Qing Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qing Kang has a total of 183 co-authors. Here are the top co-authors by number of shared publications:
- Feimeng Zhou
Institute of Surface Analysis and Chemical Biology, University of Jinan, Jinan, Shandong 250022, P. R. China
9 shared publications - Jinhua Ye
Hebei University
9 shared publications - Pengcheng Wang
Department of Chemistry, University of California, Riverside, California 92521-0403, USA
8 shared publications Meng Jiang
School of Chemistry and Chemical Engineering University of Jinan Jinan, Shandong 250022 P. R. China
7 shared publicationsLequan Liu
TU-NIMS Joint Research Center, School of Materials Science and Engineering, Tianjin University, Nankai District, P. R. China
6 shared publicationsLixia Yang
Key Laboratory of Jiangxi Province for Persistent Pollutants Control and Resources Recycle, Nanchang Hangkong University, Nanchang, 330063, PR China
6 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (10) , 239
Recent Advances in Near-Infrared II-Emitting Carbon Dots for Ultrasensitive Detection of Disease-Related Biomarkers
Carbon dots (CDs) have emerged as widely used functional nanomaterials in biomedical sensing due to their tunable fluorescence emission wavelength, excellent biocompatibility, and ease of functional modification. Fluorescent CDs operating in the near-infrared region II (NIR-II, 1000–1700 nm) offer advantages such as deep tissue penetration, low tissue autofluorescence background, and a high imaging signal-to-noise ratio, making them widely used in the detection of disease biomarkers. This article systematically reviews the latest research progress of NIR-II CDs in the detection of disease-related biomarkers. Firstly, we summarize the classification of fluorescent CDs and two types of chemical synthesis strategies. Subsequently, the research progress of NIR-II CDs in the detection of disease-related physiological markers is reviewed, and the fluorescence biosensing mechanism of NIR-II CDs is analyzed in depth. Finally, we explore the advantages of NIR-II fluorescent CDs in disease diagnosis and molecular imaging, analyze their current key challenges, and provide insights into their future development directions. This review aims to garner increased attention for the development of a new generation of high-performance NIR-II fluorescent CD biosensors.
- 20 October 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (10) , 239
Open AccessRecent Advances in Near-Infrared II-Emitting Carbon Dots for Ultrasensitive Detection of Disease-Related Biomarkers
Carbon dots (CDs) have emerged as widely used functional nanomaterials in biomedical sensing due to their tunable fluorescence emission wavelength, excellent biocompatibility, and ease of functional modification. Fluorescent CDs operating in the near-infrared region II (NIR-II, 1000–1700 nm) offer advantages such as deep tissue penetration, low tissue autofluorescence background, and a high imaging signal-to-noise ratio, making them widely used in the detection of disease biomarkers. This article systematically reviews the latest research progress of NIR-II CDs in the detection of disease-related biomarkers. Firstly, we summarize the classification of fluorescent CDs and two types of chemical synthesis strategies. Subsequently, the research progress of NIR-II CDs in the detection of disease-related physiological markers is reviewed, and the fluorescence biosensing mechanism of NIR-II CDs is analyzed in depth. Finally, we explore the advantages of NIR-II fluorescent CDs in disease diagnosis and molecular imaging, analyze their current key challenges, and provide insights into their future development directions. This review aims to garner increased attention for the development of a new generation of high-performance NIR-II fluorescent CD biosensors.
- Open Access
- 19 April 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (4) , 97
Surface Plasmon Resonance Biosensors for Detection of SARS-CoV-2
Surface plasmon resonance (SPR) is a label-free, real-time biosensing technology with high sensitivity for the detection of biomolecular interactions. This review highlights recent advances in SPR biosensors for the detection of SARS-CoV-2. First, we outline design strategies, especially advanced plasmonic nanostructures and precise surface functionalization, that improve the specificity and binding affinity to viral targets. Next, we cover signal amplification methods, such as nanoparticle conjugation and plasmonic photothermal effects, which enhance the sensitivity for low-abundance viral components. Subsequently, we conducted a comparative analysis of SPR biosensors alongside traditional and emerging detection approaches for SARS-CoV-2, elucidating their individual merits and drawbacks. We also discuss how machine learning improves data interpretation and diagnostic accuracy. Finally, we discuss the current challenges and future development directions, particularly for clinical diagnostics, epidemic monitoring, and public health security. These advances support faster, more reliable, and accessible diagnostics for current and future viral outbreaks.
- 19 April 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (4) , 97
Open AccessSurface Plasmon Resonance Biosensors for Detection of SARS-CoV-2
Surface plasmon resonance (SPR) is a label-free, real-time biosensing technology with high sensitivity for the detection of biomolecular interactions. This review highlights recent advances in SPR biosensors for the detection of SARS-CoV-2. First, we outline design strategies, especially advanced plasmonic nanostructures and precise surface functionalization, that improve the specificity and binding affinity to viral targets. Next, we cover signal amplification methods, such as nanoparticle conjugation and plasmonic photothermal effects, which enhance the sensitivity for low-abundance viral components. Subsequently, we conducted a comparative analysis of SPR biosensors alongside traditional and emerging detection approaches for SARS-CoV-2, elucidating their individual merits and drawbacks. We also discuss how machine learning improves data interpretation and diagnostic accuracy. Finally, we discuss the current challenges and future development directions, particularly for clinical diagnostics, epidemic monitoring, and public health security. These advances support faster, more reliable, and accessible diagnostics for current and future viral outbreaks.
- 16 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12729-12737
Effects of Nitrogen-Doped Carbon Support on the Electrocatalytic Behavior of Co Nanoparticles for Oxygen Evolution Reaction in Neutral Media
Proton exchange membrane-based water electrolysis (PEM-WE) offers significant benefits over traditional alkaline water electrolysis and has become a highly potential approach for generating hydrogen. To enable efficient PEM-WE in neutral media, the activity of cobalt (Co)-based materials for the oxygen evolution reaction (OER) has been considerably improved by tuning the electronic configuration. Nevertheless, electrocatalyst-substrate interactions and the role of supports in OER performance have not been thoroughly investigated. Herein, we looked into how a porous nitrogen-doped carbon (NC) support affected the electrocatalytic performance of small cobalt nanoparticles (Co NPs) for OER in a neutral environment. A series of experiments and density functional theory (DFT) calculations indicated that the strong coupling of Co NPs and NC support contributed to the coordination of Co with graphitic N, which in turn resulted in modulating the local electron structure around the Co atom center and diminishing the energy barriers for intermediates and the change in Gibbs free energy for the rate-limiting step. The OER activity of optimal Co NPs anchored on porous NC support (Co/NC) was significantly elevated, delivering an overpotential of merely 418 mV at 10 mA cm-2 and a favorable Tafel slope of 136 mV dec-1 in neutral 1 M phosphate-buffered saline (PBS) containing 0.5 M NaCl, as well as exhibiting long-term stability. This remarkable OER-catalyzing ability outperformed the majority of previously reported transition metal-based electrocatalysts. This study provides a universal and scalable method for adjusting catalyst-support interactions for electrocatalytic reactions and other processes.
- 16 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12729-12737
Effects of Nitrogen-Doped Carbon Support on the Electrocatalytic Behavior of Co Nanoparticles for Oxygen Evolution Reaction in Neutral Media
Proton exchange membrane-based water electrolysis (PEM-WE) offers significant benefits over traditional alkaline water electrolysis and has become a highly potential approach for generating hydrogen. To enable efficient PEM-WE in neutral media, the activity of cobalt (Co)-based materials for the oxygen evolution reaction (OER) has been considerably improved by tuning the electronic configuration. Nevertheless, electrocatalyst-substrate interactions and the role of supports in OER performance have not been thoroughly investigated. Herein, we looked into how a porous nitrogen-doped carbon (NC) support affected the electrocatalytic performance of small cobalt nanoparticles (Co NPs) for OER in a neutral environment. A series of experiments and density functional theory (DFT) calculations indicated that the strong coupling of Co NPs and NC support contributed to the coordination of Co with graphitic N, which in turn resulted in modulating the local electron structure around the Co atom center and diminishing the energy barriers for intermediates and the change in Gibbs free energy for the rate-limiting step. The OER activity of optimal Co NPs anchored on porous NC support (Co/NC) was significantly elevated, delivering an overpotential of merely 418 mV at 10 mA cm-2 and a favorable Tafel slope of 136 mV dec-1 in neutral 1 M phosphate-buffered saline (PBS) containing 0.5 M NaCl, as well as exhibiting long-term stability. This remarkable OER-catalyzing ability outperformed the majority of previously reported transition metal-based electrocatalysts. This study provides a universal and scalable method for adjusting catalyst-support interactions for electrocatalytic reactions and other processes.
- Open Access
- 21 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (12) , 6165-6177
Nanoscale Ru unlocking nanoneedles assembled into hierarchical CoO microspheres for efficient nitrate-to-ammonia electroconversion
The CoO/Ru hybrid electrocatalyst exhibited competitive electrocatalytic performance during efficient nitrate-to-ammonia electroconversion, benefiting from the cooperative contributions from intrinsic compositional/structural merits.
- 21 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (12) , 6165-6177
Open AccessNanoscale Ru unlocking nanoneedles assembled into hierarchical CoO microspheres for efficient nitrate-to-ammonia electroconversion
The CoO/Ru hybrid electrocatalyst exhibited competitive electrocatalytic performance during efficient nitrate-to-ammonia electroconversion, benefiting from the cooperative contributions from intrinsic compositional/structural merits.
- 2 May 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 582
Tuning Co2+ active sites over Co3O4 for boosting electrocatalytic oxygen evolution in neutral media
- 2 May 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 582
Tuning Co2+ active sites over Co3O4 for boosting electrocatalytic oxygen evolution in neutral media
- 21 November 2024
- Published by Wiley in Chemphyschem
- Vol. 26 (2) , e202400484
Size Effects of Gold Nanoparticles on Surface Plasmon Resonance Assays for DNA Hybridization
Recent advancements in signal amplifiers, such as biofunctionalized gold nanoparticles (AuNPs) have improved the surface plasmon resonance (SPR) performance. However, the correlation between the sizes of DNA−Au conjugates and the SPR chips remains elusive. We investigated how the size of AuNPs functioned with DNA detection probes (D−AuNPs) affect SPR signals in sandwich DNA hybridization assays. The effects of three sizes (5, 13, and 29 nm) of D−AuNPs with an equal surface probe density were systematically compared to delineate the relationship between signal amplification and steric hindrance. Sporadically adsorbed target DNA on sparse capture probe‐coated chips led to a growth of signal amplification with larger D−AuNPs. In contrast, on dense capture probe‐coated SPR chips, when the target DNA concentration was above 1.5 nM, the medium‐sized 13 nm AuNPs displayed 1.7‐ and 1.3‐fold enhancement factors than 5 nm and 29 nm ones, respectively. Our results indicate the steric hindrance disturbs the capture of D−AuNPs on dense target DNA‐modified chips, rendering the surface density of captured D−AuNPs a determining factor of the sensor response. Alternatively, the sensor sensitivity to D−AuNP surface density is crucial on chips with sparse target DNA. These insights should stimulate and guide future research on surface functionalization toward SPR sensors and AuNPs.
- 21 November 2024
- Published by Wiley in Chemphyschem
- Vol. 26 (2) , e202400484
Size Effects of Gold Nanoparticles on Surface Plasmon Resonance Assays for DNA Hybridization
Recent advancements in signal amplifiers, such as biofunctionalized gold nanoparticles (AuNPs) have improved the surface plasmon resonance (SPR) performance. However, the correlation between the sizes of DNA−Au conjugates and the SPR chips remains elusive. We investigated how the size of AuNPs functioned with DNA detection probes (D−AuNPs) affect SPR signals in sandwich DNA hybridization assays. The effects of three sizes (5, 13, and 29 nm) of D−AuNPs with an equal surface probe density were systematically compared to delineate the relationship between signal amplification and steric hindrance. Sporadically adsorbed target DNA on sparse capture probe‐coated chips led to a growth of signal amplification with larger D−AuNPs. In contrast, on dense capture probe‐coated SPR chips, when the target DNA concentration was above 1.5 nM, the medium‐sized 13 nm AuNPs displayed 1.7‐ and 1.3‐fold enhancement factors than 5 nm and 29 nm ones, respectively. Our results indicate the steric hindrance disturbs the capture of D−AuNPs on dense target DNA‐modified chips, rendering the surface density of captured D−AuNPs a determining factor of the sensor response. Alternatively, the sensor sensitivity to D−AuNP surface density is crucial on chips with sparse target DNA. These insights should stimulate and guide future research on surface functionalization toward SPR sensors and AuNPs.
- Open Access
Electrochemical Upgrading of Waste Polylactic Acid Plastic for the Coproduction of C2 Chemicals and Green Hydrogen
Tandem alkali-catalyzed hydrolysis and alkaline electrolysis have gradually become appealing avenues for the reformation of polyester plastics into high-value-added chemicals and green hydrogen with remarkable environmental and economic benefits. In this study, an electrochemical upcycling strategy was developed for the electrocatalytic oxidation of polylactic acid (PLA) hydrolysate into valued C2 chemicals (i.e., acetate) and hydrogen fuel using N, P-doped CuOx nanowires (NW) supported on nickel foam (NF) as the electrocatalyst. This 3D well-integrated catalyst was easily prepared from a Cu(OH)2 NW/NF precursor with Saccharomycetes as a green and safe P and N source. The electrocatalyst can efficiently catalyze the lactate monomer derived from the hydrolysis of PLA waste to acetate with high selectivity and exhibits a lower onset potential for the lactate oxidation reaction (LOR) than for water oxidation, saving 224 mV to deliver a current density of 30 mA/cm2. The experimental results reveal that the plausible pathway of the LOR on these CuOx NW involves oxidation and subsequent decarboxylation. Divalent copper species have been verified to be active sites for LOR via in situ Raman spectroscopy.
Open AccessElectrochemical Upgrading of Waste Polylactic Acid Plastic for the Coproduction of C2 Chemicals and Green Hydrogen
Tandem alkali-catalyzed hydrolysis and alkaline electrolysis have gradually become appealing avenues for the reformation of polyester plastics into high-value-added chemicals and green hydrogen with remarkable environmental and economic benefits. In this study, an electrochemical upcycling strategy was developed for the electrocatalytic oxidation of polylactic acid (PLA) hydrolysate into valued C2 chemicals (i.e., acetate) and hydrogen fuel using N, P-doped CuOx nanowires (NW) supported on nickel foam (NF) as the electrocatalyst. This 3D well-integrated catalyst was easily prepared from a Cu(OH)2 NW/NF precursor with Saccharomycetes as a green and safe P and N source. The electrocatalyst can efficiently catalyze the lactate monomer derived from the hydrolysis of PLA waste to acetate with high selectivity and exhibits a lower onset potential for the lactate oxidation reaction (LOR) than for water oxidation, saving 224 mV to deliver a current density of 30 mA/cm2. The experimental results reveal that the plausible pathway of the LOR on these CuOx NW involves oxidation and subsequent decarboxylation. Divalent copper species have been verified to be active sites for LOR via in situ Raman spectroscopy.
- 2 February 2024
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (2) , 759-769
Eu3+-Doped Anionic Zinc-Based Organic Framework Ratio Fluorescence Sensing Platform: Supersensitive Visual Identification of Prescription Drugs
Advanced techniques for both environmental and biological prescription drug monitoring are of ongoing interest. In this work, a fluorescent sensor based on an Eu3+-doped anionic zinc-based metal-organic framework (Eu3+@Zn-MOF) was constructed for rapid visual analysis of the prescription drug molecule demecycline (DEM), achieving both high sensitivity and selectivity. The ligand 2-amino-[1,1'-biphenyl]-4,4'-dicarboxylic acid (bpdc-NH2) not only provides stable cyan fluorescence (467 nm) for the framework through intramolecular charge transfer of bpdc-NH2 infinitesimal disturbanced by Zn2+ but also chelates Eu3+, resulting in red (617 nm) fluorescence. Through the synergy of photoinduced electron transfer and the antenna effect, a bidirectional response to DEM is achieved, enabling concentration quantification. The Eu3+@Zn-MOF platform exhibits a wide linear range (0.25-2.5 μM) to DEM and a detection limit (LOD) of 10.9 nM. Further, we integrated the DEM sensing platform into a paper-based system and utilized a smartphone for the visual detection of DEM in water samples and milk products, demonstrating the potential for large-scale, low-cost utilization of the technology.
- 2 February 2024
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (2) , 759-769
Eu3+-Doped Anionic Zinc-Based Organic Framework Ratio Fluorescence Sensing Platform: Supersensitive Visual Identification of Prescription Drugs
Advanced techniques for both environmental and biological prescription drug monitoring are of ongoing interest. In this work, a fluorescent sensor based on an Eu3+-doped anionic zinc-based metal-organic framework (Eu3+@Zn-MOF) was constructed for rapid visual analysis of the prescription drug molecule demecycline (DEM), achieving both high sensitivity and selectivity. The ligand 2-amino-[1,1'-biphenyl]-4,4'-dicarboxylic acid (bpdc-NH2) not only provides stable cyan fluorescence (467 nm) for the framework through intramolecular charge transfer of bpdc-NH2 infinitesimal disturbanced by Zn2+ but also chelates Eu3+, resulting in red (617 nm) fluorescence. Through the synergy of photoinduced electron transfer and the antenna effect, a bidirectional response to DEM is achieved, enabling concentration quantification. The Eu3+@Zn-MOF platform exhibits a wide linear range (0.25-2.5 μM) to DEM and a detection limit (LOD) of 10.9 nM. Further, we integrated the DEM sensing platform into a paper-based system and utilized a smartphone for the visual detection of DEM in water samples and milk products, demonstrating the potential for large-scale, low-cost utilization of the technology.
- 20 March 2023
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 20 (4) , 2094-2104
Live Cells versus Fixated Cells: Kinetic Measurements of Biomolecular Interactions with the LigandTracer Method and Surface Plasmon Resonance Microscopy
Cell-based kinetic studies of ligand or candidate drug binding to membrane proteins have produced affinity and kinetic values that are different from measurements using purified proteins. However, ligand binding to fixated cells whose membrane constituents (e.g., proteins and their glycosylated forms) are partially connected by a cross-linking reagent has not been compared to that to live cells. Under the same experimental conditions for the LigandTracer method, we measured the interactions of fluorophore-labeled lectins and antibody molecules with glycans at HFF cells and the human epithelial growth receptor 2 at SKBR3 cells, respectively. In conjunction with surface plasmon resonance microscopy, the effects of labels and cell/sub-cell heterogeneity on binding kinetics were investigated. Our results revealed that, for cell constituents whose structures and functions are not closely dependent on cell viability, the ligand binding kinetics at fixated cells is only slightly different from that at live cells. The altered kinetics is explained on the basis of a less mobile receptor confined in a local environment created by partially interconnected protein molecules. We show that cell/sub-cell heterogeneity and labels on the ligands can alter the binding reaction more significantly. Thus, fixating cells not only simplifies experimental procedures for drug screening and renders assays more robust but also provides reliable kinetic information about drug binding to cell constituents whose structures are not changed by chemical fixation.
- 20 March 2023
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 20 (4) , 2094-2104
Live Cells versus Fixated Cells: Kinetic Measurements of Biomolecular Interactions with the LigandTracer Method and Surface Plasmon Resonance Microscopy
Cell-based kinetic studies of ligand or candidate drug binding to membrane proteins have produced affinity and kinetic values that are different from measurements using purified proteins. However, ligand binding to fixated cells whose membrane constituents (e.g., proteins and their glycosylated forms) are partially connected by a cross-linking reagent has not been compared to that to live cells. Under the same experimental conditions for the LigandTracer method, we measured the interactions of fluorophore-labeled lectins and antibody molecules with glycans at HFF cells and the human epithelial growth receptor 2 at SKBR3 cells, respectively. In conjunction with surface plasmon resonance microscopy, the effects of labels and cell/sub-cell heterogeneity on binding kinetics were investigated. Our results revealed that, for cell constituents whose structures and functions are not closely dependent on cell viability, the ligand binding kinetics at fixated cells is only slightly different from that at live cells. The altered kinetics is explained on the basis of a less mobile receptor confined in a local environment created by partially interconnected protein molecules. We show that cell/sub-cell heterogeneity and labels on the ligands can alter the binding reaction more significantly. Thus, fixating cells not only simplifies experimental procedures for drug screening and renders assays more robust but also provides reliable kinetic information about drug binding to cell constituents whose structures are not changed by chemical fixation.