MSMohd Farid Muhamad Said

Mohd Farid Muhamad Said

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohd Farid Muhamad Said has a total of 64 co-authors. Here are the top co-authors by number of shared publications:

  • Zulkarnain Abdul Latiff

    Automotive Development Centre, Institute for Vehicle Systems and Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia

    6 shared publications
  • Ibham Veza

    Department of Mechanical Engineering, Faculty of Engineering, Universitas Bung Karno, Jl. Kimia No. 20. Menteng, Jakarta Pusat 10320, Indonesia

    5 shared publications
  • Mohd Azman Abas

    Department of Aeronautics, Automotive and Ocean Engineering Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), Johor Bahru, Malaysia + Institute for Sustainable Transport (IST), Universiti Teknologi Malaysia (UTM), Johor Bahru, Malaysia

    5 shared publications
  • Azhar Abdul Aziz

    4 shared publications
  • Muhammad Faizullizam Roslan

    Institute for Sustainable Transport, Universiti Teknologi Malaysia, Johor Bahru, Malaysia

    3 shared publications
  • Abdullahi Tanko Mohammed

    Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

    2 shared publications

Latest Publications

  • Top Cited Papers

    Diesel vs. hydrogen-diesel dual-fuel engines for a sustainable future: A review of combustion, fuel properties, emissions, and performance

    by Sien Jie Wong, Huiyi Tan, Mohd Hafiz Dzarfan Othman, Ihab Hasan Hatif, Kok Sin Woon, Mohd Farid Muhamad Said, Fuquan Nie, Wai Shin Ho, Hong Yee Kek, William Chong Woei Fong, et al.


  • Open Access

    Acetone butanol ethanol (ABE)-diesel blends and ANN: performance, combustion, and emission prediction of ABE–diesel blends using ANN

    by Sri Mumpuni Ngesti Rahaju, Ibham Veza, Mohd Farid Muhamad Said, Muhammad Faizullizam Roslan

    Acetone–Butanol–Ethanol (ABE) fuels and Artificial Neural Network (ANN) models have gained increasing attention. ABE–diesel blends are now being studied using ANN models. The application of ANN enables accurate prediction of diesel engine performance and emissions behavior fueled with ABE-diesel blends, showing the potential of ABE-based fuels for efficient and cleaner combustion with ANN. However, the dependence of traditional diesel fuels on fossil-derived sources continues to contribute significantly to particulate matter (PM) and nitrogen oxides (NOx) emissions. This challenge has motivated the use of bio-derived oxygenated fuels as practical drop-in solutions. Among these, ABE stands out as a promising candidate because of its favorable miscibility with diesel, established fermentation pathways, and inherent oxygen content that promotes cleaner and more efficient combustion. Yet, evidence regarding in-cylinder behavior and emission trade-offs at low blend ratios remains fragmented. This study experimentally investigates ABE–diesel blends at 5% (ABE5) and 10% (ABE10) by volume in a single-cylinder diesel engine operating at 1,200 rpm under five staged load conditions. In-cylinder pressure data and regulated emissions were measured to evaluate performance, combustion, and emission responses. These datasets were then used to train Cascade ANN and Elman ANN to predict brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), and emissions (CO, CO 2 , NOx, HC) from several inputs. The results demonstrate that ABE5 consistently improved efficiency at light-to-medium loads, achieving up to 14.5% reduction in BSFC at 1 Nm and 17.5% increase in BTE compared to diesel. At higher loads (5 Nm), ABE5 converged with diesel, showing only a marginal penalty of −2.8% in BTE. In contrast, ABE10 showed mixed outcomes, with occasional gains at moderate loads but efficiency penalties at high loads (BSFC +6.5% vs. diesel at 5 Nm). Emission analysis revealed that ABE5 reduced CO by up to 48%, CO 2 by 37% at low load and ∼16% at full load, NOx by up to 32% at full load, and HC by up to 22%, while ABE10 tended to increase HC at low-to-medium loads. ANN predictions achieved good accuracy, with correlation coefficients above 0.93 for all outputs. The Elman ANN captured nonlinear performance-emission dynamics effectively, while the Cascade ANN model provided slightly higher precision for efficiency metrics. Error metrics remained consistently low, with mean absolute percentage error below 1%. Overall, this study shows that low-level ABE blending (5%) offers a practical pathway to reduce fossil diesel consumption while improving efficiency and mitigating emissions.

  • Parametric optimization of hydrotreated lemon peel oil-B10 fuel blends using response surface methodology

    by Abdullahi Tanko Mohammed, Mohd Farid Muhamad Said, Norazila Othman, Tuan Amran Tuan Abdullah, Danshehu Bagudu Gwadangaji

  • Open Access

    Recent progress on hydrogen-fueled port fuel injection spark ignition engine: A systematic review

    by Shitu Abubakar, Mohd Farid Muhamad Said, Mohd Azman Abas, Ahmad Hilmi Khalid, Muhammad Faizullizam Roslan, Najib Aminu Ismail, Samaila Umaru, Sunny Narayan, Muhammad Usman Kaisan

    The performance of H2PFI is constrained by low volumetric efficiency and combustion anomalies including pre-ignition, backfire, and knock. The current study presents a systematic literature review of studies on the H2PFI spark ignition en?gine sourced from the Scopus and WoS databases from 2014-2024. A flame arrestor can prevent flames from travelling back into the intake manifold. By reducing spark plug tip temperature, exhaust valve surface temperatures, retarding spark timing, delaying fuel injection, cooled exhaust gas re-circulation, water injection, increasing compression ratio, increasing injection pressure, retarding intake valve opening timing and lean burn, H2PFI spark ignition engine combustion anomalies and emissions can be mitigated. The combustion and performance of the engine can be enhanced through controlling the injection strategies. Water injection and exhaust gas re-circulation techniques are found effective in reducing NOx emissions. The use of zero-carbon fuels such as ammonia can be blended with hydrogen to increase the energy density of the mixture thereby increasing the volumetric efficiency. Ammonia can be blended with hydrogen to modulate flame speed, heat release rate, and mitigate engine knock. Similarly, the use of nanoadditives and catalysts to optimize hydrogen ignition properties and enable more controlled combustion is a promising research direction for H2PFI spark ignition engines.


  • Open Access

    Simulation study on the effect of injection pressure on single cylinder diesel engine fuelled with biodiesel blend

    by Yosua Setiawan, M. F. Muhamad Said

    Every year, global energy demand keeps increasing by 1.2%. An increase in energy demand might cause an increase in greenhouse gases (GHG). Biodiesel is categorized as carbon neutral fuel and can substitute pure petroleum diesel fuel. Western countries are currently pushing towards carbon neutrality and pushing vehicle electrification. Meanwhile, in countries like Indonesia biodiesel can be use as alternative fuel parallel with vehicle electrification. Much research has been conducted regarding biodiesel fuel performance and emissions ranging from low to high biodiesel blend. Even though it is considered as the best substitute, there are several challenges to implement biodiesel as diesel engine fuel. Low calorific value and high viscosity are considered as main disadvantages of biodiesel. One of them is Brake Specific Fuel Consumption (BSFC). Several studies have been conducted to increase the performance of diesel engines while still the overall performance compared to pure petroleum diesel. The problem with experimental tests is time and cost consuming. This issue can be solved by using engine simulation software like GT-Suite. Diesel fuel, B10, B50, and B100 were used in this study. Experimental study was conducted using diesel fuel, B10, and B50 using Yanmar L70N6 diesel engine as baseline data for simulation study. BSFC and Brake Thermal Efficiency (BTE) data, obtained from experimental were used as main parameter in this study. Then, the engine model simulates variation of injection pressure ranging from 206-300 bar. It was found out that increasing injection pressure to 300 bar reduces overall BSFC across all biodiesel blends and increases BTE across all biodiesel blends.

  • Open Access

    Combustion behaviour of palm kernel shell torrefied by mild pressurization technique

    by Mohd Faizal Hasan, Mohamad Zulhilmi Mat Ail, Mohd Farid Muhamad Said

    Continuous supply of the costly inert gas such as nitrogen during torrefaction is undesirable due to cost burden in terms of operational cost. Therefore, mild pressurization technique is introduced to eliminate completely the dependence on inert gas for producing solid biofuel for power generation. In the present study, the combustion behaviour of torrefied palm kernel shell (PKS) was investigated by using Thermogravimetric Analyzer (TGA) under temperature range of 30 to 900°C, heating rate of 10 and 30 °C/min, and oxygen flow rate of 20 ml/min. The used PKS has been torrefied by the mild pressurization technique for various residence times of 30 to 90 minutes and temperature of 300°C. Based on the thermogravimetry (TG) and derivative thermogravimetry (DTG) curves, it was found that the ignition temperature of the torrefied samples ranges from 276 to 285°C while the burnout temperature ranges from 476 to 482°C. For the PKS torrefied with longer residence time, the total percentage of mass loss during combustion stage becomes less. Finally, when the heating rate for TGA is changed from 10 to 30°C/min, almost same TG and DTG curves were obtained.

  • Open Access

    Feasibility Study of Biofuel Incorporated Nanoparticles as Sustainable IC Engine Fuel: Opportunities and Challenges - An overview

    by Abdullahi Tanko Mohammed, Mohd Farid Muhamad Said, Norazila Othman, Anthony Chukwunonso Opia, Ibham Veza

    The advent of biofuel as a fossil petroleum substitute has been a revolutionary concept in the realm of combustion, but it lacks some qualities that, if addressed, could improve physio-chemical properties and promote energy sustainability. Recently, introducing nanoparticles (NPs) as an additive in fuel for combustion engines has become an effective practice particularly in the automobile industry, to optimize combustion efficiency and minimize emissions. Previous researchers discovered that adding NPs into biodiesel fuel improved overall engine operation performance. Thus, the objective of the research is to summarize existing research findings on nanoparticles effects on fuel properties and engine performance. The paper investigates biofuels, bio-fuel generation classifications, nano-fuel stability, performance, and limitations, as well as current research on the influence of NPs on combustion fuel properties and engine efficiency. Prior to this, researchers have discovered that employing NPs with appropriate additives and concentrations with optimal solubility significantly reduced emissions. In comparison to basic biofuel, adding CeO2 NPs to biofuel boosted brake thermal efficiency (BTE) for low and high operation by 4.1 and 12.02%, respectively. Carbon II Oxide and unburnt hydrocarbon emissions were reduced by 16.13 and 17.59%, respectively, in comparison to pure biofuel under C20-D80 + CeO2 20 ppm. However, due to the biofuel's oxygen concentration, CO2 and NOx emission reductions were not as significant. The findings indicate that utilizing a single bio-fuel generates minimal effective power, yet by incorporating nanoparticles optimizes the operation. Furthermore, future direction of the related work will be discussed particularly on the potential benefits of incorporating NPs in fuel.


  • Open Access

    Effect of Gear Usage on the Fuel Consumption of Light Duty Vehicle by Using On-Board Diagnostics (OBD) DataEffect of Gear Usage on the Fuel Consumption of Light Duty Vehicle by Using On-Board Diagnostics (OBD) Data

    by Putradamazman, Mas Fawzi, Anwar Syahmi, Mohd Farid Muhamad Said

    Transmission gear ratio usually affects transportation fuel usage during travelled on road. The manner of gear usage is one of the main factors affecting the fuel consumption of vehicles. By using the neutralizing driving data collection, the vehicle Toyota Hilux 2.5 liters has been used to conduct the experiment to determine the fuel consumption, based on the average vehicle speed, engine speed and gear usage. Some parameters were investigated, with a special emphasis on the relation between the engine speeds and vehicle speeds, also presenting an example of using the information provided by the OBD to determine the gear ratios. In the end, the gear steps and the way they are used while driving the vehicle were identified. It is found that each gear usage can have a specific impact on fuel consumption and the usage of first gear indicates higher average fuel consumption with 60.5% with 35.8 liters/100km compared with second gear. In conclusion, the fuel consumption is significantly determined by a proper gear selection


  • Open Access

    Synthesis of Autonomous Vehicle Guideline for Public Road-Testing Sustainability

    by Amirul Ibrahim Abu Bakar, Mohd Azman Abas, Mohd Farid Muhamad Said, Tengku Azrul Tengku Azhar

    Autonomous vehicles have the potential to reduce the risk of accidents as they eliminate the element of human error from driving. Lack of attention, poor judgement, or physical limitations may lead to road incidents. Thus, the development and deployment of autonomous vehicles should be a priority. However, before being publicly available, autonomous vehicles must be tested to ensure their viability and safety by conducting public road testing. Autonomous vehicles have been designed and tested since the early 1900s; however, deployment of fully autonomous vehicles on public roads only started in the 2000s. Numerous countries have developed guidelines for public road testing, but those rules are not uniform, and discrepancies occur between nations. Issues such as vehicular safety, registrations, authority, insurance, cybersecurity, and infrastructures weigh differently in each country. Synthesizing these diverse national regulations into global guidelines would promote the safety and sustainability of autonomous vehicle testing and benefit all parties interested in autonomous vehicles.