobile robots
- 5 September 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 411
A biomimetic multimodal whisker sensor for both contact and airflow sensing of mobile robots
- 11 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Modeling and Optimization of a Variable Stiffness Compliant Gripper With the Flexible Parallelogram Mechanism
The compliant parallel gripper has been widely applied in industrial fields, including automation assembly, agriculture, and electronics, owing to its compliance and versatility. However, stiffness modeling and optimal design of compliant grippers remain a challenge due to the nonlinear force-motion behaviors of flexible materials with large deflections. This article presents a comprehensive approach to establishing an analytical stiffness model for the analysis and optimization of a compliant gripper. Elastic beams of arbitrary initial curved geometry form a flexible parallelogram mechanism, constituting a delicately designed planar compliant gripper with beneficial stiffness characteristics for operations, including variable capability, axial and grasping decoupling, and a centrally located compliance center. Based on modeling, initial beam shapes are optimized to obtain pure or actively tuned passive compliance with a wide variation, over $100\times$ for grasping stiffness and over $500\times$ for axial stiffness. Finite element analysis and experiments based on elastic beams with distinct geometries and materials are carried out to validate the method. Finally, diverse grasping scenarios and a demonstration of the autonomous peg-into-hole task are accomplished, showcasing the performance and potential usage of the compliant gripper in industrial applications.
- 11 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Modeling and Optimization of a Variable Stiffness Compliant Gripper With the Flexible Parallelogram Mechanism
The compliant parallel gripper has been widely applied in industrial fields, including automation assembly, agriculture, and electronics, owing to its compliance and versatility. However, stiffness modeling and optimal design of compliant grippers remain a challenge due to the nonlinear force-motion behaviors of flexible materials with large deflections. This article presents a comprehensive approach to establishing an analytical stiffness model for the analysis and optimization of a compliant gripper. Elastic beams of arbitrary initial curved geometry form a flexible parallelogram mechanism, constituting a delicately designed planar compliant gripper with beneficial stiffness characteristics for operations, including variable capability, axial and grasping decoupling, and a centrally located compliance center. Based on modeling, initial beam shapes are optimized to obtain pure or actively tuned passive compliance with a wide variation, over $100\times$ for grasping stiffness and over $500\times$ for axial stiffness. Finite element analysis and experiments based on elastic beams with distinct geometries and materials are carried out to validate the method. Finally, diverse grasping scenarios and a demonstration of the autonomous peg-into-hole task are accomplished, showcasing the performance and potential usage of the compliant gripper in industrial applications.
- 4 February 2026
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 45 (13) , 2117-2137
Contact sensing methodology based on propagation of interaction-induced deformation in elastic beams
Owing to the capability of environment perception, contact sensors are increasingly used in robotic systems to enhance their ability to interact with the environment. This paper proposes a simple contact sensing methodology based on the continuum mechanics of largely deformed beams. Slender elastic beams embedded with flexible strain gauges are employed as the sensing medium for contact perception. An explicit model characterizing the beam’s force-deflection behavior is established to map the local bending of strain gauges to the contact-induced global deformation. Thus, the exact status of contact positions and forces can be determined efficiently. A variety of experiments are conducted to validate the effectiveness of the developed contact sensor. In addition to contact perception, the elastic beam endows robotic systems with structural compliance for interactive manipulation. Hence, applications for object size identification, active control of contact force, and force-based collaboration are provided to exhibit the potential of the proposed contact sensing methodology in mobile robots.
- 4 February 2026
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 45 (13) , 2117-2137
Contact sensing methodology based on propagation of interaction-induced deformation in elastic beams
Owing to the capability of environment perception, contact sensors are increasingly used in robotic systems to enhance their ability to interact with the environment. This paper proposes a simple contact sensing methodology based on the continuum mechanics of largely deformed beams. Slender elastic beams embedded with flexible strain gauges are employed as the sensing medium for contact perception. An explicit model characterizing the beam’s force-deflection behavior is established to map the local bending of strain gauges to the contact-induced global deformation. Thus, the exact status of contact positions and forces can be determined efficiently. A variety of experiments are conducted to validate the effectiveness of the developed contact sensor. In addition to contact perception, the elastic beam endows robotic systems with structural compliance for interactive manipulation. Hence, applications for object size identification, active control of contact force, and force-based collaboration are provided to exhibit the potential of the proposed contact sensing methodology in mobile robots.
- 14 January 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 220
An offline path planning framework for reconfigurable cable-driven parallel mechanisms via Lie algebra interpolation
- 14 January 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 220
An offline path planning framework for reconfigurable cable-driven parallel mechanisms via Lie algebra interpolation
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 2599-2609
JTBot: A Flexible-Rigid Junction Tensegrity Robot for Unstructured Pipeline Inspection
Owing to the resilience in structure and adaptability to the environment, tensegrity robots have a variety of potential applications in environmental exploration, search and rescue, and other fields. However, the interaction with the environment could be unpredictable, which requires the robots to be equipped with the ability of environment perception. This article presents a junction tensegrity robot (JTBot), which consists of both flexible and rigid struts, for the inspection of unstructured pipelines. Slender elastic beams are utilized to replace the rigid rods to enhance the robot’s dexterity and flexibility by generating large-scale deformations. Compact deflection sensors are embedded onto the flexible struts to enable the JTBot with the capability to estimate its equilibrium state and to predict the contact conditions with the environment. A closed-form model of the robot’s kinetostatics is established to characterize the interaction behavior of such a cable-constrained flexible mechanism efficiently. Hence, in situ gait optimization can be implemented for the crawling robot with the aid of the intrinsic environmental perception. A prototype of the JTBot is developed to verify the feasibility and effectiveness of the proposed design, on which a variety of validation experiments are carried out. The results indicate that the developed JTBot is able to pass through complex pipelines in a dexterous way. In addition, a demonstration is provided to illustrate the JTBot’s capability of defect detection in unstructured pipelines.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 2599-2609
JTBot: A Flexible-Rigid Junction Tensegrity Robot for Unstructured Pipeline Inspection
Owing to the resilience in structure and adaptability to the environment, tensegrity robots have a variety of potential applications in environmental exploration, search and rescue, and other fields. However, the interaction with the environment could be unpredictable, which requires the robots to be equipped with the ability of environment perception. This article presents a junction tensegrity robot (JTBot), which consists of both flexible and rigid struts, for the inspection of unstructured pipelines. Slender elastic beams are utilized to replace the rigid rods to enhance the robot’s dexterity and flexibility by generating large-scale deformations. Compact deflection sensors are embedded onto the flexible struts to enable the JTBot with the capability to estimate its equilibrium state and to predict the contact conditions with the environment. A closed-form model of the robot’s kinetostatics is established to characterize the interaction behavior of such a cable-constrained flexible mechanism efficiently. Hence, in situ gait optimization can be implemented for the crawling robot with the aid of the intrinsic environmental perception. A prototype of the JTBot is developed to verify the feasibility and effectiveness of the proposed design, on which a variety of validation experiments are carried out. The results indicate that the developed JTBot is able to pass through complex pipelines in a dexterous way. In addition, a demonstration is provided to illustrate the JTBot’s capability of defect detection in unstructured pipelines.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 23202-23213
Design of a Novel Force-Controlled End-Effector With Passive Structural Compliance and Intrinsic Contact Sensing
This paper presents a novel active force-controlled end-effector with passive structural compliance and intrinsic contact sensing capabilities. Slender elastic beams are introduced to provide the end-effector with structural compliance to accommodate inevitable fluctuations through deformation during operation. Meanwhile, flexible strain gauges are embedded into the slender elastic beams to endow the end-effector with intrinsic sensing capability. A kinetostatic model is established in closed-form to map the local deflections of strain gauges to the contact force with the environment. On this basis, model-based feedback control can be readily implemented to actively adjust the contact force between the end-effector and the workpiece. A prototype is developed, on which a variety of experiments are conducted to validate the effectiveness of the proposed end-effector. The results demonstrate that the end-effector can control the contact force accurately, with a maximum error of around 0.65N. Furthermore, a demonstration of robotic grinding using the developed prototype showcases its potential for practical applications.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 23202-23213
Design of a Novel Force-Controlled End-Effector With Passive Structural Compliance and Intrinsic Contact Sensing
This paper presents a novel active force-controlled end-effector with passive structural compliance and intrinsic contact sensing capabilities. Slender elastic beams are introduced to provide the end-effector with structural compliance to accommodate inevitable fluctuations through deformation during operation. Meanwhile, flexible strain gauges are embedded into the slender elastic beams to endow the end-effector with intrinsic sensing capability. A kinetostatic model is established in closed-form to map the local deflections of strain gauges to the contact force with the environment. On this basis, model-based feedback control can be readily implemented to actively adjust the contact force between the end-effector and the workpiece. A prototype is developed, on which a variety of experiments are conducted to validate the effectiveness of the proposed end-effector. The results demonstrate that the end-effector can control the contact force accurately, with a maximum error of around 0.65N. Furthermore, a demonstration of robotic grinding using the developed prototype showcases its potential for practical applications.