Bright Walker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Bright Walker has a total of 210 co-authors. Here are the top co-authors by number of shared publications:
- Jung Hwa Seo
Department of Physics University of Seoul Seoul Republic of Korea
30 shared publications - Jin Young Kim
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
16 shared publications - Yeasin Khan
Kyung Hee University
12 shared publications Jin Hee Lee
University of Seoul
10 shared publicationsYu Jung Park
Department of Physics University of Seoul Seoul Republic of Korea
10 shared publications- Ju Hwan Kang
Department of Physics University of Seoul Seoul 02504 Republic of Korea
7 shared publications
Latest Publications
- Open Access
- 13 November 2026
- Published by Wiley in Advanced Materials
Scalable Hybrid Photocatalysts for Visible‐Light Degradation of Waterborne Organic Contaminants
Organic micropollutants in aquatic environments pose persistent risks to human health and ecosystems, yet current remediation technologies face scalability, stability, and secondary pollution challenges. Here, we report a visible‐light‐responsive photocatalyst prepared by covalently immobilizing benzothioxanthene imide ( BTI ), a ton‐scale industrial dye, onto macroscopic oxide supports (Al 2 O 3 , zeolites). The densely grafted BTI forms H‐aggregates that suppress radiative decay, enabling efficient interfacial electron transfer, generating hydroxyl (OH • ) and superoxide (O 2 •– ) radicals without co‐catalysts. This system achieves degradation of a diverse range of contaminants (e.g., dyes, pharmaceuticals, and agrochemicals) into CO 2 and CO under low‐intensity visible light, with no detectable activity loss over 12 months of continuous operation. A pilot‐scale flow reactor packed with millimeter‐sized BTI ‐functionalized beads demonstrates efficient treatment of real dye mixtures under ambient conditions, highlighting scalability, recoverability, and compatibility with decentralized wastewater treatment. This work establishes a sustainable, modular platform for water purification, particularly in resource‐limited settings.
- 13 November 2026
- Published by Wiley in Advanced Materials
Open AccessScalable Hybrid Photocatalysts for Visible‐Light Degradation of Waterborne Organic Contaminants
Organic micropollutants in aquatic environments pose persistent risks to human health and ecosystems, yet current remediation technologies face scalability, stability, and secondary pollution challenges. Here, we report a visible‐light‐responsive photocatalyst prepared by covalently immobilizing benzothioxanthene imide ( BTI ), a ton‐scale industrial dye, onto macroscopic oxide supports (Al 2 O 3 , zeolites). The densely grafted BTI forms H‐aggregates that suppress radiative decay, enabling efficient interfacial electron transfer, generating hydroxyl (OH • ) and superoxide (O 2 •– ) radicals without co‐catalysts. This system achieves degradation of a diverse range of contaminants (e.g., dyes, pharmaceuticals, and agrochemicals) into CO 2 and CO under low‐intensity visible light, with no detectable activity loss over 12 months of continuous operation. A pilot‐scale flow reactor packed with millimeter‐sized BTI ‐functionalized beads demonstrates efficient treatment of real dye mixtures under ambient conditions, highlighting scalability, recoverability, and compatibility with decentralized wastewater treatment. This work establishes a sustainable, modular platform for water purification, particularly in resource‐limited settings.
- 21 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (17) , 7387-7394
Ambipolar to Unipolar Transition in Y6 Based OFETs via PFN+Br- Doping
Achieving unipolar n-type transport in Y6-based organic field-effect transistors (OFETs) is challenging due to the intrinsic ambipolar nature of Y6, which leads to low on/off current ratios, high threshold voltages, and unreliable n-type operation. Here, we report a systematic study on polarity control of Y6 OFETs through direct doping with the ionic conjugated polymer PFN+Br-. Electrical characterization reveals a clear transition from ambipolar to unipolar n-type conduction, accompanied by a substantial enhancement in charge-carrier mobility, on/off current ratios (from ∼10 to 104), and reduced threshold voltages. Complementary spectroscopic analyses, including XPS, UPS, XAS, UV–Vis absorption, and GIWAXS, provide insight into the evolution of the electronic structure and microstructure with doping. At an optimal doping concentration of ∼15%, the Fermi level shifts towards the LUMO edge, leading to efficient electron injection and effective hole blocking, while maintaining favorable molecular ordering for charge transport. Excessive doping (>20%) induces structural disorder, increased trap density, and a recovery of ambipolar characteristics, resulting in performance degradation. This work establishes a clear structure-property relationship for doping in Y6-based OFETs and demonstrates ionic polymer doping as an effective strategy to achieve high-performance unipolar n-type organic transistors.
- 21 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (17) , 7387-7394
Ambipolar to Unipolar Transition in Y6 Based OFETs via PFN+Br- Doping
Achieving unipolar n-type transport in Y6-based organic field-effect transistors (OFETs) is challenging due to the intrinsic ambipolar nature of Y6, which leads to low on/off current ratios, high threshold voltages, and unreliable n-type operation. Here, we report a systematic study on polarity control of Y6 OFETs through direct doping with the ionic conjugated polymer PFN+Br-. Electrical characterization reveals a clear transition from ambipolar to unipolar n-type conduction, accompanied by a substantial enhancement in charge-carrier mobility, on/off current ratios (from ∼10 to 104), and reduced threshold voltages. Complementary spectroscopic analyses, including XPS, UPS, XAS, UV–Vis absorption, and GIWAXS, provide insight into the evolution of the electronic structure and microstructure with doping. At an optimal doping concentration of ∼15%, the Fermi level shifts towards the LUMO edge, leading to efficient electron injection and effective hole blocking, while maintaining favorable molecular ordering for charge transport. Excessive doping (>20%) induces structural disorder, increased trap density, and a recovery of ambipolar characteristics, resulting in performance degradation. This work establishes a clear structure-property relationship for doping in Y6-based OFETs and demonstrates ionic polymer doping as an effective strategy to achieve high-performance unipolar n-type organic transistors.
- 31 July 2026
- Published by Wiley in Advanced Materials Technologies
Hybrid Electrolyte‐Doped OFETs Enabling Synaptic Plasticity and Physical Reservoir Computing
Emerging applications such as brain‐machine interfaces, bio‐compatible prosthetics, and adaptive soft robotics rely on artificial neuromorphic devices that can interface directly with biological systems. To address this need, we demonstrate organic field‐effect transistors (OFETs) doped with a hybrid electrolyte, 1,4‐di‐ tert ‐butylbenzene‐2,5‐bis(1‐propoxy‐3‐sulfonate) lithium salt ( BBOPSO 3 Li ), as novel artificial synaptic devices. Incorporation of BBOPSO 3 Li into poly(3‐hexylthiophene) (P3HT) channels enables precise modulation of shallow trap states through the close energetic alignment of BBOPSO 3 Li with the P3HT HOMO (∼0.1 eV offset), resulting in tunable threshold voltage, controllable hysteresis, and enhanced carrier mobility. Doped devices exhibit outstanding synaptic functions, including excitatory postsynaptic current (EPSC), paired‐pulse facilitation (PPF), and long‐term potentiation–depression (PD) with analog weight updates. An optimal doping level of 0.070 mol% provides the highest excitability, balanced temporal memory characteristics, and the widest conductance window. System‐level validation demonstrated improved classification accuracy (up to 89.8% on MNIST‐like datasets) and robust time‐series prediction in a physical reservoir computing framework, achieving a normalized mean square error of −32 dB. These findings demonstrate that hybrid electrolytes capable of self‐doping can be used to introduce well‐defined, reversible trap states, allowing control of synaptic plasticity and temporal dynamics in OFETs, advancing their potential as efficient neuromorphic computing platforms.
- 31 July 2026
- Published by Wiley in Advanced Materials Technologies
Hybrid Electrolyte‐Doped OFETs Enabling Synaptic Plasticity and Physical Reservoir Computing
Emerging applications such as brain‐machine interfaces, bio‐compatible prosthetics, and adaptive soft robotics rely on artificial neuromorphic devices that can interface directly with biological systems. To address this need, we demonstrate organic field‐effect transistors (OFETs) doped with a hybrid electrolyte, 1,4‐di‐ tert ‐butylbenzene‐2,5‐bis(1‐propoxy‐3‐sulfonate) lithium salt ( BBOPSO 3 Li ), as novel artificial synaptic devices. Incorporation of BBOPSO 3 Li into poly(3‐hexylthiophene) (P3HT) channels enables precise modulation of shallow trap states through the close energetic alignment of BBOPSO 3 Li with the P3HT HOMO (∼0.1 eV offset), resulting in tunable threshold voltage, controllable hysteresis, and enhanced carrier mobility. Doped devices exhibit outstanding synaptic functions, including excitatory postsynaptic current (EPSC), paired‐pulse facilitation (PPF), and long‐term potentiation–depression (PD) with analog weight updates. An optimal doping level of 0.070 mol% provides the highest excitability, balanced temporal memory characteristics, and the widest conductance window. System‐level validation demonstrated improved classification accuracy (up to 89.8% on MNIST‐like datasets) and robust time‐series prediction in a physical reservoir computing framework, achieving a normalized mean square error of −32 dB. These findings demonstrate that hybrid electrolytes capable of self‐doping can be used to introduce well‐defined, reversible trap states, allowing control of synaptic plasticity and temporal dynamics in OFETs, advancing their potential as efficient neuromorphic computing platforms.
- Open Access
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 38204-38212
Controlling the Polarity of Ag:PSS Polyelectrolyte Interfacial Layers in Organic Solar Cells
A critical factor affecting the efficiency of organic solar cells is the interfacial material between the electrode and the active layer. Developing interlayer systems whose electronic properties can be systematically tuned through simple compositional modification is attractive because it may enable more symmetric device architectures, simplified processing, and improved control of interfacial energetics. In this study, we prepared an interfacial control material by replacing p-doped poly(3,4-ethylenedioxythiophene) (PEDOT) in the well-known hole-transporting material (HTM) PEDOT:poly(styrenesulfonate) (PSS) with silver (Ag+ ions). Ag:PSS by itself was found to have insulating properties and did not yield compelling results as an HTM alone. However, we were able to control the polarity of Ag:PSS by mixing it with either PEDOT:PSS or poly(ethylenimine) (PEI), enabling its use as both HTM and electron transport material (ETM), respectively. By employing p-type and n-type Ag:PSS, we achieved power conversion efficiencies of up to 8.482% with a PTB7:PC71BM active layer. To analyze the effects on band structure, we used ultraviolet photoelectron spectroscopy (UPS) and inverse photoemission spectroscopy (IPES) to reveal systematic changes in energy bands that followed the interlayer composition. Our study demonstrates how compositional modification of Ag:PSS influences interfacial energetics and charge extraction behavior.
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 38204-38212
Open AccessControlling the Polarity of Ag:PSS Polyelectrolyte Interfacial Layers in Organic Solar Cells
A critical factor affecting the efficiency of organic solar cells is the interfacial material between the electrode and the active layer. Developing interlayer systems whose electronic properties can be systematically tuned through simple compositional modification is attractive because it may enable more symmetric device architectures, simplified processing, and improved control of interfacial energetics. In this study, we prepared an interfacial control material by replacing p-doped poly(3,4-ethylenedioxythiophene) (PEDOT) in the well-known hole-transporting material (HTM) PEDOT:poly(styrenesulfonate) (PSS) with silver (Ag+ ions). Ag:PSS by itself was found to have insulating properties and did not yield compelling results as an HTM alone. However, we were able to control the polarity of Ag:PSS by mixing it with either PEDOT:PSS or poly(ethylenimine) (PEI), enabling its use as both HTM and electron transport material (ETM), respectively. By employing p-type and n-type Ag:PSS, we achieved power conversion efficiencies of up to 8.482% with a PTB7:PC71BM active layer. To analyze the effects on band structure, we used ultraviolet photoelectron spectroscopy (UPS) and inverse photoemission spectroscopy (IPES) to reveal systematic changes in energy bands that followed the interlayer composition. Our study demonstrates how compositional modification of Ag:PSS influences interfacial energetics and charge extraction behavior.
- Open Access
- 23 May 2026
- Published by Wiley in Small Structures
- Vol. 7 (5) , e70463
Achieving the High Color Conversion Efficiency by Using Efficient Energy Transfer Rates in Organic Nanocrystals
Color conversion materials for next‐generation displays are fundamentally limited by architectures that rely on direct blue‐light absorption, requiring high‐emitter loading, thick films which often suffer from residual blue leakage, and instability. Here, we report a Förster resonance energy transfer (FRET)–dominated color conversion strategy based on surfactant‐stabilized organic nanocrystals (ONCs), in which nanoscale energy funneling, via resonant energy transfer, governs photon conversion efficiency rather than optical density. Binary color conversion films (CCFs) are constructed from blue‐emissive donor and green/red acceptor ONCs with precisely planned spectral overlap and nanoscopic proximity. This enables efficient FRET (70–80% efficiency and rate ≈8 × 10 8 s −1 ) that rapidly transfers energy from donors to acceptors prior to donor emission. The resulting mechanism effectively decouples blue absorption from emission, suppressing blue leakage and minimizing reabsorption losses. As a result, the ONC films achieve color conversion efficiencies of 85–90% and exhibit competitive performance relative to state‐of‐the‐art systems, with a lower concentration and thickness of 11–12 µm. These ONC films further preserve high color purity, enabling wide color gamuts of 88.76% BT.2020 and 112.2% NTSC, alongside excellent photostability under blue excitation. This work establishes FRET as a powerful design paradigm for ultra‐efficient, thin, and stable CCFs for display applications.
- 23 May 2026
- Published by Wiley in Small Structures
- Vol. 7 (5) , e70463
Open AccessAchieving the High Color Conversion Efficiency by Using Efficient Energy Transfer Rates in Organic Nanocrystals
Color conversion materials for next‐generation displays are fundamentally limited by architectures that rely on direct blue‐light absorption, requiring high‐emitter loading, thick films which often suffer from residual blue leakage, and instability. Here, we report a Förster resonance energy transfer (FRET)–dominated color conversion strategy based on surfactant‐stabilized organic nanocrystals (ONCs), in which nanoscale energy funneling, via resonant energy transfer, governs photon conversion efficiency rather than optical density. Binary color conversion films (CCFs) are constructed from blue‐emissive donor and green/red acceptor ONCs with precisely planned spectral overlap and nanoscopic proximity. This enables efficient FRET (70–80% efficiency and rate ≈8 × 10 8 s −1 ) that rapidly transfers energy from donors to acceptors prior to donor emission. The resulting mechanism effectively decouples blue absorption from emission, suppressing blue leakage and minimizing reabsorption losses. As a result, the ONC films achieve color conversion efficiencies of 85–90% and exhibit competitive performance relative to state‐of‐the‐art systems, with a lower concentration and thickness of 11–12 µm. These ONC films further preserve high color purity, enabling wide color gamuts of 88.76% BT.2020 and 112.2% NTSC, alongside excellent photostability under blue excitation. This work establishes FRET as a powerful design paradigm for ultra‐efficient, thin, and stable CCFs for display applications.
- 27 April 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (12) , 923
One-pot synthesis and blue-shifted emission of In(Ga)P quantum dots
- 27 April 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (12) , 923
One-pot synthesis and blue-shifted emission of In(Ga)P quantum dots
- Open Access
Color‐Tunable Organic Nano‐Dots: Synthesis and Applications in Color Conversion and Security Inks
This study explores the synthesis of water‐based color‐tunable organic nanodots (CTONDs) capable of emitting multiple colors, including white light, by adjusting the molar ratio of blue, green, and red emissive fluorophores in the particles. Spectroscopic analyses reveal that the emissions are due to Forster resonance energy transfer (FRET) between the energy donor and acceptor nanoparticles. The energy transfer efficiencies are high, reaching over 90% in the film state due to the close packing of NDs while in their film state. Various molar ratios produced different colors in both liquid dispersions and in the solid state. These CTONDs demonstrate over 60% color conversion efficiency (CCE) when applied as color conversion layers (CCLs) in light‐emitting devices, maintaining photostability for over four months under ambient conditions. Additionally, their aqueous processability and multicolor tunability make them attractive for environmentally friendly display technologies, flexible optoelectronics, and anti‐counterfeiting applications such as security inks. This work offers a scalable and sustainable approach to fabricating tunable, solution‐processed fluorescent organic nanomaterials and underscores their promise as a versatile platform for next‐generation photonic and optoelectronic applications.
Open AccessColor‐Tunable Organic Nano‐Dots: Synthesis and Applications in Color Conversion and Security Inks
This study explores the synthesis of water‐based color‐tunable organic nanodots (CTONDs) capable of emitting multiple colors, including white light, by adjusting the molar ratio of blue, green, and red emissive fluorophores in the particles. Spectroscopic analyses reveal that the emissions are due to Forster resonance energy transfer (FRET) between the energy donor and acceptor nanoparticles. The energy transfer efficiencies are high, reaching over 90% in the film state due to the close packing of NDs while in their film state. Various molar ratios produced different colors in both liquid dispersions and in the solid state. These CTONDs demonstrate over 60% color conversion efficiency (CCE) when applied as color conversion layers (CCLs) in light‐emitting devices, maintaining photostability for over four months under ambient conditions. Additionally, their aqueous processability and multicolor tunability make them attractive for environmentally friendly display technologies, flexible optoelectronics, and anti‐counterfeiting applications such as security inks. This work offers a scalable and sustainable approach to fabricating tunable, solution‐processed fluorescent organic nanomaterials and underscores their promise as a versatile platform for next‐generation photonic and optoelectronic applications.
- Open Access
Synthesis of a Stable Radical Cation of Bis‐Tert‐Butyl Ethylenedioxythiophene and its Application as a Dopant in Organic Semiconductors
A highly stable molecular radical cation (RC) derived from ethylenedioxy thiophene (EDOT) is effectively utilized for the p‐doping of poly‐3‐hexylthiophene (P3HT), an organic semiconductor. The success of this process is due to efficient electron transfer from the highest occupied molecular orbital band of P3HT to the singly unoccupied molecular orbital of the radical cation species. Confirmation of the doping is experimentally confirmed through UV–vis‐NIR absorption spectroscopy and electron spin resonance spectroscopy. The ability to dope the conjugated polymers PBTTT and PTB7 is also spectroscopically confirmed. An increase in work‐function of P3HT upon doping is observed due to electron transfer from P3HT to the radical cation with a concomitant decrease in the Fermi energy of P3HT. Impedance and four point probe analysis showed that the doped polymer films exhibited a significant decrease in resistance compared to the pristine films. This work presents the first use of a stable, easily synthesized EDOT‐based radical cation as a molecular p‐dopant for conjugated polymers, offering a novel and broadly applicable alternative to traditional dopants such as F 4 TCNQ.
Open AccessSynthesis of a Stable Radical Cation of Bis‐Tert‐Butyl Ethylenedioxythiophene and its Application as a Dopant in Organic Semiconductors
A highly stable molecular radical cation (RC) derived from ethylenedioxy thiophene (EDOT) is effectively utilized for the p‐doping of poly‐3‐hexylthiophene (P3HT), an organic semiconductor. The success of this process is due to efficient electron transfer from the highest occupied molecular orbital band of P3HT to the singly unoccupied molecular orbital of the radical cation species. Confirmation of the doping is experimentally confirmed through UV–vis‐NIR absorption spectroscopy and electron spin resonance spectroscopy. The ability to dope the conjugated polymers PBTTT and PTB7 is also spectroscopically confirmed. An increase in work‐function of P3HT upon doping is observed due to electron transfer from P3HT to the radical cation with a concomitant decrease in the Fermi energy of P3HT. Impedance and four point probe analysis showed that the doped polymer films exhibited a significant decrease in resistance compared to the pristine films. This work presents the first use of a stable, easily synthesized EDOT‐based radical cation as a molecular p‐dopant for conjugated polymers, offering a novel and broadly applicable alternative to traditional dopants such as F 4 TCNQ.
- Open Access
- 17 February 2025
- Published by Elsevier in Next Energy
- Vol. 8
Enhanced p-doping and efficiency in organic solar cells using Mg and Pd ions at the HTL/PTB7 interface
- 17 February 2025
- Published by Elsevier in Next Energy
- Vol. 8
Open AccessEnhanced p-doping and efficiency in organic solar cells using Mg and Pd ions at the HTL/PTB7 interface
- 14 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (11)
Diverse Metal Ion Polyelectrolytes as Hole Transport Layers for Quasi‐2D Perovskite Light‐Emitting Diodes
This work investigates the role of metal ion‐doped (Cs+, Ni2+, and Cu2+) PEDOT:PSS films as hole transport layers (HTLs) in quasi‐2D perovskite light‐emitting diodes (PeLEDs). These HTLs lead to enhanced device performance through reduced defect density, improved hole mobility, and prolonged photoluminescence lifetime. X‐ray diffraction (XRD) reveals structural modifications in CsPbBr3 films, with enhanced crystallinity resulting from the elimination of excess long‐chain cations. Morphological analyses using scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrate the influence of metal doping on surface coverage and nanoscale roughness. Time‐resolved photoluminescence (TR‐PL) analysis confirms reduced nonradiative recombination, supporting improved film quality. Devices with Ni:PEDOT:PSS exhibit the highest external quantum efficiency, while Cs:PEDOT:PSS and Cu:PEDOT:PSS offer enhanced stability, achieving significantly longer operational lifetimes. These findings highlight the potential of metal‐doped PEDOT:PSS in optimizing the structural, optical, and electrical properties of perovskite materials, paving the way for more stable and efficient PeLEDs.
- 14 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (11)
Diverse Metal Ion Polyelectrolytes as Hole Transport Layers for Quasi‐2D Perovskite Light‐Emitting Diodes
This work investigates the role of metal ion‐doped (Cs+, Ni2+, and Cu2+) PEDOT:PSS films as hole transport layers (HTLs) in quasi‐2D perovskite light‐emitting diodes (PeLEDs). These HTLs lead to enhanced device performance through reduced defect density, improved hole mobility, and prolonged photoluminescence lifetime. X‐ray diffraction (XRD) reveals structural modifications in CsPbBr3 films, with enhanced crystallinity resulting from the elimination of excess long‐chain cations. Morphological analyses using scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrate the influence of metal doping on surface coverage and nanoscale roughness. Time‐resolved photoluminescence (TR‐PL) analysis confirms reduced nonradiative recombination, supporting improved film quality. Devices with Ni:PEDOT:PSS exhibit the highest external quantum efficiency, while Cs:PEDOT:PSS and Cu:PEDOT:PSS offer enhanced stability, achieving significantly longer operational lifetimes. These findings highlight the potential of metal‐doped PEDOT:PSS in optimizing the structural, optical, and electrical properties of perovskite materials, paving the way for more stable and efficient PeLEDs.