Xueyi Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xueyi Zhang has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
Michael Tsapatsis
7 shared publications- Michael Tsapatsis
Institute for NanoBioTechnology & Department of Chemical and Biomolecular Engineering Johns Hopkins University Baltimore Maryland USA
6 shared publications Xinyang Yin
Department of Chemical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, United States
5 shared publicationsJay Thakkar
Department of Chemical Engineering, The Pennsylvania State University, University Park, Pennsylvania, 16802, USA
4 shared publications- Xinyang Yin
Department of Chemical Engineering, The Pennsylvania State University, University Park, USA
4 shared publications Bahman Elyassi
3 shared publications
Latest Publications
- 19 September 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 30 (10) , 2839-2849
Practical Synthesis of Methyl N 2-( tert -butoxycarbonyl)- N 4-(1-( tert -butyl)-1 H -pyrazol-4-yl)- L -asparaginyl- L -phenylalaninate Utilizing Continuous-Flow Technology
A practical synthesis of methyl N2-(tert-butoxycarbonyl)-N4-(1-(tert-butyl)-1H-pyrazol-4-yl)-L-asparaginyl-L-phenylalaninate (5) utilizing two continuous-flow processes is reported. The first is the trickle-bed continuous-flow hydrogenation of the nitro compound 1-tert-butyl-4-nitro-1H-pyrazole (1) on a multikilogram scale, followed by T3P-mediated amide coupling in flow with the dipeptide (S)-3-((tert-butoxycarbonyl)amino)-4-(((S)-1-methoxy-1-oxo-3-phenylpropan-2-yl)amino)-4-oxobutanoic acid (4) to obtain compound 5 in an overall 80–84% yield and >99.9 A% HPLC purity. In situ ReactIR was applied for real-time reaction monitoring. A catalyst-bed packing protocol was engineered to mitigate pressure drop and maintain catalyst-bed reactivity and longevity, which enabled a low catalyst loading of 0.1 mol % Pd/C for nitro reduction on a multikilogram scale.
- 19 September 2026
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 30 (10) , 2839-2849
Practical Synthesis of Methyl N 2-( tert -butoxycarbonyl)- N 4-(1-( tert -butyl)-1 H -pyrazol-4-yl)- L -asparaginyl- L -phenylalaninate Utilizing Continuous-Flow Technology
A practical synthesis of methyl N2-(tert-butoxycarbonyl)-N4-(1-(tert-butyl)-1H-pyrazol-4-yl)-L-asparaginyl-L-phenylalaninate (5) utilizing two continuous-flow processes is reported. The first is the trickle-bed continuous-flow hydrogenation of the nitro compound 1-tert-butyl-4-nitro-1H-pyrazole (1) on a multikilogram scale, followed by T3P-mediated amide coupling in flow with the dipeptide (S)-3-((tert-butoxycarbonyl)amino)-4-(((S)-1-methoxy-1-oxo-3-phenylpropan-2-yl)amino)-4-oxobutanoic acid (4) to obtain compound 5 in an overall 80–84% yield and >99.9 A% HPLC purity. In situ ReactIR was applied for real-time reaction monitoring. A catalyst-bed packing protocol was engineered to mitigate pressure drop and maintain catalyst-bed reactivity and longevity, which enabled a low catalyst loading of 0.1 mol % Pd/C for nitro reduction on a multikilogram scale.
- 15 July 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (14) , 6559-6567
Scalable Pillar[5]arene-Integrated Poly(arylate-amide) Molecular Sieve Membranes to Separate Light Gases
- 15 July 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (14) , 6559-6567
Scalable Pillar[5]arene-Integrated Poly(arylate-amide) Molecular Sieve Membranes to Separate Light Gases
- Open Access
- 14 July 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (32) , 20599-20602
Selective adsorption of butenes over butanes on isoreticular Ni-IRMOF-74-I and Ni-IRMOF-74-II
The separation of butanes and butenes using MOF-74 (with two reticular MOFs with different pore sizes, Ni-IRMOF-74-I and Ni-IRMOF-74-II) was evaluated computationally using density functional theory. We identified that C4 alkene versus alkane selectivity stems from π–d chemical interactions, whereas selectivity differences among butenes stem from steric implications.
- 14 July 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (32) , 20599-20602
Open AccessSelective adsorption of butenes over butanes on isoreticular Ni-IRMOF-74-I and Ni-IRMOF-74-II
The separation of butanes and butenes using MOF-74 (with two reticular MOFs with different pore sizes, Ni-IRMOF-74-I and Ni-IRMOF-74-II) was evaluated computationally using density functional theory. We identified that C4 alkene versus alkane selectivity stems from π–d chemical interactions, whereas selectivity differences among butenes stem from steric implications.
- 1 January 2022
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 330
Hierarchical metal-organic framework (MOF) pore engineering
- 1 January 2022
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 330
Hierarchical metal-organic framework (MOF) pore engineering
- 29 November 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (100) , 13756-13759
Finned hierarchical MOFs supported on cellulose for the selective adsorption of n-hexane and 1-hexene
Finned hierarchical MOF particles (Cu(BDC) nanosheets as fins grown perpendicularly on Ni2(BDC)2(DABCO) hexagonal prisms) on modified cellulose support provides selective 1-hexene/n-hexane separation.
- 29 November 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (100) , 13756-13759
Finned hierarchical MOFs supported on cellulose for the selective adsorption of n-hexane and 1-hexene
Finned hierarchical MOF particles (Cu(BDC) nanosheets as fins grown perpendicularly on Ni2(BDC)2(DABCO) hexagonal prisms) on modified cellulose support provides selective 1-hexene/n-hexane separation.
- 10 August 2020
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 4 (10) , 3057-3062
Hierarchical metal–organic frameworks constructed from intergrowth for the adsorption of light hydrocarbons
Hierarchical metal organic frameworks (MOFs) are a type of MOF material with both micropores and mesopores. In this work, we demonstrate heterometallic hierarchical MOF particles formed by intergrowth of pillared MOFs. Pillared MOF MI 2(ndc)2(dabco) (MI = Co, Ni, Cu, Zn, ndc = naphthalenedicarboxylic acid, dabco = 1,4-diazabicyclo[2.2.2]octane) particles were synthesized with various morphologies, on which MII 2(ndc)2(dabco) (MII = Co, Ni, Cu, Zn) particles were intergrown. The intergrown particles preserved the structure, crystallinity, and morphology of their respective primary particles, while creating additional mesoporosity for gas adsorption. Adsorption of hydrocarbons (CH4, ethane, ethene, propane, and propene) at pressures up to 10 bar (absolute) was performed on the MOFs. Hierarchical MOFs have shown increased adsorption of hydrocarbons at low pressures, and IAST selectivity of propane/methane as high as 53 was observed (total pressure 1 bar, CH4 mole fraction: 0.8), suggesting that the hierarchical materials can be used for adsorptive removal of natural gas liquids from crude natural gas.
- 10 August 2020
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 4 (10) , 3057-3062
Hierarchical metal–organic frameworks constructed from intergrowth for the adsorption of light hydrocarbons
Hierarchical metal organic frameworks (MOFs) are a type of MOF material with both micropores and mesopores. In this work, we demonstrate heterometallic hierarchical MOF particles formed by intergrowth of pillared MOFs. Pillared MOF MI 2(ndc)2(dabco) (MI = Co, Ni, Cu, Zn, ndc = naphthalenedicarboxylic acid, dabco = 1,4-diazabicyclo[2.2.2]octane) particles were synthesized with various morphologies, on which MII 2(ndc)2(dabco) (MII = Co, Ni, Cu, Zn) particles were intergrown. The intergrown particles preserved the structure, crystallinity, and morphology of their respective primary particles, while creating additional mesoporosity for gas adsorption. Adsorption of hydrocarbons (CH4, ethane, ethene, propane, and propene) at pressures up to 10 bar (absolute) was performed on the MOFs. Hierarchical MOFs have shown increased adsorption of hydrocarbons at low pressures, and IAST selectivity of propane/methane as high as 53 was observed (total pressure 1 bar, CH4 mole fraction: 0.8), suggesting that the hierarchical materials can be used for adsorptive removal of natural gas liquids from crude natural gas.
- 8 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (14) , 6487-6500
Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities
Measurements of the gas sensing performance of nanomaterials typically involve the use of interdigitated electrodes (IDEs). A separate heater is often integrated to provide elevated temperature for improved sensing performance. However, the use of IDEs and separate heaters increases fabrication complexity. Here, a novel gas sensing platform based on a highly porous laser-induced graphene (LIG) pattern is reported. The LIG gas sensing platform consists of a sensing region and a serpentine interconnect region. A thin film of metal (e.g., Ag) coated in the serpentine interconnect region significantly reduces its resistance, thereby providing a localized Joule healing in the sensing region (i.e., self-heating) during typical measurements of chemoresistive gas sensors. Dispersing nanomaterials with different selectivity in the sensing region results in an array to potentially deconvolute various gaseous components in the mixture. The self-heating of the LIG gas sensing platform is first studied as a function of the applied voltage during resistance measurement and LIG geometric parameters (e.g., linewidth from 120 to 240 μm) to achieve an operating temperature from 20 to 80 °C. Systematic investigations of various nanomaterials demonstrate the feasibility of the LIG gas sensing performance. Taken together with the stretchable design layout in the serpentine interconnect region to provide mechanical robustness over a tensile strain of 20%, the gas sensor with a significant response (6.6‰ ppm−1), fast response/recovery processes, excellent selectivity, and an ultralow limit of detection (1.5 parts per billion) at a modest temperature from self-heating opens new opportunities in epidermal electronic devices.
- 8 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (14) , 6487-6500
Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities
Measurements of the gas sensing performance of nanomaterials typically involve the use of interdigitated electrodes (IDEs). A separate heater is often integrated to provide elevated temperature for improved sensing performance. However, the use of IDEs and separate heaters increases fabrication complexity. Here, a novel gas sensing platform based on a highly porous laser-induced graphene (LIG) pattern is reported. The LIG gas sensing platform consists of a sensing region and a serpentine interconnect region. A thin film of metal (e.g., Ag) coated in the serpentine interconnect region significantly reduces its resistance, thereby providing a localized Joule healing in the sensing region (i.e., self-heating) during typical measurements of chemoresistive gas sensors. Dispersing nanomaterials with different selectivity in the sensing region results in an array to potentially deconvolute various gaseous components in the mixture. The self-heating of the LIG gas sensing platform is first studied as a function of the applied voltage during resistance measurement and LIG geometric parameters (e.g., linewidth from 120 to 240 μm) to achieve an operating temperature from 20 to 80 °C. Systematic investigations of various nanomaterials demonstrate the feasibility of the LIG gas sensing performance. Taken together with the stretchable design layout in the serpentine interconnect region to provide mechanical robustness over a tensile strain of 20%, the gas sensor with a significant response (6.6‰ ppm−1), fast response/recovery processes, excellent selectivity, and an ultralow limit of detection (1.5 parts per billion) at a modest temperature from self-heating opens new opportunities in epidermal electronic devices.
- 17 September 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (40) , 12908-12913
Coordinatively Unsaturated Metal Site-Promoted Selective Adsorption of Organic Molecules on Supported Metal–Organic Framework Nanosheets
Metal-organic frameworks (MOFs) are a class of customizable porous material that have shown good performance in separation processes, due to their large surface area and molecular recognition property. Although the effects of chemical structure of MOFs on their separation performance were extensively studied, the exploration of their surface properties was still limited. This work demonstrated a MOF nanosheet with large amount of coordinatively unsaturated metal sites, Cu(BDC) (copper (II) benzenedicarboxylate), where the unsaturated Cu sites were utilized to selectively adsorb organic molecules with Lewis basicity. This work also investigated the direct growth of Cu(BDC) on cellulose substrate, where the MOF nanosheets were immobilized on the cellulose substrate, enabling the composite material for practical applications. The heterogeneous nucleation and growth of MOF nanosheets on cellulose were achieved by tuning the basicity of solution and reaction temperature. We believe this direct growth approach can be applied to other MOF composite materials for separation and purification purposes, as well as other applications involving molecular recognition properties of MOFs, such as sensing, catalysis, and enzyme immobilization.
- 17 September 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (40) , 12908-12913
Coordinatively Unsaturated Metal Site-Promoted Selective Adsorption of Organic Molecules on Supported Metal–Organic Framework Nanosheets
Metal-organic frameworks (MOFs) are a class of customizable porous material that have shown good performance in separation processes, due to their large surface area and molecular recognition property. Although the effects of chemical structure of MOFs on their separation performance were extensively studied, the exploration of their surface properties was still limited. This work demonstrated a MOF nanosheet with large amount of coordinatively unsaturated metal sites, Cu(BDC) (copper (II) benzenedicarboxylate), where the unsaturated Cu sites were utilized to selectively adsorb organic molecules with Lewis basicity. This work also investigated the direct growth of Cu(BDC) on cellulose substrate, where the MOF nanosheets were immobilized on the cellulose substrate, enabling the composite material for practical applications. The heterogeneous nucleation and growth of MOF nanosheets on cellulose were achieved by tuning the basicity of solution and reaction temperature. We believe this direct growth approach can be applied to other MOF composite materials for separation and purification purposes, as well as other applications involving molecular recognition properties of MOFs, such as sensing, catalysis, and enzyme immobilization.
- 13 June 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (25) , 11121-11126
Recovery of Critical Rare-Earth Elements Using ETS-10 Titanosilicate
- 13 June 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (25) , 11121-11126
Recovery of Critical Rare-Earth Elements Using ETS-10 Titanosilicate
- Open Access
- 9 October 2018
- Published by Wiley in ChemCatChem
- Vol. 10 (19) , 4192
Cover Feature: Ethylene Oligomerization to Select Oligomers on Ni‐ETS‐10 (ChemCatChem 19/2018)
- 9 October 2018
- Published by Wiley in ChemCatChem
- Vol. 10 (19) , 4192
Open AccessCover Feature: Ethylene Oligomerization to Select Oligomers on Ni‐ETS‐10 (ChemCatChem 19/2018)