SPSujitra Pookpanratana

Sujitra Pookpanratana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sujitra Pookpanratana has a total of 115 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Impact of prebonding plasma treatment on indium

    by K. L. Steffens, J. Song, M. Davanco, T. Lucas, J. Biesecker, D. Schmidt, S. Pookpanratana

    Bonding between materials is a critical step in fabricating advanced microelectronic components. Bonding typically requires processing steps, such as plasma treatment, to ensure high yield success. While plasma treatment may be functionally necessary, the plasma effects leading to bonding improvement are poorly understood, which hinders development of new protocols. We have addressed this gap using x-ray and ultraviolet photoelectron spectroscopies to probe changes in surface chemical composition. Here, we explore the plasma gas parameter space containing hydrogen, helium, and nitrogen on indium thin films as a model system for the indium contacts used in cryogenic electronic applications. We find that, for all plasma treatments, carbon-containing contaminants are effectively removed, especially those containing C—C bonds. Conversely, indium is found to be more highly oxidized after plasma treatment and subsequent brief exposure to air during transfer to the analysis chamber. Nitrogen is observed on all indium surfaces including control and reference samples, for which likely nitrogen origins are discussed. Nitrogen-containing plasma treatments on the indium films cause the appearance of an oxidized nitrate component. Considering it has been found that nitrogen-containing plasmas produce poorer bond strength and uniformity, we postulate that the presence of nitrate species inhibits uniform bonding. We also discuss the consistent trends in oxide, indium metal, and other component intensities observed for plasmas containing only hydrogen/helium, only nitrogen/helium, or a mix of both hydrogen and nitrogen with helium. Improved understanding of plasma impact on surface chemistry will facilitate informed development of new plasma treatment protocols.

  • Open Access

    Editor’s Choice—Influence of ITO and AlN Capping on Magnesium Diffusion and Chemical Doping in GaN

    by H E Dishman, S J Pookpanratana, O R Meilander, M A Ebrish

    Selective p- type doping in GaN requires high-temperature processing to activate magnesium (Mg) acceptors while preserving material integrity. Although capping layers are commonly used to suppress GaN decomposition during annealing, their influence on Mg incorporation and chemical-state evolution remains unclear. In this work, indium tin oxide (ITO) was investigated as an alternative capping material for Mg diffusion in GaN and compared with conventional AlN caps. AFM revealed improved surface morphology for ITO-capped samples, with approximately twofold lower surface roughness after cap removal. SIMS and STEM/EDS confirmed Mg incorporation in the near-surface GaN region for both capping schemes, while showing reduced Mg accumulation at the surface for ITO-capped samples. X-ray photoelectron spectroscopy (XPS) revealed Mg oxidation states, with ITO-capped samples exhibiting an Mg 1s binding energy consistent with Mg 2+ incorporation, whereas AlN-capped samples showed a response more characteristic of metallic Mg. Circular transmission line method (CTLM) measurements demonstrated a specific contact resistivity of 16.8 ± 0.8 mΩ·cm 2 for ITO-capped samples compared with 19.8 ± 0.9 mΩ·cm 2 for AlN-capped samples. These results indicate that capping-layer selection influences Mg redistribution, chemical-state evolution, and the resulting electrical performance of p -GaN, establishing ITO as a viable alternative to AlN for selective Mg diffusion.

  • Observation and analysis of nine orders of magnitude memory window in pn GaN regrowth vertical diodes

    by S. J. Moxim, J. Comanescu, C. A. Voigt, O. Maimon, B. H. Hamadani, A. Winchester, E. Bittle, Q. Li, T. J. Anderson, J. K. Hite, et al.

    Wide bandgap semiconductors, including gallium nitride (GaN), are crucial for next-generation power electronics due to their superior properties compared to silicon. However, challenges in their fabrication, particularly with epitaxial regrowth for vertical diode device structures, can introduce defects that impact performance. In this study, we report on vertical GaN pn diodes that exhibit an exceptionally large hysteresis loop with on/off ratios exceeding nine orders of magnitude, a behavior absent in devices grown in situ without changing growth reactors. We demonstrate that these devices exhibit robust endurance, maintaining a stable memory window for over 60 000 switching cycles at room temperature (20 °C), and remain partially viable up to at least 275 °C. Through analytical characterization, including secondary ion mass spectrometry and electroluminescence, we provide evidence that the hysteresis behavior is linked to a defect-rich interface region containing silicon and carbon impurities. To further investigate the underlying mechanism, we developed a technology computer aided design model that successfully replicates the observed hysteresis and identifies the likely mechanisms involved, key attributes of which include interfacial barriers, fixed negative charge, and positive charge trapping. These findings highlight a critical challenge for traditional GaN power devices while also demonstrating their potential for novel high-temperature memory applications.

  • Impact of Deep-Level Traps on Carrier Mobility in β -Ga 2 O 3 MOSFETs

    by O. Maimon, N. A. Moser, P. R. Shrestha, M.-Y. Kim, S.-M. Koo, K. J. Liddy, A. J. Green, K. D. Chabak, Sujitra Pookpanratana, Qiliang Li

    Beta-phase gallium oxide ( $\beta $ -Ga2O ${}_{{3}}\text {)}$ is a promising semiconductor for high-power and high-frequency electronics due to its ultra-wide bandgap (UWBG) and high breakdown field. However, the carrier mobility in $\beta $ -Ga2O3-based metal-oxide-semiconductor field-effect transistors (MOSFETs) remains significantly lower than its theoretical limit, often attributed to the presence of deep-level traps. In this work, an electro-optical measurement technique is used to study ionized impurity scattering by deep-level traps in lateral depletion-mode $\beta $ -Ga2O3 field-effect transistors (FETs). Using the conductance method and photo-assisted capacitance-voltage (PCV) measurements with sub-bandgap illumination from 730 nm (1.7 eV) to 280 nm (4.4 eV), the density of interface trap states (D ${}_{\text {it}}\text {)}$ in $\beta $ -Ga2O3 FETs was determined between 0.4 and 4.4 eV below the conduction band (E ${}_{\text {C}}\text {)}$ of $\beta $ -Ga2O3. Dit peaks near the band edges, similar to conventional material systems. Based on the results, traps located between EC–4.0 eV and EC–3.4 eV are primarily responsible for carrier scattering, reducing the mobility by 50%–75% in these devices with increasing distance from the interface. The increased mobility degradation further from the interface is attributed to traps located in the bulk.

  • Electronic properties of extended surface defects in homoepitaxial GaN diodes

    by Andrew J. Winchester, Valery Ortiz Jimenez, Dara Weiss, Curt A. Richter, Behrang H. Hamadani, Michael A. Mastro, Travis J. Anderson, Jennifer K. Hite, Sujitra Pookpanratana

    GaN on GaN vertical power devices are promising for high voltage applications beyond Si and SiC. Developing GaN substrates with low defect densities for high-quality epitaxial growth has been an ongoing challenge. Consequently, extended defects are a concern for high power device performance and reliability and must be mitigated. In particular, newer ammonothermally grown GaN substrates with lower extended defect densities have not yet been evaluated as extensively as hydride vapor phase epitaxy GaN. Here, we identify different electrically active defects on epitaxial p-GaN layers grown on strain-patterned (dot-core) and ammonothermal GaN substrates. On dot-core substrates, “star” defects were observed that consist of pits and cracks, have an increased hole carrier density, display occupied bandgap states, and show reduced and variable forward bias currents. In contrast, on ammonothermal substrates, triangular patches were found on certain rough epitaxy ridges and show increased gap states along with a lower carrier density and reduced conductivity. The star and triangular defects likely correspond to threading dislocations and stacking faults, respectively, and may act as killer defects. As a result, p–i–n diode devices on ammonothermal substrates frequently exhibited poor reverse and forward bias behavior due to the random extended defect distribution that cannot be intentionally avoided as in patterned dot-core substrates, as well as different impurity defects in the epitaxy. Therefore, we have found that ammonothermal GaN substrates require tighter control over both point and extended defect distributions in order to achieve reliable high power electronic devices.


  • Microscopic-scale defect analysis on β-Ga2O3 through microscopy

    by Min-Yeong Kim, Andrew J. Winchester, Alline F. Myers, Edwin J. Heilweil, Ory Maimon, W.-C. David Yang, Sang-Mo Koo, Qiliang Li, Sujitra Pookpanratana

    β-Ga2O3 is a wide bandgap semiconductor with potential for surpassing current-generation high-power device performance and cost-effectiveness, due to its unique properties and availability of large high-quality substrates. However, β-Ga2O3 power electronics are still relatively immature, and commercial realization of reliable high-power devices will require intimate knowledge of performance-limiting extended defects. While several defects have been characterized in bulk substrates, less attention has been given to defects in homoepitaxially grown β-Ga2O3, despite its importance in producing high quality active layers for power devices. In this work, we characterize the bulk electronic properties and extended structural defects in (010) β-Ga2O3 homoepitaxially grown via hydride vapor phase epitaxy (HVPE) using photoemission, transmission electron microscopy (TEM), and complementary spectroscopy and microscopy techniques. We observe two types of linear, surface defects aligned along the [001] crystal axis. One defect consists of a micrometer-sized particle and a tail of protruding material, while the other is a groove in the surface. The large particle is a Ga-rich phase that is likely present early in the HVPE growth that disrupts the surface, while the groove defect appears purely structural in nature. Defect etching and TEM analysis reveal that the linear defects are associated with different dislocation structures, which can explain the different local conductivity measured at each. Our results emphasize that proper surface processing of the bulk substrate is still necessary for obtaining higher quality epitaxial growth for large area power devices.


  • Open Access

    Photolysis of the peptide bond at 193 and 222 nm

    by Nicholas Drachman, Jacob Vietorisz, Andrew J. Winchester, Robert Vest, Gregory A. Cooksey, Sujitra Pookpanratana, Derek Stein

    Ultraviolet (UV) light is a well-established tool for fragmenting peptides in vacuum. This study investigates the fragmentation of peptides using 193 and 222 nm light in aqueous solution. Changes in the absorption spectra of solutions of the model dipeptide glycylglycine are monitored using a combination of real-time in situ transmission measurements and UV–Vis spectroscopy to report peptide bond scission following UV irradiation. Irradiation by a broadband ultraviolet light source flattens the absorbance peak centered near 193 nm, indicating cleavage of peptide bonds. Irradiation with low-intensity, monochromatic 193 and 222 nm light enabled measurements of the single-photon quantum yield of peptide bond scission, found to be (1.50 ± 0.12)% at 193 nm and (0.16 ± 0.03)% at 222 nm. These findings indicate that peptides may be fragmented in solution prior to emission into a mass spectrometer for new types of single-molecule analyses. The susceptibility of peptide bonds to ultraviolet radiation also suggests limited lifetimes for peptides on the early Earth’s surface, which are relevant to theories of the origins-of-life, and suggests a role for protein damage in explanations of the germicidal effect of 222 nm light exposure.


  • (Invited) Advanced Electronic Characterization of Wide Band Gap Semiconductor Defects at the Nanoscale

    by Andrew Winchester, Sujitra Pookpanratana

    Wide bandgap materials such as gallium nitride (GaN) and gallium oxide (Ga2O3) are currently under development for realizing next-generation high power electronic devices beyond silicon. Vertical structures produced through homoepitaxial growth are preferred for scaling high-voltage devices, which places strict demands on the quality of bulk substrates. In particular, extended defects can propagate during epitaxial growth into the active areas of devices. Therefore, there is a need for identifying defects and determining their electronic properties at relevant nano- to micro- scale dimensions in order to disentangle their combined effects on macroscopic devices. Here, we use a combination of laser-based photoemission electron microscopy (PEEM) and electrical atomic force microscopy (AFM) methodologies to investigate the local electronic properties of surface defects in epitaxially grown GaN and β-Ga2O3. PEEM is a non-scanning electron microscopy technique where photoelectrons emitted by a surface illuminated by deep-ultraviolet light are imaged with nanometer-scale spatial resolution. The emitted photoelectrons are sensitive to the local electronic structure, making PEEM a powerful tool for evaluating electronic changes at length scales relevant for devices, and provides valuable information for identifying “killer” defects which must be minimized during device growth and processing. The difficulty in producing large, low dislocation density bulk GaN substrates has led to longstanding issues with leakage current in diodes and transistor devices. We identify surface defects with different electronic properties in GaN epitaxy on different substrates using PEEM. We observe star-shaped defects on strain-patterned GaN substrates and elongated dark patches on growth ridges on ammonothermally grown GaN substrates. In both cases, the observed electronic changes in PEEM correlate directly with local electrical AFM measurements, revealing that local changes in the electronic structure at these defects results in altered electrical conduction. In contrast, the development of large bulk Ga2O3 substrates has been more successful, yet the identification and influence of various defects on device performance is still largely unknown at this point. The topography of β-Ga2O3 epitaxy varies widely between growth methods and substrate orientations. For example, β-Ga2O3 by hydride vapor physical epitaxy lacks fine structure, yet has surface defects that regularly appear in parallel orientations. In β-Ga2O3 grown on different substrate orientations, we observe variations in the surface electronic properties using PEEM. For certain substrate orientations and growths, we find nanoscale variations in doping, while other orientations display micron-scale electronic inhomogeneity and defects. Our results demonstrate that laser-based PEEM can be a powerful tool for detecting electrically active defects, as well as evaluating the nanoscale electronic homogeneity of wide bandgap semiconductors.

  • Watching (De)Intercalation of 2D Metals in Epitaxial Graphene: Insight into the Role of Defects

    by Falk Niefind, Qian Mao, Nadire Nayir, Malgorzata Kowalik, Jung‐Joon Ahn, Andrew J. Winchester, Chengye Dong, Rinu A. Maniyara, Joshua A. Robinson, Adri C. T. van Duin, et al.

    Intercalation forms heterostructures, and over 25 elements and compounds are intercalated into graphene, but the mechanism for this process is not well understood. Here, the de‐intercalation of 2D Ag and Ga metals sandwiched between bilayer graphene and SiC are followed using photoemission electron microscopy (PEEM) and atomistic‐scale reactive molecular dynamics simulations. By PEEM, de‐intercalation “windows” (or defects) are observed in both systems, but the processes follow distinctly different dynamics. Reversible de‐ and re‐intercalation of Ag is observed through a circular defect where the intercalation velocity front is 0.5 nm s−1 ± 0.2 nm s.−1 In contrast, the de‐intercalation of Ga is irreversible with faster kinetics that are influenced by the non‐circular shape of the defect. Molecular dynamics simulations support these pronounced differences and complexities between the two Ag and Ga systems. In the de‐intercalating Ga model, Ga atoms first pile up between graphene layers until ultimately moving to the graphene surface. The simulations, supported by density functional theory, indicate that the Ga atoms exhibit larger binding strength to graphene, which agrees with the faster and irreversible diffusion kinetics observed. Thus, both the thermophysical properties of the metal intercalant and its interaction with defective graphene play a key role in intercalation.


  • Electrical Properties of Ga2O3 Schottky Barrier Diodes with and without Mesa Structure

    by Minyeong Kim, Nolan Hendricks, Neil Moser, Pragya Shrestha, Sujitra Pookpanratana, Sang-Mo Koo, Qiliang Li

    Devices based on wide bandgap (WBG) semiconductors like silicon carbide (SiC), gallium nitride (GaN), and gallium oxide (Ga2O3) are ideal for high-power electronics in harsh environments. Among the WBG semiconductors, ultrawide bandgap (UWBG) β-phase gallium oxide (Ga2O3), EG ≈ 4.8 eV, is emerging as a replacement for the current commercially available wide bandgap (WBG) power electronics due to its generational improvements in performance and manufacturing cost [1]. Ga2O3 has a high theoretical breakdown electrical field of 8 MV/cm which in turn gives its Baliga’s figure of merit for power devices that is larger than other WBG materials. The availability of high-quality Ga2O3 substrates produced from melt-grown bulk single crystals also facilitates the development of vertical power devices. In the current stage, the vertical Schottky barrier diode (SBD) with Ga2O3 can have an improved current spreading effect when compared to power diode devices from Si, SiC, and GaN. Especially, the Ga2O3 is expected to surpass the trade-off relationship between breakdown voltage (BV) and on resistance (Ron,sp) that other materials have [2]. Nevertheless, the Ga2O3 vertical SBD still cannot achieve the theoretical breakdown electric field. One of the key topics for WBG semiconductors application is a structure for improved electrical management such as field rings, junction termination extension, and field plates to reduce the leakage current in the reverse bias state. Here, we investigate the characteristics of Ga2O3 SBDs with and without mesa structure in extreme environments at high and low temperature. Conventional and mesa Ga2O3 SBDs were fabricated on the halide vapor phase epitaxy (HVPE) grown β-Ga2O3 (001). A Sn-doped substrate with 61016 cm-3 was used for the HVPE growth. In the SBD with mesa structure, the circular mesa with a diameter of 162 μm and a depth of 500 nm was formed around anode electrodes. The Ti/Au metal stack on the back side of the substrate acted as a cathode and the anode electrode deposited Ni/Au/Pt layers. After the fabrication process, current-voltage (I-V) measurements were performed on the SBDs between -5 V and 1 V. From the results, the values of Ron,sp at 0.7 V are 46.4 Ω•cm2 and 46.2 Ω•cm2 in conventional and mesa SBDs, respectively. And additionally, the leakage current at -5 V is reduced by approximately 44.3% in the mesa structure. To obtain the Schottky barrier height (SBH) from I-V and capacitance-voltage (C-V) measurements, the C-V was observed in the range of -5 V to 0.5 V at 100 kHz. The SBH values from I-V and C-V measurements, the mesa SBDs have 1% - 5% larger SBH compared to the conventional structure, and it could be related to lower leakage current. Moreover, the depletion depths of conventional and mesa SBDs were 52.2 nm and 57.8 nm, respectively, from C-V measurements. For considering the electrical characteristics in extreme temperatures, the I-V measurements of both SBDs structure will be measured between 75 K to 525 K. From an initial low temperature measurement series, we determine a Richardson constant of 49 A/cm2 comparable to what has been reported by other groups. Furthermore, we will extend the study by performing deep-level transient spectroscopy (DLTS) to understand the defect information in Ga2O3. References [1] Pearton, S. J., Yang, J., Cary IV, P. H., Ren, F., Kim, J., Tadjer, M. J., & Mastro, M. A. (2018). A review of Ga2O3 materials, processing, and devices. Applied Physics Reviews, 5(1), 011301. [2] Higashiwaki, M., Sasaki, K., Murakami, H., Kumagai, Y., Koukitu, A., Kuramata, A., ... & Yamakoshi, S. (2016). Recent progress in Ga2O3 power devices. Semiconductor Science and Technology, 31(3), 034001.