Aura Tolosa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aura Tolosa has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Volker Presser
INM ‐ Leibniz Institute for New Materials Saarbrücken Germany
10 shared publications - Simon Fleischmann
Helmholtz Institute Ulm (HIU), Karlsruhe Institute of Technology (KIT), 89081 Ulm, Germany
7 shared publications - Antje Quade
Leibniz Institute for Plasma Science and Technology, Felix-Hausdorff-Straße 2, 17489 Greifswald, Germany
3 shared publications Anna Frank
2 shared publications- Benjamin Krüner
INM – Leibniz Institute for New Materials
2 shared publications - Eunho Lim
Department of Chemical & Biochemical Engineering, Dongguk University, Seoul, Republic of Korea
2 shared publications
Latest Publications
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (5) , 278
Sulfidation of Electrospun Vanadium Oxide Fiber Mats for Lithium-Ion Battery Electrodes
Energy storage plays a fundamental part in fulfilling the necessity of a more efficient, renewable, and environmentally friendly energy supply chain. Lithium-ion batteries are currently the most widely portable storage devices and typically employ transition metal oxides or dichalcogenides as electrode materials that promote redox reactions with lithium ions by either insertion or conversion mechanisms. For the latter, metal sulfides are prominent electrode materials owing to their high electrical conductivity and redox reversibility and high specific capacity. Vanadium sulfides exist in a range of crystal structures that can promote insertion of different ions in both anode and cathode side. Besides, they can also take part in conversion mechanisms in lithium-sulfur batteries. However, slow diffusion of lithium ions through the structure and high volumetric expansion compromises the average performance and stability of these materials. One strategy commonly adopted is the synthesis of hybrid nanostructured particles that combine a large surface area with short ion and electron transport pathways. The presence of conductive carbon in the hybrid material constrains the material expansion and ensures a conductive network during the conversion mechanism. Compared to other synthetic approaches, electrospinning enables the production of fibers constituted of nanosized structured materials. The continuous network of fibers forms free-standing mats that can be directly used as electrodes with no post-processing, coating or binder additives. Such mats allow continuous electron transport across the material while the synthesis itself promotes the homogeneous distribution of the components along the fibers, preventing particle agglomeration. In this work, vanadium oxide (VOx) mats are produced by electrospinning and converted to vanadium sulfide by thermal sulfidation process. The VOx fibers were prepared by the previously optimized electrospinning process.[1] The fiber mats were thermally treated under H2S/Ar atmosphere in different conditions to convert VOx into VSx. Lower synthesis temperatures promote a high degree of conversion while keeping smaller VSx domain size,and a higher interfacial contact between the carbon and the VSx phase. The VSx/C hybrid mats were directly applied as Li-ion battery electrodes and tested in different potential ranges to evaluate conversion and insertion mechanisms. The electrodes were paired with Li-ion discs in standard LP30 electrolyte using custom-built cell using spring-loaded titanium pistons.[2] The different VSx fibers were tested regarding redox profile, rate handling, and cycle stability. For the fibers with smaller VSx domain size, capacities up to 900 mAh/g were achieved when evaluating the whole active potential window, yet rate handling was compromised. When restricted to intercalation side capacities ranging of 150-280 mAh/g were observed, with good rate handling up to 2 A/g and full recovery of the initial capacity. References: [1] A. Tolosa, S. Fleischmann, I. Grobelsek, V. Presser, ACS Applied Energy Materials 2018, 1, 3790-3801. [2] D. Weingarth, M. Zeiger, N. Jäckel, M. Aslan, G. Feng, V. Presser, Advanced Energy Materials 2014, 4, 1400316.
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (5) , 278
Sulfidation of Electrospun Vanadium Oxide Fiber Mats for Lithium-Ion Battery Electrodes
Energy storage plays a fundamental part in fulfilling the necessity of a more efficient, renewable, and environmentally friendly energy supply chain. Lithium-ion batteries are currently the most widely portable storage devices and typically employ transition metal oxides or dichalcogenides as electrode materials that promote redox reactions with lithium ions by either insertion or conversion mechanisms. For the latter, metal sulfides are prominent electrode materials owing to their high electrical conductivity and redox reversibility and high specific capacity. Vanadium sulfides exist in a range of crystal structures that can promote insertion of different ions in both anode and cathode side. Besides, they can also take part in conversion mechanisms in lithium-sulfur batteries. However, slow diffusion of lithium ions through the structure and high volumetric expansion compromises the average performance and stability of these materials. One strategy commonly adopted is the synthesis of hybrid nanostructured particles that combine a large surface area with short ion and electron transport pathways. The presence of conductive carbon in the hybrid material constrains the material expansion and ensures a conductive network during the conversion mechanism. Compared to other synthetic approaches, electrospinning enables the production of fibers constituted of nanosized structured materials. The continuous network of fibers forms free-standing mats that can be directly used as electrodes with no post-processing, coating or binder additives. Such mats allow continuous electron transport across the material while the synthesis itself promotes the homogeneous distribution of the components along the fibers, preventing particle agglomeration. In this work, vanadium oxide (VOx) mats are produced by electrospinning and converted to vanadium sulfide by thermal sulfidation process. The VOx fibers were prepared by the previously optimized electrospinning process.[1] The fiber mats were thermally treated under H2S/Ar atmosphere in different conditions to convert VOx into VSx. Lower synthesis temperatures promote a high degree of conversion while keeping smaller VSx domain size,and a higher interfacial contact between the carbon and the VSx phase. The VSx/C hybrid mats were directly applied as Li-ion battery electrodes and tested in different potential ranges to evaluate conversion and insertion mechanisms. The electrodes were paired with Li-ion discs in standard LP30 electrolyte using custom-built cell using spring-loaded titanium pistons.[2] The different VSx fibers were tested regarding redox profile, rate handling, and cycle stability. For the fibers with smaller VSx domain size, capacities up to 900 mAh/g were achieved when evaluating the whole active potential window, yet rate handling was compromised. When restricted to intercalation side capacities ranging of 150-280 mAh/g were observed, with good rate handling up to 2 A/g and full recovery of the initial capacity. References: [1] A. Tolosa, S. Fleischmann, I. Grobelsek, V. Presser, ACS Applied Energy Materials 2018, 1, 3790-3801. [2] D. Weingarth, M. Zeiger, N. Jäckel, M. Aslan, G. Feng, V. Presser, Advanced Energy Materials 2014, 4, 1400316.
- 20 May 2019
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 3 (7) , 1776-1789
Nanosized titanium niobium oxide/carbon electrodes for lithium-ion energy storage applications
High demand for safer and more stable lithium-ion batteries brings up the challenge for finding better electrode materials. In this work, we study the functionalities of titanium niobium oxide (TNO)/carbon hybrid materials using carbon onions (OLC) and carbon nanohorns (NS), which are synthesized by well-controlled sol–gel chemistry, for anodes in lithium-ion batteries. We used two different molar ratios of titanium to niobium (1 : 2 and 1 : 5), and we compared the TNO–OLC and TNO–NS hybrid materials to conventional composite electrodes using physically admixed carbon. TNO–OLC-1:2 and TNO–OLC-1:5 nanohybrid materials displayed good electrochemical performance, with initial capacity values of 284 mA h g−1 and 290 mA h g−1, respectively, normalized to the metal oxide mass. Moreover, they maintained 68% (TNO–OLC-1:2) and 69% (TNO–OLC-1:5) of the initial capacity at 1 A g−1, outperforming the carbon nanohorn hybridized and composited electrode which maintained less than 50%. The long-term cycling stability of 800 cycles presents good capacity retention of 73% (TNO–OLC-1:2) and 76% (TNO–OLC-1:5), while the TNO–NS-1:2 hybrid material yields better capacity retention of 90% despite its low capacity. Our study demonstrates that the combination of TNO with appropriate carbon substrates enables good electrochemical performance but requires careful evaluation of the interplay of crystal structure, phase content, and particle morphology.
- 20 May 2019
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 3 (7) , 1776-1789
Nanosized titanium niobium oxide/carbon electrodes for lithium-ion energy storage applications
High demand for safer and more stable lithium-ion batteries brings up the challenge for finding better electrode materials. In this work, we study the functionalities of titanium niobium oxide (TNO)/carbon hybrid materials using carbon onions (OLC) and carbon nanohorns (NS), which are synthesized by well-controlled sol–gel chemistry, for anodes in lithium-ion batteries. We used two different molar ratios of titanium to niobium (1 : 2 and 1 : 5), and we compared the TNO–OLC and TNO–NS hybrid materials to conventional composite electrodes using physically admixed carbon. TNO–OLC-1:2 and TNO–OLC-1:5 nanohybrid materials displayed good electrochemical performance, with initial capacity values of 284 mA h g−1 and 290 mA h g−1, respectively, normalized to the metal oxide mass. Moreover, they maintained 68% (TNO–OLC-1:2) and 69% (TNO–OLC-1:5) of the initial capacity at 1 A g−1, outperforming the carbon nanohorn hybridized and composited electrode which maintained less than 50%. The long-term cycling stability of 800 cycles presents good capacity retention of 73% (TNO–OLC-1:2) and 76% (TNO–OLC-1:5), while the TNO–NS-1:2 hybrid material yields better capacity retention of 90% despite its low capacity. Our study demonstrates that the combination of TNO with appropriate carbon substrates enables good electrochemical performance but requires careful evaluation of the interplay of crystal structure, phase content, and particle morphology.
- Open Access
- 7 December 2018
- Published by Wiley in Batteries & Supercaps
- Vol. 2 (1) , 74-82
Vanadium (III) Oxide/Carbon Core/Shell Hybrids as an Anode for Lithium‐Ion Batteries
We present a facile two‐step synthesis of vanadium (III) oxide/carbon core/shell hybrid material for application as lithium‐ion battery electrode. The first step is a thermal treatment of a mixture of vanadium carbide (VC) and NiCl2 ⋅ 6H2O at 700 °C in an inert gas atmosphere. Elemental nickel obtained from decomposing NiCl2 ⋅ 6H2O served as a catalyst to trigger the local formation of graphitic carbon. In a second step, residual nickel was removed by washing the material in aqueous HCl. By replacing NiCl2 ⋅ 6H2O with anhydrous NiCl2, we obtained a hybrid material of vanadium carbide‐derived carbon and a vanadium carbide core. Material characterization revealed a needle‐like morphology of the rhombohedral V2O3 along with two carbon species with a different degree of graphitic ordering. We varied the NiCl2 ⋅ 6H2O‐to‐VC ratio, and the optimized material yielded a capacity of 110 mAh ⋅ g−1 at 2.5 A ⋅ g−1 which increased to 225 mAh ⋅ g−1 at 0.1 A ⋅ g−1 after 500 cycles in the potential range of 0.01‐3.00 V vs. Li/Li+. This enhanced performance is in stark contrast to the loss of lithium uptake capacity when using commercially available V2O3 mixed with carbon black, where 93 % of the initial capacity was lost after 50 cycles.
- 7 December 2018
- Published by Wiley in Batteries & Supercaps
- Vol. 2 (1) , 74-82
Open AccessVanadium (III) Oxide/Carbon Core/Shell Hybrids as an Anode for Lithium‐Ion Batteries
We present a facile two‐step synthesis of vanadium (III) oxide/carbon core/shell hybrid material for application as lithium‐ion battery electrode. The first step is a thermal treatment of a mixture of vanadium carbide (VC) and NiCl2 ⋅ 6H2O at 700 °C in an inert gas atmosphere. Elemental nickel obtained from decomposing NiCl2 ⋅ 6H2O served as a catalyst to trigger the local formation of graphitic carbon. In a second step, residual nickel was removed by washing the material in aqueous HCl. By replacing NiCl2 ⋅ 6H2O with anhydrous NiCl2, we obtained a hybrid material of vanadium carbide‐derived carbon and a vanadium carbide core. Material characterization revealed a needle‐like morphology of the rhombohedral V2O3 along with two carbon species with a different degree of graphitic ordering. We varied the NiCl2 ⋅ 6H2O‐to‐VC ratio, and the optimized material yielded a capacity of 110 mAh ⋅ g−1 at 2.5 A ⋅ g−1 which increased to 225 mAh ⋅ g−1 at 0.1 A ⋅ g−1 after 500 cycles in the potential range of 0.01‐3.00 V vs. Li/Li+. This enhanced performance is in stark contrast to the loss of lithium uptake capacity when using commercially available V2O3 mixed with carbon black, where 93 % of the initial capacity was lost after 50 cycles.
- Open Access
- 22 August 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (47)
Frontispiece: Design of Carbon/Metal Oxide Hybrids for Electrochemical Energy Storage
- 22 August 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (47)
Open AccessFrontispiece: Design of Carbon/Metal Oxide Hybrids for Electrochemical Energy Storage
- 17 July 2018
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 1 (8) , 3790-3801
Electrospun Hybrid Vanadium Oxide/Carbon Fiber Mats for Lithium- and Sodium-Ion Battery Electrodes
- 17 July 2018
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 1 (8) , 3790-3801
Electrospun Hybrid Vanadium Oxide/Carbon Fiber Mats for Lithium- and Sodium-Ion Battery Electrodes
- 8 June 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (47) , 12143-12153
Design of Carbon/Metal Oxide Hybrids for Electrochemical Energy Storage
Next generation electrochemical energy storage materials that enable a combination of high specific energy, specific power, and cycling stability can be obtained by a hybridization approach. This involves electrode materials that contain carbon and metal oxide phases linked on a nanoscopic level and combine characteristics of supercapacitors and batteries. The combination of the components requires careful design to create synergistic effects for an increased electrochemical performance. Improved understanding of the role of carbon as a substrate has advanced the power handling and cycling stability of hybrid materials significantly in recent years. This Concept outlines different design strategies for the design of hybrid electrode materials: (1) the deposition of metal oxides on readily existing carbon substrates and (2) co‐synthesizing both carbon and metal oxide phase during the synthesis procedure. The implications of carbon properties on the hybrid material's structure and performance will be assessed and the impact of the hybrid electrode architecture will be analyzed. The advantages and disadvantages of all approaches are highlighted and strategies to overcome the latter will be proposed.
- 8 June 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (47) , 12143-12153
Design of Carbon/Metal Oxide Hybrids for Electrochemical Energy Storage
Next generation electrochemical energy storage materials that enable a combination of high specific energy, specific power, and cycling stability can be obtained by a hybridization approach. This involves electrode materials that contain carbon and metal oxide phases linked on a nanoscopic level and combine characteristics of supercapacitors and batteries. The combination of the components requires careful design to create synergistic effects for an increased electrochemical performance. Improved understanding of the role of carbon as a substrate has advanced the power handling and cycling stability of hybrid materials significantly in recent years. This Concept outlines different design strategies for the design of hybrid electrode materials: (1) the deposition of metal oxides on readily existing carbon substrates and (2) co‐synthesizing both carbon and metal oxide phase during the synthesis procedure. The implications of carbon properties on the hybrid material's structure and performance will be assessed and the impact of the hybrid electrode architecture will be analyzed. The advantages and disadvantages of all approaches are highlighted and strategies to overcome the latter will be proposed.
- 20 December 2017
- Published by Wiley in ChemSusChem
- Vol. 11 (1) , 159-170
Binder‐Free Hybrid Titanium–Niobium Oxide/Carbon Nanofiber Mats for Lithium‐Ion Battery Electrodes
Free‐standing, binder‐free, titanium–niobium oxide/carbon hybrid nanofibers are prepared for Li‐ion battery applications. A one‐pot synthesis offers a significant reduction of processing steps and avoids the use of environmentally unfriendly binder materials, making the approach highly sustainable. Tetragonal Nb2O5/C and monoclinic Ti2Nb10O29/C hybrid nanofibers synthesized at 1000 °C displayed the highest electrochemical performance, with capacity values of 243 and 267 mAh g−1, respectively, normalized to the electrode mass. At 5 A g−1, the Nb2O5/C and Ti2Nb10O29/C hybrid fibers maintained 78 % and 53 % of the initial capacity, respectively. The higher rate performance and stability of tetragonal Nb2O5 compared to that of monoclinic Ti2Nb10O29 is related to the low energy barriers for Li+ transport in its crystal structure, with no phase transformation. The improved rate performance resulted from the excellent charge propagation in the continuous nanofiber network.
- 20 December 2017
- Published by Wiley in ChemSusChem
- Vol. 11 (1) , 159-170
Binder‐Free Hybrid Titanium–Niobium Oxide/Carbon Nanofiber Mats for Lithium‐Ion Battery Electrodes
Free‐standing, binder‐free, titanium–niobium oxide/carbon hybrid nanofibers are prepared for Li‐ion battery applications. A one‐pot synthesis offers a significant reduction of processing steps and avoids the use of environmentally unfriendly binder materials, making the approach highly sustainable. Tetragonal Nb2O5/C and monoclinic Ti2Nb10O29/C hybrid nanofibers synthesized at 1000 °C displayed the highest electrochemical performance, with capacity values of 243 and 267 mAh g−1, respectively, normalized to the electrode mass. At 5 A g−1, the Nb2O5/C and Ti2Nb10O29/C hybrid fibers maintained 78 % and 53 % of the initial capacity, respectively. The higher rate performance and stability of tetragonal Nb2O5 compared to that of monoclinic Ti2Nb10O29 is related to the low energy barriers for Li+ transport in its crystal structure, with no phase transformation. The improved rate performance resulted from the excellent charge propagation in the continuous nanofiber network.
- 31 October 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (1) , 133-146
Carbon onion/sulfur hybrid cathodes via inverse vulcanization for lithium–sulfur batteries
A sulfur–1,3-diisopropenylbenzene copolymer was synthesized by ring-opening radical polymerization and hybridized with carbon onions at different loading levels. The carbon onion mixing was assisted by shear in a two-roll mill to capitalize on the softened state of the copolymer. The sulfur copolymer and the hybrids were thoroughly characterized in structure and chemical composition, and finally tested by electrochemical benchmarking. An enhancement of specific capacity was observed over 140 cycles at higher content of carbon onions in the hybrid electrodes. The copolymer hybrids demonstrate a maximum initial specific capacity of 1150 mA h gsulfur −1 (850 mA h gelectrode −1) and a low decay of capacity to reach 790 mA h gsulfur −1 (585 mA h gelectrode −1) after 140 charge/discharge cycles. All carbon onion/sulfur copolymer hybrid electrodes yielded high chemical stability, stable electrochemical performance superior to conventional melt-infiltrated reference samples having similar sulfur and carbon onion content. The amount of carbon onions embedded in the sulfur copolymer has a strong influence on the specific capacity, as they effectively stabilize the sulfur copolymer and sterically hinder the recombination of sulfur species to the S8 configuration.
- 31 October 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (1) , 133-146
Carbon onion/sulfur hybrid cathodes via inverse vulcanization for lithium–sulfur batteries
A sulfur–1,3-diisopropenylbenzene copolymer was synthesized by ring-opening radical polymerization and hybridized with carbon onions at different loading levels. The carbon onion mixing was assisted by shear in a two-roll mill to capitalize on the softened state of the copolymer. The sulfur copolymer and the hybrids were thoroughly characterized in structure and chemical composition, and finally tested by electrochemical benchmarking. An enhancement of specific capacity was observed over 140 cycles at higher content of carbon onions in the hybrid electrodes. The copolymer hybrids demonstrate a maximum initial specific capacity of 1150 mA h gsulfur −1 (850 mA h gelectrode −1) and a low decay of capacity to reach 790 mA h gsulfur −1 (585 mA h gelectrode −1) after 140 charge/discharge cycles. All carbon onion/sulfur copolymer hybrid electrodes yielded high chemical stability, stable electrochemical performance superior to conventional melt-infiltrated reference samples having similar sulfur and carbon onion content. The amount of carbon onions embedded in the sulfur copolymer has a strong influence on the specific capacity, as they effectively stabilize the sulfur copolymer and sterically hinder the recombination of sulfur species to the S8 configuration.
- 23 October 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (1) , 215-228
Continuous silicon oxycarbide fiber mats with tin nanoparticles as a high capacity anode for lithium-ion batteries
Continuous fiber mats are attractive electrodes for lithium-ion batteries, because they allow operation at high charge/discharge rates in addition to being free of polymer binders and conductive additives. In this work, we synthesize and characterize continuous Sn/SiOC fibers (diameter ca. 0.95 μm), as a Li-ion battery anode. Our synthesis employs electrospinning of a low-cost silicone resin, using tin acetate in a dual role both as a polymer crosslinker and as a tin precursor (6–22 mass%). The hybrid electrodes present very high initial reversible capacities (840–994 mA h g−1) at 35 mA g−1, and retain 280–310 mA h g−1 at 350 mA g−1. After 100 cycles at 70 mA g−1, the hybrid fibers maintained 400–509 mA h g−1. Adding low amounts of Sn is beneficial not just for the crosslinking of the polymer precursor, but also to decrease the presence of electrochemically inactive silicon carbide domains within the SiOC fibers. Also, the metallic tin clusters contribute to a higher Li+ insertion in the first cycles. However, high amounts of Sn decrease the electrochemical performance stability. In SiOC fibers synthesized at high temperatures (1200 °C), the Cfree phase has a significant influence on the stability of the system, by compensating for the volume expansion from the alloying systems (Sn and SiO2), and improving the conductivity of the hybrid system. Therefore, a high amount of carbon and a high graphitization degree are crucial for a high conductivity and a stable electrochemical performance.
- 23 October 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (1) , 215-228
Continuous silicon oxycarbide fiber mats with tin nanoparticles as a high capacity anode for lithium-ion batteries
Continuous fiber mats are attractive electrodes for lithium-ion batteries, because they allow operation at high charge/discharge rates in addition to being free of polymer binders and conductive additives. In this work, we synthesize and characterize continuous Sn/SiOC fibers (diameter ca. 0.95 μm), as a Li-ion battery anode. Our synthesis employs electrospinning of a low-cost silicone resin, using tin acetate in a dual role both as a polymer crosslinker and as a tin precursor (6–22 mass%). The hybrid electrodes present very high initial reversible capacities (840–994 mA h g−1) at 35 mA g−1, and retain 280–310 mA h g−1 at 350 mA g−1. After 100 cycles at 70 mA g−1, the hybrid fibers maintained 400–509 mA h g−1. Adding low amounts of Sn is beneficial not just for the crosslinking of the polymer precursor, but also to decrease the presence of electrochemically inactive silicon carbide domains within the SiOC fibers. Also, the metallic tin clusters contribute to a higher Li+ insertion in the first cycles. However, high amounts of Sn decrease the electrochemical performance stability. In SiOC fibers synthesized at high temperatures (1200 °C), the Cfree phase has a significant influence on the stability of the system, by compensating for the volume expansion from the alloying systems (Sn and SiO2), and improving the conductivity of the hybrid system. Therefore, a high amount of carbon and a high graphitization degree are crucial for a high conductivity and a stable electrochemical performance.