Seung-Hyub Baek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Seung-Hyub Baek has a total of 463 co-authors. Here are the top co-authors by number of shared publications:
- Seong Keun Kim
Korea Institute of Science and Technology
42 shared publications Jin-Sang Kim
Electronic Materials Research Center, Korea Institute of Science and Technology 1 , Seoul 02792, South Korea
34 shared publications- Ho Won Jang
Seoul National University
22 shared publications - Jin-Sang Kim
Korea Inst Sci & Technol, Ctr Elect Mat, Seoul 02792, South Korea
22 shared publications - Chong-Yun Kang
Electronic and Hybrid Materials Research Center Korea Institute of Science and Technology (KIST) Seoul Republic of Korea
16 shared publications Chang-Beom Eom
Department of Materials Science and Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA
14 shared publications
Latest Publications
- Open Access
- 7 November 2026
- Published by Elsevier in Materials Today
- Vol. 101
BEOL-compatible monolithic integration of property-tunable complex oxide single crystals on Si for advancing the more-than-Moore paradigm
- 7 November 2026
- Published by Elsevier in Materials Today
- Vol. 101
Open AccessBEOL-compatible monolithic integration of property-tunable complex oxide single crystals on Si for advancing the more-than-Moore paradigm
- Open Access
- 16 April 2026
- Published by Wiley in Advanced Science
- p. e24377
Engineering of Crystal and Domain Structures in Epitaxial Y:HfO 2 Thin Films by YSZ Substrate Miscut
The crystal and domain structures of epitaxial polymorphic oxide thin films are governed not only by intrinsic bulk energies but also by extrinsic factors arising from interactions with the underlying oxide substrates. Here, we investigate the effects of substrate miscut on the phase stability of epitaxial HfO 2 films on yttria‐stabilized zirconia (Y:ZrO 2 , YSZ), employing a combined experimental and computational approach to map the thickness‐temperature phase diagram. High‐quality epitaxial 6% Y‐doped HfO 2 films with atomically smooth surfaces were fabricated by magnetron sputtering on both nominally‐flat and 8°‐miscut (001) YSZ single‐crystal substrates. On nominally‐flat substrates, (100)‐oriented orthorhombic films form a two‐variant domain structure and evolve into (001)‐oriented monoclinic phases at larger thicknesses. On 8°‐miscut substrates, in contrast, a (100)‐oriented orthorhombic phase with a preferential population among the two variants is stabilized at small thicknesses, whereas a reoriented, (100)‐oriented monoclinic phase is favored at larger thicknesses, accompanied by a pronounced narrowing of the orthorhombic stability window. This work provides fundamental insight into the control of phase stability and domain architecture in polymorphic oxides, relevant to the integration of complex oxides in advanced electronic platforms.
- 16 April 2026
- Published by Wiley in Advanced Science
- p. e24377
Open AccessEngineering of Crystal and Domain Structures in Epitaxial Y:HfO 2 Thin Films by YSZ Substrate Miscut
The crystal and domain structures of epitaxial polymorphic oxide thin films are governed not only by intrinsic bulk energies but also by extrinsic factors arising from interactions with the underlying oxide substrates. Here, we investigate the effects of substrate miscut on the phase stability of epitaxial HfO 2 films on yttria‐stabilized zirconia (Y:ZrO 2 , YSZ), employing a combined experimental and computational approach to map the thickness‐temperature phase diagram. High‐quality epitaxial 6% Y‐doped HfO 2 films with atomically smooth surfaces were fabricated by magnetron sputtering on both nominally‐flat and 8°‐miscut (001) YSZ single‐crystal substrates. On nominally‐flat substrates, (100)‐oriented orthorhombic films form a two‐variant domain structure and evolve into (001)‐oriented monoclinic phases at larger thicknesses. On 8°‐miscut substrates, in contrast, a (100)‐oriented orthorhombic phase with a preferential population among the two variants is stabilized at small thicknesses, whereas a reoriented, (100)‐oriented monoclinic phase is favored at larger thicknesses, accompanied by a pronounced narrowing of the orthorhombic stability window. This work provides fundamental insight into the control of phase stability and domain architecture in polymorphic oxides, relevant to the integration of complex oxides in advanced electronic platforms.
- Open Access
- 1 December 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (12) , 1919-1930
Extreme sputtering: Epitaxy of multifunctional oxides heterostructures
This review paper provides an in-depth exploration of low-damage sputtering techniques and their significance in synthesizing high-quality epitaxial multifunctional oxide heterostructures. The review will examine factors contributing to damages during sputtering and introduce strategies for minimizing these detrimental effects. Prominent examples are provided to illustrate key milestones in the development of the sputtering technique, addressing critical issues such as maintaining stoichiometry when volatile species are included, achieving precise atomic-level control of interfaces, integrating an additional anion into oxides, selecting a particular phase from many possible polymorphs, and controlling microstructure of thin films. Additionally, various defect mitigation strategies are discussed, including the use of miscut substrates, in-situ monitoring systems, and chemical buffer layers. By shedding light on the advancements and limitations in sputtering, this review not only enhances our present understanding of thin film deposition, but also paves the way for future innovative sputtering techniques, holding tremendous potential for the exploration of new materials and their applications in various industries.
- 1 December 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (12) , 1919-1930
Open AccessExtreme sputtering: Epitaxy of multifunctional oxides heterostructures
This review paper provides an in-depth exploration of low-damage sputtering techniques and their significance in synthesizing high-quality epitaxial multifunctional oxide heterostructures. The review will examine factors contributing to damages during sputtering and introduce strategies for minimizing these detrimental effects. Prominent examples are provided to illustrate key milestones in the development of the sputtering technique, addressing critical issues such as maintaining stoichiometry when volatile species are included, achieving precise atomic-level control of interfaces, integrating an additional anion into oxides, selecting a particular phase from many possible polymorphs, and controlling microstructure of thin films. Additionally, various defect mitigation strategies are discussed, including the use of miscut substrates, in-situ monitoring systems, and chemical buffer layers. By shedding light on the advancements and limitations in sputtering, this review not only enhances our present understanding of thin film deposition, but also paves the way for future innovative sputtering techniques, holding tremendous potential for the exploration of new materials and their applications in various industries.
- 25 July 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (3)
Why is it challenging to improve the thermoelectric properties of n-type Bi2Te3 alloys?
The successful application of nanotechnologies in enhancing thermoelectric properties of n-type Bi2Te3 alloys remains a formidable challenge, despite significant advancements in their p-type counterparts. The distinctive challenges inherent to n-type materials include the complex relationships between defect structures and electron concentration, and the strong anisotropy of thermoelectric properties. Electrons originate from various defect structures, such as impurity dopants, vacancies, antisite defects, and grain/domain boundaries, which sensitively varies depending on material synthesis processes. Moreover, the pronounced anisotropic nature of thermoelectric properties requires grain alignment along specific crystallographic directions. Therefore, the challenges in achieving high-performance n-type Bi2Te3 alloys lie in the difficulties of independently controlling defect structures (electron concentration), textured microstructures (electron/phonon transport property), and nanofeatures. This review aims to provide a comprehensive understanding of the difficulties and challenges associated with these aspects, and to discuss potential routes for realizing high-performance n-type Bi2Te3 alloys.
- 25 July 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (3)
Why is it challenging to improve the thermoelectric properties of n-type Bi2Te3 alloys?
The successful application of nanotechnologies in enhancing thermoelectric properties of n-type Bi2Te3 alloys remains a formidable challenge, despite significant advancements in their p-type counterparts. The distinctive challenges inherent to n-type materials include the complex relationships between defect structures and electron concentration, and the strong anisotropy of thermoelectric properties. Electrons originate from various defect structures, such as impurity dopants, vacancies, antisite defects, and grain/domain boundaries, which sensitively varies depending on material synthesis processes. Moreover, the pronounced anisotropic nature of thermoelectric properties requires grain alignment along specific crystallographic directions. Therefore, the challenges in achieving high-performance n-type Bi2Te3 alloys lie in the difficulties of independently controlling defect structures (electron concentration), textured microstructures (electron/phonon transport property), and nanofeatures. This review aims to provide a comprehensive understanding of the difficulties and challenges associated with these aspects, and to discuss potential routes for realizing high-performance n-type Bi2Te3 alloys.
- Open Access
- 2 October 2023
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 9 (1) , 1-11
Dual-frequency piezoelectric micromachined ultrasound transducer based on polarization switching in ferroelectric thin films
Due to its additional frequency response, dual-frequency ultrasound has advantages over conventional ultrasound, which operates at a specific frequency band. Moreover, a tunable frequency from a single transducer enables sonographers to achieve ultrasound images with a large detection area and high resolution. This facilitates the availability of more advanced techniques that simultaneously require low- and high-frequency ultrasounds, such as harmonic imaging and image-guided therapy. In this study, we present a novel method for dual-frequency ultrasound generation from a ferroelectric piezoelectric micromachined ultrasound transducer (PMUT). Uniformly designed transducer arrays can be used for both deep low-resolution imaging and shallow high-resolution imaging. To switch the ultrasound frequency, the only requirement is to tune a DC bias to control the polarization state of the ferroelectric film. Flextensional vibration of the PMUT membrane strongly depends on the polarization state, producing low- and high-frequency ultrasounds from a single excitation frequency. This strategy for dual-frequency ultrasounds meets the requirement for either multielectrode configurations or heterodesigned elements, which are integrated into an array. Consequently, this technique significantly reduces the design complexity of transducer arrays and their associated driving circuits.
- 2 October 2023
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 9 (1) , 1-11
Open AccessDual-frequency piezoelectric micromachined ultrasound transducer based on polarization switching in ferroelectric thin films
Due to its additional frequency response, dual-frequency ultrasound has advantages over conventional ultrasound, which operates at a specific frequency band. Moreover, a tunable frequency from a single transducer enables sonographers to achieve ultrasound images with a large detection area and high resolution. This facilitates the availability of more advanced techniques that simultaneously require low- and high-frequency ultrasounds, such as harmonic imaging and image-guided therapy. In this study, we present a novel method for dual-frequency ultrasound generation from a ferroelectric piezoelectric micromachined ultrasound transducer (PMUT). Uniformly designed transducer arrays can be used for both deep low-resolution imaging and shallow high-resolution imaging. To switch the ultrasound frequency, the only requirement is to tune a DC bias to control the polarization state of the ferroelectric film. Flextensional vibration of the PMUT membrane strongly depends on the polarization state, producing low- and high-frequency ultrasounds from a single excitation frequency. This strategy for dual-frequency ultrasounds meets the requirement for either multielectrode configurations or heterodesigned elements, which are integrated into an array. Consequently, this technique significantly reduces the design complexity of transducer arrays and their associated driving circuits.
- 25 July 2023
- Published by Springer Nature in Electronic Materials Letters
- Vol. 20 (4) , 484-490
Evolution of Microcracks in Epitaxial CeO2 Thin Films on YSZ-Buffered Si
- 25 July 2023
- Published by Springer Nature in Electronic Materials Letters
- Vol. 20 (4) , 484-490
Evolution of Microcracks in Epitaxial CeO2 Thin Films on YSZ-Buffered Si
- 21 June 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18195-18206
Atomically mixed catalysts on a 3D thin-shell TiO 2 for dual-modal chemical detection and neutralization
Environmental pollutants threaten millions of lives and state-of-the-art strategies, mostly based on surface catalytic activities to remediate environmental issues, have emerged. Despite their active capabilities, traditional schemes are only capable of a single function, either sensing hazardous chemicals or their reduction, limiting the identification of clear solutions to environmental problems. This study proposes a material engineering method that adopts both the detection and neutralization of environmental pollutants for remediation. This strategy exploits ultrafast flash lamp-driven thermal engineering to realize ultra-small (2 triggers an intensive photothermal effect, enabling instant reduction of various surface-decorated metal ion precursors into an atomically mixed heterostructure. Experimental and computational studies were conducted to investigate the physicochemical reactions occurring on the heterometal catalysts. As a proof-of-concept, the universal photocatalytic utility of dual-mode photoactivated quaternary phase (PtPdNiCo) NPs incorporated into 3D TiO2 was demonstrated for gaseous chemical sensing and degradation of environmental pollutants in water.
- 21 June 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18195-18206
Atomically mixed catalysts on a 3D thin-shell TiO 2 for dual-modal chemical detection and neutralization
Environmental pollutants threaten millions of lives and state-of-the-art strategies, mostly based on surface catalytic activities to remediate environmental issues, have emerged. Despite their active capabilities, traditional schemes are only capable of a single function, either sensing hazardous chemicals or their reduction, limiting the identification of clear solutions to environmental problems. This study proposes a material engineering method that adopts both the detection and neutralization of environmental pollutants for remediation. This strategy exploits ultrafast flash lamp-driven thermal engineering to realize ultra-small (2 triggers an intensive photothermal effect, enabling instant reduction of various surface-decorated metal ion precursors into an atomically mixed heterostructure. Experimental and computational studies were conducted to investigate the physicochemical reactions occurring on the heterometal catalysts. As a proof-of-concept, the universal photocatalytic utility of dual-mode photoactivated quaternary phase (PtPdNiCo) NPs incorporated into 3D TiO2 was demonstrated for gaseous chemical sensing and degradation of environmental pollutants in water.
- Open Access
- 5 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (23)
Memory window enhancement in n-type ferroelectric field-effect transistors by engineering ozone exposure in atomic layer deposition of HfZrOx films
We demonstrate n-type ferroelectric field-effect transistors (FeFETs) employing atomic-layer-deposited HfZrOx (HZO) films with a large memory window (MW) immediately after the write operation. Charge trapping at the HZO/Si interface in FeFETs is the primary source of memory window reduction. To control the properties of the interfacial layer, we varied the O3 injection time during atomic layer deposition. The HZO (long O3 of 7 s)-based FeFET demonstrated a large MW (2.1 V) in the DC transfer curves compared with the HZO (short O3 of 0.3 s)-based FeFET (0.9 V), although the bulk properties of the HZO films barely changed with the O3 injection time. In pulsed I–V measurements with an extremely short delay time of 100 ns between pulses, the HZO (long O3 of 7 s)-based FeFET showed a large MW of 1.0 V. Such improvements in the performance of HZO-based FeFETs indicate that the trap density in the interfacial layer is reduced by the use of a long O3 injection time. This is supported by the variation in the silicate/SiO2 ratio within the interfacial layer of the HZO films deposited at various O3 injection times.
- 5 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (23)
Open AccessMemory window enhancement in n-type ferroelectric field-effect transistors by engineering ozone exposure in atomic layer deposition of HfZrOx films
We demonstrate n-type ferroelectric field-effect transistors (FeFETs) employing atomic-layer-deposited HfZrOx (HZO) films with a large memory window (MW) immediately after the write operation. Charge trapping at the HZO/Si interface in FeFETs is the primary source of memory window reduction. To control the properties of the interfacial layer, we varied the O3 injection time during atomic layer deposition. The HZO (long O3 of 7 s)-based FeFET demonstrated a large MW (2.1 V) in the DC transfer curves compared with the HZO (short O3 of 0.3 s)-based FeFET (0.9 V), although the bulk properties of the HZO films barely changed with the O3 injection time. In pulsed I–V measurements with an extremely short delay time of 100 ns between pulses, the HZO (long O3 of 7 s)-based FeFET showed a large MW of 1.0 V. Such improvements in the performance of HZO-based FeFETs indicate that the trap density in the interfacial layer is reduced by the use of a long O3 injection time. This is supported by the variation in the silicate/SiO2 ratio within the interfacial layer of the HZO films deposited at various O3 injection times.
- 24 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (8) , eadd8328
Ultrahigh dielectric permittivity in oxide ceramics by hydrogenation
Boosting dielectric permittivity representing electrical polarizability of dielectric materials has been considered a keystone for achieving scientific breakthroughs as well as technological advances in various multifunctional devices. Here, we demonstrate sizable enhancements of low-frequency dielectric responses in oxygen-deficient oxide ceramics through specific treatments under humid environments. Ultrahigh dielectric permittivity (~5.2 × 10 6 at 1 Hz) is achieved by hydrogenation, when Ni-substituted BaTiO 3 ceramics are exposed to high humidity. Intriguingly, thermal annealing can restore the dielectric on-state (exhibiting huge polarizability in the treated ceramics) to the initial dielectric off-state (displaying low polarizability of ~10 3 in the pristine ceramics after sintering). The conversion between these two dielectric states via the ambient environment–mediated treatments and the successive application of external stimuli allows us to realize reversible control of dielectric relaxation characteristics in oxide ceramics. Conceptually, our findings are of practical interest for applications to highly efficient dielectric-based humidity sensors.
- 24 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (8) , eadd8328
Ultrahigh dielectric permittivity in oxide ceramics by hydrogenation
Boosting dielectric permittivity representing electrical polarizability of dielectric materials has been considered a keystone for achieving scientific breakthroughs as well as technological advances in various multifunctional devices. Here, we demonstrate sizable enhancements of low-frequency dielectric responses in oxygen-deficient oxide ceramics through specific treatments under humid environments. Ultrahigh dielectric permittivity (~5.2 × 10 6 at 1 Hz) is achieved by hydrogenation, when Ni-substituted BaTiO 3 ceramics are exposed to high humidity. Intriguingly, thermal annealing can restore the dielectric on-state (exhibiting huge polarizability in the treated ceramics) to the initial dielectric off-state (displaying low polarizability of ~10 3 in the pristine ceramics after sintering). The conversion between these two dielectric states via the ambient environment–mediated treatments and the successive application of external stimuli allows us to realize reversible control of dielectric relaxation characteristics in oxide ceramics. Conceptually, our findings are of practical interest for applications to highly efficient dielectric-based humidity sensors.
- Open Access
- 30 December 2022
- Published by Springer Nature in Electronic Materials Letters
- Vol. 19 (2) , 200
Correction: Selective Area Epitaxy of Complex Oxide Heterostructures on Si by Oxide Hard Mask Lift-Off
- 30 December 2022
- Published by Springer Nature in Electronic Materials Letters
- Vol. 19 (2) , 200
Open AccessCorrection: Selective Area Epitaxy of Complex Oxide Heterostructures on Si by Oxide Hard Mask Lift-Off