Pandian Ganesan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pandian Ganesan has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Sangaraju Shanmugam
Daegu Gyeongbuk Institute of Science & Technology (DGIST)
13 shared publications - Arumugam Sivanantham
Department of Energy Science and Engineering, DGIST, Daegu 42988, Korea
8 shared publications - Subramanyan Vasudevan
CSIR-Central Electrochemical Research Institute Karaikudi 630006 India
5 shared publications - Naotoshi Nakashima
International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
4 shared publications - Ramakrishnan Kamaraj
CSIR-Central Electrochemical Research Institute, Karaikudi 630 006, India
4 shared publications - Jakkid Sanetuntikul
King Mongkut’s University of Technology North Bangkok
3 shared publications
Latest Publications
- Open Access
- 16 October 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (10) , e70688
Oxygen Reduction Electrocatalysis of an Fe‐N, S Coordinated Framework/Ketjen Black Composite for Aluminium‐Air Batteries
Aluminum air batteries have emerged as promising candidates for next‐generation energy storage systems due to their theoretical capacity and cost‐effectiveness. However, their practical implementation is often limited by the sluggish oxygen reduction reaction (ORR) kinetics at the air cathode. Herein, an iron‐coordinated thiourea‐formaldehyde framework (Fe‐TP) is synthesized under mild conditions without subsequent thermal treatment or calcination and integrated with various conductive carbon supports, including Ketjen Black, multi‐walled carbon nanotubes (MWCNTs), Vulcan, and Super P to enhance its ORR activity. Among these composites, Fe‐TP/Ketjen composite exhibits an E 1/2 of 0.70 V vs. RHE and retained its ORR activity with only a 2.86% decrease in E 1/2 after 20 000 potential cycles. This superior activity and durability are attributed to coordination of iron with nitrogen and sulfur in Fe‐TP which promotes dπ–pπ interactions and the high surface area and excellent conductivity of Ketjen black. As an Al‐air battery air cathode, Fe‐TP/Ketjen delivers a peak power density of 16 mW/cm 2 , a discharge capacity of 2100 mAh/g and an open circuit voltage of 1.43 V. In situ Raman spectroscopy reveals reversible changes in the carbon environment during battery discharge and charging. These findings demonstrate the potential of Fe‐TP/Ketjen composite as a durable, noble‐metal free ORR catalyst for aluminum‐air batteries.
- 16 October 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (10) , e70688
Open AccessOxygen Reduction Electrocatalysis of an Fe‐N, S Coordinated Framework/Ketjen Black Composite for Aluminium‐Air Batteries
Aluminum air batteries have emerged as promising candidates for next‐generation energy storage systems due to their theoretical capacity and cost‐effectiveness. However, their practical implementation is often limited by the sluggish oxygen reduction reaction (ORR) kinetics at the air cathode. Herein, an iron‐coordinated thiourea‐formaldehyde framework (Fe‐TP) is synthesized under mild conditions without subsequent thermal treatment or calcination and integrated with various conductive carbon supports, including Ketjen Black, multi‐walled carbon nanotubes (MWCNTs), Vulcan, and Super P to enhance its ORR activity. Among these composites, Fe‐TP/Ketjen composite exhibits an E 1/2 of 0.70 V vs. RHE and retained its ORR activity with only a 2.86% decrease in E 1/2 after 20 000 potential cycles. This superior activity and durability are attributed to coordination of iron with nitrogen and sulfur in Fe‐TP which promotes dπ–pπ interactions and the high surface area and excellent conductivity of Ketjen black. As an Al‐air battery air cathode, Fe‐TP/Ketjen delivers a peak power density of 16 mW/cm 2 , a discharge capacity of 2100 mAh/g and an open circuit voltage of 1.43 V. In situ Raman spectroscopy reveals reversible changes in the carbon environment during battery discharge and charging. These findings demonstrate the potential of Fe‐TP/Ketjen composite as a durable, noble‐metal free ORR catalyst for aluminum‐air batteries.
- Open Access
- 8 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (24) , 35034-35046
Iron-Coordinated Thiourea Formaldehyde Metal–Organic Framework for Efficient Water Splitting
A key challenge in the oxygen evolution reaction (OER) is the development of efficient and durable catalysts for applications such as water electrolyzers and metal-air batteries. Due to sluggish reaction kinetics, the OER typically requires an overpotential significantly higher than the thermodynamic potential of 1.23 V vs RHE, which limits the overall efficiency of electrochemical energy systems. In this work, we report the design and synthesis of an iron-coordinated thiourea–formaldehyde framework, denoted as (Fe-TF) n , as a nonprecious metal-based electrocatalyst for the OER. Its significance lies in the integrated coordination of iron with sulfur and nitrogen atoms within the thiourea–formaldehyde framework. This coordination enables strong dπ–pπ interactions, which enhance electron delocalization and improve electronic conductivity, thereby boosting the catalytic activity of the material. When supported on Ketjen Black, (Fe-TF) n exhibited an OER potential (E j10) of 1.53 V vs RHE at a current density of 10 mA/cm2 and demonstrated stability over 300 h of continuous operation. Furthermore, to evaluate its practical viability, the catalyst was incorporated into a membrane electrode assembly (MEA), and achieved a current density of 70 mA/cm2 at 2.1 V in a water electrolyzer.
- 8 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (24) , 35034-35046
Open AccessIron-Coordinated Thiourea Formaldehyde Metal–Organic Framework for Efficient Water Splitting
A key challenge in the oxygen evolution reaction (OER) is the development of efficient and durable catalysts for applications such as water electrolyzers and metal-air batteries. Due to sluggish reaction kinetics, the OER typically requires an overpotential significantly higher than the thermodynamic potential of 1.23 V vs RHE, which limits the overall efficiency of electrochemical energy systems. In this work, we report the design and synthesis of an iron-coordinated thiourea–formaldehyde framework, denoted as (Fe-TF) n , as a nonprecious metal-based electrocatalyst for the OER. Its significance lies in the integrated coordination of iron with sulfur and nitrogen atoms within the thiourea–formaldehyde framework. This coordination enables strong dπ–pπ interactions, which enhance electron delocalization and improve electronic conductivity, thereby boosting the catalytic activity of the material. When supported on Ketjen Black, (Fe-TF) n exhibited an OER potential (E j10) of 1.53 V vs RHE at a current density of 10 mA/cm2 and demonstrated stability over 300 h of continuous operation. Furthermore, to evaluate its practical viability, the catalyst was incorporated into a membrane electrode assembly (MEA), and achieved a current density of 70 mA/cm2 at 2.1 V in a water electrolyzer.
- Open Access
- 21 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Automated system for automatic data acquisition for PEM electrolyzer
- 21 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Open AccessAutomated system for automatic data acquisition for PEM electrolyzer
- 26 May 2025
- Published by Wiley in ChemSusChem
- p. e202500739
Cobalt Coordinated Thiourea as Metal Organic Framework for Oxygen Evolution and Reduction Reactions and Its Al–Air Battery Applications
The critical process of fuel cells, metal‐air batteries, and electrolyzers are the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which inherently have slow kinetics demand an electrocatalyst to enhance reaction rates, performance, and durability. Nonetheless, most nonprecious catalysts undergo heat treatment, involve multiple stages, and struggle with maintaining their active sites. Herein, the active sites is intended to maintain and the synthesis costs is lowered by eliminating the need for heat treatment, leading to the polymerization of cobalt thioamide linkages for a more efficient and durable cobalt thioamide polymer synthesized through a polycondensation. This coordination polymer catalyst is supported on Ketjen Black and exhibited superior OER (Ej10 = 1.57 V) and ORR (E1/2 = 0.71 V) performances. The potential efficiency during long‐term durability of this polymer is examined by performing continuous OER operation for 260 h and exhibiting only 5.1% performance decay. For ORR durability, only 39 mV is required after 30 000 cycles in accelerated durability tests compared with the initial cycle. This study highlights the potential of cobalt‐coordinated polymer on Ketjen Black as high‐performing and durable alternatives to benchmark catalysts for OER and ORR.
- 26 May 2025
- Published by Wiley in ChemSusChem
- p. e202500739
Cobalt Coordinated Thiourea as Metal Organic Framework for Oxygen Evolution and Reduction Reactions and Its Al–Air Battery Applications
The critical process of fuel cells, metal‐air batteries, and electrolyzers are the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which inherently have slow kinetics demand an electrocatalyst to enhance reaction rates, performance, and durability. Nonetheless, most nonprecious catalysts undergo heat treatment, involve multiple stages, and struggle with maintaining their active sites. Herein, the active sites is intended to maintain and the synthesis costs is lowered by eliminating the need for heat treatment, leading to the polymerization of cobalt thioamide linkages for a more efficient and durable cobalt thioamide polymer synthesized through a polycondensation. This coordination polymer catalyst is supported on Ketjen Black and exhibited superior OER (Ej10 = 1.57 V) and ORR (E1/2 = 0.71 V) performances. The potential efficiency during long‐term durability of this polymer is examined by performing continuous OER operation for 260 h and exhibiting only 5.1% performance decay. For ORR durability, only 39 mV is required after 30 000 cycles in accelerated durability tests compared with the initial cycle. This study highlights the potential of cobalt‐coordinated polymer on Ketjen Black as high‐performing and durable alternatives to benchmark catalysts for OER and ORR.
- Open Access
- 13 October 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (1) , 272-281
Bifunctional electrochemical properties of La0.8Sr0.2Co0.8M0.2O3−δ(M = Ni, Fe, Mn, and Cu): efficient elemental doping based on a structural and pH-dependent study
Perovskite oxides with a low cost and high catalytic activity are considered as suitable candidates for the oxygen evolution reaction (OER)/oxygen reduction reaction (ORR), but most of them favour only either the ORR or the OER. Besides, their underlying catalytic mechanisms are subject of an ongoing debate. Herein, La0.8Sr0.2CoO3−δ (LSC) was selected as a base perovskite oxide for doping different elements into its B-site to fabricate four different La0.8Sr0.2Co0.8M0.2O3−δ (LSCM; M = Ni, Fe, Mn, and Cu) perovskite oxides. Among the catalysts tested with and without multi-walled carbon nanotubes (MWNTs), La0.8Sr0.2Co0.8Fe0.2O3−δ (LSCF) outperformed any other catalysts in terms of both OER and ORR activity. The OER/ORR activity enhancement with LSCF is also discussed based on spectroscopic and microscopic analyses and lattice oxygen transportation.
- 13 October 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (1) , 272-281
Open AccessBifunctional electrochemical properties of La0.8Sr0.2Co0.8M0.2O3−δ(M = Ni, Fe, Mn, and Cu): efficient elemental doping based on a structural and pH-dependent study
Perovskite oxides with a low cost and high catalytic activity are considered as suitable candidates for the oxygen evolution reaction (OER)/oxygen reduction reaction (ORR), but most of them favour only either the ORR or the OER. Besides, their underlying catalytic mechanisms are subject of an ongoing debate. Herein, La0.8Sr0.2CoO3−δ (LSC) was selected as a base perovskite oxide for doping different elements into its B-site to fabricate four different La0.8Sr0.2Co0.8M0.2O3−δ (LSCM; M = Ni, Fe, Mn, and Cu) perovskite oxides. Among the catalysts tested with and without multi-walled carbon nanotubes (MWNTs), La0.8Sr0.2Co0.8Fe0.2O3−δ (LSCF) outperformed any other catalysts in terms of both OER and ORR activity. The OER/ORR activity enhancement with LSCF is also discussed based on spectroscopic and microscopic analyses and lattice oxygen transportation.
- 9 November 2020
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 3 (11) , 10961-10975
Designing an FeIII-Doped Nickel Sulfide/Carbon Nanotube Hybrid Catalyst for Alkaline Electrolyte Membrane Water Electrolyzers and Zn–Air Battery Performances
- 9 November 2020
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 3 (11) , 10961-10975
Designing an FeIII-Doped Nickel Sulfide/Carbon Nanotube Hybrid Catalyst for Alkaline Electrolyte Membrane Water Electrolyzers and Zn–Air Battery Performances
- 27 November 2019
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 10 (1) , 463-493
Surface Activation and Reconstruction of Non-Oxide-Based Catalysts Through in Situ Electrochemical Tuning for Oxygen Evolution Reactions in Alkaline Media
- 27 November 2019
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 10 (1) , 463-493
Surface Activation and Reconstruction of Non-Oxide-Based Catalysts Through in Situ Electrochemical Tuning for Oxygen Evolution Reactions in Alkaline Media
- 20 November 2019
- Published by Wiley in ChemCatChem
- Vol. 11 (24) , 5929-5944
Carbon Nanotube‐Based Non‐Precious Metal Electrode Catalysts for Fuel Cells, Water Splitting and Zinc‐Air Batteries
The design and creation of a sustainable green source of energy with a high performance is highly important. There are many approaches for this goal, and one of promising alternative energy technologies should be batteries and fuel cells. Precious metals, such as Pt and Ir, have been used as catalyst materials for fuel cells for cars and stationary power generation, water splitting, etc.; however, such metals are expensive and not earth‐abundant elements. The replacement of such precious metal‐based electrocatalysts with low‐cost materials is crucial for the next generation sustainable energy society. This minireview focuses on nanocarbons, especially carbon nanotubes, for use in the preparation of non‐precious metal catalysts for fuel cells, oxygen reduction, oxygen evolution, hydrogen evolution, water splitting and Zn‐air battery with a high performance.
- 20 November 2019
- Published by Wiley in ChemCatChem
- Vol. 11 (24) , 5929-5944
Carbon Nanotube‐Based Non‐Precious Metal Electrode Catalysts for Fuel Cells, Water Splitting and Zinc‐Air Batteries
The design and creation of a sustainable green source of energy with a high performance is highly important. There are many approaches for this goal, and one of promising alternative energy technologies should be batteries and fuel cells. Precious metals, such as Pt and Ir, have been used as catalyst materials for fuel cells for cars and stationary power generation, water splitting, etc.; however, such metals are expensive and not earth‐abundant elements. The replacement of such precious metal‐based electrocatalysts with low‐cost materials is crucial for the next generation sustainable energy society. This minireview focuses on nanocarbons, especially carbon nanotubes, for use in the preparation of non‐precious metal catalysts for fuel cells, oxygen reduction, oxygen evolution, hydrogen evolution, water splitting and Zn‐air battery with a high performance.