RSRenata Antoun Simão

Renata Antoun Simão

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Renata Antoun Simão has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Monitoring Retrogradation in Starch-Based Films Reinforced with Plasma-Treated Lignin Using FTIR-PCA Analysis

    by Eduardo Genner Ferreira de Almeida, Tiago Dos Santos Mendonça, Lucas Galhardo Pimenta Tienne, Tiago Albertini Balbino, Renata Antoun Simao

    Biodegradable films based on biomaterials have gained significant attention as sustainable alternatives to conventional plastic packaging, offering reduced environmental impact and potential for functional tailoring. In this study, starch films were reinforced with lignin, both untreated and modified by low-temperature plasma treatment, and analyzed after storage periods of 30 days and 2 years. The effects of lignin concentration, plasma surface modification, and sample aging were investigated through Fourier Transform Infrared Spectroscopy (FTIR) and multivariate Principal Component Analysis (PCA). Spectral data revealed variations in band intensities and shifts, particularly in regions associated with hydroxyl, methylene, and glycosidic linkages, indicating structural reorganization. PCA enabled the discrimination of samples based on lignin content, plasma treatment, and aging status, highlighting specific spectral features responsible for the observed differences. The findings demonstrate that plasma-modified lignin can alter molecular organization and long-term properties of starch films, offering a promising strategy for tuning the physicochemical behavior of biopolymeric materials.

  • Open Access

    ANTIVIRAL COATINGS TO PRODUCE BREATHABLE AND BIODEGRADABLE FILTER MASKS

    by Rafael Santos da Cruz Paula, Antônio da Cruz Paula, Luis Felipe Santos da Cruz Paula, Camila Ferreira Gerardo, Marco A. P. Horta, Maria Angélica Mares-Guia, Renata Antoun Simão, Luiz Carlos de Lima

    Surgical masks are recommended by the World Health Organization for personal protection against disease transmission. However, most of the surgical masks on the market are disposable and cannot be self-sterilized for reuse. Thus, when confronting the global public health crisis, severe pollution due to disposable masks is inevitable. In this paper, a novel low-cost filter mask with excellent breathability is reported to replace the filters’ oil derivatives through an ecologically correct filter with properties sustainably optimized on a pre-industrial scale (roll-to-roll). A roll of common paper was passed through a vacuum chamber and deposited by CVD. Hydrophobicity and permeation were measured through contact angle, SEM and AFM. The droplets do not penetrate the filter for a minimum of two hours. Moreover, the filters proved to be efficient in antimicrobial and breathability tests.

  • Open Access

    ANTIVIRAL COATINGS TO PRODUCE BREATHABLE AND BIODEGRADABLE FILTER MASKS

    by Rafael Santos da Cruz Paula, Antônio da Cruz Paula, Luis Felipe Santos da Cruz Paula, Camila Ferreira Gerardo, Marco A. P. Horta, Maria Angélica Mares-Guia, Renata Antoun Simão, Luiz Carlos De Lima

    Surgical masks are recommended by the World Health Organization for personal protection against disease transmission. However, most of the surgical masks on the market are disposable and cannot be self-sterilized for reuse. Thus, when confronting the global public health crisis, severe pollution due to disposable masks is inevitable. In this paper, a novel low-cost filter mask with excellent breathability is reported to replace the filters’ oil derivatives through an ecologically correct filter with properties sustainably optimized on a pre-industrial scale (roll-to-roll). A roll of common paper was passed through a vacuum chamber and deposited by CVD. Hydrophobicity and permeation were measured through contact angle, SEM and AFM. The droplets do not penetrate the filter for a minimum of two hours. Moreover, the filters proved to be efficient in antimicrobial and breathability tests.

  • Open Access

    POLYHYDROXYBUTYRATE GRANULES MODIFICATION BY INDIRECT ATMOSPHERIC AIR PLASMA: APPLICATION IN BIPHASIC SYSTEM

    by Rodrigo Machado Liscano, Laysa Silva Barboza, Ana Carolina Bastos Rodrigues, Tiago dos Santos Mendonça, Luciara da Silva, Roberta Helena Mendonça, Renata Antoun Simão, Daniele Cruz Bastos

    Biopolymers, such as Polyhydroxybutyrate (PHB), present sustainable alternatives to conventional petroleum-based plastics, contributing to the development of environmentally friendly materials. However, their intrinsic properties often require enhancement for broader applications. Plasma technology emerges as a promising and versatile tool to modify the physicochemical characteristics of biopolymers. In this study, the effects of indirect air plasma treatment on PHB were evaluated. PHB granules dispersed in water were treated using a plasma pen for either 40 minutes (PHB-T40) or 60 minutes (PHB-T60). X-ray diffraction (XRD) analysis revealed that plasma treatment increased PHB crystallinity, with crystallinity values rising from 40.13% in untreated samples (PHB-NT) to 41.10% and 42.13% for PHB-T40 and PHB-T60, respectively. Chain reorientation was evidenced, along with changes in lattice parameters: an increase of 1.75% in 'a', 1.54% in 'b', and a decrease of 3.28% in 'c'. Scanning Electron Microscopy (SEM) showed reduced agglomerate size, while XRD indicated increases in crystallite size by 18.73% (PHB-T40) and 13.71% (PHB-T60). Thermal analyses further corroborated these findings.

  • SF6 Plasma Surface Modification of Flax Fibers for Improved Adhesion in Polypropylene Composites

    by Anderson Thiago Vasconcelos Veiga, Yuri Ferreira da Silva, Rafael Cordeiro Cavalcante, Renata Antoun Simão


  • SIMPLE AND GREEN PRODUCTION OF LIGNIN NANOPARTICLES USING ETHANOL-WATER MIXTURES AND ULTRASONICATION

    by Eduardo G. F. de Almeida, Lucas G. P. Tienne, Braulio S. Archanjo, Felipe S. Alencastro, Tiago A. Balbino, Renata A. Simão

    Lignin nanoparticles (LNPs) have emerged as promising bio-based materials for sustainable applications, but conventional synthesis methods often rely on surfactants, chemical modifications, or toxic solvents. In this study, we present a simple and environmentally friendly approach for producing LNPs using ethanol-water mixtures and ultrasonication, without the use of additives or hazardous reagents. Two solvent compositions (70 and 90% ethanol, v/v in water) and varying sonication times (0-2 h) were evaluated to investigate their effects on nanoparticle formation, morphology, and size. Visual assessment and scanning electron microscopy (SEM) revealed that 70% ethanol promotes spontaneous nanoparticle formation with spherical morphology and good dispersion, even without sonication. In contrast, 90% ethanol required prolonged ultrasonication to produce smaller and more uniform particles. Particle size analysis confirmed that ultrasonication enhances particle refinement, especially in the solvent systems with higher ethanol content. This minimalist, surfactant-free method demonstrates the potential for scalable and green production of lignin nanoparticles, offering a valuable platform for future development of functional bio-based nanomaterials.

  • Open Access

    In Vitro Enhanced Bonding of Silane‐Modified Adhesive Systems in Fiber Post Cementation

    by Thais Pantoja de França, João Victor Frazão Câmara, Leonardo Queiroz Athias, Renata Antoun Simão, Maíra Prado

    Objective: To compare the effect of applying silane prior to the adhesive with an adhesive containing silane in its composition in the cementation of fiber posts to conventional resin cement. Materials and Methods: In total 20 fiber posts were divided into two groups: silane/adhesive (G1): application of silane, followed by the application of the adhesive; and adhesive with silane (G2): application of adhesive containing silane in its composition. The test specimens were obtained from cylinders of AllCem Core resin cement, with the fiber postpositioned in the center of its long axis. The post/cement assembly was sectioned, and evaluated for bond strength (BS) by pushout test, and fracture pattern was analyzed with a stereoscopic microscope. Results: No significant difference in BS was observed between G1 (silane + adhesive) and G2 (adhesive containing silane). For fracture patterns, Type 3 (cohesive post and cement) was the most observed. Conclusions: The use of an adhesive containing silane, as per the adopted protocol, did not compromise BS when fiber posts were cemented with Allcem CORE cement. Both techniques exhibited similar results, with minor differences in fracture patterns.

  • Open Access

    Development of Chitosan Scaffold Carrier Device for Absorption and Controlled Release of Iron Chloride Using In Vitro Methods of Characterization

    by Ingrid Russoni de Lima, Márcio Teodoro Fernandes, Cristiane Xavier Resende, Bonifácio Oliveira Fialho, Leonardo Martins Silva, Charle Correia da Silva, Gláucio Soares da Fonseca, Renata Antoum Simão, José Adilson Castro, Marcos Flávio de Campos

    Chitosan spherical scaffolds, derived from the deacetylation of chitin, are natural polymers with significant potential, though challenges remain in optimizing their properties. The use of chitosan as a carrier for the controlled release of iron chloride is not yet fully established, despite iron’s critical role in various essential biological processes, including as a component of metalloenzymes and in the maintenance of life. Methods: This study aimed to develop a novel protocol for synthesing chitosan scaffolds and to characterize their properties using analytical techniques. Additionally, the release profile of iron was modeled using two primary controlled-release mathematical models. Results: The results demonstrated successful synthesis and physicochemical characterization of the chitosan sphere scaffolds. These scaffolds exhibited appropriate topography for iron loading and cellular interaction, as confirmed by SEM analysis, and contained functional groups as identified by FTIR. The scaffolds were also semi-crystalline (XRD), showed controlled degradation, and were confirmed to be non-toxic biomaterials. Furthermore, the modeling of the controlled release of iron chloride adsorbed on the scaffold surface, as well as the modeling of iron chloride specimens using the MEDUZA software, was successfully conducted. A theoretical curve was generated from the experimental dose-response data collected over time, considering variations in pH and medium concentration. Conclusions: In conclusion, a novel protocol for chitosan-based carriers was successfully developed, enabling thorough physicochemical characterization and modeling of both absorption and controlled release.

  • Plasma‐induced formation of coatings on vegetable ivory microparticles immersed in silicone oil: Enhancing surface coverage using natural products

    by Yuri Ferreira da Silva, Giana Almeida, Anderson Thiago Vasconcelos Veiga, Renata Nunes Oliveira, Patrick Perré, Renata A. Simao

    Aiming to enhance the potential applications of bioproducts, we developed an innovative approach for their hydrophobization using plasma activation of liquids. In this study, microparticles of vegetable ivory, a porous hygroscopic material, were treated by an air plasma jet while immersed in silicone oil. The in‐liquid plasma treatment formed coatings that reduced particle water vapor sorption. Pore surface coverage and sorption reduction were enhanced by mixing silicone oil with copaiba oil‐resin ( Copaifera spp.). Mulateiro extract ( Calycophyllum spruceanum ) was not as effective, owing to a lower affinity with silicone oil. For the first time, we demonstrate the plasma‐induced coating formation on particles immersed in liquid mixtures, a process in which liquid–liquid interfacial properties play a fundamental role.


  • Effect of self‐bias voltage on the nanoscale morphological properties of corn starch‐based films modified by hexamethyldisiloxane plasma

    by Marta D. da Fonseca de Albuquerque, Daniele C. Bastos, Robert S. Matos, Marcelo A. Pires, Nilson S. Ferreira, Glenda Q. Ramos, Henrique D. da Fonseca Filho, Renata A. Simao

    Thermoplastic starch (TPS) films underwent casting and plasma coating with Hexamethyldisiloxane (HMDSO) gas at various self‐bias voltages. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) imaging revealed slight swelling and grain structures in untreated TPS films due to starch dissolution. However, the HMDSO plasma treatment had minimal impact, with swollen grains still present beneath a layer of small granules. Contact angle measurements demonstrated that untreated films had an initial water contact angle of 32°, gradually decreasing over time. Conversely, HMDSO‐coated films exhibited stable hydrophobic behavior, with contact angles exceeding 100°. Statistical analysis confirmed TPS films’ lower average roughness, while modified films showed no significant difference in height parameters. Higher self‐bias voltages correlated with larger grain sizes. Notably, experimental treatments decreased long‐range spatial correlations, as indicated by Hurst's exponent.