Christa D. Peters-Lidard

Existing satellite systems primarily observe individual components of the terrestrial water cycle, whereas drought is fundamentally an emergent, temporary process resulting from interactions among all terrestrial water storage compartments and human water use (AghaKouchak et al., 2015; AghaKouchak et al., 2021). Given the complex nature of monitoring drought across several temporal and spatial domains, remote sensing tools enable us to augment our limited in situ networks while also helping us to better detect rapid onset/intensification of drought. This technology frontier is ripe for flash drought detection and mapping (Otkin et al., 2018; Christian et al., 2024). These tools can also help us better support agricultural, environmental and water resource management and decision making. As such, to better understand and advance drought monitoring and mitigation, we recommend prioritizing measurements focused on multi-domain compartment water storage, subsurface moisture, human water use quantification and coupled water-energy budgets. This white paper is an outcome of a community-led, community-engaged effort to identify and elevate emerging opportunities in hydrologic science that can provide significant benefits for decision-making related to drought, floods, water quality, water supply and water demand.

The Laurentian Great Lakes significantly influence the climate of the Midwest and Northeast United States due to their vast thermal inertia, moisture source potential, and complex heat and moisture flux dynamics. This study presents a newly developed coupled lake–ice–atmosphere (CLIAv1) modeling system for the Great Lakes by coupling the National Aeronautics and Space Administration (NASA) Unified Weather Research and Forecasting (NU-WRF) regional climate model (RCM) with the three-dimensional (3D) Finite Volume Community Ocean Model (FVCOM) and investigates the impact of coupled dynamics on simulations of the Great Lakes' winter climate. By integrating 3D lake hydrodynamics, CLIAv1 demonstrates superior performance in reproducing observed lake surface temperatures (LSTs), ice cover distribution, and the vertical thermal structure of the Great Lakes compared to the NU-WRF model coupled with the default 1D Lake Ice Snow and Sediment Simulator (LISSS). CLIAv1 also enhances the simulation of over-lake atmospheric conditions, including air temperature, wind speed, and sensible and latent heat fluxes, underscoring the importance of resolving complex lake dynamics for reliable regional Earth system projections. More importantly, the key contribution of this study is the identification of critical physical processes that influence lake thermal structure and ice cover – processes that are missed by 1D lake models but effectively resolved by 3D lake models. Through process-oriented numerical experiments, we identify key 3D hydrodynamic processes – ice transport, heat advection, and shear production in turbulence – that explain the superiority of 3D lake models to 1D lake models, particularly in cold season performance and lake–atmosphere interactions. Critically, all three of these processes are dynamically linked to water currents – spatially and temporally evolving flow fields that are structurally absent in 1D models. This study aims to advance our understanding of the physical mechanisms that underlie the fundamental differences between 3D and 1D lake models in simulating key hydrodynamic processes during the winter season, and it offers generalized insights that are not constrained by specific model configurations.

The Laurentian Great Lakes significantly influence the climate of the Midwest and Northeast United States, due to their vast thermal inertia, moisture source potential, and unique heat and moisture flux dynamics. This study presents a newly developed coupled lake-ice-atmosphere (CLIAv1) modeling system for the Great Lakes by coupling the National Aeronautics and Space Administration (NASA)-Unified Weather Research and Forecasting (NU-WRF) regional climate model (RCM) with the three-dimensional (3D) Finite Volume Community Ocean Model (FVCOM) and investigates the impact of coupled dynamics on simulating the Great Lakes' winter climate. By integrating 3D lake hydrodynamics, CLIAv1 addresses the limitations of traditional one-dimensional (1D) lake and demonstrates superior performance in reproducing observed LSTs, ice cover distribution, and the vertical thermal structure of the Great Lakes compared to the NU-WRF model coupled with the default 1D Lake Ice Snow and Sediment Simulator (LISSS). CLIAv1 also enhances simulation of over-lake atmospheric conditions, including air temperature, wind speed, and sensible and latent heat fluxes, underscoring the importance of resolving complex lake dynamics for reliable climate projections. More importantly, this study addresses the crucial question about what are the key processes influencing lake thermal structure and ice cover that are missed by 1D lake models but effectively captured by 3D lake models. Through process-oriented numerical experiments, we identify key 3D hydrodynamic processes – ice transport, heat advection, and shear production in turbulence – that explain the superiority of 3D lake models over 1D lake models, particularly in cold season performance and lake-atmosphere interactions. Properly resolving these processes using 3D hydrodynamic model is crucial for successfully simulating the lake-ice-atmosphere coupled Great Lakes winter system. This research underscores the necessity of incorporating 3D hydrodynamic models in RCMs to improve our predictive understanding of the Great Lakes' response to climate change. The findings advocate for a shift towards high-resolution, physics-based modeling approaches to ensure accurate future climate and limnological projections for large freshwater systems.

Previous studies showed that conical scanning radiometers greatly outperform cross-track scanning radiometers for precipitation retrieval over ocean. This study demonstrates a novel approach to improve precipitation rates at the cross-track scanning radiometers’ observation time by propagating the conical scanning radiometers’ retrievals to the cross-track scanning radiometers’ observation time. The improved precipitation rate is a weighted average of original cross-track radiometers’ retrievals and retrievals propagated from a conical scanning radiometer. Results show that the morphed precipitation rates agree much better with the reference. The degree of improvement depends on several factors, including the propagated precipitation source, the time interval between the cross-track scanning radiometer and the conical scanning radiometer, the precipitation type (convective versus stratiform), the precipitation events’ size, and the geolocation. The study has potential to greatly improve high-impact weather systems monitoring (e.g., hurricanes) and multisatellite precipitation products. It may also enhance the usefulness of future satellite missions with cross-track scanning radiometers on board.

Representation of irrigation in Earth System Models has advanced over the past decade, yet large uncertainties persist in the effective simulation of irrigation practices, particularly over locations where the on‐ground practices and climate impacts are less reliably known. Here we investigate the utility of assimilating remotely sensed vegetation data for improving irrigation water use and associated fluxes within a land surface model. We show that assimilating optical sensor‐based leaf area index estimates significantly improves the simulation of irrigation water use when compared to the USGS ground reports. For heavily irrigated areas, assimilation improves the evaporative fluxes and gross primary production (GPP) simulations, with the median correlation increasing by 0.1–1.1 and 0.3–0.6, respectively, as compared to the reference datasets. Further, bias improvements in the range of 14–35 mm mo⁻¹ and 10–82 g m⁻² mo⁻¹ are obtained in evaporative fluxes and GPP as a result of incorporating vegetation constraints, respectively. These results demonstrate that the use of remotely sensed vegetation data is an effective, observation‐informed, globally applicable approach for simulating irrigation and characterizing its impacts on water and carbon states.

From the Hindu Kush mountains to the Registan Desert, Afghanistan is a diverse landscape where droughts, floods, conflict, and economic market accessibility pose challenges for agricultural livelihoods and food security. The ability to remotely monitor environmental conditions is critical to support decision making for humanitarian assistance. The Famine Early Warning Systems Network (FEWS NET) Land Data Assimilation System (FLDAS) global and Central Asia data streams provide information on hydrologic states for routine integrated food security analysis. While developed for a specific project, these data are publicly available and useful for other applications that require hydrologic estimates of the water and energy balance. These two data streams are unique because of their suitability for routine monitoring, as well as for being a historical record for computing relative indicators of water availability. The global stream is available at ∼ 1-month latency, and monthly average outputs are on a 10 km grid from 1982–present. The second data stream, Central Asia (21–56^∘ N, 30–100^∘ E), at ∼ 1 d latency, provides daily average outputs on a 1 km grid from 2000–present. This paper describes the configuration of the two FLDAS data streams, background on the software modeling framework, selected meteorological inputs and parameters, and results from previous evaluation studies. We also provide additional analysis of precipitation and snow cover over Afghanistan. We conclude with an example of how these data are used in integrated food security analysis. For use in new and innovative studies that will improve understanding of this region, these data are hosted by U.S. Geological Survey data portals and the National Aeronautics and Space Administration (NASA). The Central Asia data described in this paper can be accessed via the NASA repository at https://doi.org/10.5067/VQ4CD3Y9YC0R (Jacob and Slinski, 2021), and the global data described in this paper can be accessed via the NASA repository at https://doi.org/10.5067/5NHC22T9375G (McNally, 2018).

The Middle East and North Africa (MENA) region has experienced more frequent and severe drought events in recent decades, leading to increasingly pressing concerns over already strained food and water security. An effective drought monitoring and early warning system is thus critical to support risk mitigation and management by countries in the region. Here we investigate the potential for assimilation of leaf area index (LAI) and soil moisture observations to improve the representation of the overall hydrological and carbon cycles and drought by an advanced land surface model. The results reveal that assimilating soil moisture does not meaningfully improve model representation of the hydrological and biospheric processes for this region, but instead it degrades the simulation of the interannual variation in evapotranspiration (ET) and carbon fluxes, mainly due to model weaknesses in representing prognostic phenology. However, assimilating LAI leads to greater improvement, especially for transpiration and carbon fluxes, by constraining the timing of simulated vegetation growth response to evolving climate conditions. LAI assimilation also helps to correct for the erroneous interaction between the prognostic phenology and irrigation during summertime, effectively reducing a large positive bias in ET and carbon fluxes. Independently assimilating LAI or soil moisture alters the categorization of drought, with the differences being greater for more severe drought categories. We highlight the vegetation representation in response to changing land use and hydroclimate as one of the key processes to be captured for building a successful drought early warning system for the MENA region.

Eric Wood's contributions to distributed modeling were partially motivated by a desire to test the REA hypothesis as well as by a desire to demonstrate the impact of remotely sensed data on hydrologic prediction.  In this brief talk, I will review the advances in distributed modeling, such as high-resolution terrain, distributed hydrometeorological forcings and soil-vegetation parameters, high performance computing and communications, data assimilation, coupled land-atmosphere modeling, that laid the foundation for macroscale and ultimately "hyperresolution" modeling.  These foundational advances exemplify the 3rd paradigm in hydrology and are moving us towards embracing a 4th paradigm in hydrology, where we enable a rigorous confrontation of our hypotheses embodied within our models with a range of data types across many locations and spatial-temporal scales.