Jiexi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiexi Wang has a total of 423 co-authors. Here are the top co-authors by number of shared publications:
Zhixing Wang
Central South University
106 shared publicationsHuajun Guo
School of metallurgy and environment Central South University Changsha China
85 shared publicationsXinhai Li
School of metallurgy and environment Central South University Changsha China
78 shared publicationsWenjie Peng
Central South University
59 shared publicationsGuochun Yan
54 shared publications- Xinhai Li
School of Metallurgy and Environment, Central South University, Changsha 410083, China
36 shared publications
Latest Publications
- 2 November 2026
- Published by Wiley in Small Methods
Unveiling the Failure Mechanisms of High‐Voltage 18650‐Type O3‐Layered Oxide//Hard Carbon Sodium‐Ion Full Cells
High‐voltage O3‐type layered oxide//hard carbon full cells offer a promising route toward high‐energy‐density sodium‐ion batteries, yet their high‐voltage degradation mechanisms remain insufficiently understood. Here, Ah‐level 18650 cylindrical full cells were cycled under different cut‐off voltages to elucidate the underlying failure mechanisms through non‐destructive and post‐mortem analyses. Increasing the cut‐off voltage from 4.05 to 4.20 V raises the energy density from 117.5 to 144.0 Wh kg −1 , but accelerates degradation, with direct‐current internal resistance growth increasing from 181% to 387% and capacity retention after 300 cycles decreasing from 96.4% to 68.3%. Impedance analysis reveals that charge‐transfer resistance gradually becomes dominant during high‐voltage cycling. Post‐mortem analysis reveals cathode interphase thickening and heterogeneous inorganic‐rich interphase growth, accompanied by an organic‐rich anode interphase, and increased accumulation of sodium‐containing deposits. Aging‐model decoupling demonstrates that capacity fading is primarily governed by active‐material loss and electrode capacity mismatch rather than sodium inventory loss. Notably, eliminating the constant‐voltage step in the 4.15‐CC protocol shortens the high‐voltage dwell time, reduces the resistance growth from 369% to 153%, and improves capacity retention from 85.0% to 93.9%. These findings provide full‐cell insight into high‐voltage degradation and highlight charging‐protocol optimization as an effective strategy to balance high energy density and long cycle life.
- 2 November 2026
- Published by Wiley in Small Methods
Unveiling the Failure Mechanisms of High‐Voltage 18650‐Type O3‐Layered Oxide//Hard Carbon Sodium‐Ion Full Cells
High‐voltage O3‐type layered oxide//hard carbon full cells offer a promising route toward high‐energy‐density sodium‐ion batteries, yet their high‐voltage degradation mechanisms remain insufficiently understood. Here, Ah‐level 18650 cylindrical full cells were cycled under different cut‐off voltages to elucidate the underlying failure mechanisms through non‐destructive and post‐mortem analyses. Increasing the cut‐off voltage from 4.05 to 4.20 V raises the energy density from 117.5 to 144.0 Wh kg −1 , but accelerates degradation, with direct‐current internal resistance growth increasing from 181% to 387% and capacity retention after 300 cycles decreasing from 96.4% to 68.3%. Impedance analysis reveals that charge‐transfer resistance gradually becomes dominant during high‐voltage cycling. Post‐mortem analysis reveals cathode interphase thickening and heterogeneous inorganic‐rich interphase growth, accompanied by an organic‐rich anode interphase, and increased accumulation of sodium‐containing deposits. Aging‐model decoupling demonstrates that capacity fading is primarily governed by active‐material loss and electrode capacity mismatch rather than sodium inventory loss. Notably, eliminating the constant‐voltage step in the 4.15‐CC protocol shortens the high‐voltage dwell time, reduces the resistance growth from 369% to 153%, and improves capacity retention from 85.0% to 93.9%. These findings provide full‐cell insight into high‐voltage degradation and highlight charging‐protocol optimization as an effective strategy to balance high energy density and long cycle life.
- 2 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 61651-61662
A Dual-Function Electrolyte Additive Suppresses Mn Crosstalk for Durable High-Temperature Graphite/LiMn2O4 Batteries
Mn crosstalk accelerates the degradation of graphite/LiMn2O4 (LMO) batteries, particularly at elevated temperatures, through the migration and deposition of dissolved Mn species on the graphite anode, which destabilizes the anode interphase. Here, tris(trimethylsilyl) phosphate (TMSP) suppresses this cross-electrode degradation pathway by regulating both the bulk electrolyte chemistry and the LMO/electrolyte interface. In the bulk electrolyte, the Si–O groups of TMSP consume HF and suppress continued HF generation through LiPF6 hydrolysis, thereby weakening acid-induced LMO corrosion. At the cathode interface, preferential adsorption and oxidation of TMSP promote the formation of a thin (∼3 nm) Li3PO4-rich cathode–electrolyte interphase (CEI), which limits electrolyte decomposition and Mn dissolution. These complementary effects reduce Mn dissolution and deposition on the graphite anode, thereby limiting Mn-associated SEI growth and resistance increase. In 1.6 Ah graphite/LMO 18650 cells, 2.1 wt % TMSP reduces Mn deposition on the anode by 95.2% and increases capacity recovery from 90.5% to 95.1% after storage at 60 °C for 7 days. The cells also retain 80.2% of their initial capacity after 500 cycles at 1 C and 45 °C. These results establish the suppression of Mn crosstalk as an effective strategy for improving the high-temperature durability of graphite/LMO batteries.
- 2 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (44) , 61651-61662
A Dual-Function Electrolyte Additive Suppresses Mn Crosstalk for Durable High-Temperature Graphite/LiMn2O4 Batteries
Mn crosstalk accelerates the degradation of graphite/LiMn2O4 (LMO) batteries, particularly at elevated temperatures, through the migration and deposition of dissolved Mn species on the graphite anode, which destabilizes the anode interphase. Here, tris(trimethylsilyl) phosphate (TMSP) suppresses this cross-electrode degradation pathway by regulating both the bulk electrolyte chemistry and the LMO/electrolyte interface. In the bulk electrolyte, the Si–O groups of TMSP consume HF and suppress continued HF generation through LiPF6 hydrolysis, thereby weakening acid-induced LMO corrosion. At the cathode interface, preferential adsorption and oxidation of TMSP promote the formation of a thin (∼3 nm) Li3PO4-rich cathode–electrolyte interphase (CEI), which limits electrolyte decomposition and Mn dissolution. These complementary effects reduce Mn dissolution and deposition on the graphite anode, thereby limiting Mn-associated SEI growth and resistance increase. In 1.6 Ah graphite/LMO 18650 cells, 2.1 wt % TMSP reduces Mn deposition on the anode by 95.2% and increases capacity recovery from 90.5% to 95.1% after storage at 60 °C for 7 days. The cells also retain 80.2% of their initial capacity after 500 cycles at 1 C and 45 °C. These results establish the suppression of Mn crosstalk as an effective strategy for improving the high-temperature durability of graphite/LMO batteries.
- Open Access
- 21 August 2026
- Published by Elsevier in SSRN Electronic Journal
Enhancing Capacity and Suppressing Metal Dissolution in Li2CuO2 via Ni Doping
Li2CuO2 is a promising cathode prelithiation agent for compensating the irreversible active lithium loss in lithium‑ion batteries; however, its practical application is hindered by severe structural degradation and Cu dissolution under oxidative charging conditions. Herein, we report that Ni doping serves as an effective strategy to address these challenges, with Li2Cu0.7Ni0.3O2 delivering an optimal prelithiation capacity of 387.9 mAh/g, significantly outperforming the pristine counterpart (313.8 mAh/g). More importantly, Ni doping suppresses copper dissolution by over an order of magnitude under harsh conditions (45 ℃, 4.2 V) and enhances environmental adaptability against moisture, with only 4.33% weight gain at 50% RH for 24h compared to 14.34% for pristine Li2CuO2. Combining in situ XRD, DFT calculations, and TEM analysis, we elucidate that the fundamental mechanism of Ni doping is to elevate the oxygen vacancy formation energy, thereby inhibiting the initial nucleation of oxygen vacancies and delaying the onset of structural collapse. Although both doped and pristine samples develop intragranular cracks upon delithiation, the Ni‑doped sample retains more ordered lattice features and forms stabilized surface phases (e.g., NiO, Cu4O3), which collectively mitigate further degradation. This work provides profound insights into the design of high‑performance prelithiation agents via defect chemistry modulation.
- 21 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEnhancing Capacity and Suppressing Metal Dissolution in Li2CuO2 via Ni Doping
Li2CuO2 is a promising cathode prelithiation agent for compensating the irreversible active lithium loss in lithium‑ion batteries; however, its practical application is hindered by severe structural degradation and Cu dissolution under oxidative charging conditions. Herein, we report that Ni doping serves as an effective strategy to address these challenges, with Li2Cu0.7Ni0.3O2 delivering an optimal prelithiation capacity of 387.9 mAh/g, significantly outperforming the pristine counterpart (313.8 mAh/g). More importantly, Ni doping suppresses copper dissolution by over an order of magnitude under harsh conditions (45 ℃, 4.2 V) and enhances environmental adaptability against moisture, with only 4.33% weight gain at 50% RH for 24h compared to 14.34% for pristine Li2CuO2. Combining in situ XRD, DFT calculations, and TEM analysis, we elucidate that the fundamental mechanism of Ni doping is to elevate the oxygen vacancy formation energy, thereby inhibiting the initial nucleation of oxygen vacancies and delaying the onset of structural collapse. Although both doped and pristine samples develop intragranular cracks upon delithiation, the Ni‑doped sample retains more ordered lattice features and forms stabilized surface phases (e.g., NiO, Cu4O3), which collectively mitigate further degradation. This work provides profound insights into the design of high‑performance prelithiation agents via defect chemistry modulation.
- 24 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41103-41112
Gradient Pore-Hydrophobicity Cooperation for Synergistic H2O/CO2 Management toward Efficient Acidic CO2 Electroreduction
Developing acidic electrochemical CO2 reduction reaction (CO2RR) systems can alleviate carbonate clogging in gas diffusion electrodes (GDEs), offering an efficient way to convert CO2 at industrial-level current densities (J > 200 mA cm–2). However, it comes at the cost of aggravating competitive hydrogen evolution reactions (HERs). Breaking this intrinsic selectivity–stability trade-off requires synergistic H2O/CO2 management. As a central component of GDEs, the gas diffusion layer (GDL) critically governs gas (CO2)–liquid (H2O) transport balance. This work proposes a gradient pore-hydrophobicity cooperation strategy for synergistic H2O/CO2 management to achieve efficient acidic CO2RR. Paired with commercial Ag catalysts, the Ag-GDEs exhibit an impressive CO Faraday efficiency of 97.26% at 400 mA cm–2 within a pH = 2.0 environment. Furthermore, in situ differential electrochemical mass spectrometry confirms the distinct mass transfer kinetics induced by GDL architectures. Lattice Boltzmann modeling simulations corroborate the effects of the gradient pore-hydrophobicity synergy on CO2 and H2O distribution in GDLs. This work presents an effective approach to the rational design of GDLs and the collaborative liquid–gas management for efficient CO2RR.
- 24 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41103-41112
Gradient Pore-Hydrophobicity Cooperation for Synergistic H2O/CO2 Management toward Efficient Acidic CO2 Electroreduction
Developing acidic electrochemical CO2 reduction reaction (CO2RR) systems can alleviate carbonate clogging in gas diffusion electrodes (GDEs), offering an efficient way to convert CO2 at industrial-level current densities (J > 200 mA cm–2). However, it comes at the cost of aggravating competitive hydrogen evolution reactions (HERs). Breaking this intrinsic selectivity–stability trade-off requires synergistic H2O/CO2 management. As a central component of GDEs, the gas diffusion layer (GDL) critically governs gas (CO2)–liquid (H2O) transport balance. This work proposes a gradient pore-hydrophobicity cooperation strategy for synergistic H2O/CO2 management to achieve efficient acidic CO2RR. Paired with commercial Ag catalysts, the Ag-GDEs exhibit an impressive CO Faraday efficiency of 97.26% at 400 mA cm–2 within a pH = 2.0 environment. Furthermore, in situ differential electrochemical mass spectrometry confirms the distinct mass transfer kinetics induced by GDL architectures. Lattice Boltzmann modeling simulations corroborate the effects of the gradient pore-hydrophobicity synergy on CO2 and H2O distribution in GDLs. This work presents an effective approach to the rational design of GDLs and the collaborative liquid–gas management for efficient CO2RR.
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Uniform CO2-Enriched Microenvironment Enabled by Sequentially Functionalized Hollow Double-Shell Structure for Maximal Active Site Utilization in CO2 Electroreduction
Sequentially functionalized hollow multishell architectures typically boost catalysis via enhanced site exposure and reactant enrichment; however, their potential to modulate intrinsic activity through spatiotemporal ordering remains elusive and underexplored. Here, we demonstrate that the sequentially functionalized double-shell architecture homogenizes mass transport to establish a uniform microenvironment, which synchronizes the electronic structures of active sites for equivalent excitation and maximized collective utilization, thereby enhancing catalytic activity and selectivity. A double-shell nanotube catalyst was developed, in which the pyridinic-N-doped defective carbon inner shell enables efficient CO2 enrichment and supply within catalytic microenvironment, while the outer carbon shell hybridized with Ni single atoms and nanoparticles facilitates electrocatalytic CO2 reduction. COMSOL simulations reveal that temporal-spatial ordering enhances both the magnitude and spatial uniformity of local CO2 concentration at the active sites. This catalyst delivers enhanced CO2-to-CO activity and selectivity, achieving a CO partial current density of 496.5 mA cm–2 with Faradaic efficiency above 97.5% over 100–500 mA cm–2 in flow-cell. The mechanistic analyses reveal that the uniform CO2-enriched microenvironment homogenizes and optimizes the electronic structure of all active sites, lowering the *COOH formation barrier and promoting *CO desorption to enhance catalytic performance. These findings reveal a previously unrecognized role of temporal‐spatial ordering, offering a powerful design principle for advanced catalysts.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUniform CO2-Enriched Microenvironment Enabled by Sequentially Functionalized Hollow Double-Shell Structure for Maximal Active Site Utilization in CO2 Electroreduction
Sequentially functionalized hollow multishell architectures typically boost catalysis via enhanced site exposure and reactant enrichment; however, their potential to modulate intrinsic activity through spatiotemporal ordering remains elusive and underexplored. Here, we demonstrate that the sequentially functionalized double-shell architecture homogenizes mass transport to establish a uniform microenvironment, which synchronizes the electronic structures of active sites for equivalent excitation and maximized collective utilization, thereby enhancing catalytic activity and selectivity. A double-shell nanotube catalyst was developed, in which the pyridinic-N-doped defective carbon inner shell enables efficient CO2 enrichment and supply within catalytic microenvironment, while the outer carbon shell hybridized with Ni single atoms and nanoparticles facilitates electrocatalytic CO2 reduction. COMSOL simulations reveal that temporal-spatial ordering enhances both the magnitude and spatial uniformity of local CO2 concentration at the active sites. This catalyst delivers enhanced CO2-to-CO activity and selectivity, achieving a CO partial current density of 496.5 mA cm–2 with Faradaic efficiency above 97.5% over 100–500 mA cm–2 in flow-cell. The mechanistic analyses reveal that the uniform CO2-enriched microenvironment homogenizes and optimizes the electronic structure of all active sites, lowering the *COOH formation barrier and promoting *CO desorption to enhance catalytic performance. These findings reveal a previously unrecognized role of temporal‐spatial ordering, offering a powerful design principle for advanced catalysts.
- 4 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7)
Recent Advances in Electrolytes for Silicon‐Based Lithium‐Ion Batteries: From Electrolyte Components to Formulation Design
Silicon‐based anodes are considered one of the most promising candidates for next‐generation high‐energy‐density lithium‐ion batteries (LIBs) because of their ultrahigh theoretical capacity (≈4200 mAh g −1 ) and natural abundance. However, their practical application is severely hindered by drastic volume changes during repeated lithiation and delithiation, which lead to unstable interfacial chemistry and rapid capacity fading. Electrolyte design has therefore emerged as a critical strategy for regulating interfacial reactions and enabling the stable operation of silicon‐based anodes. This review systematically summarizes recent advances in electrolyte engineering for silicon‐based anodes, with particular emphasis on the rational design of electrolyte components and formulation strategies. From the perspective of electrolyte composition, progress in lithium salts, solvents, and functional additives is critically discussed, highlighting the evolution from conventional single‐component systems to multifunctional and synergistic electrolyte formulations. From the standpoint of formulation strategies, the evolution from empirical optimization to mechanism‐driven approaches is focused, including molecular structure regulation, solvation structure regulation, AI‐assisted electrolyte discovery, and solid‐state electrolytes. Finally, electrolyte development for silicon‐based anodes is analyzed, and unified design principles are proposed to guide future studies. This review aims to provide a systematic framework and forward‐looking insights into the rational development of advanced electrolytes for silicon‐based LIBs.
- 4 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7)
Recent Advances in Electrolytes for Silicon‐Based Lithium‐Ion Batteries: From Electrolyte Components to Formulation Design
Silicon‐based anodes are considered one of the most promising candidates for next‐generation high‐energy‐density lithium‐ion batteries (LIBs) because of their ultrahigh theoretical capacity (≈4200 mAh g −1 ) and natural abundance. However, their practical application is severely hindered by drastic volume changes during repeated lithiation and delithiation, which lead to unstable interfacial chemistry and rapid capacity fading. Electrolyte design has therefore emerged as a critical strategy for regulating interfacial reactions and enabling the stable operation of silicon‐based anodes. This review systematically summarizes recent advances in electrolyte engineering for silicon‐based anodes, with particular emphasis on the rational design of electrolyte components and formulation strategies. From the perspective of electrolyte composition, progress in lithium salts, solvents, and functional additives is critically discussed, highlighting the evolution from conventional single‐component systems to multifunctional and synergistic electrolyte formulations. From the standpoint of formulation strategies, the evolution from empirical optimization to mechanism‐driven approaches is focused, including molecular structure regulation, solvation structure regulation, AI‐assisted electrolyte discovery, and solid‐state electrolytes. Finally, electrolyte development for silicon‐based anodes is analyzed, and unified design principles are proposed to guide future studies. This review aims to provide a systematic framework and forward‐looking insights into the rational development of advanced electrolytes for silicon‐based LIBs.
- 28 May 2026
- Published by Elsevier in Materials Today
- Vol. 98
Synergistic acids induced rapid cathode dissociation for material-oriented recycling of spent lithium-ion batteries
- 28 May 2026
- Published by Elsevier in Materials Today
- Vol. 98
Synergistic acids induced rapid cathode dissociation for material-oriented recycling of spent lithium-ion batteries
- 22 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (50)
Weakly Aggregated Polymeric Network Enabling Advanced Hard Carbon for Sodium Storage
Constructing a closed pore structure through precursor modification has been regarded as an effective route for boosting plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries (SIBs). However, the mechanistic role of polymer aggregation behavior in the closed pore formation in polymer‐derived HCs remains poorly understood. Herein, flexible chain conformation has been incorporated into the phenolic resin network to weaken the aggregated state and promote closed pores formation in the polymer‐derived HC for the first time. During the stepwise immersion in ethanol and water solvent, the extension of crystalline domains in polyethylene glycol segments can reduce the multichain aggregation as well as activate more free volumes within the polymer backbone. The weak aggregation transition can facilitate the multiple releases of volatile byproducts and mitigate the rearrangement of carbon skeleton, which constructs a plentiful closed pore structure with ultra‐small pore size during pyrolysis. As a result, the as‐obtained HC anode demonstrates a high reversible capacity (357.9 mAh g −1 at 0.1 C), enhanced rate performance (168.9 mAh g −1 at 5 C), as well as excellent cycling stability over 2000 cycles at 4 C. This work provides a valuable insight into aggregate chemistry toward the development of high‐performance HC anodes for advanced SIBs.
- 22 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (50)
Weakly Aggregated Polymeric Network Enabling Advanced Hard Carbon for Sodium Storage
Constructing a closed pore structure through precursor modification has been regarded as an effective route for boosting plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries (SIBs). However, the mechanistic role of polymer aggregation behavior in the closed pore formation in polymer‐derived HCs remains poorly understood. Herein, flexible chain conformation has been incorporated into the phenolic resin network to weaken the aggregated state and promote closed pores formation in the polymer‐derived HC for the first time. During the stepwise immersion in ethanol and water solvent, the extension of crystalline domains in polyethylene glycol segments can reduce the multichain aggregation as well as activate more free volumes within the polymer backbone. The weak aggregation transition can facilitate the multiple releases of volatile byproducts and mitigate the rearrangement of carbon skeleton, which constructs a plentiful closed pore structure with ultra‐small pore size during pyrolysis. As a result, the as‐obtained HC anode demonstrates a high reversible capacity (357.9 mAh g −1 at 0.1 C), enhanced rate performance (168.9 mAh g −1 at 5 C), as well as excellent cycling stability over 2000 cycles at 4 C. This work provides a valuable insight into aggregate chemistry toward the development of high‐performance HC anodes for advanced SIBs.
- 20 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (21) , 15662-15674
Hard–Soft Gradient-Engineered Oxychloride Coating on Ni-Rich Cathodes for All-Solid-State Lithium Batteries
All-solid-state lithium batteries (ASSLBs) employing Ni-rich layered oxide cathodes (NRLOs) and sulfide solid-state electrolytes (SSEs) hold great promise for high energy density and enhanced safety, yet they suffer from severe interfacial instability. This study precisely constructs a composite gradient coating on the surface of NRLOs by using atomic layer deposition. The oxygen-rich inner layer, which is induced by the reaction between TiCl4 and predeposited Li2O/LiOH, functions as an electrochemically inert barrier that enhances structural integrity and suppresses transition-metal dissolution, whereas the chlorine-rich outer layer acts as a compliant interfacial region with favorable compatibility toward sulfide SSE, which accommodates volume changes during cycling and mitigates mechanical stress at the cathode/sulfide SSE interface. Additionally, the well-structured LiCl nanocrystals formed within the coating layer improve both the cycling stability and Li+ transport kinetics. The optimized NCM95 cathode demonstrates exceptional cycling stability (96.9% capacity retention after 200 cycles) and rate capability (103 mAh g–1 at 2 C) at room temperature. This work underscores the importance of designing multifunctional coatings and provides a scalable approach to stabilizing the cathode/electrolyte interface for high-energy ASSLBs.
- 20 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (21) , 15662-15674
Hard–Soft Gradient-Engineered Oxychloride Coating on Ni-Rich Cathodes for All-Solid-State Lithium Batteries
All-solid-state lithium batteries (ASSLBs) employing Ni-rich layered oxide cathodes (NRLOs) and sulfide solid-state electrolytes (SSEs) hold great promise for high energy density and enhanced safety, yet they suffer from severe interfacial instability. This study precisely constructs a composite gradient coating on the surface of NRLOs by using atomic layer deposition. The oxygen-rich inner layer, which is induced by the reaction between TiCl4 and predeposited Li2O/LiOH, functions as an electrochemically inert barrier that enhances structural integrity and suppresses transition-metal dissolution, whereas the chlorine-rich outer layer acts as a compliant interfacial region with favorable compatibility toward sulfide SSE, which accommodates volume changes during cycling and mitigates mechanical stress at the cathode/sulfide SSE interface. Additionally, the well-structured LiCl nanocrystals formed within the coating layer improve both the cycling stability and Li+ transport kinetics. The optimized NCM95 cathode demonstrates exceptional cycling stability (96.9% capacity retention after 200 cycles) and rate capability (103 mAh g–1 at 2 C) at room temperature. This work underscores the importance of designing multifunctional coatings and provides a scalable approach to stabilizing the cathode/electrolyte interface for high-energy ASSLBs.
- 11 May 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (20) , 6659-6669
Mitigating Internal Gliding of a High-Voltage O3-Type Cathode via Na-Site Doping with High Ionic Potential Cations
High-voltage O3-type cathodes promise higher energy densities for sodium-ion batteries but suffer from severe lattice strain, interlayer gliding, and structural degradation during cycling. Here, we report that Te4+ doping into the Na 3a sites of NaNi0.35Fe0.2Mn0.3Cu0.05Ti0.1O2 markedly improves its high-voltage cycling stability. Te4+ doping suppresses stress accumulation, interlayer gliding, and intragranular cracking, thereby enhancing structural reversibility and electrochemical performance. Extending this strategy, Ca2+, Y3+, and Sm3+ with similarly high ionic potentials preferentially occupy Na 3a sites, all exhibiting reduced lattice degradation and improved durability, confirming a universal "pinning effect". Notably, Ca2+ doping enables kilogram-scale production, and the assembled 18650 cylindrical cell retains 89.9% capacity after 500 cycles. Mechanistically, strong ion-oxygen interactions stiffen the Na layer lattice, stabilizing the framework during Na (de)intercalation and suppressing (003) gliding. This work establishes high ionic potential Na-site doping as a broadly applicable design principle for durable high-voltage O3 cathodes.
- 11 May 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (20) , 6659-6669
Mitigating Internal Gliding of a High-Voltage O3-Type Cathode via Na-Site Doping with High Ionic Potential Cations
High-voltage O3-type cathodes promise higher energy densities for sodium-ion batteries but suffer from severe lattice strain, interlayer gliding, and structural degradation during cycling. Here, we report that Te4+ doping into the Na 3a sites of NaNi0.35Fe0.2Mn0.3Cu0.05Ti0.1O2 markedly improves its high-voltage cycling stability. Te4+ doping suppresses stress accumulation, interlayer gliding, and intragranular cracking, thereby enhancing structural reversibility and electrochemical performance. Extending this strategy, Ca2+, Y3+, and Sm3+ with similarly high ionic potentials preferentially occupy Na 3a sites, all exhibiting reduced lattice degradation and improved durability, confirming a universal "pinning effect". Notably, Ca2+ doping enables kilogram-scale production, and the assembled 18650 cylindrical cell retains 89.9% capacity after 500 cycles. Mechanistically, strong ion-oxygen interactions stiffen the Na layer lattice, stabilizing the framework during Na (de)intercalation and suppressing (003) gliding. This work establishes high ionic potential Na-site doping as a broadly applicable design principle for durable high-voltage O3 cathodes.