Xinde Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xinde Tang has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
Fuying Dong
School of Civil Engineering Shandong Jiaotong University Jinan China
12 shared publicationsLaixue Pang
School of Civil Engineering Shandong Jiaotong University Jinan China
9 shared publications- Meishan Pei
School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022, China
9 shared publications Faqi Yu
School of Chemistry and Chemical Engineering
7 shared publicationsTieshi Wang
School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
7 shared publicationsWenjuan Guo
School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
6 shared publications
Latest Publications
- 9 October 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (4)
Dopamine‐Assisted Rapid Construction of Zwitterionic Polymeric Coating for Improved Antifouling and Bactericidal Properties
With the escalating challenges of biological contamination, surface modification technology has become a promising strategy to develop multifunctional materials. Antifouling coatings based on zwitterionic/quaternary ammonium polymers have been widely applied in medical, chemical, and marine antifouling fields due to their excellent biological inertness and remarkable antifouling and bactericidal properties. However, the limited adhesion of these coatings to substrate surfaces significantly restricts their application. An ideal antifouling and bactericidal coating should not only exhibit high antifouling and bactericidal efficiency but also form robust interfacial bonds with the substrate. Mussel‐inspired dopamine (DA) functional polymers with superior adhesion and multi‐functionality have been extensively studied and applied in fields such as bio‐adhesives, surface modification, and biomedicine. One‐step co‐deposition of PDA with antifouling polymers, especially zwitterionic polymers, has been considered as a promising strategy for fabricating antifouling surfaces. However, the key challenge lies in the slow co‐deposition process, which typically requires 10 h or even longer. In this work, a rapid, stable, and universal method utilizing CuSO 4 and H 2 O 2 to catalyze the co‐deposition of DA and zwitterionic polymer was proposed, which enables the formation of a stable coating within 45 min. The copolymer of glycidyl methacrylate (GMA), [2‐(methacryloyloxy) ethyl] dimethyl‐(3‐sulfopropyl) ammonium hydroxide (DMAPS), and [2‐(methacryloyloxy) ethyl] trimethylammonium chloride solution (DMC) (P(GMA‐ co ‐DMAPS‐ co ‐DMC)) developed in this study achieves synergistic antifouling and bactericidal effects through a simple and efficient grafting method, demonstrating significant potential for biomedical and industrial applications. The results demonstrate that the grafted coating exhibits excellent anti‐protein adsorption performance (over 90%) as well as significant bactericidal performance, with the inactivation rates of 99.9% and 97.7% against Staphylococcus aureus and Escherichia coli , respectively. Additionally, the coating exhibits strong adhesion to the substrate, further validating its practical application. New insights and methods will be provided for the development of high‐performance antifouling and bactericidal coatings.
- 9 October 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (4)
Dopamine‐Assisted Rapid Construction of Zwitterionic Polymeric Coating for Improved Antifouling and Bactericidal Properties
With the escalating challenges of biological contamination, surface modification technology has become a promising strategy to develop multifunctional materials. Antifouling coatings based on zwitterionic/quaternary ammonium polymers have been widely applied in medical, chemical, and marine antifouling fields due to their excellent biological inertness and remarkable antifouling and bactericidal properties. However, the limited adhesion of these coatings to substrate surfaces significantly restricts their application. An ideal antifouling and bactericidal coating should not only exhibit high antifouling and bactericidal efficiency but also form robust interfacial bonds with the substrate. Mussel‐inspired dopamine (DA) functional polymers with superior adhesion and multi‐functionality have been extensively studied and applied in fields such as bio‐adhesives, surface modification, and biomedicine. One‐step co‐deposition of PDA with antifouling polymers, especially zwitterionic polymers, has been considered as a promising strategy for fabricating antifouling surfaces. However, the key challenge lies in the slow co‐deposition process, which typically requires 10 h or even longer. In this work, a rapid, stable, and universal method utilizing CuSO 4 and H 2 O 2 to catalyze the co‐deposition of DA and zwitterionic polymer was proposed, which enables the formation of a stable coating within 45 min. The copolymer of glycidyl methacrylate (GMA), [2‐(methacryloyloxy) ethyl] dimethyl‐(3‐sulfopropyl) ammonium hydroxide (DMAPS), and [2‐(methacryloyloxy) ethyl] trimethylammonium chloride solution (DMC) (P(GMA‐ co ‐DMAPS‐ co ‐DMC)) developed in this study achieves synergistic antifouling and bactericidal effects through a simple and efficient grafting method, demonstrating significant potential for biomedical and industrial applications. The results demonstrate that the grafted coating exhibits excellent anti‐protein adsorption performance (over 90%) as well as significant bactericidal performance, with the inactivation rates of 99.9% and 97.7% against Staphylococcus aureus and Escherichia coli , respectively. Additionally, the coating exhibits strong adhesion to the substrate, further validating its practical application. New insights and methods will be provided for the development of high‐performance antifouling and bactericidal coatings.
- 5 September 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (1)
Polycarboxylate Superplasticizers With Low Sensitivity to Clay via RAFT Polymerization
Clay rapidly adsorbs polycarboxylate superplasticizers (PCEs), reducing effective dispersant concentration in cement slurries. In this work, using ethylene glycol monovinyl polyethylene glycol ether (EPEG) and acrylic acid (AA) as the main raw materials, three cationic functional PCEs (RPCEs: RPCE‐A, RPCE‐D, RPCE‐S) with enhanced clay tolerance were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. These PCEs were characterized by FTIR, 1 H NMR, and GPC. The polydispersity index of RPCEs (1.24–1.27) indicated the character of living/controlled polymerization. Compared with the conventional PCEs, RPCEs can significantly enhance the fluidity of cement paste, and the fluidity retention can reach fine stability even when the clay occupies 0.5 wt.% of cement. X‐ray diffraction and fluidity analysis show that, unlike the conventional PCEs, RPCEs can enter the clay layers through side‐chain intercalation and ion exchange, resulting in an increase in layer spacing. This approach can open an avenue for broadening the application and increasing the adaptability of PCEs.
- 5 September 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (1)
Polycarboxylate Superplasticizers With Low Sensitivity to Clay via RAFT Polymerization
Clay rapidly adsorbs polycarboxylate superplasticizers (PCEs), reducing effective dispersant concentration in cement slurries. In this work, using ethylene glycol monovinyl polyethylene glycol ether (EPEG) and acrylic acid (AA) as the main raw materials, three cationic functional PCEs (RPCEs: RPCE‐A, RPCE‐D, RPCE‐S) with enhanced clay tolerance were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. These PCEs were characterized by FTIR, 1 H NMR, and GPC. The polydispersity index of RPCEs (1.24–1.27) indicated the character of living/controlled polymerization. Compared with the conventional PCEs, RPCEs can significantly enhance the fluidity of cement paste, and the fluidity retention can reach fine stability even when the clay occupies 0.5 wt.% of cement. X‐ray diffraction and fluidity analysis show that, unlike the conventional PCEs, RPCEs can enter the clay layers through side‐chain intercalation and ion exchange, resulting in an increase in layer spacing. This approach can open an avenue for broadening the application and increasing the adaptability of PCEs.
- 1 August 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (45)
Sodium Lignosulfonate‐Based Emulsifiers for Asphalt Emulsion
Emulsified asphalt is a critical component of low‐temperature pavement materials and plays a pivotal role in determining the durability of asphalt mixtures. Lignosulfonate, with advantages such as facile preparation, environmental friendliness, recyclability, and energy conservation, has been used in various fields, but the insufficient emulsifying capacity limits its application as an emulsifier for asphalt. To meet the needs of emulsified asphalt as pavement materials, the modification of sodium lignosulfonate (SL) was conducted by graft copolymerization and the Mannich reaction, resulting in two kinds of emulsifiers with high performance for asphalt emulsion. The optimal conditions for both modification processes were thoroughly examined by using ductility as the key indicator. The molecular composition and structure of the products were characterized by using Fourier transform infrared spectroscopy. Additionally, the emulsification performance and surface activity of the modified SL were evaluated, and the particle size of the emulsified asphalt was determined. The emulsification performance and the surface activity of the modified SL were significantly improved compared with those of the original SL. Notably, the emulsified asphalt by the modified SL exhibited superior performance and enhanced storage stability. The ductility of the emulsified asphalts at 15°C increases from 46.3 to ~70 mm, as well as the storage stability from 4.8% to ~2% before and after the addition of the modified SL. In contrast, the emulsifier with rich amide and amine groups by graft copolymerization is superior to that by the Mannich reaction for asphalt emulsification.
- 1 August 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (45)
Sodium Lignosulfonate‐Based Emulsifiers for Asphalt Emulsion
Emulsified asphalt is a critical component of low‐temperature pavement materials and plays a pivotal role in determining the durability of asphalt mixtures. Lignosulfonate, with advantages such as facile preparation, environmental friendliness, recyclability, and energy conservation, has been used in various fields, but the insufficient emulsifying capacity limits its application as an emulsifier for asphalt. To meet the needs of emulsified asphalt as pavement materials, the modification of sodium lignosulfonate (SL) was conducted by graft copolymerization and the Mannich reaction, resulting in two kinds of emulsifiers with high performance for asphalt emulsion. The optimal conditions for both modification processes were thoroughly examined by using ductility as the key indicator. The molecular composition and structure of the products were characterized by using Fourier transform infrared spectroscopy. Additionally, the emulsification performance and surface activity of the modified SL were evaluated, and the particle size of the emulsified asphalt was determined. The emulsification performance and the surface activity of the modified SL were significantly improved compared with those of the original SL. Notably, the emulsified asphalt by the modified SL exhibited superior performance and enhanced storage stability. The ductility of the emulsified asphalts at 15°C increases from 46.3 to ~70 mm, as well as the storage stability from 4.8% to ~2% before and after the addition of the modified SL. In contrast, the emulsifier with rich amide and amine groups by graft copolymerization is superior to that by the Mannich reaction for asphalt emulsification.
- 22 June 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (13) , 8407-8425
Synthesis and characterization of vinyltriethoxysilane-modified polycarboxylate superplasticizer for enhanced sulfate resistance
- 22 June 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (13) , 8407-8425
Synthesis and characterization of vinyltriethoxysilane-modified polycarboxylate superplasticizer for enhanced sulfate resistance
- 22 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1635-1645
Antifouling and Bactericidal Zwitterionic Polymer Coatings with Synergistic Inhibitory and Killing Properties
Polymeric coatings that combine resistance to adhesion ("defending") and killing ("attacking") of biocontaminants were proposed to endow the surface with nonadhesive and bactericidal capabilities. In contrast, a zwitterionic copolymer P(GMA-co-DMAPS) with antifouling groups ([2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide, DMAPS) and a zwitterionic/cationic copolymer P(GMA-co-DMAPS-co-DMC) with bactericidal groups ([2-(methacryloyloxy)ethyl]trimethylammonium chloride, DMC) were synthesized, of which the latter exhibited synergistic inhibitory and killing properties. The distinct feed ratios of monomers were conducted, and the optimal molar ratio was obtained. The polymer coating was chemically bonded to the surface of substrates such as stainless steel via the addition-elimination reaction of epoxy groups and hydroxyl groups. Stainless steel surfaces grafted with G20D80-5DMC exhibited fine antifouling and bactericidal properties. The results showed that a highly efficient defending-attacking synergistic effect was achieved with antiprotein adsorption of more than 90% and bactericidal rates against Staphylococcus aureus and Escherichia coli of 98.6% and 96.6%, respectively. The polymers proposed in this study can effectively play an antifouling and antibacterial synergistic role and can be grafted onto substrates through a simple and effective method, showing attractive potential in marine, biomedical, and industrial applications.
- 22 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1635-1645
Antifouling and Bactericidal Zwitterionic Polymer Coatings with Synergistic Inhibitory and Killing Properties
Polymeric coatings that combine resistance to adhesion ("defending") and killing ("attacking") of biocontaminants were proposed to endow the surface with nonadhesive and bactericidal capabilities. In contrast, a zwitterionic copolymer P(GMA-co-DMAPS) with antifouling groups ([2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide, DMAPS) and a zwitterionic/cationic copolymer P(GMA-co-DMAPS-co-DMC) with bactericidal groups ([2-(methacryloyloxy)ethyl]trimethylammonium chloride, DMC) were synthesized, of which the latter exhibited synergistic inhibitory and killing properties. The distinct feed ratios of monomers were conducted, and the optimal molar ratio was obtained. The polymer coating was chemically bonded to the surface of substrates such as stainless steel via the addition-elimination reaction of epoxy groups and hydroxyl groups. Stainless steel surfaces grafted with G20D80-5DMC exhibited fine antifouling and bactericidal properties. The results showed that a highly efficient defending-attacking synergistic effect was achieved with antiprotein adsorption of more than 90% and bactericidal rates against Staphylococcus aureus and Escherichia coli of 98.6% and 96.6%, respectively. The polymers proposed in this study can effectively play an antifouling and antibacterial synergistic role and can be grafted onto substrates through a simple and effective method, showing attractive potential in marine, biomedical, and industrial applications.
- 1 September 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 36 (9)
Synthesis and Performance of Anticlay Polycarboxylate Superplasticizers
- 1 September 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 36 (9)
Synthesis and Performance of Anticlay Polycarboxylate Superplasticizers
- Open Access
Facile Preparation of Polysiloxane-Modified Asphalt Binder Exhibiting Enhanced Performance
The development of polymer-modified asphalt (asphalt = asphalt binder) is significant because the polymer modifier can improve the performance of asphalt mixture and meet the requirements of the modern asphalt pavement. Herein, we present a novel polysiloxane-modified asphalt with enhanced performance, formed by simply mixing hydroxy-terminated polysiloxane (HO-PDMS) into base asphalt at 140 °C. The interaction mechanism of HO-PDMS in base asphalt was characterized by FT-IR, GPC, and DSC. It reveals that HO-PDMS polymers have been chemically bonded into the asphalt, and, thus, the resultant asphalt exhibits optimal compatibility and storage stability. The results based on fluorescence microscopy and a segregation test prove that HO-PDMS has good compatibility with base asphalt. Moreover, by virtue of the intriguing properties of polysiloxane, the present asphalt possesses improved low- and high-temperature properties, higher thermal stability, and enhanced hydrophobicity compared to conventional asphalt when using an appropriate dosage of HO-PDMS. DSC indicated that the Tg of modified asphalt (−12.8 °C) was obviously lower than that of base asphalt (−7.1 °C). DSR shows that the rutting parameter of modified asphalt was obviously higher than that of base asphalt. BBR shows that modified asphalt exhibited the lowest stiffness modulus and the highest creep rate with an HO-PDMS dosage of 6% and 4%, respectively. These results demonstrate that polysiloxane-modified asphalt can be promisingly utilized in realistic asphalt pavement with specific requirements, particularly high-/low-temperature resistance.
Open AccessFacile Preparation of Polysiloxane-Modified Asphalt Binder Exhibiting Enhanced Performance
The development of polymer-modified asphalt (asphalt = asphalt binder) is significant because the polymer modifier can improve the performance of asphalt mixture and meet the requirements of the modern asphalt pavement. Herein, we present a novel polysiloxane-modified asphalt with enhanced performance, formed by simply mixing hydroxy-terminated polysiloxane (HO-PDMS) into base asphalt at 140 °C. The interaction mechanism of HO-PDMS in base asphalt was characterized by FT-IR, GPC, and DSC. It reveals that HO-PDMS polymers have been chemically bonded into the asphalt, and, thus, the resultant asphalt exhibits optimal compatibility and storage stability. The results based on fluorescence microscopy and a segregation test prove that HO-PDMS has good compatibility with base asphalt. Moreover, by virtue of the intriguing properties of polysiloxane, the present asphalt possesses improved low- and high-temperature properties, higher thermal stability, and enhanced hydrophobicity compared to conventional asphalt when using an appropriate dosage of HO-PDMS. DSC indicated that the Tg of modified asphalt (−12.8 °C) was obviously lower than that of base asphalt (−7.1 °C). DSR shows that the rutting parameter of modified asphalt was obviously higher than that of base asphalt. BBR shows that modified asphalt exhibited the lowest stiffness modulus and the highest creep rate with an HO-PDMS dosage of 6% and 4%, respectively. These results demonstrate that polysiloxane-modified asphalt can be promisingly utilized in realistic asphalt pavement with specific requirements, particularly high-/low-temperature resistance.
- 23 June 2022
- Published by Wiley in Polymer Engineering & Science
- Vol. 62 (9) , 2769-2778
Synthesis and property of EPEG‐based polycarboxylate ether superplasticizers via RAFT polymerization
Polycarboxylate ether superplasticizers (PCEs) with comb‐shaped molecular structures have attracted considerable attention in the area of admixtures for construction engineering. However, there are some contradictions in studying the relationship between the molecular structure and property of PCE due to its random structure based on traditional free radical polymerization, which is confused for designing and developing novel PCEs. In this article, a series of reversible addition fragmentation chain transfer (RAFT) polymerization‐based polycarboxylate ether superplasticizers (RPCs) were prepared by the copolymerization of acrylic acid (AA) and ethylene‐glycol monovinyl polyethylene glycol (EPEG). The chemical structure and composition of RPCs were characterized and their adsorption behavior and dispersion properties were conducted. The results demonstrate that the molecular weights of RPCs do not vary significantly with prolonging reaction time, and the actual monomer ratio in RPCs displays a significant change to the feed one due to the monomer reactivity and conversion at higher reaction temperature, which is different from conventional free radical polymerization. The dispersion and adsorption properties of RPCs to cement were evaluated by slurry fluidity tests and total organic carbon (TOC) experiments. The effect of polymerization temperature and time on the dispersion ability has been systematically studied. The results indicate that the dispersion ability and adsorption capacity of RPCs are closely related to their molecular structures. The dispersion ability of RPCs were enhanced with increasing carboxyl group density in a certain range of monomer molar ratios (≤6:1). This study will provide a new platform for designing and developing high‐performance and rational cost‐effective superplasticizers with well‐defined structure and controlled molecular weight.
- 23 June 2022
- Published by Wiley in Polymer Engineering & Science
- Vol. 62 (9) , 2769-2778
Synthesis and property of EPEG‐based polycarboxylate ether superplasticizers via RAFT polymerization
Polycarboxylate ether superplasticizers (PCEs) with comb‐shaped molecular structures have attracted considerable attention in the area of admixtures for construction engineering. However, there are some contradictions in studying the relationship between the molecular structure and property of PCE due to its random structure based on traditional free radical polymerization, which is confused for designing and developing novel PCEs. In this article, a series of reversible addition fragmentation chain transfer (RAFT) polymerization‐based polycarboxylate ether superplasticizers (RPCs) were prepared by the copolymerization of acrylic acid (AA) and ethylene‐glycol monovinyl polyethylene glycol (EPEG). The chemical structure and composition of RPCs were characterized and their adsorption behavior and dispersion properties were conducted. The results demonstrate that the molecular weights of RPCs do not vary significantly with prolonging reaction time, and the actual monomer ratio in RPCs displays a significant change to the feed one due to the monomer reactivity and conversion at higher reaction temperature, which is different from conventional free radical polymerization. The dispersion and adsorption properties of RPCs to cement were evaluated by slurry fluidity tests and total organic carbon (TOC) experiments. The effect of polymerization temperature and time on the dispersion ability has been systematically studied. The results indicate that the dispersion ability and adsorption capacity of RPCs are closely related to their molecular structures. The dispersion ability of RPCs were enhanced with increasing carboxyl group density in a certain range of monomer molar ratios (≤6:1). This study will provide a new platform for designing and developing high‐performance and rational cost‐effective superplasticizers with well‐defined structure and controlled molecular weight.