Ran Holtzman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ran Holtzman has a total of 155 co-authors. Here are the top co-authors by number of shared publications:
- Ali Saeibehrouzi
School of Engineering, University of Warwick
6 shared publications - Enrico Segre
Department of Particle Physics and Astrophysics, Weizmann Institute of Science
5 shared publications - Lucas Goehring
School of Science and Technology, Nottingham Trent University, Clifton Lane, Nottingham, NG11 8NS, UK
5 shared publications - Marco Dentz
Spanish National Research Council (IDAEA-CSIC)
5 shared publications - Noam Weisbrod
Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research Ben‐Gurion University of the Negev Beersheba Israel
5 shared publications Petr Denissenko
5 shared publications
Latest Publications
- Open Access
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Interacting Hydrological and Mechanical Effects of Soil Water Repellency on Catchment-Scale Soil Erosion
Soil erosion threatens soil resources, agricultural productivity, and ecosystem functioning. Soil water repellency (SWR) can affect both hydrological and mechanical controls on soil erosion. While the hydrological effects of SWR, including reduced infiltration and enhanced runoff generation, are well documented, the influence of SWR-induced changes in soil mechanical resistance remains insufficiently explored. This has led to ambivalent findings in previous research, with SWR linked to both increased and decreased erosion. To address this, the physically-based LISEM model is used to examine the hydrological and mechanical impacts of SWR at the catchment scale. The hydrological effect is represented by reduced saturated hydraulic conductivity, and the mechanical effect by changes in soil cohesion. Simulations are performed for homogeneous catchments with uniform soil and land-cover conditions, as well as for heterogeneous catchments in which SWR varied by land cover or soil type, under both low-excess (natural) and high-excess (synthetic) rainfall scenarios. Results indicate that the hydrological effect of SWR consistently increases erosion through reduced infiltration and enhanced runoff. In homogeneous simulations, the influence of SWR-induced cohesion changes depends strongly on soil texture, with minor effects in coarse-textured soils. However, in finer-textured soils, particularly under high-excess rainfall, increased cohesion can markedly offset runoff-driven erosion. The heterogeneous configuration exhibits distinct erosion responses, with land cover–based heterogeneity driven by vegetation–topography interactions, whereas soil-based heterogeneity reflects differences in soil hydraulic and mechanical properties. Overall, the relative importance of the hydrological and mechanical effects of SWR varies with rainfall excess, soil texture, and the spatial distribution of SWR across the catchment, highlighting the need to consider both effects when assessing erosion.
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInteracting Hydrological and Mechanical Effects of Soil Water Repellency on Catchment-Scale Soil Erosion
Soil erosion threatens soil resources, agricultural productivity, and ecosystem functioning. Soil water repellency (SWR) can affect both hydrological and mechanical controls on soil erosion. While the hydrological effects of SWR, including reduced infiltration and enhanced runoff generation, are well documented, the influence of SWR-induced changes in soil mechanical resistance remains insufficiently explored. This has led to ambivalent findings in previous research, with SWR linked to both increased and decreased erosion. To address this, the physically-based LISEM model is used to examine the hydrological and mechanical impacts of SWR at the catchment scale. The hydrological effect is represented by reduced saturated hydraulic conductivity, and the mechanical effect by changes in soil cohesion. Simulations are performed for homogeneous catchments with uniform soil and land-cover conditions, as well as for heterogeneous catchments in which SWR varied by land cover or soil type, under both low-excess (natural) and high-excess (synthetic) rainfall scenarios. Results indicate that the hydrological effect of SWR consistently increases erosion through reduced infiltration and enhanced runoff. In homogeneous simulations, the influence of SWR-induced cohesion changes depends strongly on soil texture, with minor effects in coarse-textured soils. However, in finer-textured soils, particularly under high-excess rainfall, increased cohesion can markedly offset runoff-driven erosion. The heterogeneous configuration exhibits distinct erosion responses, with land cover–based heterogeneity driven by vegetation–topography interactions, whereas soil-based heterogeneity reflects differences in soil hydraulic and mechanical properties. Overall, the relative importance of the hydrological and mechanical effects of SWR varies with rainfall excess, soil texture, and the spatial distribution of SWR across the catchment, highlighting the need to consider both effects when assessing erosion.
- 26 March 2026
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 11 (3)
Controlling capillary fingering morphology in patterned porous media
- 26 March 2026
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 11 (3)
Controlling capillary fingering morphology in patterned porous media
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Pore network modeling of drying-induced salt precipitation
Evaporation of brine leads to salt precipitation, which can clog pores and affect further evaporation and reactions. The transport of vapor and liquid, reactions and the intricate feedback of these with change in transport properties are influenced by microstructural heterogeneity at the pore (micron to cm) scale, however their impact is felt at scales of meters and above. Evaporation-induced salt precipitation is of interest to for cultural heritage, as well as mineralization in carbon geosequestration. We present a modeling platform based on a computationally-efficient pore-network approach, that aims to perform this upscaling. The model is trained and validated by laboratory mock-ups: glass bead samples soaked in brine and left to dry under controlled environmental conditions. We apply this to study the impact of the type of salt, initial salt concentration, and the dependence of the vapor pressure on salt concentration, on the amount, location and timing of salt precipitation.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessPore network modeling of drying-induced salt precipitation
Evaporation of brine leads to salt precipitation, which can clog pores and affect further evaporation and reactions. The transport of vapor and liquid, reactions and the intricate feedback of these with change in transport properties are influenced by microstructural heterogeneity at the pore (micron to cm) scale, however their impact is felt at scales of meters and above. Evaporation-induced salt precipitation is of interest to for cultural heritage, as well as mineralization in carbon geosequestration. We present a modeling platform based on a computationally-efficient pore-network approach, that aims to perform this upscaling. The model is trained and validated by laboratory mock-ups: glass bead samples soaked in brine and left to dry under controlled environmental conditions. We apply this to study the impact of the type of salt, initial salt concentration, and the dependence of the vapor pressure on salt concentration, on the amount, location and timing of salt precipitation.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
A “Coulomb friction” model of two-phase flow in a rough fracture
An “imperfect” Hele-Shaw cell (IHSC) with random variations of the aperture provides a useful analogue for a rough fracture. For flow of two immiscible fluids with a single interface between the phases in an IHSC tilted with respect to the horizontal plane, with pressure control at the inlet, there are, in general, multiple equilibrium interface profiles. This leads to hysteresis (history dependence) of the interface evolution and finite energy dissipation even in the limit of infinitely slow (quasistatic) driving, due to Haines jumps between the equilibria.We use a recently developed spectral method that predicts the interface evolution and energy dissipation in such a system with high accuracy and computational efficiency. We show that, given the inlet pressure, the set of equilibrium interface configurations forms a band with rough boundaries. This constitutes a “sticky region”: an interface starting within it only undergoes minor deformations (maintaining its overall position without moving as a whole), whereas an interface starting outside it advances to the nearest boundary of the region. Drawing analogy between this behaviour and that of an object in a well with dry (Coulomb) friction, we hypothesise — and confirm numerically — that if the motion of the interface is reduced to a single variable, the mean height, then the evolution of this variable follows a simple law akin to a combination of viscous and dry friction. We then proceed to study systematically how the “dry friction” coefficient depends on the properties of the cell’s roughness, such as the aperture variance and the correlation length. Our results may serve as an input to an upscaled model of flow in fractures, replacing the full aperture field (typically unknown) with continuum roughness parameters.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessA “Coulomb friction” model of two-phase flow in a rough fracture
An “imperfect” Hele-Shaw cell (IHSC) with random variations of the aperture provides a useful analogue for a rough fracture. For flow of two immiscible fluids with a single interface between the phases in an IHSC tilted with respect to the horizontal plane, with pressure control at the inlet, there are, in general, multiple equilibrium interface profiles. This leads to hysteresis (history dependence) of the interface evolution and finite energy dissipation even in the limit of infinitely slow (quasistatic) driving, due to Haines jumps between the equilibria.We use a recently developed spectral method that predicts the interface evolution and energy dissipation in such a system with high accuracy and computational efficiency. We show that, given the inlet pressure, the set of equilibrium interface configurations forms a band with rough boundaries. This constitutes a “sticky region”: an interface starting within it only undergoes minor deformations (maintaining its overall position without moving as a whole), whereas an interface starting outside it advances to the nearest boundary of the region. Drawing analogy between this behaviour and that of an object in a well with dry (Coulomb) friction, we hypothesise — and confirm numerically — that if the motion of the interface is reduced to a single variable, the mean height, then the evolution of this variable follows a simple law akin to a combination of viscous and dry friction. We then proceed to study systematically how the “dry friction” coefficient depends on the properties of the cell’s roughness, such as the aperture variance and the correlation length. Our results may serve as an input to an upscaled model of flow in fractures, replacing the full aperture field (typically unknown) with continuum roughness parameters.
- Open Access
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
The effect of an oblique flow entry on the pressure losses in square channels
Flows in square channels are common in applications, such as automotive after-treatment systems and heat exchangers. Flows with axial flow entry are well understood, but for oblique flow entry, there is no clarity on the additional pressure loss magnitude or the flow regime. Laminar flow is often assumed, even though flow separation at the channel entrance can cause a transition to turbulence. Here, the impact of oblique flow entry on the flow is investigated using LES (large eddy simulation) and RANS (Reynolds averaged Navier–Stokes) models, and their advantages and limitations are identified. The LES simulations show that the shear layer at the channel entrance produces continuous shedding of eddies that persist downstream even at moderate channel Reynolds numbers (≈ 2000). The LES predicted pressure losses mostly agree with experimental data, and the differences observed are attributed to the difficulty of accurately replicating the experimental geometry. It is shown that both LES and RANS results are sensitive to the rounding of the leading edge (present in experiments). Including edge rounding improves the pressure predictions. RANS simulations mostly agree with experimens, but unlike LES did not predict transitional flow phenomena for sharp leading edge. This study provides insight into the flow structure and sources of pressure losses in square channels, highlights the importance of understanding key flow and geometric features when using LES to predict complex flows involving flow separation and shear layers, and indicates the need to further investigate the complex instability arising from interactions between secondary flow and shear-layer roll-up.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Open AccessThe effect of an oblique flow entry on the pressure losses in square channels
Flows in square channels are common in applications, such as automotive after-treatment systems and heat exchangers. Flows with axial flow entry are well understood, but for oblique flow entry, there is no clarity on the additional pressure loss magnitude or the flow regime. Laminar flow is often assumed, even though flow separation at the channel entrance can cause a transition to turbulence. Here, the impact of oblique flow entry on the flow is investigated using LES (large eddy simulation) and RANS (Reynolds averaged Navier–Stokes) models, and their advantages and limitations are identified. The LES simulations show that the shear layer at the channel entrance produces continuous shedding of eddies that persist downstream even at moderate channel Reynolds numbers (≈ 2000). The LES predicted pressure losses mostly agree with experimental data, and the differences observed are attributed to the difficulty of accurately replicating the experimental geometry. It is shown that both LES and RANS results are sensitive to the rounding of the leading edge (present in experiments). Including edge rounding improves the pressure predictions. RANS simulations mostly agree with experimens, but unlike LES did not predict transitional flow phenomena for sharp leading edge. This study provides insight into the flow structure and sources of pressure losses in square channels, highlights the importance of understanding key flow and geometric features when using LES to predict complex flows involving flow separation and shear layers, and indicates the need to further investigate the complex instability arising from interactions between secondary flow and shear-layer roll-up.
- Open Access
- 12 May 2025
- Published by Elsevier in Water Research
- Vol. 283, 123741
Solute spreading enhancement by drainage-imbibition cycles in unsaturated porous media
- 12 May 2025
- Published by Elsevier in Water Research
- Vol. 283, 123741
Open AccessSolute spreading enhancement by drainage-imbibition cycles in unsaturated porous media
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Fluid-fluid interface dynamics in an imperfect Hele-Shaw cell: A novel computational method for hysteresis and energy dissipation
In a cylindrical capillary or a Hele-Shaw cell with perfectly flat walls, the equilibrium position of the interface between two fluids given the external conditions such as the pressure head is unique. If the external conditions change infinitely slowly (quasistatically), the interface follows this equilibrium, thus, its position is history-independent; there is no energy dissipation in this quasistatic limit. In contrast, in disordered porous and fractured media there are multiple equilibria, leading to history dependence (hysteresis) of the interface evolution even in the quasistatic limit, and Haines jumps of the interface between these equilibria lead to dissipation. An imperfect Hele-Shaw cell (with a gap width randomly varying in space) provides a simple model system in which these phenomena (both in the quasistatic limit and beyond) can be studied, promoting understanding of multiphase flow in a rough fracture as well as providing insights into more complex, 3D porous media. However, even in this simple model the evolution of the interface is nontrivial due to the nonlocality brought about by the resulting fluid flow, which, in principle, requires solving the Stokes equations for the flow in the whole domain even when only the interface evolution is of interest.We present a novel spectral approach for computing the interface evolution in such a system, based on the Fourier expansion of the interface shape at each time step, confirming its accuracy via comparison to the much more computationally costly numerical solutions of the Stokes equations. We use our approach to study the (microscopic) dynamics of the interface relaxation towards equilibrium, as well as the (macroscopic) pressure-saturation trajectories following drainage/imibibition cycles. We find that even for a single perturbation (“defect”) in an otherwise perfectly uniform cell, interface relaxation dynamics in a Haines jump is a complex, multistage process. Nonetheless, we present a remarkably simple model relying on the concepts of viscous and "dry friction" dissipation, that is able to predict the pressure-saturation cycles in random media. Our findings are a promising step towards an upscaled model of flows in rough fractures, where from the macroscale properties of the roughness one could obtain the averaged interface dynamics.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessFluid-fluid interface dynamics in an imperfect Hele-Shaw cell: A novel computational method for hysteresis and energy dissipation
In a cylindrical capillary or a Hele-Shaw cell with perfectly flat walls, the equilibrium position of the interface between two fluids given the external conditions such as the pressure head is unique. If the external conditions change infinitely slowly (quasistatically), the interface follows this equilibrium, thus, its position is history-independent; there is no energy dissipation in this quasistatic limit. In contrast, in disordered porous and fractured media there are multiple equilibria, leading to history dependence (hysteresis) of the interface evolution even in the quasistatic limit, and Haines jumps of the interface between these equilibria lead to dissipation. An imperfect Hele-Shaw cell (with a gap width randomly varying in space) provides a simple model system in which these phenomena (both in the quasistatic limit and beyond) can be studied, promoting understanding of multiphase flow in a rough fracture as well as providing insights into more complex, 3D porous media. However, even in this simple model the evolution of the interface is nontrivial due to the nonlocality brought about by the resulting fluid flow, which, in principle, requires solving the Stokes equations for the flow in the whole domain even when only the interface evolution is of interest.We present a novel spectral approach for computing the interface evolution in such a system, based on the Fourier expansion of the interface shape at each time step, confirming its accuracy via comparison to the much more computationally costly numerical solutions of the Stokes equations. We use our approach to study the (microscopic) dynamics of the interface relaxation towards equilibrium, as well as the (macroscopic) pressure-saturation trajectories following drainage/imibibition cycles. We find that even for a single perturbation (“defect”) in an otherwise perfectly uniform cell, interface relaxation dynamics in a Haines jump is a complex, multistage process. Nonetheless, we present a remarkably simple model relying on the concepts of viscous and "dry friction" dissipation, that is able to predict the pressure-saturation cycles in random media. Our findings are a promising step towards an upscaled model of flows in rough fractures, where from the macroscale properties of the roughness one could obtain the averaged interface dynamics.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Impact of heterogeneity and its alteration by erosion on solute transport in unsaturated media
Solute transport in unsaturated media exhibits a complex, nonmonotonic dependence on fluid saturation and flow rates. Adding to the intricate dependence of multiphase flow and solute transport on the heterogeneity across scales is their coupling: the sensitivity of the concentration fields to the spatial distribution of the fluid phases and their velocity fields. Here, we study solute transport following partial displacement of one fluid by the other, where the fluids are immiscible and hence solute transport occurs only in one fluid and the fluid-fluid interface acts as barrier for transport. We combine pore-scale simulations (using openfoam) with microfluidic experiments to examine the role of the pore-scale heterogeneity structure (in terms of its spatial correlation) and its evolution with chemical and mechanical erosion. We find that increasing the correlation length in particle size increases fluid connectivity, and thus the solute spreading by reducing the number of advection-dominated regions. Decreasing saturation of carrier fluid (in which dissolved solutes are transported) is found to promote dead-ends (slow flow regions), and thus of diffusion. We compare two simple forms of erosion in granular media: mechanical where the smallest particles are washed away, vs. chemical where all particles are shrunk by uniform dissolution. We find that mechanical erosion, unlike chemical erosion, alters the pore space morphology toward a multi-modal variation in pore sizes, which shifts transport towards a more non-Fickian spreading. For saturated media, erosion induces a non-monotonic effect on solute spreading, promoting spreading at the diffusion-dominated (low Peclet) regime while suppressing it at higher rates (high Peclet). Under unsaturated conditions, erosion decreases spreading by reducing local velocities through widening available pathways, and enhances mixing by minimizing dead-ends which enhances the relative strength of advection.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessImpact of heterogeneity and its alteration by erosion on solute transport in unsaturated media
Solute transport in unsaturated media exhibits a complex, nonmonotonic dependence on fluid saturation and flow rates. Adding to the intricate dependence of multiphase flow and solute transport on the heterogeneity across scales is their coupling: the sensitivity of the concentration fields to the spatial distribution of the fluid phases and their velocity fields. Here, we study solute transport following partial displacement of one fluid by the other, where the fluids are immiscible and hence solute transport occurs only in one fluid and the fluid-fluid interface acts as barrier for transport. We combine pore-scale simulations (using openfoam) with microfluidic experiments to examine the role of the pore-scale heterogeneity structure (in terms of its spatial correlation) and its evolution with chemical and mechanical erosion. We find that increasing the correlation length in particle size increases fluid connectivity, and thus the solute spreading by reducing the number of advection-dominated regions. Decreasing saturation of carrier fluid (in which dissolved solutes are transported) is found to promote dead-ends (slow flow regions), and thus of diffusion. We compare two simple forms of erosion in granular media: mechanical where the smallest particles are washed away, vs. chemical where all particles are shrunk by uniform dissolution. We find that mechanical erosion, unlike chemical erosion, alters the pore space morphology toward a multi-modal variation in pore sizes, which shifts transport towards a more non-Fickian spreading. For saturated media, erosion induces a non-monotonic effect on solute spreading, promoting spreading at the diffusion-dominated (low Peclet) regime while suppressing it at higher rates (high Peclet). Under unsaturated conditions, erosion decreases spreading by reducing local velocities through widening available pathways, and enhances mixing by minimizing dead-ends which enhances the relative strength of advection.