SLSudarat Lee

Sudarat Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sudarat Lee has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characterization Methods of TMD Transistor Gate Dielectrics Targeting 1 nm EOT for 2-D CMOS Scaling

    by Chelsey Dorow, Aniruddha Konar, Ande Kitamura, Ashish Penumatcha, Sudarat Lee, Adedapo Oni, Chi-Yin Cheng, Nazmul Arefin, Kevin O'BRien, Scott B. Clendenning, et al.

    2-D materials show promise to possibly replace Si channel material to continue Moore’s Law scaling of transistors down to 5 nm gate lengths. The scaling opportunities of 2-D materials arise due to their ultra-thin monolayer thickness of sub-1 nm, which allows for strong electrostatic gate control while maintaining high mobility with virtually no surface roughness scattering from the intrinsically passivated van der Waals (vdW) surfaces. The scaling benefits of 2-D materials, however, can only be realized with the development of a highly scaled, low-defect gate oxide growth method compatible with vdW surfaces. This has thus far proven to be challenging as the vdW surfaces lack the dangling bonds required for standard ALD oxide growth nucleation. Furthermore, gate oxide films grown on vdW surfaces are rarely characterized following industry standard capacitance–voltage (CV) methods, primarily due to high leakage or resistance often present in today’s 2-D transistors, rendering CV measurements very difficult. While 2-D MOSFET gate leakage and contact resistances are improving rapidly, researchers still resort to inferring equivalent oxide thickness (EOT) from I–V characterization rather than standard CV. In this work, we show through both technology computer aided design (TCAD) simulations and experiments that I–V based methods of 2-D MOSFET EOT measurements have several pitfalls which may lead to inaccurate conclusions. We provide techniques to improve accuracy for both I–V and CV-based gate oxide characterization, which will help accelerate the field of 2-D transistor development closer toward a feasible CMOS technology.

  • Advancing Monolayer 2-D nMOS and pMOS Transistor Integration From Growth to Van Der Waals Interface Engineering for Ultimate CMOS Scaling

    by Chelsey Dorow, Kevin O'BRien, Carl H. Naylor, Sudarat Lee, Ashish Penumatcha, Andy Hsiao, Tristan Tronic, Michael Christenson, Kirby Maxey, Hui Zhu, et al.

    2-D-material channels enable ultimate scaling of MOSFET transistors and will help Moore's Law scaling for years. We demonstrate the state of both n- and p-MOSFETs using monolayer transition metal dichalcogenide (TMD) channels of sub-1 nm thickness and manufacturable CVD, molecular beam epitaxy (MBE), or seeded growth. nMOS devices on transferred MBE MoS₂ using novel contact metal show low variation, one of the lowest reported contact resistances ( $R_{c}$ ) of 0.4 kΩ ·μ m, low hysteresis, and good subthreshold swing (SS) of 77 mV/dec. pMOS devices using CVD WSe₂ show 89 mV/dec SS, best reported for pMOS on grown films, but on-current remains behind nMOS. We show $R_{C}$ is improved by 5x by using a bake process prior to contact metal deposition. Transfer-free, area-selective seeded growth techniques for WS₂ and MoS₂ are demonstrated as options for wafer-scale TMD channel growth. WS₂ transistors achieve 10 μA/μm on-current, highest reported on WS₂ using seeded growth. A new capacitance method is shown to monitor 2-D material contact interface quality. Gate-oxide interface engineering through metal seeding and atomic layer deposition (ALD) demonstrates that a single 2-D channel material can selectively make pMOS or nMOS transistors, alike Si CMOS, and can also be used as a method to achieve p-type doping. We compare back-gated bare channel devices with dual-gate devices and observe hysteresis-free operation and an improvement in mobility with proper passivation.


  • Geometric Optimization of Bismuth Vanadate Core–Shell Nanowire Photoanodes using Atomic Layer Deposition

    by Ashley R. Bielinski, Andrew J. Gayle, Sudarat Lee, Neil P. Dasgupta

    In this study, systematic geometric tuning of core–shell nanowire (NW) architectures is used to decouple the contributions from light absorption, charge separation, and charge transfer kinetics in photoelectrochemical water oxidation. Core–shell–shell NW arrays were fabricated using a combination of hydrothermal synthesis of ZnO and atomic layer deposition (ALD) of SnO2 and BiVO4. The length and spacing of the NW scaffold, as well as the BiVO4 film thickness, were systematically tuned to optimize the photoelectrochemical performance. A photocurrent of 4.4 mA/cm2 was measured at 1.23 V vs RHE for sulfite oxidation and 4.0 mA/cm2 at 1.80 V vs RHE for water oxidation without a cocatalyst, which are the highest values reported to date for an ALD-deposited photoanode. Electromagnetic simulations demonstrate that spatial heterogeneity in light absorption along the core–shell NW length has a critical role in determining internal quantum efficiency. The mechanistic understandings in this study highlight the benefits of systematically optimizing electrode geometry at the nanoscale when designing photoelectrodes.


  • Atomic Layer Deposition of Bismuth Vanadate Core–Shell Nanowire Photoanodes

    by Ashley R. Bielinski, Sudarat Lee, James J. Brancho, Samuel L. Esarey, Andrew J. Gayle, Eric Kazyak, Kai Sun, Bart M. Bartlett, Neil P. Dasgupta


  • Open Access

    Selective C–O Bond Cleavage of Lignin Systems and Polymers Enabled by Sequential Palladium-Catalyzed Aerobic Oxidation and Visible-Light Photoredox Catalysis

    by Gabriel Magallanes, Markus D. Kärkäs, Irene Bosque, Sudarat Lee, Stephen Maldonado, Corey R. J. Stephenson

    Lignin, which is a highly cross-linked and irregular biopolymer, is nature’s most abundant source of aromatic compounds and constitutes an attractive renewable resource for the production of aromatic commodity chemicals. Herein, we demonstrate a practical and operationally simple two-step degradation approach involving Pd-catalyzed aerobic oxidation and visible-light photoredox-catalyzed reductive fragmentation for the chemoselective cleavage of the β-O-4 linkage—the predominant linkage in lignin—for the generation of lower-molecular-weight aromatic building blocks. The developed strategy affords the β-O-4 bond cleaved products with high chemoselectivity and in high yields, is amenable to continuous flow processing, operates at ambient temperature and pressure, and is moisture- and oxygen-tolerant.


  • Direct electrochemical deposition of crystalline silicon nanowires at T ≥ 60 °C

    by Luyao Ma, Sudarat Lee, Joshua DeMuth, Stephen Maldonado

    Direct synthesis of crystalline silicon (Si) nanowires at low temperatures has been achieved through an electrochemical liquid–liquid–solid (ec-LLS) process. Liquid metal nanodroplets containing Ga were used as both discrete ultramicroelectrodes and crystal growth seeds for Si nanowires. This new ec-LLS process was performed in propylene carbonate containing SiCl4 at temperatures as low as 60 °C. X-ray diffraction and Raman spectra separately and independently indicated the nanowires were crystalline as prepared. Scanning electron micrographs of Si nanowires grown on both Si(111) and Si(100) substrates further showed that the direction of nanowire growth specifically followed the crystallographic orientation of the underlying substrate, indicating deposition with homoepitaxy. Localized electron diffraction patterns collected from individual Si nanowires in a transmission electron microscope showed the characteristic pattern of the diamond cubic structure of crystalline Si. Additional experiments were performed that indicated the wetting of the electrodeposited Si by the liquid metal influenced the morphology of the resultant nanowire. These cumulative results support the overarching premise that ec-LLS is a unique synthetic method for crystalline Si nanowires at low temperatures.


  • Macroporous p-GaP Photocathodes Prepared by Anodic Etching and Atomic Layer Deposition Doping

    by Sudarat Lee, Ashley R. Bielinski, Eli Fahrenkrug, Neil P. Dasgupta, Stephen Maldonado

    P-type macroporous gallium phosphide (GaP) photoelectrodes have been prepared by anodic etching of an undoped, intrinsically n-type GaP(100) wafer and followed by drive-in doping with Zn from conformal ZnO films prepared by atomic layer deposition (ALD). Specifically, 30 nm ALD ZnO films were coated on GaP macroporous films and then annealed at T = 650 ºC for various times to diffuse in Zn. Under 100 mW cm-2 white light illumination, the resulting Zn-doped macroporous GaP consistently exhibit strong cathodic photocurrent when measured in aqueous electrolyte containing methyl viologen. Wavelength-dependent photoresponse measurements of the Zn-doped macroporous GaP revealed enhanced collection efficiency at wavelengths longer than 460 nm, indicating the ALD doping step rendered the entire material p-type and imparted the ability to sustain a strong internal electric field that preferentially drove photogenerated electrons to the GaP/electrolyte interface. Collectively, this work presents a straightforward doping strategy with potentially high degree of controllability for high-aspect ratio III-V materials, where the ZnO ALD film is a practical dopant source for Zn.


  • Synthesis of photoactive ZnSnP2 semiconductor nanowires

    by Sudarat Lee, Eli Fahrenkrug, Stephen Maldonado


  • Open Access

    Use of graphene as protection film in biological environments

    by Weixia Zhang, Sudarat Lee, Kelly L. McNear, Ting Fung Chung, Seunghyun Lee, Kyunghoon Lee, Scott A. Crist, Timothy L. Ratliff, Zhaohui Zhong, Yong P. Chen, et al.

    Corrosion of metal in biomedical devices could cause serious health problems to patients. Currently ceramics coating materials used in metal implants can reduce corrosion to some extent with limitations. Here we proposed graphene as a biocompatible protective film for metal potentially for biomedical application. We confirmed graphene effectively inhibits Cu surface from corrosion in different biological aqueous environments. Results from cell viability tests suggested that graphene greatly eliminates the toxicity of Cu by inhibiting corrosion and reducing the concentration of Cu2+ ions produced. We demonstrated that additional thiol derivatives assembled on graphene coated Cu surface can prominently enhance durability of sole graphene protection limited by the defects in graphene film. We also demonstrated that graphene coating reduced the immune response to metal in a clinical setting for the first time through the lymphocyte transformation test. Finally, an animal experiment showed the effective protection of graphene to Cu under in vivo condition. Our results open up the potential for using graphene coating to protect metal surface in biomedical application.