WMWilliam Morrison

William Morrison

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


William Morrison has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Urban atmospheric CO 2 plumes from space – Part 2: Representation of fine-scale structures

    by Alohotsy Rafalimanana, Thomas Lauvaux, Charbel Abdallah, Mali Chariot, Michel Ramonet, Josselin, Olivier Laurent, Morgan Lopez, Anja Raznjevic, Maarten Krol, et al.

    Quantifying urban CO2 emissions using spaceborne total column observations requires atmospheric transport models capable of resolving fine-scale spatial and temporal variability across metropolitan areas. Using the Grand Paris region as a testbed, we evaluated the sensitivity of simulated CO2 fields to spatial resolution and model physics within the Weather Research and Forecasting model coupled to a high-resolution fossil fuel emissions inventory. Simulations were conducted at mesoscale (900 m) and Large-Eddy Simulation (LES) resolutions (300 m and 100 m), and evaluated against dense urban CO2 observations from the Paris Picarro and rooftop mid-cost sensors network. Horizontal resolution strongly affects plume morphology: high-resolution simulations produce sharper gradients, higher peak mixing ratios and more realistic temporal variability. LES simulations capture localized enhancements and intra-urban variability more accurately than the 900 m mesoscale run, which systematically underestimates spatial contrasts by a factor of 2–3. Aggregation experiments indicate that averaging LES simulations to 900 m significantly modifies plume magnitudes and spatial gradients. Domain-mean relative errors for near-surface CO2 reach 29–34 % in winter and 59–61 % in summer, while column-integrated XCO2 shows 21–22 % errors in winter and 58–59 % in summer, with maxima exceeding 70 %. While LES improves the representation of urban CO2 variability, it increases sensitivity to local wind and inventory uncertainties, meaning misplaced point sources can cause large local biases. These findings emphasize the need for inversion frameworks able to incorporate scale-dependent transport and inventory uncertainties to ensure unbiased top-down emission estimates and accurate spatial attribution within city domains.

  • Open Access

    Urban atmospheric CO 2 plumes from space – Part 1: Atmospheric modeling of the urban boundary layer

    by Alohotsy Rafalimanana, Thomas Lauvaux, Charbel Abdallah, Mali Chariot, Michel Ramonet, Josselin, Olivier Laurent, Morgan Lopez, Anja Raznjevic, Maarten Krol, et al.

    Interpreting atmospheric CO2 observations over cities from space requires transport models that accurately link concentration patterns to surface fluxes, making realistic urban boundary-layer representation critical. This study examines how urban physics parameterizations influence boundary-layer dynamics and near-surface CO2 mixing ratios over the Paris metropolitan area under winter and summer conditions. Using the Weather Research and Forecasting (WRF) model, four configurations are evaluated: no-urban representation (No_URB), a single-layer urban canopy model (SLUCM), and two multi-layer schemes (BEP: Building Effect Parameterization and BEM: Building Energy Model). Model outputs are assessed against surface energy flux observations, turbulence measurements, planetary boundary layer height (PBLH), and near-surface CO2 mixing ratios from dense urban and suburban monitoring networks, alongside wind, temperature and humidity. Urban physics exert strong control on wintertime boundary-layer structure and CO2 variability, with scheme differences driven primarily by sensible heat flux, friction velocity, and turbulent kinetic energy, producing large contrasts in PBLH and CO2 accumulation. In summer, PBLH diurnal patterns converge across schemes, with a characteristic plateau during active convection, and CO2 variability becomes dominated by convective mixing. BEM provides the most physically consistent representation across both seasons. Sensitivity tests with three planetary boundary layer schemes show that Mellor–Yamada–Janjic coupled with BEM best reproduces wintertime CO2, capturing realistic nighttime accumulation and daytime mixing, while Yonsei University and BouLac exhibit systematic biases. These results demonstrate that realistic urban physics combined with an appropriate turbulence scheme are essential for physically consistent urban CO2 simulations, particularly in winter.

  • Open Access

    Coupling the atmospheric model Meso-NH-v5.5 with the Monte-Carlo solver of conductive-radiative-convective heat exchanges stardis-v0.11.1 to calculate the surface energy balance of complex geometries

    by Robert Schoetter, Cyril Caliot, Florent Retailleau, Tim Nagel, Christophe Coustet, Vincent Eymet, Vincent Forest, Frédéric Hourdin, Atsushi Inagaki, Simone Kotthaus, et al.

    The meteorological impact on humans and infrastructure in urban areas is strongly influenced by the air temperature, humidity, wind velocity, and radiative fluxes. These can be strongly heterogeneous in urban environments with complex 3-D building and vegetation geometry. Micrometeorological building-resolving models have been developed to solve the prognostic equations of the atmospheric variables in urban areas at metric resolution. They take into account the radiative exchanges in the 3-D urban geometry and heat conduction in the building and ground surfaces with separate deterministic approaches. An alternative introduced in this study is to solve the 3-D heat conduction, radiation, and convection with the stochastic Monte-Carlo Method (MCM) in a unified algorithm. Such MCM solvers have become available thanks to recent breakthroughs in the Monte-Carlo community, which allow to establish a connection between conductive and radiative random walks. The advantage of the MCM is that the calculation is independent of the complexity of the urban geometry, the calculations can deal with a large range of scales, and are easy to parallelise. In this study, the coupling between the atmospheric model Meso-NH and the Monte-Carlo solver stardis of conductive-radiative-convective heat exchanges is presented. Humid processes cannot yet be considered with the new model. The coupled model is evaluated against observational data for dry heat wave conditions at the impervious Comprehensive Outdoor Scale MOdel (COSMO) urban-like site in the northern outskirts of Tokyo (Japan). Evaluation results show that the model represents well the temporal evolution of the sensible heat flux and the vertical profiles of air temperature in the urban roughness sublayer. Future developments could focus on including urban vegetation and moist processes such as to enable the study of adaptation measures in urban areas.

  • Open Access

    Hectometric-scale modelling of the mixed layer in an urban region evaluated with a dense LiDAR-ceilometer network

    by Russell H. Glazer, Sue Grimmond, Lewis Blunn, Daniel Fenner, Humphrey Lean, Andreas Christen, Will Morrison, Dana Looschelders, Jonathan K. P. Shonk

    With development in recent years of hectometric (𝒪(100 m); hm) scale numerical weather prediction (NWP) models, there is a need for their evaluation with high spatio-temporal scale observations. Here we assess UK Met Office Unified Model (UM) simulations with grid-spacing down to 100 m using a dense network of observations obtained during the urbisphere -Berlin campaign. A network of 25 automatic lidars-ceilometers (ALCs) provide aerosol attenuated backscatter observations from which mixed-layer height (MLH) is determined. UM simulated aerosol on 2 d (18 April and 4 August 2022) is used to determine model MLH with a novel algorithm (MMLH). Evaluation of MMLH with ALCs is focused on the MLH (1) urban-rural variability, and (2) urban plume. MMLH is consistently able to reproduce the vertical extent of the mixed layer during late afternoon despite the 2 case-study days having different maxima. MMLH performance is better in the 100 m model domain compared to a 300 m configuration, which may be explained by the higher vertical resolution in the 100 m configuration. During the August case in which an extreme heat event occurred, a delayed MLH growth is seen in the morning and afternoon over the city compared to the rural surroundings in both the model and ALCs. Both days show a distinct influence of the city through the mixed layer, including a plume extending downwind of the city that is detectable in both the observations and model. The modelled urban plume has a deeper mixed layer compared to the rural surroundings (4 August: ∼ 500 m; 18 April: ∼ 200 m) for up to 15 km downwind of the city.


  • Open Access

    Hectometric-scale modelling of the urban mixed layer evaluated with a dense LiDAR-ceilometer network

    by Russell H. Glazer, Sue Grimmond, Lewis Blunn, Daniel Fenner, Humphrey Lean, Andreas Christen, Will Morrison, Dana Looschelders

    With development in recent years of hectometric (O(100 m); hm) scale numerical weather prediction (NWP) models, there is a need for their evaluation with high spatio-temporal scale observations. Here we assess UK Met Office Unified Model (UM) simulations with grid-spacing down to 100 m using a dense network of observations obtained during the urbisphere-Berlin campaign. A network of 25 automatic lidars-ceilometers (ALCs) provide aerosol attenuated backscatter observations from which mixed-layer height (MLH) is determined. UM simulated aerosol on two days (18 April and 4 August 2022) is used to determine model MLH with a novel algorithm (MMLH). MMLH is consistently able to reproduce the vertical extent of the mixed layer during late afternoon despite the two case-study days having different maxima. MMLH performance is better in the 100 m model domain compared to a 300 m configuration, which may be explained by the higher vertical resolution in the 100 m configuration. During the August case in which an extreme heat event occurred, a delayed MLH growth is seen in the morning and afternoon over the city compared to the rural surroundings in both the model and ALCs. Both days show a distinct influence of the city through the mixed layer, including a plume extending downwind of the city that is detectable in both the observations and model. The modelled urban plume has a deeper mixed layer compared to the rural surroundings (4 August: ~500 m; 18 April: ~200 m) for up to 15 km downwind of the city.


  • Open Access

    Supplementary material to "Hectometric-scale modelling of the urban mixed layer evaluated with a dense LiDAR-ceilometer network"

    by Russell H. Glazer, Sue Grimmond, Lewis Blunn, Daniel Fenner, Humphrey Lean, Andreas Christen, Will Morrison, Dana Looschelders

  • Open Access

    Methodology to evaluate numerical weather predictions using large‐aperture scintillometry sensible heat fluxes: Demonstration in London

    by Beth Saunders, Sue Grimmond, Denise Hertwig, Sylvia I. Bohnenstengel, Humphrey W. Lean, William Morrison

    To evaluate numerical weather predictions (NWP) using observations, the horizontal, vertical and temporal resolution characteristics need to be considered to ensure consistency. Here, large‐aperture scintillometry (LAS) is used to derive turbulent sensible heat fluxes ( Q H ), as the source area extents are comparable to NWP with horizontal grid box resolutions of order 1 km. We demonstrate our methodology using LAS observations undertaken in central London and the Met Office's operational forecast model for the United Kingdom (UKV). In the horizontal, we ensure consistency between the LAS source area locations and extent, as they vary with wind direction and stability, and therefore the NWP grid boxes that should be selected for comparison. In the vertical, the appropriate model level needs to be selected relative to the changing effective measurement height ( z f ) of the observations. The LAS fluxes time and space averaging allows Q H to be obtained for time periods similar to the model timestep (e.g., 1 min) but the UKV does not explicitly represent higher‐frequency turbulent motions. During two spring days, three to five UKV grid boxes (1.5 km resolution) fall within the LAS source area (60%). However, with the model land cover data lacking realistic spatial variability, modelled effective surface Q H spatial variability is small, leaving a central grid box on the LAS path representative. Larger differences occur between modelled Q H at the surface and closest to z f , despite both theoretically being within the inertial sublayer. The modelled Q H has better agreement with observed fluxes when averaged over long periods (10+ min cf . 1 min). As LAS‐derived Q H has larger source areas than eddy covariance (EC) measurements, there are benefits to assessing NWP model performance with LAS. With multiple paths, spatial variability in response to changes in surface cover could be assessed at shorter times scales than possible with EC.


  • Open Access

    Utility of thermal remote sensing for evaluation of a high‐resolution weather model in a city

    by Thomas W. Hall, Lewis Blunn, Sue Grimmond, Niall McCarroll, Christopher J. Merchant, William Morrison, Jonathan K. P. Shonk, Humphrey Lean, Martin Best

    Progress in high‐resolution numerical weather prediction (NWP) for urban areas will require new modelling approaches and extensive evaluation. Here, we exploit land surface temperature (LST) data from Landsat‐8 to assess 100 m resolution NWP for London (UK) on four cloud‐free days. The LST observations are directional radiometric temperatures with non‐negligible uncertainties. We consider the challenges of informative comparison between the Landsat LST and the NWP scheme's internal characterisation of the complete surface temperature. The LST spatial coverage allows large‐scale observation–model differences to be explored. In one case, obvious spatial artifacts in the NWP surface temperature are observed relative to the Landsat LST. These are found to be related to the NWP's initial method of downscaling of soil moisture using soil properties. Updated model runs have higher spatial correlation between model and Landsat LST. In cases where meteorological conditions favour the formation of horizontal convective rolls, warmer air temperatures associated with updraughts in the mixed layer extend inappropriately to the urban surface. This manifests as warm stripes in the model surface temperature that are not present in the Landsat LST. NWP–Landsat LST differences are larger in more built‐up areas on days nearer summer solstice. This is largely attributed to urban thermal anisotropy, as Landsat preferentially views warmer urban surfaces, whereas the model LST represents all surfaces. We evaluate two approaches to quantify this sampling effect, but further work is needed to fully constrain it and facilitate more informative model evaluation.


  • Open Access

    Evaluation of the SPARTACUS-Urban Radiation Model for Vertically Resolved Shortwave Radiation in Urban Areas

    by Megan A. Stretton, William Morrison, Robin J. Hogan, Sue Grimmond

    The heterogenous structure of urban environments impacts interactions with radiation, and the intensity of urban–atmosphere exchanges. Numerical weather prediction (NWP) often characterizes the urban structure with an infinite street canyon, which does not capture the three-dimensional urban morphology realistically. Here, the SPARTACUS (Speedy Algorithm for Radiative Transfer through Cloud Sides) approach to urban radiation (SPARTACUS-Urban), a multi-layer radiative transfer model designed to capture three-dimensional urban geometry for NWP, is evaluated with respect to the explicit Discrete Anisotropic Radiative Transfer (DART) model. Vertical profiles of shortwave fluxes and absorptions are evaluated across domains spanning regular arrays of cubes, to real cities (London and Indianapolis). The SPARTACUS-Urban model agrees well with the DART model (normalized bias and mean absolute errors < 5.5%) when its building distribution assumptions are fulfilled (i.e., buildings randomly distributed in the horizontal). For realistic geometry, including real-world building distributions and pitched roofs, SPARTACUS-Urban underestimates the effective albedo (< 6%) and ground absorption (< 16%), and overestimates wall-plus-roof absorption (< 15%), with errors increasing with solar zenith angle. Replacing the single-exponential fit of the distribution of building separations with a two-exponential function improves flux predictions for real-world geometry by up to half. Overall, SPARTACUS-Urban predicts shortwave fluxes accurately for a range of geometries (cf. DART). Comparison with the commonly used single-layer infinite street canyon approach finds SPARTACUS-Urban has an improved performance for randomly distributed and real-world geometries. This suggests using SPARTACUS-Urban would benefit weather and climate models with multi-layer urban energy balance models, as it allows more realistic urban form and vertically resolved absorption rates, without large increases in computational cost or data inputs.