AKAnna Korre

Anna Korre

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anna Korre has a total of 152 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Modelling of CO2-enriched Spent Fluids Reinjection to Maintain Reservoir Pressure and Improve Production Performance at the Kızıldere Geothermal Field

    by Sevket Durucan, Ji-Quan Shi, Anna Korre, Wenzhuo Cao, Mahmut Parlaktuna, Erdinc Senturk

    The geothermal fluid at Kızıldere is produced from carbonate rocks and carries a significant amount of dissolved CO2 (over 3% by weight depending on depth), which is mostly exhausted to the atmosphere as non-condensable gas during power generation. Geothermal fluid production since 2013 has been accompanied by reinjection of spent fluids back into the geothermal reservoir. While contributing to the maintenance of reservoir pressure, rejection of spent fluids has also, to a large extent, resulted in considerable decline of dissolved CO2 in the geothermal reservoir, which behaves as a natural pump during the ascend of geothermal fluid in the wells. As a part of the SUCCEED (Synergetic Utilisation of CO2 storage Coupled with geothermal EnErgy Deployment) project, a dynamic reservoir model representing the Kızıldere geothermal field was developed and calibrated against field natural state well temperature and pressure profiles. The calibrated dynamic model was then used to simulate brine production and reinjection of CO2-depleted fluids and CO2-enriched depleted fluids. Reservoir simulations have shown that reinjection of CO2-enriched spent fluids has the potential to re-establish the geothermal reservoir CO2 content, thus reducing CO2 emission, while having the advantage of further maintaining reservoir pressure.

  • Open Access

    Methodology for Human Health Risk Assessment Around Amine Based Post-Combustion Carbon Capture Plants

    by Quentin T. Wolf, Maria Lathouri, Ji-Quan Shi, Anna Korre, Sevket Durucan

    In this study, a risk assessment methodology for assessing the adverse health effects from potentially carcinogenic or mutagenic amines and amine degradation products (nitrosamines and nitramines, N-Amines) emitted from post combustion carbon capture plants was developed. Hereby, the main focus was the integration of a detailed air dispersion modelling process to estimate ground level amine degradation product concentrations with a location specific human health risk assessment process, considering the human chronic residential exposure to the substances via the inhalation pathway. Since the quality of input data for the air dispersion modelling is of critical importance, a detailed data preparation process was developed. In order to enable a contextualized human health risk assessment, a spatial receptor allocation process was developed to enable the calculation of the cancer risk in the region of interest for every individual. The approach developed is illustrated for a case study set at the Teesside industrial cluster in the UK. A number of annual air dispersion modelling simulations have been conducted for a period of five years to enable a non-parametric statistical method to derive a representative ground level air concentration of the sum of all N-Amines as annual averages. The spatial max concentration of this representative N-Amines concentration reached 58.9 % of the UK environmental assessment level for the annual average of NDMA. For the facility configuration assessed, the integration of the exposure concentration into the human health risk assessment at Teesside showed that the maximum residential risk for any individual in the region of interest lays well below the reference risk of one in 100,000 and may exceed the reference risk of one in one million for only four out of the 228,833 individuals with a spatial max at 1.159 times. Given the assumptions made for the amine used and facility configurations, the potential PCCC plant deployments investigated at the Teesside industrial cluster pose no relevant additional risk to public health.


  • Open Access

    Exploring the value of CO2 shipping transport flexibility in international batchwise transportation carbon capture and storage networks

    by Denis Fraga, Anna Korre, Zhenggang Nie, Sevket Durucan

    The benefits of CO₂ shipping transport within international Carbon Capture and Storage (CCS) networks have been growing in importance as it offers flexibility and allows to postpone investment in capital-intensive infrastructure until enough CCS projects are launched. This work explores this value through a comparative cost assessment of 15 what-if scenarios devised for standalone and integrated CCS networks, designed around the Northern Lights project and the UK's Teesside cluster. The analysis is performed by implementing a Multi-period, Multi-mode, and Multi-objective Mixed integer linear programming (MoMilp) model developed at Imperial College London and considering all the elements of the CCS value chain after CO2 is captured (i.e. conditioning, intermediate storage and injection in the saline aquifer), allowing to account for individual regional characteristics in terms of design and network costs. The configurations of the different scenarios are used to analyse the implications of CCS network development hold up, e.g. for a part of the network to become available at a later period, or for the CO2 emission growth to occur at a later time in the planning horizon. The simulation results illustrate the interplay between postponing CCS network infrastructure investment and generating gains of scale in an existing network. This flexibility between CCS networks could provide relevant cost reduction while maximising the storage of CO2.

  • Open Access

    A proxy model for saline aquifers characterised with a dome-structure capable of handling variable CO2 injection rates

    by Efsion Andre, Ji-Quan Shi, Sevket Durucan, Anna Korre

    The large-scale implementation of Carbon Capture, Utilisation, and Storage (CCUS) requires an available and flexible transport and storage network that can handle varying CO₂ supply rates from different sources. Such a network must provide flexibility in transport, storage, and utilisation capacity to accommodate the supply of captured CO₂. Numerical simulations have been used to predict storage performance and capacity under various conditions, however, they require substantial resources and time to run. A proxy model for saline aquifers characterised by a dome structure was developed, with a focus on the Bunter Closure 36 located in the Southern North Sea in the UK. The proxy model was built using the machine learning technique XGBoost (Extreme Gradient Boosting) to provide estimation for the dome pressure, injection well bottomhole pressure (BHP) and injected CO₂ cumulative under variable injection rates and multi-realisations of storage parameters

  • Open Access

    Life cycle environmental impact assessment of Kızıldere geothermal power plants and optimised rate CO2 reinjection scenarios through numerical modelling

    by Zhenggang Nie, Ji-Quan Shi, Sevket Durucan, Anna Korre, Mahmut Parlaktuna, Erdinc Senturk

    The geothermal fluid at Kızıldere in Turkey is produced from carbonate rocks and carries a significant amount of dissolved CO2 (mostly over 3% by weight depending on depth). The SUCCEED (Synergetic Utilisation of CO2 storage Coupled with geothermal EnErgy Deployment) project aimed at demonstrating the feasibility of utilising produced and subsequently vented CO2 for re-injection into the reservoir to improve geothermal performance, while also storing the CO2. The project also aimed at developing life cycle assessment (LCA) and technoeconomic/life cycle cost (LCC) models for geothermal power generation and use these models to demonstrate the environmental benefits of CO2 reinjection and storage in geothermal reservoirs. This paper presents the findings of a life cycle environmental impact assessment study for the Kızıldere II geothermal power plant (GPP) through a number of CO2 reinjection scenarios. The findings for the Kızıldere III plant operations are also summarised to provide a comparison for the emissions from its much deeper production wells. CO2 reinjection in the field is assumed to have started in 2022, approximately 9 and 5 years after these plants started power generation and continue until 2042 and 2045, respectively. Key findings indicated that, without CO2 reinjection, the life cycle CO2 emissions for Kızıldere II and Kızıldere III are likely to be 140 kg CO2/MWh and 444 kg CO2/MWh, respectively. For Kızıldere II, CO2 reinjection lowers emissions to 110 kg CO2/MWh, while for Kızıldere III, emissions would be reduced to 186/185 kg CO2/MWh, mainly due to the emissions that took place until 2022.

  • Environmental and Life Cycle Assessment of Lithium(I) Carbonate Production from Lithium(I) Containing Brines

    by Zijing He, Anna Korre, G. H Kelsall, Melanie Colet Lagrille

    Lithium(I) consumption is predicted to continue growing exponentially to support the rapidly expanding lithium-ion battery (LIB) market. Extracting Li(I) from lithium(I)-containing brine is commonly used for production of battery-grade Li2CO3, an essential component in LIB production. Lithium(I)-containing brine resources are abundant in a specific region in South America, often referred to as the Lithium Triangle, including the Chilean Atacama Desert. This study aims to establish a detailed and up-to-date life cycle inventory (LCI) of battery-grade Li2CO3 production from brine in Chile’s Atacama Desert based on parameter modelling, literature, technical reports, and Ecoinvent database. The comprehensive analysis of the environmental impacts conducted includes brine production and modelling evaporation through three scenarios: engineering calculations, Penman equation and measured data. Rates of evaporation of brine are influenced by weather and salinity changes, so corrections to data are necessary. Process modelling was conducted in Aspen Plus and the modelling method was set as ELECNRTL. The northern Chile electricity grid was modelled, as was the water footprint (WF) of the production process. Once emissions are estimated, the LCA modelling software Sphera is used, according to ISO 14040, with the functional unit set to the production of 1 kg of battery-grade Li2CO3. Based on the ReCiPe 2016 v1.1 midpoint characterisation method and AWARE method, the environmental impacts and water scarcity footprint (WSF) have been analysed and will be presented. The results showed that most of the environmental impacts arose from sodium hydroxide (NaOH), sodium carbonate (Na2CO3), water and electrical energy consumption for the entire Li2CO3 production process. Solvent extraction is used to remove borates from the brines, requiring aqueous NaOH for re-extraction from the organic solvent. The major contribution is from the chlor-alkali electrolytic process for NaOH production. Na2CO3 is required for removal of MgII and CaII aqueous species as corresponding carbonate precipitates, and for Li2CO3 formation. The required process water was used as a solvent and as wash water. The northern Chile electricity grid is powered by 48.46 % natural gas and 34.8 % hard coal, as well as 8.7 % photovoltaic energy. The overall global warming potential (GWP) of the process was 5.82 kg CO2 (kg Li2CO3)-1. 75.84 % of the GWP was incurred by NaOH production, 14.01 % by Na2CO3 production and 8.30 % by electrical energy generation; other components contributed < 5 %. The environmental impacts of the mining and evaporation processes were caused primarily by electricityconsumption, whereas the GWP of the Li2CO3 chemical production process was determined mainly by the chemicals used. The results also showed that in waste management, the infiltration caused by waste piles accumulated near the production site and surface impoundments has an insignificant impact, although large areas of land are occupied. For WF and WSF, the blue WF, which is the consumption of surface and ground water, was 0.16 m3 (kg Li2CO3)-1 and the chemical production process blue WF accounted for 87.50 %. NaOH production in chlor-alkali processes consumes water by the reaction 2H2O + 2e- → H2 + 2OH-, accounting for 74.8 % of the blue WF of the chemical production process. Hence, oxygen diffusion cathodes are advocated to decrease specific electrical energy consumptions by ca. a third by substituting the above cathode reaction by: O2 + 2H2O + 4e- → 4OH-, so decreasing CO2 emissions and enabling GWP savings of 24.1 %. Additionally, comparison of H2O to OH- ratios between conventional membrane chlor-alkali processes (H2O : OH- = 1) and those utilizing oxygen reduction cathodes (H2O : OH- = 0.5) indicates water consumption could be decreased. Despite the small amount of WF, the impact on water scarcity was 13.1 m3 world equivalent per kg Li2CO3 in this arid desert, so it is essential to decrease water consumption and increase its recycling. The comparative performance of different modelling approaches for the LCI parameters, combined with the borate re-extraction overlooked in previous such LCA studies, has enabled a more detailed LCI and environmental assessment which can identify hotspots and decrease water consumption and environmental impacts. However, further work is needed to simulate and compare the environmental impacts, water consumption, and economic benefits of selective lithium(I) recovery from brines by electrochemical processes and by conventional evaporation methods.


  • Open Access

    Environmental and life cycle assessment of lithium carbonate production from Chilean Atacama brines

    by Zijing He, Anna Korre, Geoffrey H Kelsall, Zhenggang Nie, Melanie Colet Lagrille

    A detailed up-to-date life cycle inventory of Li2CO3 production from brine is established and several environmental impacts has been analysed.


  • Open Access

    Rockburst and Gas Outburst Forecasting using a Probabilistic Risk Assessment Framework in Longwall Top Coal Caving Faces

    by Harshit Agrawal, Sevket Durucan, Wenzhuo Cao, Anna Korre, Ji-Quan Shi

    A probabilistic risk assessment framework was developed to mathematically represent the complex engineering phenomena of rock bursts and gas outbursts for a heterogeneous coal seam. An innovative object-based non-conditional simulation approach was used to distribute lithological heterogeneity present in the coal seam to respect their geological origin. The changing mining conditions during longwall top coal caving mining (LTCC) were extracted from a coupled numerical model to provide statistically sufficient data for probabilistic analysis. The complex interdependencies among abutment stress, pore pressure, the volume of total gas emission and incremental energy release rate, their stochastic variations and uncertainty were realistically implemented in the GoldSim software, and 100,000 equally likely scenarios were simulated using the Monte Carlo method to determine the probability of rock bursts and gas outbursts. The results obtained from the analysis incorporate the variability in mechanical, elastic and reservoir properties of coal due to lithological heterogeneity and result in the probability of the occurrence of rock bursts, coal and gas outbursts, and safe mining conditions. The framework realistically represents the complex mining environment, is resilient and results are reliable. The framework is generic and can be suitably modified to be used in different underground mining scenarios, overcoming the limitations of earlier empirical indices used.


  • Cost and Carbon Footprint Reduction of Electric Vehicle Lithium-Ion Batteries through Efficient Thermal Management

    by Laura Lander, Evangelos Kallitsis, Alastair Hales, Jacqueline Edge, Anna Korre, Gregory James Offer