Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zane Zelca has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Microwave-assisted synthesis of Mn1.92O4@carbon nanocomposite for enhanced photocatalytic degradation of thiophene and cadmium chloride under simulated solar irradiation

    by Bilal Khaled, Abderrhmane Bouafia, Abdelmadjid Guerram, Chaima Salmi, Djamel Barani, Mahmood M. S. Abdullah, Salah Eddine Laouini, Zane Zelca


  • Defect-engineered MgO nanoparticles with high surface area for integrated solar-driven CO2 reduction and hydrogen generation

    by Abdelatif Aouadi, Hocine Sadam Nesrat, Sara Aouadi, Abderrhmane Bouafia, Djamila Hamada Saoud, Salah Eddine Laouini, Mamoun Fellah, Hafidha Terea, Mahmood M. S. Abdullah, Zane Zelca


  • Open Access

    Development of an Energy Harvesting System for the Conversion of Mechanical Energy of Human Movement into Electrical Energy and Its Integration into High Performance Wearable Clothing

    by Silvija Kukle, Juris Blūms, Aleksejs Kataševs, Ieva Baķe, Vilnis Jurķāns, Ilgvars Gorņevs, Gaļina Terļecka, Zane Zelča, Aleksandrs Okss

    In many smart textile development studies, sensors and electro-conductive yarns have been widely investigated and used as essential components, especially in the fields of medicine, sport, work wear, and special applications. Wearable sensors provide a means to monitor the wearer’s health through physiological measurements in a natural setting or are used to detect potential hazards and alert users and/or caretakers. The aim of the research is to develop a prototype of wearable electronics that consists of high-performance clothing with an integrated energy harvesting system for converting the mechanical energy of human movements into electrical energy. Within the framework of the research, a system for determining human physiological and/or environmental parameters and transmitting data was developed and integrated into clothing modified with sol–gel technology for indoor and outdoor use. Although the created flat inductive elements of the energy harvesting system retain their performance during the hydrothermal treatment process, at the same time, the other elements of the smart clothing system (especially electro-conductive yarns) rapidly lose their electrical conductivity. The modified knitwear provided a longer time between washing cycles to protect the embedded wearable electronics, and the impact of surface modification with sol–gel on wearing comfort was evaluated.


  • Open Access

    Electrospun Fibrous Materials with Propolis Extracts for Edible Food Packagings

    by Zane Zelca, Remo Merijs-Meri, Andres Krumme, Aina Bernava

    In this study, propolis additives provide antibacterial and antifungal effects that prolong the product’s shelf life. The aim of the study is to obtain homogeneous fiber membranes of polyvinyl alcohol and propolis by the electrospinning method and to evaluate their suitability for food packaging. Three propolis extracts are used in the study—water, ethyl alcohol, and glycerin-based. The membranes’ morphology and fiber diameter distribution, tensile deformation, air permeability, thermogravimetric analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, and microbiological tests (Listeria monocytogenes, Salmonella enteritidis, Escherichia coli) were analyzed for electrospun samples. The results of the study show that propolis extracts are incorporated into membranes and the additive provides an antimicrobial effect with the contact surface. The obtained membranes are breathable: gas exchange can be controlled by using a material of appropriate thickness (air permeability coefficient is 0.046 and 0.276 mm/s). The mechanical properties of membranes are affected by moisture, but tensile strength can be improved with thermal post-processing at 100 °C. The propolis-containing fibers’ diameters are from 293 ± 8 to 664 ± 11 nm. Depending on membranes’ demonstrated properties, it can be concluded that the composites have the potential to increase the shelf life of fresh fruits and berries.


  • Open Access

    Effect of Electrode Type on Electrospun Membrane Morphology Using Low-Concentration PVA Solutions

    by Zane Zelca, Andres Krumme, Silvija Kukle, Mihkel Viirsalu, Laimdota Vilcena

    Electrospun polymer nanofiber materials have been studied as basic materials for various applications. Depending on the intended use of the fibers, their morphology can be adjusted by changing the technological parameters, the properties of the spinning solutions, and the combinations of composition. The aim of the research was to evaluate the effect of electrode type, spinning parameters, polymer molecular weight, and solution concentration on membranes morphology. The main priority was to obtain the smallest possible fiber diameters and homogeneous electrospun membranes. As a result, five electrode types were selected, the lowest PVA solution concentration for stable spinning process was detected, spinning parameters for homogenous fibers were obtained, and the morphology of electrospun fiber membranes was analyzed. Viscosity, conductivity, pH, and density were evaluated for PVA polymers with five different molecular weights (30–145 kDa) and three concentration solutions (6, 8, and 10 wt.%). The membrane defects and fiber diameters were compared as a function of molecular weight and electrode type. The minimum concentration of PVA in the solution allowed more additives to be added to the solution, resulting in thinner diameters and a higher concentration of the additive in the membranes. The molecular weight, concentration, and electrode significantly affected the fiber diameters and the overall quality of the membrane.


  • Open Access

    Propolis Integration Methods into Solutions for Highly Loaded Propolis Fibers by Needleless Electrospinning

    by Zane Zelca, Silvija Kukle, Sarmite Janceva, Laimdota Vilcena

    A load-bearing matrix filled with biologically active compounds is an efficient method for transporting them to the target location. Bee-made propolis has long been known as a natural product with antibacterial and antiviral, anti-inflammatory, antifungal properties, and anti-oxidative activity. The aim of the research is to obtain stable propolis/PVA solutions and produce fibers by electrospinning. To increase propolis content in fibers as much as possible, various types of propolis extracts were used. As a result of the research, micro- and nano-fiber webs were obtained, the possible use of which have biomedical and bioprotective applications. All used materials are edible and safe for humans, and fiber webs were prepared without using any toxic agent. This strategy overcomes propolis processing problems due to limitations to its solubility. The integration of different combinations of extracts allows more than 73 wt% of propolis to be incorporated into the fibers. The spinning solution preparation method was adapted to each type of propolis, and by combining the methods, solutions with different propolis extracts were obtained. Firstly, the total content of flavonoids in the propolis extracts was determined for the assessment and prediction of bioactivity. The properties of the extracts relevant for the preparation of electrospinning solutions were also evaluated. Secondly, the most appropriate choice of PVA molecular weight was made in order not to subject the propolis to too high temperatures (to save resources and not reduce the bioactivity of propolis) during the solution preparation process and to obtain fibers with the smallest possible diameter (for larger surface-to-volume ratios of nanofibers and high porosity). Third, electrospinning solutions were evaluated (viscosity, pH, conductivity and density, shelf life) before and after the addition of propolis to predict the maximum propolis content in the fibers and spinning stability. Each solution combination was spun using a cylindrical type electrode (suitable for industrial production) and tested for a stable electrospinning process. Using adapted solution-mixing sequences, all the obtained solutions were spun stably, and homogeneous fibers were obtained without major defects.


  • Open Access

    Water Absorption and Tensile Properties of Hemp Waste and Polyethylene Composites

    by Zane Zelca, Silvija Kukle, Janis Kajaks

    This research focuses on improving the mechanical properties of linear low density polyethylene (LLDPE) composites reinforced with hemp waste and reducing water absorption. Cross-linking is introduced between the filler and the polymeric matrix. Cleaning the filler surface of dusts with alkali pre-treatment promotes an increase of the aforementioned properties. Hemp waste pre-treatment with TEOS and modified sols decrease composite water absorption and elongation at break, but silanization increase elastic module. The choice of different silanes for the treatment of hemp waste and treatment method affects the properties of composite.


  • Properties of Hemp Fibres Reinforced PLA Composites

    by Anete Smoca, Silvija Kukle, Zane Zelсa

    In this study 3 samples of bio-composite materials with different proportion of hemp fibers in the PLA matrix were developed, their comparative analysis and certain mechanical properties were investigated. Bio-composite hemp and polylactide (PLA) fibers were evenly blended using carding technology. The obtained blanks were treated for thermosetting at a fixed temperature of 180°C and a pressure of 100 kN, as well as controlled heating, compression and cooling time were applied. The mechanical properties (tensile strength σt, elastic modulus Et, relative extension ɛt) of composite material were determined.


  • Open Access

    Sol–gel coating processing optimization for natural fibres; pp. 467–472

    by Zane Zelca, Svetlana Vihodceva, Silvija Kukle

    Functionality of natural fibres can be enhanced by sol–gel technology. The sol–gel process has to be adapted with regard to the type of coated fibres and to the applied sol. In this research, pure cotton and hemp fibres were modified by the sol–gel technology with different processing parameters. The morphology of coating depending on the dipping time and sol composition, were studied by scanning electron microscopy (SEM). The aim of this research was to study the influence of different processing parameters of sol–gel methods like dipping time, the influence of sol compositions on the coating morphology and quality, and to obtain durable and smooth coatings for surface modification of natural fibres.