Julia Kastner
Julia Kastner has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Anita Fuchsbauer
Functional Surfaces and Nanostructures, Profactor GmbH, Steyr-Gleink, AUSTRIA
2 shared publicationsDieter Holzinger
Tigital, Tiger Coatings GmbH & Co.KG, Wels, AUSTRIA
2 shared publicationsIurii Gnatiuk
Tigital, Tiger Coatings GmbH & Co.KG, Wels, AUSTRIA
2 shared publications- Michael Johannes Haslinger
Profactor GmbH, Steyr-Gleink, Austria
2 shared publications - Michael Mühlberger
Profactor GmbH, Im Stadtgut D1, 4407 Steyr-Gleink, Austria
2 shared publications Thomas Faury
2 shared publications
Latest Publications
- Open Access
- 28 September 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (10) , 1858
Integration of Inkjet Printed Graphene as a Hole Transport Layer in Organic Solar Cells
This work demonstrates the green production of a graphene ink for inkjet printing and its use as a hole transport layer (HTL) in an organic solar cell. Graphene as an HTL improves the selective hole extraction at the anode and prevents charge recombination at the electronic interface and metal diffusion into the photoactive layer. Graphite was exfoliated in water, concentrated by iterative centrifugation, and characterized by Raman. The concentrated graphene ink was incorporated into inverted organic solar cells by inkjet printing on the active polymer in an ambient atmosphere. Argon plasma was used to enhance wetting of the polymer with the graphene ink during printing. The argon plasma treatment of the active polymer P3HT:PCBM was investigated by XPS, AFM and contact angle measurements. Efficiency and lifetime studies undertaken show that the device with graphene as HTL is fully functional and has good potential for an inkjet printable and flexible alternative to PEDOT:PSS.
- 28 September 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (10) , 1858
Open AccessIntegration of Inkjet Printed Graphene as a Hole Transport Layer in Organic Solar Cells
This work demonstrates the green production of a graphene ink for inkjet printing and its use as a hole transport layer (HTL) in an organic solar cell. Graphene as an HTL improves the selective hole extraction at the anode and prevents charge recombination at the electronic interface and metal diffusion into the photoactive layer. Graphite was exfoliated in water, concentrated by iterative centrifugation, and characterized by Raman. The concentrated graphene ink was incorporated into inverted organic solar cells by inkjet printing on the active polymer in an ambient atmosphere. Argon plasma was used to enhance wetting of the polymer with the graphene ink during printing. The argon plasma treatment of the active polymer P3HT:PCBM was investigated by XPS, AFM and contact angle measurements. Efficiency and lifetime studies undertaken show that the device with graphene as HTL is fully functional and has good potential for an inkjet printable and flexible alternative to PEDOT:PSS.
- 22 November 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (4) , 045601
Grinded nano-graphite inkjet inks for application in organic solar cells
The production of printable graphene flakes is not easy to scale up when produced by ultrasonication and purified by centrifugation. In this work, natural graphite flakes were exfoliated by wet ball milling in water supported by the addition of sodium deoxycholate as a surfactant and the dispersion was formulated for inkjet printing. By subsequent dilution and filtration of the milling paste, more than 45 l of a stable dispersion of nano-graphite particles in one batch process was obtained. The dispersion was characterized by thermogravimetric analysis and UV–vis spectroscopy to determine concentration, and experiments to measure long-term stability were conducted. The nano-graphite particles were analyzed by optical microscopy, scanning electron microscopy and Raman spectroscopy, revealing 300–400 nm sized particles. The dispersion was formulated into an inkjet ink and tested as interfacial hole transport layer between the anode and the photo-active bulk-heterojunction layer of an organic solar cell with inverted structure. The nano-graphite flakes are inkjet printable and conductive and therefore show potential as a low-cost alternative to polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate.
- 22 November 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (4) , 045601
Grinded nano-graphite inkjet inks for application in organic solar cells
The production of printable graphene flakes is not easy to scale up when produced by ultrasonication and purified by centrifugation. In this work, natural graphite flakes were exfoliated by wet ball milling in water supported by the addition of sodium deoxycholate as a surfactant and the dispersion was formulated for inkjet printing. By subsequent dilution and filtration of the milling paste, more than 45 l of a stable dispersion of nano-graphite particles in one batch process was obtained. The dispersion was characterized by thermogravimetric analysis and UV–vis spectroscopy to determine concentration, and experiments to measure long-term stability were conducted. The nano-graphite particles were analyzed by optical microscopy, scanning electron microscopy and Raman spectroscopy, revealing 300–400 nm sized particles. The dispersion was formulated into an inkjet ink and tested as interfacial hole transport layer between the anode and the photo-active bulk-heterojunction layer of an organic solar cell with inverted structure. The nano-graphite flakes are inkjet printable and conductive and therefore show potential as a low-cost alternative to polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate.
- 28 September 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 48
Function follows form: combining nanoimprint and inkjet printing
- 28 September 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 48
Function follows form: combining nanoimprint and inkjet printing
- 1 May 2017
- Published by Elsevier in Microelectronic Engineering
- Vol. 176, 84-88
Silver-based reactive ink for inkjet-printing of conductive lines on textiles
- 1 May 2017
- Published by Elsevier in Microelectronic Engineering
- Vol. 176, 84-88
Silver-based reactive ink for inkjet-printing of conductive lines on textiles
- 1 April 2015
- Published by Elsevier in European Polymer Journal
- Vol. 65, 221-231
Nanocontact printing stamp material via bi-functionalization of polyhedral oligomeric silsesquioxanes
- 1 April 2015
- Published by Elsevier in European Polymer Journal
- Vol. 65, 221-231
Nanocontact printing stamp material via bi-functionalization of polyhedral oligomeric silsesquioxanes