Tatjana Lazović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tatjana Lazović has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandar Marinković
Faculty of Mechanical Engineering, University of Belgrade, 11000 Belgrade, Serbia
8 shared publications - Pavle Ljubojević
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia
8 shared publications - Marina Dojčinović
Faculty of Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia
4 shared publications - Ivana Atanasovska
Mathematical Institute of the Serbian Academy of Sciences and Arts
3 shared publications - Blaža Stojanović
Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia
2 shared publications C. Mitrovic
2 shared publications
Latest Publications
- 28 October 2026
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 26 (Special A) , S87-S96
Estimation of roller bearing service life using computational modelling
Service life is the period during which a rolling bearing operates under cyclic contact loading before failure due to fatigue occurs. In roller bearings, repeated line contact induces alternating subsurface shear stresses, making fatigue one of the most critical failure mechanisms under practical service conditions. Accurate fatigue life prediction is therefore essential for reliable bearing design and operation. This study investigates the fatigue behaviour of roller bearings by analysing the influence of contact-induced stresses, material properties, and operating conditions on bearing service life. A numerical modelling framework based on rolling contact fatigue principles and Hertzian contact theory is employed to evaluate stress distributions within bearing components. The analysis covers key design parameters, including roller geometry and elastic material properties, together with representative loading conditions. The results define a range of design parameters and service conditions that contribute to reduced contact stresses and increased fatigue life of roller bearings, providing a basis for improved bearing design and more reliable life prediction.
- 28 October 2026
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 26 (Special A) , S87-S96
Estimation of roller bearing service life using computational modelling
Service life is the period during which a rolling bearing operates under cyclic contact loading before failure due to fatigue occurs. In roller bearings, repeated line contact induces alternating subsurface shear stresses, making fatigue one of the most critical failure mechanisms under practical service conditions. Accurate fatigue life prediction is therefore essential for reliable bearing design and operation. This study investigates the fatigue behaviour of roller bearings by analysing the influence of contact-induced stresses, material properties, and operating conditions on bearing service life. A numerical modelling framework based on rolling contact fatigue principles and Hertzian contact theory is employed to evaluate stress distributions within bearing components. The analysis covers key design parameters, including roller geometry and elastic material properties, together with representative loading conditions. The results define a range of design parameters and service conditions that contribute to reduced contact stresses and increased fatigue life of roller bearings, providing a basis for improved bearing design and more reliable life prediction.
- Open Access
- 11 June 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (6) , 237
Cavitation in Machine Elements: A Critical Review of Cavitation Damage, Experimental Methods, Standardization Challenges, and Applied Digital Technologies
Cavitation in machine elements is often accompanied by surface degradation, material loss, and a reduction in functional performance and reliability. Despite extensive research on cavitation in hydraulic systems, its role in the behavior and durability of machine elements remains insufficiently addressed. This paper presents a critical review of cavitation and cavitation-induced erosion in machine elements, based on an analysis of relevant literature and standards. The study covers different types of components, including gears, plain and rolling bearings, and seals, with particular attention to the mechanisms of damage and the methods used for their investigation. The analysis shows that, although the fundamental mechanisms of cavitation are well understood and standardized testing methods are available, their application to machine elements is limited. Existing standards are not sufficiently adapted to specific components, while current numerical and experimental approaches rarely provide a direct link between cavitation phenomena and material degradation. The findings indicate the need for improved standardization, development of integrated modelling approaches, and a closer connection between cavitation mechanisms and the performance characteristics of machine elements. The presented analysis is relevant for design, reliability assessment, maintenance strategies, and the development of cavitation-resistant machine components in hydraulic and mechanical systems.
- 11 June 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (6) , 237
Open AccessCavitation in Machine Elements: A Critical Review of Cavitation Damage, Experimental Methods, Standardization Challenges, and Applied Digital Technologies
Cavitation in machine elements is often accompanied by surface degradation, material loss, and a reduction in functional performance and reliability. Despite extensive research on cavitation in hydraulic systems, its role in the behavior and durability of machine elements remains insufficiently addressed. This paper presents a critical review of cavitation and cavitation-induced erosion in machine elements, based on an analysis of relevant literature and standards. The study covers different types of components, including gears, plain and rolling bearings, and seals, with particular attention to the mechanisms of damage and the methods used for their investigation. The analysis shows that, although the fundamental mechanisms of cavitation are well understood and standardized testing methods are available, their application to machine elements is limited. Existing standards are not sufficiently adapted to specific components, while current numerical and experimental approaches rarely provide a direct link between cavitation phenomena and material degradation. The findings indicate the need for improved standardization, development of integrated modelling approaches, and a closer connection between cavitation mechanisms and the performance characteristics of machine elements. The presented analysis is relevant for design, reliability assessment, maintenance strategies, and the development of cavitation-resistant machine components in hydraulic and mechanical systems.
- Open Access
- 7 May 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (5) , 163
Theoretical Manufacturing and Mathematical Analysis of the Spiroid Worm Grinding Process Based on a Solution to the Lead and Angular Velocity Fluctuation Problem Using Lead Angle Correction
The present study provides a comprehensive analysis of the grinding process of spiroid worm shafts, focusing on the combined application of lathe center displacement and lead angle correction on a conventional cylindrical grinding machine. The objective is to generate accurate tooth profiles for spiroid worms and spiroid hobs while minimizing lead errors and angular velocity fluctuations inherent in the worm grinding process. The implementation of lathe center displacement alters the kinematics of the workpiece, transforming the nominal circular path into an elliptical path. This kinematic modification introduces manufacturing deviations due to the continuously varying radius along the elliptical path. To address these effects, a novel mathematical model is developed, enabling the determination of an optimal grinding wheel profile for both spiroid worms and hobs under these non-ideal motion conditions. The simultaneous application of the optimized grinding wheel profile and lead angle correction is shown to significantly enhance the profile accuracy of the generated tooth geometry. Furthermore, a detailed manufacturing analysis is carried out to investigate the influence of variations in the half-taper angle on key process parameters. Based on the analytical and computational results, a methodological solution is proposed to effectively mitigate lead errors and angular velocity fluctuations in spiroid worm grinding.
- 7 May 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (5) , 163
Open AccessTheoretical Manufacturing and Mathematical Analysis of the Spiroid Worm Grinding Process Based on a Solution to the Lead and Angular Velocity Fluctuation Problem Using Lead Angle Correction
The present study provides a comprehensive analysis of the grinding process of spiroid worm shafts, focusing on the combined application of lathe center displacement and lead angle correction on a conventional cylindrical grinding machine. The objective is to generate accurate tooth profiles for spiroid worms and spiroid hobs while minimizing lead errors and angular velocity fluctuations inherent in the worm grinding process. The implementation of lathe center displacement alters the kinematics of the workpiece, transforming the nominal circular path into an elliptical path. This kinematic modification introduces manufacturing deviations due to the continuously varying radius along the elliptical path. To address these effects, a novel mathematical model is developed, enabling the determination of an optimal grinding wheel profile for both spiroid worms and hobs under these non-ideal motion conditions. The simultaneous application of the optimized grinding wheel profile and lead angle correction is shown to significantly enhance the profile accuracy of the generated tooth geometry. Furthermore, a detailed manufacturing analysis is carried out to investigate the influence of variations in the half-taper angle on key process parameters. Based on the analytical and computational results, a methodological solution is proposed to effectively mitigate lead errors and angular velocity fluctuations in spiroid worm grinding.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 8. Section,p. 898-901
The influence of ultrasonic cavitation on the surface roughness of laser-sintered MS1 steel
Cavitation is a very common phenomenon in mechanical systems involving the interaction between a solid body and a fluid acting either as a working medium or as a lubricant. Under certain operating conditions, the occurrence of cavitation leads to cavitation erosion, i.e., material degradation. Numerous experimental studies have demonstrated that cavitation erosion affects the mechanical properties of material. However, an even more pronounced effect is observed in the alteration of surface roughness. This phenomenon is not necessarily detrimental, as it has been reported in the literature that cavitation can be effectively utilized for polishing geometrically complex components, which are often produced using additive manufacturing technologies. In this study, the influence of cavitation on the surface roughness of samples fabricated by laser sintering of MS1 steel was investigated. Cavitation was experimentally induced under laboratory conditions according to ASTM G32 standard. The samples were also subjected to post-processing treatments, including heat treatment (aging) and mechanical strengthening (shot peening), enabling an analysis of the effects of different strengthening methods and their combinations on surface roughness evolution. The measurements were performed at multiple time intervals in order to monitor the progression of cavitation effects over time.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 8. Section,p. 898-901
The influence of ultrasonic cavitation on the surface roughness of laser-sintered MS1 steel
Cavitation is a very common phenomenon in mechanical systems involving the interaction between a solid body and a fluid acting either as a working medium or as a lubricant. Under certain operating conditions, the occurrence of cavitation leads to cavitation erosion, i.e., material degradation. Numerous experimental studies have demonstrated that cavitation erosion affects the mechanical properties of material. However, an even more pronounced effect is observed in the alteration of surface roughness. This phenomenon is not necessarily detrimental, as it has been reported in the literature that cavitation can be effectively utilized for polishing geometrically complex components, which are often produced using additive manufacturing technologies. In this study, the influence of cavitation on the surface roughness of samples fabricated by laser sintering of MS1 steel was investigated. Cavitation was experimentally induced under laboratory conditions according to ASTM G32 standard. The samples were also subjected to post-processing treatments, including heat treatment (aging) and mechanical strengthening (shot peening), enabling an analysis of the effects of different strengthening methods and their combinations on surface roughness evolution. The measurements were performed at multiple time intervals in order to monitor the progression of cavitation effects over time.
- Open Access
- 1 January 2026
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 113-118
The Technical Drawing Tools in the Legacy of Nikola Tesla
DoiFil - Repository of Digital Object Identifiers (DOIs) Issued by Faculty of Philology, University of Belgrade
- 1 January 2026
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 113-118
Open AccessThe Technical Drawing Tools in the Legacy of Nikola Tesla
DoiFil - Repository of Digital Object Identifiers (DOIs) Issued by Faculty of Philology, University of Belgrade
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 54 (1) , 184-197
Numerical analysis of scuffing risk in involute spur gears based on the integral temperature criterion
Gear scuffing is a major concern and a critical technical challenge in gear power transmission design. This paper reviews current research and practical approaches to understanding and preventing gear scuffing, drawing on both industrial experience, available standardization and academic studies. A dedicated MATLAB-based computational code is developed to systematically analyse the influence of geometrical, operational, and lubrication parameters on flash, mass, and integral temperatures. The results show that increasing the module, tooth number, and face width positively improve scaffing resistance, while higher torque, rotational speed, and oil temperature significantly increase scuffing risk, a failure mode that can substantially reduce gear service life. The applied model and the conducted analysis have shown that the obtained results can serve as a foundation for the development of future optimization models aimed at improving gear reliability and extending service life through appropriate parameter selection and design improvement.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 54 (1) , 184-197
Open AccessNumerical analysis of scuffing risk in involute spur gears based on the integral temperature criterion
Gear scuffing is a major concern and a critical technical challenge in gear power transmission design. This paper reviews current research and practical approaches to understanding and preventing gear scuffing, drawing on both industrial experience, available standardization and academic studies. A dedicated MATLAB-based computational code is developed to systematically analyse the influence of geometrical, operational, and lubrication parameters on flash, mass, and integral temperatures. The results show that increasing the module, tooth number, and face width positively improve scaffing resistance, while higher torque, rotational speed, and oil temperature significantly increase scuffing risk, a failure mode that can substantially reduce gear service life. The applied model and the conducted analysis have shown that the obtained results can serve as a foundation for the development of future optimization models aimed at improving gear reliability and extending service life through appropriate parameter selection and design improvement.
- Open Access
- 1 January 2026
- Published by National Library of Serbia in Thermal Science
- Vol. 30 (2 Part B) , 1563-1572
Influence of the joint geometry on heat energy, generated during the plunge stage of friction stir welding
The numerical simulation of friction stir welded T-joints made of AA2024 T3 is investigated. Analysis of heat generation due to friction and plastic work is performed, as well as of the reaction force in the normal direction during the plunge stage of the friction stir welding. The effect of joint geometry is studied for butt joints and T-joints produced from the same material. Different tool rotation speeds and tool pin lengths were considered forT-joint friction stir welding. It was shown that the temperature at the root of the weld below the tool pin is lower in the T-joint than in the butt joint, due to the efficient conduction of the heat produced through the normal plate. Also, the reaction force was higher for the T-joint than for the butt joint, so, heat production by friction was more intense in comparison with the heat produced by plastic deformation. The reaction force was moderately increased for the tool with a shorter pin, increasing both components of the heat produced. An increase in the tool rotation speed decreased the resistance to the tool plunging into the T-joint, increasing the frictional heat and decreasing the amount of heat generated by plastic deformation.
- 1 January 2026
- Published by National Library of Serbia in Thermal Science
- Vol. 30 (2 Part B) , 1563-1572
Open AccessInfluence of the joint geometry on heat energy, generated during the plunge stage of friction stir welding
The numerical simulation of friction stir welded T-joints made of AA2024 T3 is investigated. Analysis of heat generation due to friction and plastic work is performed, as well as of the reaction force in the normal direction during the plunge stage of the friction stir welding. The effect of joint geometry is studied for butt joints and T-joints produced from the same material. Different tool rotation speeds and tool pin lengths were considered forT-joint friction stir welding. It was shown that the temperature at the root of the weld below the tool pin is lower in the T-joint than in the butt joint, due to the efficient conduction of the heat produced through the normal plate. Also, the reaction force was higher for the T-joint than for the butt joint, so, heat production by friction was more intense in comparison with the heat produced by plastic deformation. The reaction force was moderately increased for the tool with a shorter pin, increasing both components of the heat produced. An increase in the tool rotation speed decreased the resistance to the tool plunging into the T-joint, increasing the frictional heat and decreasing the amount of heat generated by plastic deformation.
- 30 November 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (2) , 213-220
Influence of lubricant contamination on ball bearing rating life
This paper examines the service life of deep groove ball bearings, emphasizing a systems approach to service life calculation according to ISO 281. The contamination in the lubricant can accelerate wear and fatigue on the contact surfaces of bearings, leading to shortened service life. The paper investigates the influence of lubricant contamination on the service life of bearings using empirical data and established standard formulas. The resulting diagrams analytically show how service life varies depending on bearing size and operating conditions, such as lubricant viscosity, sealing efficiency, and load levels. The study's findings offer a more accurate understanding of ball bearing service life estimation under real operating conditions.
- 30 November 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (2) , 213-220
Influence of lubricant contamination on ball bearing rating life
This paper examines the service life of deep groove ball bearings, emphasizing a systems approach to service life calculation according to ISO 281. The contamination in the lubricant can accelerate wear and fatigue on the contact surfaces of bearings, leading to shortened service life. The paper investigates the influence of lubricant contamination on the service life of bearings using empirical data and established standard formulas. The resulting diagrams analytically show how service life varies depending on bearing size and operating conditions, such as lubricant viscosity, sealing efficiency, and load levels. The study's findings offer a more accurate understanding of ball bearing service life estimation under real operating conditions.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 107-112
CAVITATION EROSION PARAMETERS OF LASER SINTERED MS1 STEEL TESTED ACCORDING TO ASTM G32 STANDARD
The paper analyses data obtained from cavitation erosion testing of MS1 tool steel. The testing samples, cylindrical in shape with a height of 5 mm and a diameter of 10 mm, were fabricated using Direct Metal Laser Sintering (DMLS), a 3D printing technique. The samples were subjected to cavitation erosion testing in accordance with the ASTM G32 standard for a total duration of 4 hours. Mass loss measurements were recorded every 30 minutes. Based on the collected data, key parameters such as Cumulative Mass Loss, Cumulative Volume Loss, Mean Depth of Cavitation Erosion (MDE), and Mean Depth Erosion Rate (MDER) were determined and analyzed. Understanding material behaviour under cavitation conditions is crucial for its potential application in manufacturing mechanical components, particularly gears, bearings, and valves, where cavitation-induced damage is a common issue in operational environments. Given that the specimens were produced by metal powder-based 3D printing, it is especially relevant to assess the performance of such material under these conditions. This insight is particularly valuable for the geometric optimization of components to minimize erosion, where additive manufacturing offers significant advantages over conventional production technologies.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 107-112
CAVITATION EROSION PARAMETERS OF LASER SINTERED MS1 STEEL TESTED ACCORDING TO ASTM G32 STANDARD
The paper analyses data obtained from cavitation erosion testing of MS1 tool steel. The testing samples, cylindrical in shape with a height of 5 mm and a diameter of 10 mm, were fabricated using Direct Metal Laser Sintering (DMLS), a 3D printing technique. The samples were subjected to cavitation erosion testing in accordance with the ASTM G32 standard for a total duration of 4 hours. Mass loss measurements were recorded every 30 minutes. Based on the collected data, key parameters such as Cumulative Mass Loss, Cumulative Volume Loss, Mean Depth of Cavitation Erosion (MDE), and Mean Depth Erosion Rate (MDER) were determined and analyzed. Understanding material behaviour under cavitation conditions is crucial for its potential application in manufacturing mechanical components, particularly gears, bearings, and valves, where cavitation-induced damage is a common issue in operational environments. Given that the specimens were produced by metal powder-based 3D printing, it is especially relevant to assess the performance of such material under these conditions. This insight is particularly valuable for the geometric optimization of components to minimize erosion, where additive manufacturing offers significant advantages over conventional production technologies.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 53 (1) , 74-84
Structural optimisation of planetary gearbox components
The high-speed reduction in a relatively small space, coupled with a torque load capacity larger than that of any other standard transmission, positions planetary gear systems as one of the most vital components in gearing applications today. Structural analysis of a gear train is conducted using CATIA software, employing strain full tensor distribution analysis through Finite Element Method (FEM). The analysed natural frequencies and vibration modes of each component provide essential information for fine-tuning resonances away from the assembly's operating speeds. Based on these results, component dimensions are optimized using CATIA's optimizer module to achieve a structurally compact gearbox design. The minimization of gearbox mass serves as an objective function, with gear dimensions as variable parameters constrained by ultimate bending tooth root stress, safety factors, and critical frequencies expressed as inequalities. Structural optimization results are presented in tables, comparing initial natural frequencies with those obtained from the optimized solution. The final optimized design for each gear train component is also presented and discussed in the paper's concluding section. In conclusion, the paper outlines its primary objectives, summarizing key findings and proposing new ideas for further research to enhance and optimize planetary gear transmissions in practical applications.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 53 (1) , 74-84
Open AccessStructural optimisation of planetary gearbox components
The high-speed reduction in a relatively small space, coupled with a torque load capacity larger than that of any other standard transmission, positions planetary gear systems as one of the most vital components in gearing applications today. Structural analysis of a gear train is conducted using CATIA software, employing strain full tensor distribution analysis through Finite Element Method (FEM). The analysed natural frequencies and vibration modes of each component provide essential information for fine-tuning resonances away from the assembly's operating speeds. Based on these results, component dimensions are optimized using CATIA's optimizer module to achieve a structurally compact gearbox design. The minimization of gearbox mass serves as an objective function, with gear dimensions as variable parameters constrained by ultimate bending tooth root stress, safety factors, and critical frequencies expressed as inequalities. Structural optimization results are presented in tables, comparing initial natural frequencies with those obtained from the optimized solution. The final optimized design for each gear train component is also presented and discussed in the paper's concluding section. In conclusion, the paper outlines its primary objectives, summarizing key findings and proposing new ideas for further research to enhance and optimize planetary gear transmissions in practical applications.