Debarati Mitra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Debarati Mitra has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Monalisha Samanta
Department of Chemical Technology, University of Calcutta, Kolkata, India
2 shared publications- Monalisha Samanta
Department of Chemical Technology, University of Calcutta, Kolkata, India
2 shared publications Sayan Roychowdhury
Department of Chemical Technology, University of Calcutta, Kolkata, India
2 shared publicationsSubhajit Kundu
University of Calcutta
2 shared publications- Subhajit Kundu
Department of Chemical Technology, University of Calcutta, Kolkata, India
2 shared publications Anirban Chakraborty
Department of Chemical Technology, University of Calcutta, Kolkata, India
1 shared publication
Latest Publications
- 21 February 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 398
Green synthesis and performance evaluation of mixed fatty acids-based esters as nonionic antifoaming biosurfactants
- 21 February 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 398
Green synthesis and performance evaluation of mixed fatty acids-based esters as nonionic antifoaming biosurfactants
- 24 November 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 32 (5) , 2284-2298
Synthesis and Characterization of Polyesteramide Resin from Acacia auriculiformis Seed Oil for Surface Coating Application
- 24 November 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 32 (5) , 2284-2298
Synthesis and Characterization of Polyesteramide Resin from Acacia auriculiformis Seed Oil for Surface Coating Application
- 8 December 2022
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 210 (10) , 1773-1790
Model development, simulation and parameter estimation for pervaporative separation of benzene from model pyrolysis gasoline using insitu(nano)silver/polyvinyl alcohol membrane
- 8 December 2022
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 210 (10) , 1773-1790
Model development, simulation and parameter estimation for pervaporative separation of benzene from model pyrolysis gasoline using insitu(nano)silver/polyvinyl alcohol membrane
- 1 August 2022
- Published by Pleiades Publishing Ltd in Russian Journal of Applied Chemistry
- Vol. 95 (8) , 1207-1217
Studies on Adsorption Isotherm and Adsorption Kinetics to Predict the Behavior of an Ionic Liquid Based Adsorbent in Desulfurization of Model Diesel
To tackle the concerns of high energy consumption during desulfurization of heterocyclic sulfur compounds from diesel via adsorption, catalytic oxidation, hydrodesulfurization and other techniques used by petroleum refineries, adsorption using an ionic liquid (IL) based adsorbent has been identified as a promising alternative. In this study, a synthesized IL based adsorbent was applied to adsorb heterocyclic sulfur compounds, viz. thiophene and dibenzothiophene, from a model diesel. A maximum of 98.81% desulfurization efficiency has been achieved after 60 min at a fixed feed to adsorbent (15 wt % IL loaded) ratio of 1 : 0.075. The adsorbent with no IL fitted Henry’s model of adsorption isotherm whereas adsorbent with 5 and 20 wt % IL loading followed standard Type-IV isotherm and adsorbent with 10 and 15 wt % loading agreed well with standard Type-III isotherm. 5, 10, 15, and 20 wt % loaded IL adsorbents best fitted with Freundlich, Jovanovich, Langmuir and Harkins–Jura isotherm, respectively. From adsorption kinetics study, it is inferred that 5 wt % loaded adsorbent followed Elovich model, 10% as well as 15% loaded adsorbents agreed well with pseudo 2nd order kinetics and 20% loaded adsorbent followed pseudo 1st order kinetics.
- 1 August 2022
- Published by Pleiades Publishing Ltd in Russian Journal of Applied Chemistry
- Vol. 95 (8) , 1207-1217
Studies on Adsorption Isotherm and Adsorption Kinetics to Predict the Behavior of an Ionic Liquid Based Adsorbent in Desulfurization of Model Diesel
To tackle the concerns of high energy consumption during desulfurization of heterocyclic sulfur compounds from diesel via adsorption, catalytic oxidation, hydrodesulfurization and other techniques used by petroleum refineries, adsorption using an ionic liquid (IL) based adsorbent has been identified as a promising alternative. In this study, a synthesized IL based adsorbent was applied to adsorb heterocyclic sulfur compounds, viz. thiophene and dibenzothiophene, from a model diesel. A maximum of 98.81% desulfurization efficiency has been achieved after 60 min at a fixed feed to adsorbent (15 wt % IL loaded) ratio of 1 : 0.075. The adsorbent with no IL fitted Henry’s model of adsorption isotherm whereas adsorbent with 5 and 20 wt % IL loading followed standard Type-IV isotherm and adsorbent with 10 and 15 wt % loading agreed well with standard Type-III isotherm. 5, 10, 15, and 20 wt % loaded IL adsorbents best fitted with Freundlich, Jovanovich, Langmuir and Harkins–Jura isotherm, respectively. From adsorption kinetics study, it is inferred that 5 wt % loaded adsorbent followed Elovich model, 10% as well as 15% loaded adsorbents agreed well with pseudo 2nd order kinetics and 20% loaded adsorbent followed pseudo 1st order kinetics.
- 10 March 2022
- Published by Taylor & Francis in Soft Materials
- Vol. 20 (3) , 344-357
Immobilization of acetate based ionic liquids on silica gel to fabricate a prospective desulfurizing adsorbent
Ionic liquids have the potential to play a significant role in mitigating the critical challenge of refractory sulfur removal from diesel. In the present investigation, a mixture of imidazolium, pyrazolium and triazolium acetate -based ionic liquids has been immobilized on silica gel using sol-gel technology at ambient temperature (25°C), yielding a novel adsorbent. The sol-gel processing route has been elucidated by Dynamic Light Scattering (DLS) and rheology study. The fabricated adsorbent has been characterized by Fourier Transfer Infra-red (FTIR) spectroscopy, X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The results reveal that the ionic liquids have been immobilized in the silica gel support. This adsorbent has been successfully applied to remove heterocyclic sulfur compounds from model diesel containing thiophene and dibenzothiophene. The highest desulfurization efficiencies achieved for thiophene and dibenzothiophene removal are 98.31 and 99.29% respectively, using an adsorbent with 15% ionic liquid loading, model diesel: adsorbent ratio of 1:0.075, an adsorption time of 60 minutes at 25°C. The system under investigation followed the Langmuir isotherm model and the adsorption performance best fitted with the Ho’s pseudo second-order kinetics.
- 10 March 2022
- Published by Taylor & Francis in Soft Materials
- Vol. 20 (3) , 344-357
Immobilization of acetate based ionic liquids on silica gel to fabricate a prospective desulfurizing adsorbent
Ionic liquids have the potential to play a significant role in mitigating the critical challenge of refractory sulfur removal from diesel. In the present investigation, a mixture of imidazolium, pyrazolium and triazolium acetate -based ionic liquids has been immobilized on silica gel using sol-gel technology at ambient temperature (25°C), yielding a novel adsorbent. The sol-gel processing route has been elucidated by Dynamic Light Scattering (DLS) and rheology study. The fabricated adsorbent has been characterized by Fourier Transfer Infra-red (FTIR) spectroscopy, X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The results reveal that the ionic liquids have been immobilized in the silica gel support. This adsorbent has been successfully applied to remove heterocyclic sulfur compounds from model diesel containing thiophene and dibenzothiophene. The highest desulfurization efficiencies achieved for thiophene and dibenzothiophene removal are 98.31 and 99.29% respectively, using an adsorbent with 15% ionic liquid loading, model diesel: adsorbent ratio of 1:0.075, an adsorption time of 60 minutes at 25°C. The system under investigation followed the Langmuir isotherm model and the adsorption performance best fitted with the Ho’s pseudo second-order kinetics.
- 10 November 2021
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 56 (13) , 1397-1408
Studies on sorption kinetics and sorption isotherm for pervaporative separation of benzene from model pyrolysis gasoline using insitu nano silver/polyvinyl alcohol membrane
Pyrolysis gasoline (Py gas) is used as an octane enhancer of gasoline as it is rich in aromatics. However, removal of carcinogenic benzene from Py gas before blending with gasoline is important to meet the fuel specifications. The main focus of this present study is to determine the sorption kinetics and sorption isotherm of a fabricated insitu nano silver/polyvinyl alcohol (insitu nano Ag/PVA) membrane for pervaporative separation of benzene from model Py gas [mixture of benzene (aromatic) and 1-octene (aliphatic)]. The thickness, surface morphological structure (Atomic Force Microscopy) and degree of swelling of the fabricated membrane were determined. The highest pervaporation separation index achieved for the selected system was 14.259 kg/m2/h at 303 K, with 30 volume% benzene in model Py gas using a downstream pressure of 1 mm of Hg. The sorption kinetics of benzene in insitu nano Ag/PVA membrane obeyed the Elovich model while the Temkin isotherm model fitted the experimental data of the chosen system most accurately.
- 10 November 2021
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 56 (13) , 1397-1408
Studies on sorption kinetics and sorption isotherm for pervaporative separation of benzene from model pyrolysis gasoline using insitu nano silver/polyvinyl alcohol membrane
Pyrolysis gasoline (Py gas) is used as an octane enhancer of gasoline as it is rich in aromatics. However, removal of carcinogenic benzene from Py gas before blending with gasoline is important to meet the fuel specifications. The main focus of this present study is to determine the sorption kinetics and sorption isotherm of a fabricated insitu nano silver/polyvinyl alcohol (insitu nano Ag/PVA) membrane for pervaporative separation of benzene from model Py gas [mixture of benzene (aromatic) and 1-octene (aliphatic)]. The thickness, surface morphological structure (Atomic Force Microscopy) and degree of swelling of the fabricated membrane were determined. The highest pervaporation separation index achieved for the selected system was 14.259 kg/m2/h at 303 K, with 30 volume% benzene in model Py gas using a downstream pressure of 1 mm of Hg. The sorption kinetics of benzene in insitu nano Ag/PVA membrane obeyed the Elovich model while the Temkin isotherm model fitted the experimental data of the chosen system most accurately.
- 17 August 2021
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 10457-10468
Non-catalytic desulfurization of model diesel using synthesized biodegradable ionic liquid
The conventional processes generally used by petroleum refineries for eradication of sulfur compounds from diesel, namely, diesel hydrotreating is associated with the problem of high cost in terms of energy consumption, catalyst regeneration, etc. The present work has spotted a diesel desulfurization process at ambient temperature (25°C) without using any catalyst. Solvent extraction was applied to eliminate heterocyclic sulfur compounds from model diesel using a novel ionic liquid, which was synthesized from basic raw materials and characterized by common techniques like Fourier Transform Infrared (FTIR) spectroscopy and Nuclear Magnetic Resonance (NMR) spectroscopy. A preliminary biodegradation study of the synthesized ionic liquid revealed 49.98% biodegradability after 35 days. The compounds present in the synthesized ionic liquid are 1,3-diethyl-1H-1,2,3-triazol-3-ium acetate ([Etim][OAc]), 1,3-diethyl-1H-imidazol-3-ium ([Eiim][OAc]), and 1-ethyl-3-methyl-3H-pyrazol-1-ium acetate ([EMpim][OAc]). The maximum desulfurization efficiency was 99.09% for dibenzothiophene (DBT) and 97.94% for thiophene using a solvent to feed ratio of 1:1 and applying a stirring time of 60 minutes. The quality of the model diesel has been checked with respect to flash point, aniline point, diesel index, and cetane index both pre- and post-desulfurization.
- 17 August 2021
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 10457-10468
Non-catalytic desulfurization of model diesel using synthesized biodegradable ionic liquid
The conventional processes generally used by petroleum refineries for eradication of sulfur compounds from diesel, namely, diesel hydrotreating is associated with the problem of high cost in terms of energy consumption, catalyst regeneration, etc. The present work has spotted a diesel desulfurization process at ambient temperature (25°C) without using any catalyst. Solvent extraction was applied to eliminate heterocyclic sulfur compounds from model diesel using a novel ionic liquid, which was synthesized from basic raw materials and characterized by common techniques like Fourier Transform Infrared (FTIR) spectroscopy and Nuclear Magnetic Resonance (NMR) spectroscopy. A preliminary biodegradation study of the synthesized ionic liquid revealed 49.98% biodegradability after 35 days. The compounds present in the synthesized ionic liquid are 1,3-diethyl-1H-1,2,3-triazol-3-ium acetate ([Etim][OAc]), 1,3-diethyl-1H-imidazol-3-ium ([Eiim][OAc]), and 1-ethyl-3-methyl-3H-pyrazol-1-ium acetate ([EMpim][OAc]). The maximum desulfurization efficiency was 99.09% for dibenzothiophene (DBT) and 97.94% for thiophene using a solvent to feed ratio of 1:1 and applying a stirring time of 60 minutes. The quality of the model diesel has been checked with respect to flash point, aniline point, diesel index, and cetane index both pre- and post-desulfurization.
- 7 January 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (2) , 567-581
Influence of chlorite treatment on the fine structure of alkali pretreated sugarcane bagasse
- 7 January 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (2) , 567-581
Influence of chlorite treatment on the fine structure of alkali pretreated sugarcane bagasse
- 10 July 2018
- Published by Springer Nature in Chemical Papers
- Vol. 72 (12) , 3141-3157
Separation of benzo[a]pyrene and n-tetradecane mixtures using pervaporation technique and optimization
- 10 July 2018
- Published by Springer Nature in Chemical Papers
- Vol. 72 (12) , 3141-3157
Separation of benzo[a]pyrene and n-tetradecane mixtures using pervaporation technique and optimization