Guojue Wang

In order to study the factors that affect the crack width, cracking mechanism, and development laws of the U‐shaped steel concrete composite (USCC) beam, and to propose a crack width calculation formula suitable for this new type of composite beam, cracking tests were conducted on four simply supported beam specimens. These specimens, which featured different steel beam forms, shear connectors, and longitudinal reinforcement arrangements, were all subjected to negative bending moments. Research has shown that USCC beams and H‐shaped steel concrete composite (HSCC) beams exhibited basically consistent crack width‐load relationships. In the early stage of the experiment, the crack width of the specimen exhibits an approximately linear relationship with the load, while in the late stage of the experiment, the crack width rapidly increases. In addition, the crack width of the USCC beam specimen developed faster than that of the HSCC beam. The experimental phenomenon shows that whether it is an USCC beam or a HSCC beam, the distribution of crack width along the concrete slab width is uneven, and this non‐uniformity is more obvious outside the beam width range. The centralized arrangement of longitudinal bars will exacerbate the non‐uniformity of crack width distribution, and the overall crack width is greater than that of specimens with uniformly arranged longitudinal bars. In addition, the effectiveness of channel shear connectors in controlling crack propagation is better than that of shear studs, and the slip at the interface between the concrete slab and the steel beam of the specimen using shear studs is greater than that of the specimen using channel shear connectors when the load is large. Based on the experimental results and formulas in the “Design Standards for Steel Structures” and the “Design Specifications for Concrete Structures,” a formula for calculating the crack width of USCC beams is proposed, and the coefficients in the current specifications have been corrected. The calculated crack width is in good agreement with the experimental value, which can provide a reference for calculating the crack width of this type of composite beam.

Extensive investigations for the inspect and record of Building Energy Conservation (BEC)have been in the four representative cities of thermal efficiency sub areas of China, existing problems of current BEC inspect and record in China are analyzed. Based on the actual situation of the BEC inspect, the solution is proposed. Based on the model mentioned above, the Information Management System for BEC item inspect and record suiting for each thermal efficiency sub areas features, which consists of system login and system management module, construction-related units module, inspect entries module, construction project information module, item inspect module, is developed. This system owns good software extensibility, clear interface, simple operation for the clients and so on.