Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dmitry Lvovich Wainstein has a total of 164 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of air temperature and humidity on the corrosion of cobalt

    by L. K. Avdeeva, L. V. Godulyan, A. I. Kovalev, D. L. Wainstein, V. O. Vakhrushev


  • Open Access

    Features of Tribooxidation of the High-Entropy Coating (AlCrZrTiTa)N during Dry High-Speed Cutting

    by Anatoly Kovalev, Dmitry Wainstein, Egor Konovalov, Vladimir Vakhrushev, German Fox-Rabinovich, Michael Fox-Rabinovich, Stanislav Dmitrievskii, Alexandr Tomchuk

    The high-entropy PVD coating (AlCrZrTiTa)N, characterized by its high hardness (50–60 GPa), elastic modulus above 300 MPa, and high heat resistance up to 1300 °C, is used for coating cutting tools operating under extreme metalworking conditions. The nanostructured monolayer 3 μm PVD coating was deposited on cutting plates in the hybrid arc deposition PVD coater. The coating had an amorphous nanocrystalline microstructure with a grain size of about 10–50 nm. The samples of SS 304 steel were investigated during dry high-speed (600 m/min) cutting. Raman spectroscopy was used to study the formation of tribooxides on the tool surface at the running-in stage of the cutting. After 130 m of cutting, Cr2O3 oxide appears on the wear surface while other elements are bound with N atoms. When the cutting length is increased to up to 260 m, oxide Al2O3 · ZrO2 (mullite) and amorphous oxides TaO2 and CrO2 are formed. The method EELFS made it possible to determine the amorphous nanocrystalline structure of triboceramics based on CrO2 and Al2O3 · ZrO2. The nearest atomic surrounding of Cr-Cr, O-O, and Cr-O and their subsequent comparison with the available literature data allow us to calculate the equilibrium lattice constants of the CrO2 unit cell, which are equal to (a, b) = 4.3754 Å and c = 0.5927. The triboceramic films on the base of non-equilibrium mullite Al2O3·ZrO2 have an amorphous structure. In the first coordination sphere, the interatomic distances of Zr-O and Al-O were 1.79 and 1.89 Å. An accelerated adaptive reaction to extreme external stimuli, at the very beginning of the running-in stage, is established. The tribological adaptability of the high-entropy ultra-fine amorphous nanocrystalline coating under extremely loaded dry high-speed cutting is based on non-equilibrium phenomena: the partial oxidation of fragments of the nitride and dynamic formation of protective tribooxides, which have a good thermal barrier and frictional properties. These factors interact synergistically and determine the life of the cutting tool.


  • New Level of Development of Secondary Ion Mass Spectroscopy for Materials Science

    by A. I. Kovalev, V. O. Vakhrushev, D. L. Wainstein, A. Yu. Rashkovsky, A. A. Tomchuk, S. A. Dmitrievskii, E. P. Konovalov, A. D. Mukhsinova, A. I. Volkov


  • Open Access

    Determination of Composition of Raw Materials for Porcelain Fabrication by XRF, TOF-SIMS, and XPS Methods for Further Porcelain Art Items Characterisation and Detection of Modern Counterfeits

    by Dmitry Wainstein, Vladimir Vakhrushev, Anatoly Kovalev, Egor Konovalov, Anton Volkov, Maria Shipova

    Modern surface analysis techniques are expanding significantly possibilities in description and attribution of historical artifacts. The present study is aimed to compare analytical ability of the X-ray fluorescent analysis (XRF) typically applied for studies ceramic art items with novel surface analysis methods: time-of-flight secondary ions mass spectroscopy (SIMS) and X-ray photoelectron spectroscopy (XPS) that were applied on measurements of elemental compositions of powder raw materials for porcelain fabrication: pegmatite P-1, Vesco-prima clay, kaolin, bone earth, dolomite, and feldspar. It was shown that SIMS successfully measures light elements unnoticeable for XRF such as lithium, beryllium, boron and heavy impurities not found out by XRF such as cobalt, cerium, copper, rubidium, vanadium. XPS has found thorium in the kaolin sample that was not detected by SIMS and XRF. The paper provides also values of chemical shifts of some XPS lines observed in materials under examination. The obtained information on relations of basic and impurity elements revealed by XRF and SIMS together with XPS chemical shifts data could be used to expose contemporary falsifications of historical porcelain and to attribute porcelain items during conservation process.


  • Open Access

    Features of the Oxidation of Multilayer (TiAlCrSiY)N/(TiAlCr)N Nanolaminated PVD Coating during Temperature Annealing

    by Anatoly Ivanovich Kovalev, Vladimir Olegovich Vakhrushev, Egor Pavlovich Konovalov, German Simonovich Fox-Rabinovich, Dmitry Lvovich Wainstein, Stanislav Alekseevich Dmitrievskii, Alise Denisovna Mukhsinova

    A nano-multilayer Ti0.2Al0.55Cr0.2Si0.03Y0.02N/Ti0.25Al0.65Cr0.1N PVD coating was deposited on Kennametal carbide K 313 inserts. These coatings are widely used to protect cutting tools under severe exploitation conditions. Under equilibrium conditions, it was found that the Al2O3 oxide possessed better adhesive properties than the TiO2. The addition of chromium further enhanced the oxidation resistance of the coatings. Silicon significantly increased the oxidation resistance of this type of coating. The properties of the diffusion process in this coating have not been sufficiently investigated, despite the considerable number of articles published on this topic. For the purpose of this study, a multilayer ion-plasma (TiAlCrSiY)N/(TiAlCr)N coating was oxidized under equilibrium conditions; its chemical inhomogeneity was studied by time-of-flight mass spectroscopy using a TOF SIMS5-100 instrument. The data was collected from an area of 100 × 100 µ. A D-300 profilometer (KLA-Tencor Corp., Milpitas, California 95035, USA) was used to determine the rate of ion etching. It was found that oxidation commenced at the surface nanolayer of a TiAlCrN nitride, forming loose films of Cr2O3, TiO2, and Al2O3 oxides. This passivating film had a thickness of around 140 nm. For the first time, the interlayer diffusion coefficients of Si and Y were determined in multilayer coatings based on Ti0.2Al0.55Cr0.2Si0.03Y0.02N/Ti0.25Al0.65Cr0.1N, under open air annealing at 700 °C. The physical nature of the differences in the diffusion of these elements is discussed. The diffusion rate in the near-surface volumes was lower than in the deep layers of the multilayer coating, most likely due to the formation of passivating oxide films on the surface.


  • Open Access

    Features of microstructure and composition of 18th century dutch tiles revealed by SEM, XRF, XPS, and TOF-SIMS

    by D. Wainstein, V. Vakhrushev, A. Kovalev, E. Konovalov, A. N. Volkov, U. Kologrieva, A. Mukhsinova, T. Shlykova, A. Leonidova, M. Shipova

    Partially fragmented faience tiles made of ceramic dough of light yellow color with a fine texture, covered with a white glaze (enamel) and decorated by blue and brown ornaments in an underglaze technique were visually estimated by art history expertise as Dutch ones fabricated in the 18th century. Several fragments of the tiles with blue and brown paintings with dimensions less than 20x20 mm were selected for instrumental studies. The paper presents results on microstructure of the tiles’ obtained by scanning electron microscopy (SEM) and composition of glaze and douhg measured by the set of methods with different spatial and depth resolution: X-ray fluorescence (XRF), X-ray photoelectron spectroscopy (XPS), and time-of-flight mass-spectroscopy (TOF-SIMS). The obtained information was compared with literature data describing features of microstructure and elemental composition of attributed Dutch tiles fabricated in Amsterdam, Rotterdam, Utrecht, and Harlinger. It was found that investigated sample with blue painting can be attributed as Dutch one fabricated in the beginning of 18th century while fabrication date and place of brown samples should be should be clarified by further literature analysis.

  • Open Access

    Damage Accumulation Phenomena in Multilayer (TiAlCrSiY)N/(TiAlCr)N, Monolayer (TiAlCrSiY)N Coatings and Silicon upon Deformation by Cyclic Nanoindentation

    by Anatoly I. Kovalev, Vladimir O. Vakhrushev, Ben D. Beake, Egor P. Konovalov, Dmitry L. Wainstein, Stanislav A. Dmitrievskii, German S. Fox-Rabinovich, Stephen Veldhuis

    The micromechanism of the low-cycle fatigue of mono- and multilayer PVD coatings on cutting tools was investigated. Multilayer nanolaminate (TiAlCrSiY)N/(TiAlCr)N and monolayer (TiAlCrSiY)N PVD coatings were deposited on the cemented carbide ball nose end mills. Low-cycle fatigue resistance was studied using the cyclic nanoindentation technique. The obtained results were compared with the behaviour of the polycrystalline silicon reference sample. The fractal analysis of time-resolved curves for indenter penetration depth demonstrated regularities of damage accumulation in the coatings at the early stage of wear. The difference in low-cycle fatigue of the brittle silicon and nitride wear-resistant coatings is shown. It is demonstrated that when distinguished from the single layer (TiAlCrSiY)N coating, the nucleation and growth of microcracks in the multilayer (TiAlCrSiY)N/(TiAlCr)N coating is accompanied by acts of microplastic deformation providing a higher fracture toughness of the multilayer nanolaminate (TiAlCrSiY)N/(TiAlCr)N.


  • Open Access

    Analysis of Hydrometallurgical Methods for Obtaining Vanadium Concentrates from the Waste by Chemical Production of Vanadium Pentoxide

    by Ulyana Kologrieva, Anton Volkov, Irina Krasnyanskaya, Pavel Stulov, Dmitry Wainstein

    The paper describes hydrometallurgical methods to recycle wastes of vanadium pentoxide chemical fabrication. Sludges containing a significant amount of V2O5 can be considered as an additional source of raw materials for vanadium production. We studied the one-stage leaching method using various iron-based reductants for converting V5+ to V4+ in a solution allowing to precipitate V when its concentration in the solution is low. As a result of the reduction leaching with further precipitation, we obtained concentrates with V2O5 content of 22–26% and a high amount of harmful impurities. Multistage counterflow leaching can be used to fabricate solutions with vanadium pentoxide concentration suitable for vanadium precipitation by hydrolysis and adding ammonium salts. The solutions with V2O5 content of ≈15 g/L can be obtained from the initial sludge by three-stage counterflow vanadium leaching. A concentrate with a content of 78 wt% V2O5 can be precipitated from these solutions at pH = 2.4 by adding ammonium chloride. Additionally, concentrate with V2O5 content of ≈94 wt% was precipitated from the solution with a concentration of >20 g/L V2O5 obtained from the roasted sludge. The concentrates were purified for increasing the vanadium content to 5–7%. The consumption and technological parameters of the considered processes are presented in the paper.


  • Open Access

    Composition of glaze layer of the 18th century tiles

    by V O Vakhrushev, D L Wainstein, A I Kovalev, E P Konovalov, A D Mukhsinova, T V Shlykova

    There were studied glaze layers of fragments of painted tiles estimated by art historians basing on external signs as fabricated in the Netherlands in the 18th century. The paper presents results of glaze surface composition measurements by X-ray fluorescence (XRF) and X-ray photoelectron spectroscopy (XPS), time-of-flight mass-spectroscopy (TOF-$$$SIMS) methods in comparison with literature data. Information on composition of glaze layers including pigments will be used obtained in this research will be used in further conservation efforts.


  • Open Access

    Investigation of Vanadium-Containing Sludge Oxidation Roasting Process for Vanadium Extraction

    by Ulyana Kologrieva, Anton Volkov, Dmitry Zinoveev, Irina Krasnyanskaya, Pavel Stulov, Dmitry Wainstein

    Vanadium containing sludge is a by-product of vanadium pentoxide obtained by hydrometallurgical methods from vanadium slag that can be estimated as a promising technogeneous raw material for vanadium production. The phase analysis of vanadium-containing sludge by the X-ray diffraction method showed that it contains vanadium in spinel form (FeO∙V2O3). The various oxidation roasting methods for sludge treatment were studied for increasing vanadium extraction into the solution. It showed that the most effective additive is 1% CaCO3 at a roasting temperature of 1000 °C. Oxidation roasting of vanadium-containing sludge with the additive led to an increase in the acid-soluble form of V2O5 from 1.5% to 3.7% and a decrease in the content of FeO∙V2O3 from 3% to 0.4%. These results confirm the efficiency of the application of oxidation roasting to convert vanadium compounds into acid-soluble forms. The conversion mechanism of spinel to acid-soluble phases during oxidation roasting with additives was investigated by thermogravimetric analysis and thermodynamic simulation. It showed that the formation of acid-soluble calcium vanadates during oxidation roasting without additives occurs at temperatures above 800 °C while CaCO3 addition allows one to reduce this temperature to 600 °C.