ABAlice Marie Barthel

Alice Marie Barthel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alice Marie Barthel has a total of 279 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Energy Exascale Earth System Model version 3: 3. Overview of historical and near-future large ensemble

    by Wuyin Lin, Shixuan Zhang, Jean-Christophe Golaz, Xue Zheng, Andrew Roberts, Shaocheng Xie, Yan Feng, Salil Mahajan, Luke P. Van Roekel, James J Benedict, et al.

    This manuscript documents and evaluates the Energy Exascale Earth System Model version 3 initial-condition large ensemble (E3SMv3-LE), a new community resource designed to support studies of forced responses, internal variability, extremes, and coupled Earth system processes. The ensemble consists of 25 fully coupled simulations spanning 1850-2050, using CMIP6 historical forcings through 2014 and the SSP2-4.5 scenario thereafter. We provide an overview of the simulation behavior across the atmosphere, land, ocean, and cryosphere. The analysis first examines the historical and near-future evolution of key coupled-system indicators under the influences of external forcings, which shows coherent responses across the components. We then assess historical changes in mean state and ensemble spread, and place E3SMv3 performance in the context of CMIP6 model behavior. The manuscript further characterizes simulated extremes, including trends in surface temperature extremes, time of emergence of persisting extreme heat, probability estimation of regional heatwave events and their change over time, and drought trend. Finally, we evaluate major modes of variability and teleconnections, including extratropical modes, ENSO and other tropical variability, with emphasis on both historical fidelity and near-future change. Overall, the simulation performance of E3SMv3-LE is on par with the leading CMIP6 models in these broad-based metrics. The large ensemble provides a physically consistent, multi-component framework for quantifying forced responses and the role of internal variability through mid-century. By documenting the simulations, and evaluating their strengths and limitations, this manuscript establishes E3SMv3-LE as a resource for broader community use in Earth system variability, changes, impacts, and predictability research.

  • Open Access

    Simulated and observed transport estimates across the Overturning in the Subpolar North Atlantic Program (OSNAP) sections

    by Gokhan Danabasoglu, Frederic S. Castruccio, Burcu Boza, Alice M. Barthel, Arne Biastoch, Adam Blaker, Alexandra Bozec, Diego Bruciaferri, Frank O. Bryan, Eric P. Chassignet, et al.

    A comparison of simulated and observed overturning transports and related properties across the Overturning in the Subpolar North Atlantic Program (OSNAP) sections for the 2014–2022 period is presented, considering both depth and density space transports. The effort was motivated by the observational transport estimates at both OSNAP-West (OW) and OSNAP-East (OE) sections which show a minor role for the Labrador Sea (LS) in setting the mean and variability of the overturning in the subpolar North Atlantic. There are 9 participating groups from around the world, contributing a total of 18 ocean – sea-ice simulations with 6 different ocean models. The simulations use a common set of interannually varying atmospheric forcing datasets. The horizontal resolutions of the simulations range from nominal 1° to eddy-resolving resolutions of 0.1–0.05°. While there are many differences between the simulations and observations as well as among the individual simulations in terms of transport properties, the simulations show significantly larger transports at OE than at OW in agreement with the observations. Analyzing overturning circulations in both depth and density space together provides a more complete picture of the overturning properties and features. This analysis also reveals that, in both the simulations and observations, northward and southward flows substantially cancel each other at a given depth or density, producing much smaller residual (total) transports. Such cancellations tend to be much more prominent in depth space than in density space. In general, the observed transport features are captured better at OE than OW. The simulations generally show larger (smaller) transports with positive (negative) temperature and salinity biases in the upper ocean near the OSNAP sections, but with no such relationship with density biases. In high-resolution simulations, the transport profiles agree better with the observations, but challenges remain in some other metrics considered in our analysis. When transports are calculated using a density referenced to 2000 m depth, rather than the ocean surface, the relative contributions of transports at OW increase modestly.


  • Open Access

    The ocean model for E3SM global applications: Omega version 0.1.0 – a new high-performance computing code for exascale architectures

    by Mark R. Petersen, Xylar S. Asay-Davis, Alice M. Barthel, Carolyn Branecky Begeman, Siddhartha Bishnu, Steven R. Brus, Philip W. Jones, Hyun-Gyu Kang, Youngsung Kim, Azamat Mametjanov, et al.

    This paper introduces Omega, the Ocean Model for E3SM Global Applications. Omega is a new ocean model designed to run efficiently on high performance computing (HPC) platforms, including exascale heterogeneous architectures with accelerators, such as Graphics Processing Units (GPUs). Omega is written in C++ and uses the Kokkos performance portability library. These were chosen because they are well-supported and will help future-proof Omega for upcoming HPC architectures. Omega will eventually replace the Model for Prediction Across Scales-Ocean (MPAS-Ocean) in the US Department of Energy's (DOE's) Energy Exascale Earth System Model (E3SM). Omega runs on unstructured horizontal meshes with variable-resolution capability and implements the same horizontal discretization as MPAS-Ocean. This work documents the design and performance of Omega Version 0.1.0 (Omega-V0), which solves the shallow water equations with passive tracers and is the first step towards the full primitive equation ocean model. On Central Processing Units (CPUs), Omega-V0 is 1.4 times faster than MPAS-Ocean with the same configuration. Omega-V0 is more efficient on GPUs than CPUs on a per-watt basis – by a factor of 5.3 on Frontier and 3.6 on Aurora, two of the world's fastest exascale computers.


  • Open Access

    Surface freshening contributes to weak Atlantic Meridional Overturning Circulation (AMOC) in non-eddying ocean simulations

    by Usdoe National Nuclear Security Administration (Nnsa), Benjamin Lee Moore-Maley, Julie L. McClean, Alice Marie Barthel, Sarah T. Gille, Luke Van Roekel

  • Top Cited Papers
    Open Access

    The Energy Exascale Earth System Model Version 3: 2. Overview of the Coupled System

    by Jean‐Christophe Golaz, Wuyin Lin, Xue Zheng, Shaocheng Xie, Andrew F. Roberts, Luke P. Van Roekel, Peter E. Thornton, Alice M. Barthel, Andrew M. Bradley, Jonathan D. Wolfe, et al.

    The Energy Exascale Earth System Model version 3 (E3SMv3) represents the latest advancement in Earth system modeling developed by the U.S. Department of Energy (DOE). Building upon previous versions, E3SMv3 introduces significant updates across its coupled components to enhance capability and improve fidelity. The atmosphere component incorporates advancements in chemistry, aerosol‐cloud interactions, convection, and microphysics. The ocean features a new time‐stepping scheme and a higher‐resolution unstructured mesh with sub‐ice‐shelf cavities, while the sea ice model integrates advanced snow and ice physics for more realistic cryospheric simulations. The land model introduces prognostic vegetation dynamics and a new sub‐grid topographic treatment of solar radiation. A new tri‐grid configuration harmonizes the horizontal grids of the land and river components for improved process coupling. It is enabled by a new non‐linear remapping between the atmosphere and land. E3SMv3 underwent extensive testing through a comprehensive simulation campaign, including pre‐industrial control, idealized experiments, and historical simulations spanning 1850–2024. The model demonstrates significant improvements in simulating the evolution of the historical surface temperature, particularly addressing the “pothole cooling” bias in earlier versions. Reduced aerosol‐related forcing contributes to more realistic radiative forcing and better alignment with the observational record. Ocean heat content (OHC) and sea ice trends are also improved as a result.


  • Open Access

    Subpolar North Atlantic Water Mass Transformation and Overturning in Eddying and Non‐Eddying Simulations

    by Ben Moore‐Maley, Julie L. McClean, Alice M. Barthel, Sarah T. Gille, Luke P. Van Roekel

  • Open Access

    Reply on RC2

    by Mark R. Petersen, Xylar S. Asay-Davis, Alice M. Barthel, Carolyn Branecky Begeman, Siddhartha Bishnu, Steven R. Brus, Philip W. Jones, Hyun-Gyu Kang, Youngsung Kim, Azamat Mametjanov, et al.

    Here we introduce Omega, the Ocean Model for E3SM Global Applications. Omega is a new ocean model designed to run efficiently on high performance computing (HPC) platforms, including exascale heterogeneous architectures with accelerators, such as Graphics Processing Units (GPUs). Omega is written in C++ and uses the Kokkos performance portability library. These were chosen because they are well-supported, and will help future-proof Omega for upcoming HPC architectures. Omega will eventually replace the Model for Prediction Across Scales-Ocean (MPAS-Ocean) in the US Department of Energy's Energy Exascale Earth System Model (E3SM). Omega runs on unstructured horizontal meshes with variable-resolution capability and implements the same horizontal discretization as MPAS-Ocean. In this paper, we document the design and performance of Omega Version 0.1.0 (Omega-V0), which solves the shallow water equations with passive tracers and is the first step towards the full primitive equation ocean model. On Central Processing Units (CPUs), Omega-V0 is 1.4 times faster than MPAS-Ocean with the same configuration. Omega-V0 is more efficient on GPUs than CPUs on a per-watt basis–by a factor of 5.3 on Frontier and 3.6 on Aurora, two of the world's fastest exascale computers.

  • Open Access

    Reply on RC1

    by Mark R. Petersen, Xylar S. Asay-Davis, Alice M. Barthel, Carolyn Branecky Begeman, Siddhartha Bishnu, Steven R. Brus, Philip W. Jones, Hyun-Gyu Kang, Youngsung Kim, Azamat Mametjanov, et al.

    Here we introduce Omega, the Ocean Model for E3SM Global Applications. Omega is a new ocean model designed to run efficiently on high performance computing (HPC) platforms, including exascale heterogeneous architectures with accelerators, such as Graphics Processing Units (GPUs). Omega is written in C++ and uses the Kokkos performance portability library. These were chosen because they are well-supported, and will help future-proof Omega for upcoming HPC architectures. Omega will eventually replace the Model for Prediction Across Scales-Ocean (MPAS-Ocean) in the US Department of Energy's Energy Exascale Earth System Model (E3SM). Omega runs on unstructured horizontal meshes with variable-resolution capability and implements the same horizontal discretization as MPAS-Ocean. In this paper, we document the design and performance of Omega Version 0.1.0 (Omega-V0), which solves the shallow water equations with passive tracers and is the first step towards the full primitive equation ocean model. On Central Processing Units (CPUs), Omega-V0 is 1.4 times faster than MPAS-Ocean with the same configuration. Omega-V0 is more efficient on GPUs than CPUs on a per-watt basis–by a factor of 5.3 on Frontier and 3.6 on Aurora, two of the world's fastest exascale computers.

  • Open Access

    Comment on egusphere-2025-5406

    by Gokhan Danabasoglu, Frederic S. Castruccio, Burcu Boza, Alice M. Barthel, Arne Biastoch, Adam Blaker, Alexandra Bozec, Diego Bruciaferri, Frank O. Bryan, Eric P. Chassignet, et al.

    A comparison of simulated and observed overturning transports and related properties across the Overturning in the Subpolar North Atlantic Program (OSNAP) sections for the 2014–2022 period is presented, considering both depth and density space transports. The effort was motivated by the observational transport estimates at both OSNAP-West (OW) and OSNAP-East (OE) sections which show a minor role for the Labrador Sea (LS) in setting the mean and variability of the overturning in the subpolar North Atlantic. There are 9 participating groups from around the world, contributing a total of 18 ocean – sea simulations with 6 different ocean models. The simulations use a common set of interannually-varying atmospheric forcing datasets. The horizontal resolutions of the simulations range from nominal 1° to eddy-resolving resolutions of 0.1°–0.05°. While there are many differences between the simulations and observations as well as among the individual simulations in terms of transport properties, the simulations show significantly larger transports at OE than at OW in general agreement with the observations. Analyzing overturning circulations in both depth and density space together provides a more complete picture of the overturning properties and features. This analysis also reveals that, in both the simulations and observations, northward and southward flows substantially cancel each other, producing much smaller residual (total) transports. Such cancellations tend to be much more prominent in depth space than in density space. In general, the observed transport features are captured better at OE than OW. The simulations generally show larger (smaller) transports with positive (negative) temperature and salinity biases in the upper ocean near the OSNAP sections, but with no such relationship with density biases. In high-resolution simulations, the transport profiles agree better with the observations in general, but challenges remain in some other metrics considered in our analysis. When transports are calculated using a density referenced to 2000-m depth, rather than the ocean surface, the relative contributions of transports at OW increase modestly.

  • Open Access

    Comment on egusphere-2025-5406

    by Gokhan Danabasoglu, Frederic S. Castruccio, Burcu Boza, Alice M. Barthel, Arne Biastoch, Adam Blaker, Alexandra Bozec, Diego Bruciaferri, Frank O. Bryan, Eric P. Chassignet, et al.

    A comparison of simulated and observed overturning transports and related properties across the Overturning in the Subpolar North Atlantic Program (OSNAP) sections for the 2014–2022 period is presented, considering both depth and density space transports. The effort was motivated by the observational transport estimates at both OSNAP-West (OW) and OSNAP-East (OE) sections which show a minor role for the Labrador Sea (LS) in setting the mean and variability of the overturning in the subpolar North Atlantic. There are 9 participating groups from around the world, contributing a total of 18 ocean – sea simulations with 6 different ocean models. The simulations use a common set of interannually-varying atmospheric forcing datasets. The horizontal resolutions of the simulations range from nominal 1° to eddy-resolving resolutions of 0.1°–0.05°. While there are many differences between the simulations and observations as well as among the individual simulations in terms of transport properties, the simulations show significantly larger transports at OE than at OW in general agreement with the observations. Analyzing overturning circulations in both depth and density space together provides a more complete picture of the overturning properties and features. This analysis also reveals that, in both the simulations and observations, northward and southward flows substantially cancel each other, producing much smaller residual (total) transports. Such cancellations tend to be much more prominent in depth space than in density space. In general, the observed transport features are captured better at OE than OW. The simulations generally show larger (smaller) transports with positive (negative) temperature and salinity biases in the upper ocean near the OSNAP sections, but with no such relationship with density biases. In high-resolution simulations, the transport profiles agree better with the observations in general, but challenges remain in some other metrics considered in our analysis. When transports are calculated using a density referenced to 2000-m depth, rather than the ocean surface, the relative contributions of transports at OW increase modestly.