Yongzheng Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yongzheng Wen has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Ji Zhou
Tsinghua University
14 shared publications Chen Wang
State Key Laboratory of New Ceramic Materials, School of Materials Science and Engineering
10 shared publicationsJingbo Sun
State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Beijing China
9 shared publicationsYong Tan
State Key Laboratory of New Ceramic Materials, School of Materials Science and Engineering
9 shared publicationsShiqiang Zhao
State Key Laboratory of New Ceramic Materials, School of Materials Science and Engineering
8 shared publicationsJi Zhou
7 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (10)
Artificial core–shell cofired architectures for high-performance microwave dielectric ceramics
The rapid advancement of 5G/6G communication technologies imposes ever-increasing demands on microwave dielectric ceramics (MWDCs). However, it remains challenging to simultaneously achieve good temperature stability and high Q×f values. Metamaterials with artificially designed structures exhibit extraordinary properties, and metamaterialogy holds great potential for advancing conventional materials. Inspired by this paradigm, an artificial core–shell cofired architecture was designed to realize high-performance MWDCs. The architecture employed the Zn1.01Nb2O6 (ZNO) matrix as the shell and positive temperature coefficient of resonant frequency (τf) compensators, including TiO2 (TO), CaTiO3 (CTO), or SrTiO3 (STO), in either green or presintered states, as cores. The τf values of all the core–shell samples were effectively tuned to near zero, while high Q×f values were retained. Specifically, the ZNO–TO core–shell ceramic with a 1.43 wt% presintered TO core exhibited εr ≈ 25.32, Q×f ≈ 119,100 GHz, and τf ≈ −4.8 ppm/°C, while the temperature-stable counterparts using the CTO or STO cores retained Q×f ≥ 67,800 GHz. Furthermore, high frequency structure simulator (HFSS) simulation of a cylindrical dielectric resonator antenna (CDRA) based on the optimized ZNO–TO core–shell ceramic predicted favorable impedance matching (voltage standing wave ratio (VSWR) ≈ 1.015), radiation efficiency above 90%, and a peak realized gain of 6.13 dBi at 4.31 GHz. This preliminarily demonstrates the feasibility of CDRA applications. The artificial core–shell architecture provides a general strategy for synergistically optimizing microwave dielectric properties by tailoring the electric field participation and confining heterogeneous interfacial reactions, which is beneficial for developing the high-performance MWDCs required for next-generation communication technologies.
- 20 October 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (10)
Open AccessArtificial core–shell cofired architectures for high-performance microwave dielectric ceramics
The rapid advancement of 5G/6G communication technologies imposes ever-increasing demands on microwave dielectric ceramics (MWDCs). However, it remains challenging to simultaneously achieve good temperature stability and high Q×f values. Metamaterials with artificially designed structures exhibit extraordinary properties, and metamaterialogy holds great potential for advancing conventional materials. Inspired by this paradigm, an artificial core–shell cofired architecture was designed to realize high-performance MWDCs. The architecture employed the Zn1.01Nb2O6 (ZNO) matrix as the shell and positive temperature coefficient of resonant frequency (τf) compensators, including TiO2 (TO), CaTiO3 (CTO), or SrTiO3 (STO), in either green or presintered states, as cores. The τf values of all the core–shell samples were effectively tuned to near zero, while high Q×f values were retained. Specifically, the ZNO–TO core–shell ceramic with a 1.43 wt% presintered TO core exhibited εr ≈ 25.32, Q×f ≈ 119,100 GHz, and τf ≈ −4.8 ppm/°C, while the temperature-stable counterparts using the CTO or STO cores retained Q×f ≥ 67,800 GHz. Furthermore, high frequency structure simulator (HFSS) simulation of a cylindrical dielectric resonator antenna (CDRA) based on the optimized ZNO–TO core–shell ceramic predicted favorable impedance matching (voltage standing wave ratio (VSWR) ≈ 1.015), radiation efficiency above 90%, and a peak realized gain of 6.13 dBi at 4.31 GHz. This preliminarily demonstrates the feasibility of CDRA applications. The artificial core–shell architecture provides a general strategy for synergistically optimizing microwave dielectric properties by tailoring the electric field participation and confining heterogeneous interfacial reactions, which is beneficial for developing the high-performance MWDCs required for next-generation communication technologies.
- 1 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 47943-47952
Control of Electronic Properties of Organic–Inorganic MXenes via Surface Functionalization
Surface terminations critically affect the electronic structure of two-dimensional (2D) transition metal carbides and nitrides (MXenes), yet the synthetic exploration has been hindered by the lack of predictive factors. Here, we establish that the number of lone-pair electrons (LPEs) on an organic ligand serves as a key factor governing the synthesis of organic-inorganic hybrid MXenes. Experimentally, successful surface functionalization is strongly dominated by 3-LPE ligands, enabling the synthesis of a broad library of over 20 distinct organically terminated MXenes (OT-MXenes). DFT calculations on representative experimentally realized terminations further show that the investigated 3-LPE ligands preferentially stabilize highly coordinated FCC configurations, providing a microscopic connection between LPE availability, surface coordination, and the experimentally observed functionalization behavior. Remarkably, organic surface termination enables the intrinsic carrier density of MXenes to be tuned over 7-8 orders of magnitude. This unprecedented level of control provides access to the intrinsically high carrier mobility in the low-carrier-density regime. In particular, hexanamide-terminated Ti3C2 exhibits an electron mobility of ∼48 cm2 V–1 s–1, representing an improvement of more than two orders of magnitude compared to metallic Ti3C2Tx. Our work clarifies a fundamental design principle for MXene surface engineering, which may guide the precise synthesis of organic-inorganic hybrid MXenes with tailored terminations and properties, thereby promoting MXene device applications and advancing the development of organic-inorganic 2D materials.
- 1 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 47943-47952
Control of Electronic Properties of Organic–Inorganic MXenes via Surface Functionalization
Surface terminations critically affect the electronic structure of two-dimensional (2D) transition metal carbides and nitrides (MXenes), yet the synthetic exploration has been hindered by the lack of predictive factors. Here, we establish that the number of lone-pair electrons (LPEs) on an organic ligand serves as a key factor governing the synthesis of organic-inorganic hybrid MXenes. Experimentally, successful surface functionalization is strongly dominated by 3-LPE ligands, enabling the synthesis of a broad library of over 20 distinct organically terminated MXenes (OT-MXenes). DFT calculations on representative experimentally realized terminations further show that the investigated 3-LPE ligands preferentially stabilize highly coordinated FCC configurations, providing a microscopic connection between LPE availability, surface coordination, and the experimentally observed functionalization behavior. Remarkably, organic surface termination enables the intrinsic carrier density of MXenes to be tuned over 7-8 orders of magnitude. This unprecedented level of control provides access to the intrinsically high carrier mobility in the low-carrier-density regime. In particular, hexanamide-terminated Ti3C2 exhibits an electron mobility of ∼48 cm2 V–1 s–1, representing an improvement of more than two orders of magnitude compared to metallic Ti3C2Tx. Our work clarifies a fundamental design principle for MXene surface engineering, which may guide the precise synthesis of organic-inorganic hybrid MXenes with tailored terminations and properties, thereby promoting MXene device applications and advancing the development of organic-inorganic 2D materials.
- Open Access
- 7 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (60) , e76954
Giant Magnetic Purcell Effect Induced by High‐Order Mie Resonances
The Purcell effect provides an effective route for tailoring light–matter interactions. However, efficient enhancement of magnetic dipole transitions remains challenging because magnetic light–matter coupling is intrinsically weak and strongly outcompeted by dominant electric dipole channels. Here we exploit high‐order Mie resonances supported by low‐loss TiO 2 spheres to selectively enhance magnetic dipole emission from Eu 3+ emitters. Numerical analysis shows that the coupling between a point emitter and Mie resonance increases with the resonance order, while the low optical loss of TiO 2 enables near‐field Purcell enhancement to be converted into observable far‐field radiation. We further develop a surface‐grafting strategy that positions Eu 3+ emitters within ∼2 nm of the sphere surface to maximize emitter–resonator coupling. Using single‐particle spectroscopy and a magnetic 32‐pole Mie resonance, we achieve a ∼8.7‐fold enhancement of the magnetic dipole transition branching ratio of Eu 3+ ions, accompanied by an ∼38.1‐fold increase in the magnetic dipole decay rate. Our findings not only extend Mie‐tronics as a promising platform for manipulating light generation but also provide a versatile strategy for magnetic‐field‐driven nanophotonic functionalities.
- 7 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (60) , e76954
Open AccessGiant Magnetic Purcell Effect Induced by High‐Order Mie Resonances
The Purcell effect provides an effective route for tailoring light–matter interactions. However, efficient enhancement of magnetic dipole transitions remains challenging because magnetic light–matter coupling is intrinsically weak and strongly outcompeted by dominant electric dipole channels. Here we exploit high‐order Mie resonances supported by low‐loss TiO 2 spheres to selectively enhance magnetic dipole emission from Eu 3+ emitters. Numerical analysis shows that the coupling between a point emitter and Mie resonance increases with the resonance order, while the low optical loss of TiO 2 enables near‐field Purcell enhancement to be converted into observable far‐field radiation. We further develop a surface‐grafting strategy that positions Eu 3+ emitters within ∼2 nm of the sphere surface to maximize emitter–resonator coupling. Using single‐particle spectroscopy and a magnetic 32‐pole Mie resonance, we achieve a ∼8.7‐fold enhancement of the magnetic dipole transition branching ratio of Eu 3+ ions, accompanied by an ∼38.1‐fold increase in the magnetic dipole decay rate. Our findings not only extend Mie‐tronics as a promising platform for manipulating light generation but also provide a versatile strategy for magnetic‐field‐driven nanophotonic functionalities.
- 13 May 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (11) , 3102-3108
Ultrabroadband Terahertz Coherent Detection with Organic Polymeric Materials
- 13 May 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (11) , 3102-3108
Ultrabroadband Terahertz Coherent Detection with Organic Polymeric Materials
- 30 April 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12242-12250
Angularly robust terahertz third-harmonic generation empowered by all-dielectric nonlocal metasurfaces
Nonlocal resonances enabled by Brillouin zone folding in all-dielectric metasurfaces boost terahertz third-harmonic generation, which remains strong over wide incident angles, overcoming the angular sensitivity of conventional BICs.
- 30 April 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12242-12250
Angularly robust terahertz third-harmonic generation empowered by all-dielectric nonlocal metasurfaces
Nonlocal resonances enabled by Brillouin zone folding in all-dielectric metasurfaces boost terahertz third-harmonic generation, which remains strong over wide incident angles, overcoming the angular sensitivity of conventional BICs.
- Open Access
- 5 March 2026
- Published by OAE Publishing Inc. in Microstructures
- Vol. 6 (2)
Electrically tunable transmissive dielectric metamaterial based on SrTiO 3 Mie resonators
Metamaterials have become an important strategy for enhancing electromagnetic wave transmission, and the realization of transmission tunability has attracted considerable attention in current scientific research. In this study, we propose a transmissive metamaterial consisting of periodically arranged SrTiO3 ceramic particles array and metallic grid array. Taking advantage of the Mie resonance of the dielectric particle array, the dispersion characteristics at the interface are precisely tailored, resulting in high transmission in the microwave frequency range. Furthermore, the temperature-sensitive permittivity of SrTiO3 enables dynamic tuning of the transparency window toward higher frequencies through electrically induced thermal modulation. Both the selective high-transmissive performance and electrical tunability are validated through numerical simulations and experimental measurements. This work provides a convenient route to design tunable metamaterials, offering fascinating possibilities for the development of active microwave windows.
- 5 March 2026
- Published by OAE Publishing Inc. in Microstructures
- Vol. 6 (2)
Open AccessElectrically tunable transmissive dielectric metamaterial based on SrTiO 3 Mie resonators
Metamaterials have become an important strategy for enhancing electromagnetic wave transmission, and the realization of transmission tunability has attracted considerable attention in current scientific research. In this study, we propose a transmissive metamaterial consisting of periodically arranged SrTiO3 ceramic particles array and metallic grid array. Taking advantage of the Mie resonance of the dielectric particle array, the dispersion characteristics at the interface are precisely tailored, resulting in high transmission in the microwave frequency range. Furthermore, the temperature-sensitive permittivity of SrTiO3 enables dynamic tuning of the transparency window toward higher frequencies through electrically induced thermal modulation. Both the selective high-transmissive performance and electrical tunability are validated through numerical simulations and experimental measurements. This work provides a convenient route to design tunable metamaterials, offering fascinating possibilities for the development of active microwave windows.
- Open Access
- 12 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 773
Experimental Demonstration of Airborne Virtual Hyperbolic Metamaterials for Radar Signal Guiding
The inherent diffraction of electromagnetic waves, such as shortwaves and microwaves, severely limits the effective signal transmission distance, thereby constraining the development of related applications like radar and communications. This work experimentally demonstrates the use of a virtual hyperbolic metamaterial (VHMM) realized via a plasma filament array induced in air by a femtosecond laser. We characterize the ability of this VHMM to control electromagnetic waves in the shortwave and microwave bands, particularly its guiding and collimating effects. By combining experimental measurements with effective medium theory, we confirm that under specific parameters, the principal diagonal components of the permittivity tensor for the plasma array exhibit opposite signs, manifesting typical hyperbolic dispersion characteristics which enable the guiding of electromagnetic waves. This research provides a feasible approach for utilizing lasers to create dynamically reconfigurable and non-physical structures in free space for manipulating long-wavelength electromagnetic radiation, demonstrating potential for applications in areas such as radar, communications, and remote sensing.
- 12 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 773
Open AccessExperimental Demonstration of Airborne Virtual Hyperbolic Metamaterials for Radar Signal Guiding
The inherent diffraction of electromagnetic waves, such as shortwaves and microwaves, severely limits the effective signal transmission distance, thereby constraining the development of related applications like radar and communications. This work experimentally demonstrates the use of a virtual hyperbolic metamaterial (VHMM) realized via a plasma filament array induced in air by a femtosecond laser. We characterize the ability of this VHMM to control electromagnetic waves in the shortwave and microwave bands, particularly its guiding and collimating effects. By combining experimental measurements with effective medium theory, we confirm that under specific parameters, the principal diagonal components of the permittivity tensor for the plasma array exhibit opposite signs, manifesting typical hyperbolic dispersion characteristics which enable the guiding of electromagnetic waves. This research provides a feasible approach for utilizing lasers to create dynamically reconfigurable and non-physical structures in free space for manipulating long-wavelength electromagnetic radiation, demonstrating potential for applications in areas such as radar, communications, and remote sensing.
- 8 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (50) , 42497-42505
Multioctave Terahertz Frequency Synthesis via Simultaneous Excitations of Intrinsic and Extrinsic Nonlinearities in Metasurfaces
The advancements of terahertz (THz) technologies for high-speed wireless communication and high-resolution radar systems are fundamentally constrained by the lack of efficient, compact, and broadband THz sources. Frequency synthesis via nonlinear conversion offers a compelling route for generating multiple THz frequencies from one or two fixed inputs, but its practical implementation is limited by the scarcity of nonlinear materials with strong responses at THz frequencies. Here, we demonstrated the process of THz frequency synthesis in metasurfaces, generating multiple discrete THz frequency lines with multioctave broadband coverage. The metasurface enables the simultaneous excitations of intrinsic third-order and extrinsic second-order nonlinearities, respectively arising from the inherent nonlinear responses of the materials and from magnetoelectric coupling induced by the resonant behavior of the metasurface. These dual nonlinear interactions facilitate the co-occurrence of five distinct processes: second- and third-harmonic generation, sum- and difference-frequency generation, and four-wave mixing. As a result, the metasurface generates 10 discrete THz frequencies spanning a 13-fold spectral range from 0.3 to 3.9 THz, corresponding to 3.7 octaves, with only two frequency inputs. This work provides a scalable and integrable approach to ultrabroadband, frequency-agile THz sources and nonlinear devices.
- 8 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (50) , 42497-42505
Multioctave Terahertz Frequency Synthesis via Simultaneous Excitations of Intrinsic and Extrinsic Nonlinearities in Metasurfaces
The advancements of terahertz (THz) technologies for high-speed wireless communication and high-resolution radar systems are fundamentally constrained by the lack of efficient, compact, and broadband THz sources. Frequency synthesis via nonlinear conversion offers a compelling route for generating multiple THz frequencies from one or two fixed inputs, but its practical implementation is limited by the scarcity of nonlinear materials with strong responses at THz frequencies. Here, we demonstrated the process of THz frequency synthesis in metasurfaces, generating multiple discrete THz frequency lines with multioctave broadband coverage. The metasurface enables the simultaneous excitations of intrinsic third-order and extrinsic second-order nonlinearities, respectively arising from the inherent nonlinear responses of the materials and from magnetoelectric coupling induced by the resonant behavior of the metasurface. These dual nonlinear interactions facilitate the co-occurrence of five distinct processes: second- and third-harmonic generation, sum- and difference-frequency generation, and four-wave mixing. As a result, the metasurface generates 10 discrete THz frequencies spanning a 13-fold spectral range from 0.3 to 3.9 THz, corresponding to 3.7 octaves, with only two frequency inputs. This work provides a scalable and integrable approach to ultrabroadband, frequency-agile THz sources and nonlinear devices.
- Open Access
- 5 December 2025
- Published by Science China Press., Co. Ltd. in National Science Open
- Vol. 5 (1)
Ultrafast control of terahertz harmonic generation by optically modulating carrier dynamics in nonlinear metasurfaces
The development of terahertz (THz) sources with wide spectral coverage and dynamic control is critical for advancing high-speed communication, high-resolution imaging, and reconfigurable photonics. However, conventional nonlinear materials exhibit weak harmonic responses and limited tunability at room temperature. Here, we propose a nonlinear THz metasurface that simultaneously enables generation and optical modulation of both second and third harmonics with ultrafast switching speeds. The metasurface locally enhances THz magnetic and electric fields, which drive photoinduced carriers into anharmonic oscillations and produce harmonic emissions. Owing to the rapid excitations of free carriers, we achieve the modulation of SHG and THG with switching times of 4.31 ps and 3.98 ps, respectively, and their extinction ratios exceed 1000. Moreover, tuning the optical pump fluence enables amplitude modulation of harmonic outputs by dynamically manipulating carrier density and mobility. This single-device approach demonstrates a unified platform for generating, enhancing, and dynamically controlling multiple THz harmonics, offering new opportunities for reconfigurable THz sources and adaptive nonlinear photonic devices.
- 5 December 2025
- Published by Science China Press., Co. Ltd. in National Science Open
- Vol. 5 (1)
Open AccessUltrafast control of terahertz harmonic generation by optically modulating carrier dynamics in nonlinear metasurfaces
The development of terahertz (THz) sources with wide spectral coverage and dynamic control is critical for advancing high-speed communication, high-resolution imaging, and reconfigurable photonics. However, conventional nonlinear materials exhibit weak harmonic responses and limited tunability at room temperature. Here, we propose a nonlinear THz metasurface that simultaneously enables generation and optical modulation of both second and third harmonics with ultrafast switching speeds. The metasurface locally enhances THz magnetic and electric fields, which drive photoinduced carriers into anharmonic oscillations and produce harmonic emissions. Owing to the rapid excitations of free carriers, we achieve the modulation of SHG and THG with switching times of 4.31 ps and 3.98 ps, respectively, and their extinction ratios exceed 1000. Moreover, tuning the optical pump fluence enables amplitude modulation of harmonic outputs by dynamically manipulating carrier density and mobility. This single-device approach demonstrates a unified platform for generating, enhancing, and dynamically controlling multiple THz harmonics, offering new opportunities for reconfigurable THz sources and adaptive nonlinear photonic devices.
- Open Access
Photoinduced giant modulation of terahertz nonlinearity from metasurfaces
Active control of optical nonlinearity is essential for advancing next-generation electronics and photonics, including high-speed wireless communications, optical information processing, and nonlinear signal manipulation. However, achieving tunable nonlinearity at terahertz (THz) frequencies faces significant challenges due to the lack of materials that combine high nonlinear responses with strong sensitivity to external stimuli in this spectral regime. Here, we show giant modulation of THz nonlinearity by optically tailoring the valley degree of freedom in semiconductor-based metasurfaces. Mediated by the resonant behaviors of metasurfaces, photoexcited electrons transition into different valleys in the conduction band in response to the driving THz field, with the transition rate controlled by light intensity. Since THz nonlinearities vary significantly with electron dynamics in different valleys, various nonlinear effects-such as nonlinear transmission and generation-can be efficiently enhanced and modulated within a single metasurface using weak optical pumping. With optical energy as low as a few picojoules, we achieve on-off switching of THz third harmonic generation with a modulation depth exceeding 20000%, along with effective tunability of its nonperturbative behaviors. Our approach breaks new ground in active THz devices fully compatible with semiconductor industry standards, indicating a promising building block for ultrafast THz signal processing, all-optical computing, and nonlinear optical elements.
Open AccessPhotoinduced giant modulation of terahertz nonlinearity from metasurfaces
Active control of optical nonlinearity is essential for advancing next-generation electronics and photonics, including high-speed wireless communications, optical information processing, and nonlinear signal manipulation. However, achieving tunable nonlinearity at terahertz (THz) frequencies faces significant challenges due to the lack of materials that combine high nonlinear responses with strong sensitivity to external stimuli in this spectral regime. Here, we show giant modulation of THz nonlinearity by optically tailoring the valley degree of freedom in semiconductor-based metasurfaces. Mediated by the resonant behaviors of metasurfaces, photoexcited electrons transition into different valleys in the conduction band in response to the driving THz field, with the transition rate controlled by light intensity. Since THz nonlinearities vary significantly with electron dynamics in different valleys, various nonlinear effects-such as nonlinear transmission and generation-can be efficiently enhanced and modulated within a single metasurface using weak optical pumping. With optical energy as low as a few picojoules, we achieve on-off switching of THz third harmonic generation with a modulation depth exceeding 20000%, along with effective tunability of its nonperturbative behaviors. Our approach breaks new ground in active THz devices fully compatible with semiconductor industry standards, indicating a promising building block for ultrafast THz signal processing, all-optical computing, and nonlinear optical elements.