Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Feng Yan has a total of 256 co-authors. Here are the top co-authors by number of shared publications:

  • Lin Li

    22 shared publications
  • Jacob Wall

    Materials Sciences and Engineering Program School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA

    11 shared publications
  • Liping Guo

    9 shared publications
  • Wenjun Xiang

    Materials Science and Engineering Program, School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, AZ, 85287, USA

    9 shared publications
  • Xiaomeng Duan

    Materials Science and Engineering Program School for Engineering of Matter, Transport and Energy Arizona State University Arizona USA

    9 shared publications
  • Kausar Khawaja

    School for Engineering of Matter, Transport and Energy

    8 shared publications

Latest Publications

  • Open Access

    Air-Stable, Water-Soluble Antimony Precursor Enables Ambient Doping of Efficient and Stable CdSeTe Solar Cells

    by Yizhao Wang, Timothy Nagle, Hasan Imam, Zikun Cao, Yufeng Zheng, He Wang, Lin Li, James Becker, Yanfa Yan, Feng Yan

    Group-V doping in cadmium selenide telluride (CdSeTe) solar cells has emerged as a transformative strategy, significantly improving absorber electronic quality and device operational stability, as exemplified by a champion power conversion efficiency (PCE) of 23.1% with phosphorus doping. While various Group V dopants, such as As, P, Sb, and Bi, have been successfully incorporated into CdSeTe via in situ and ex situ doping routes, existing ex situ Group V doping approaches are severely bottlenecked by the acute toxicity of many Group V precursors and by their susceptibility to oxidation and hydrolysis during atmospheric coating. Here, we overcome this limitation by introducing an air-stable, water-soluble antimony potassium tartrate (APT) as an eco-friendly antimony precursor, enabling seamless solution coating completely in open air. Thermal pyrolysis of the ambient-coated APT converts it into an amorphous antimony oxide and oxychloride surface reservoir, and a subsequent forming gas treatment removes the residual oxides, activates substitutional Sb doping, and induces favorable grain texturing. The resulting CdSeTe devices exhibit a higher hole density, improved diode ideality, and suppressed non-radiative recombination. This ambient-compatible workflow yields devices with open-circuit voltages exceeding 855 mV and a PCE of 20.1%, together with improved stability under 1 sun light soaking at 85 °C relative to Cu-doped references. This work establishes a robust, environmentally benign, and highly scalable ex situ diffusion Group V doping protocol that bridges the gap between high-performance Group V doping and low-cost industrial manufacturing.

  • Crystallization-controlled phase purification and optical coupling strategy for efficient all-inorganic perovskite-organic tandem solar cells

    by Xiaoyu Gu, Yu Han, Xue Lai, Yizhao Wang, Xiaowei Xu, Chengwei Shan, Feng Yan, Gang Li, Aung Ko Ko Kyaw

  • Synergistic Graphene Polishing Enabling van der Waals Anchors for Efficient and Robust Carbon‐Based Perovskite Solar Cells

    by Kausar Ali Khawaja, Muzhi Li, Christopher Picart, Yizhao Wang, Nicholas Rolston, Lin Li, Feng Yan

    Carbon‐based perovskite solar cells (C‐PSCs) offer a low‐cost, stable alternative to metal electrodes; however, the high porosity of carbon electrodes leads to poor interfacial contact and weak mechanical adhesion to the underlying carrier transport layer, limiting device performance and robustness. Here, we report a solvent‐free additive polishing strategy using a synergistic combination of two‐dimensional (2D) graphene nanoplatelets and 3D graphite flakes to densify the hole‐transport‐layer (HTL)/carbon interface by creating conformal van der Waals (vdW) anchors. This graphene/graphite additive polishing process fills micro‐voids on the porous carbon electrode surface, reduces carbon electrode surface roughness, and creates a graphene anchor that increases interfacial fracture energy and promotes the carbon surface heating release. Electrically, the polished interface facilitates superior charge extraction, thereby reducing charge‐transfer resistance. Consequently, regular n ‐ i ‐ p perovskite solar devices achieve a promised power conversion efficiency (PCE) of 23.28% (0.09 cm 2 ) and maintain a high PCE of 19.62% at a scalable 1.0 cm 2 area. This work provides a high‐throughput, dry‐processing paradigm for more affordable, robust, and highly efficient carbon‐based perovskite photovoltaics.

  • Forming Gas Annealing Improves the Performance of Ex Situ Sb‐Doped CdSeTe Thin‐Film Solar Cells

    by Sabin Neupane, Deng‐Bing Li, Abasi Abudulimu, Manoj K. Jamarkattel, Chun‐Sheng Jiang, Kiran Lamichhane, Sanjeeb Budhathoki, Alisha Adhikari, Ujjwal Dhakal, Hamim Sharif, et al.

    Group V doping in cadmium‐selenide‐telluride (CdSeTe) polycrystalline thin‐film solar cells has demonstrated improved power conversion efficiencies (PCEs) and long‐term stabilities as compared to the traditional Cu doping in the last decade. The dopants can be successfully incorporated by either in situ or ex situ doping. Here, we report that forming gas (FG) annealing enhances the efficiencies of CdSeTe polycrystalline thin‐film solar cells utilizing ex situ antimony (Sb) doping via close‐space sublimation of SbCl 3 at ambient pressure. The FG annealing increases the hole density and carrier lifetime, reduces the back barrier height, and, therefore, leads to improved open‐circuit voltages (V OC s) and fill factors (FFs). The champion device achieves a PCE of 19.2% with a V OC of 877 mV, a current density (J SC ) of 30.2 mA/cm 2 , and an FF of 72.4%. Importantly, the Sb‐doped devices showed improved stability under stress tests as compared to Cu‐doped devices.

  • Intrinsic Nonlinearity Modulation in Two-Dimensional (Cu,Ag)InP 2 S 6 for Selectorless Nonvolatile Memory Array

    by Sai Prakash Maddineni, Yujian Huang, Kausar Khawaja, Kenna Ashen, Kaiji Zhao, Deepak V. Pillai, Lin Li, Yufeng Zheng, Michael A. Susner, Xiaofeng Qian, et al.

    Selectorless resistive random-access memory is essential for scaling high-density crossbar arrays, yet suppressing sneak path currents (SPCs) without external selector components remains a major challenge. In this work, we investigated a two-dimensional (2D) van der Waals (vdW) mixed cation crystal Cu0.5Ag0.5InP2S6 (CAIPS) as a switching layer and systematically compared its resistive switching with CuInP2S6 (CIPS) and AgInP2S6 (AIPS). The coexistence of Cu+ and Ag+ ions produces asymmetric out-of-plane diffusion barriers, as confirmed by first-principles density functional theory (DFT) calculations, leading to self-rectifying transport and the intrinsic suppression of leakage in arrays. CAIPS-based devices exhibit stable bipolar resistive switching, a high intrinsic nonlinearity factor (>10 under a V/3 read scheme), a large memory window (>9× at Vread = 0.1 V), and low variability (coefficient of variation down to 5.1%), surpassing the performance of both CuInP2S6 (CIPS) and AgInP2S6 (AIPS). These features, combined with low operational switching voltages, robust endurance, and built-in nonlinearity highlight CAIPS as a promising material for scalable selectorless memory arrays, with direct relevance to energy-efficient neuromorphic and edge-computing architectures.

  • Advances in Carbon Electrode Integration for Stable and Efficient Perovskite Solar Cells and Modules

    by Jacob Wall, Feng Yan

    Carbon‐electrode‐based perovskite solar cells (C‐PSCs) have emerged as a cost‐effective and scalable alternative to noble‐metal‐based PSCs, addressing critical challenges related to device stability, fabrication complexity, and commercialization potential. This review explores the recent progress in C‐PSC development, focusing on the benefits of carbon electrodes (CEs), including their hydrophobicity, chemical inertness to halide corrosion, and compatibility with low‐temperature cost‐effective solution‐based deposition methods. Despite relatively lower power conversion efficiencies (PCEs) than their metal (e.g., Au/Ag) counterparts, recent advances in carbon paste formulation, interfacial contact engineering, and work function modification have elevated C‐PSC efficiencies above 22%. This review further examines strategies to enhance electrode conductivity, interfacial properties, and charge selectivity to further increase C‐PSC performance. Progress in carbon‐electrode‐based perovskite solar modules (C‐PSMs), particularly within mesoporous and planar architectures, is also analyzed, revealing significant developments in active area scaling and long‐term stability. Notably, the limited research in inverted (PIN) C‐PSCs is also highlighted as a compelling opportunity for innovation, given the architecture's inherent advantages in flexibility, tandem integration, and low‐temperature processing. Collectively, these insights affirm the potential of C‐PSCs and C‐PSMs to deliver affordable, stable, and high‐performance photovoltaics suitable for scalable deployment.


  • Cold air quench control of local crystallization environment in fully air-processed carbon-based perovskite solar cells

    by Christopher Picart, Kausar Ali Khawaja, Zikun Cao, Yizhao Wang, Xiaoyu Gu, Jacob Wall, Lin Li, He Wang, Feng Yan


  • Core–Shell Cd(S,Se)/ZnS Quantum Dots as Rear-Interface Modifiers for Efficient CdSeTe Thin-Film Solar Cells

    by Yizhao Wang, Mengmeng Yuan, Xiaoyu Gu, Connor Cagno, Lin Li, James Becker, Feng Yan

  • A Review of Interface Engineering in Antimony Chalcogenide Thin Film Solar Cells

    by Al Amin, Connor Cagno, Yizhao Wang, Feng Yan

    Antimony chalcogenides (Sb 2 X 3 , where X = S, Se, or S x Se 1−x ) are promising materials for thin‐film solar cells due to their tunable bandgaps (1.1–1.8 eV), high absorption coefficients (>10 5 cm −1 ), nontoxicity, and earth‐abundant composition. Recent advancements have achieved power conversion efficiencies (PCEs) exceeding 10%, with a record of 10.81% for Sb 2 (S, Se) 3 cells. However, interface‐related issues, such as recombination losses and open‐circuit voltage ( V OC ) deficits, limit performance. Interface engineering strategies have significantly improved device efficiency and stability, including buffer layer optimization, defect passivation, surface treatments, post‐processing, and doping. This review summarizes the latest developments in these areas, discusses ongoing challenges, and proposes future research directions to enhance the performance of antimony chalcogenide solar cells.