Yaojing Feng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaojing Feng has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Shoudao Huang
Hunan University
10 shared publications - Jiangtao Yang
Hunan University
7 shared publications Shoudao Huang
7 shared publications- Chao Guo
College of Electrical and Information Engineering, Hunan University, Changsha 410082, China
4 shared publications - Chenxi Xia
College of Electrical and Information Engineering, Hunan University, Changsha, China
4 shared publications - Qing Li
College of Electrical and Information Engineering, Hunan University, Changsha, China
4 shared publications
Latest Publications
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 5013-5026
Analysis and Comparative Study of a Novel Stator-Permanent-Magnet Axial-Flux Counter-Rotating Hybrid-Excitation Machine
This article proposes a novel stator-permanent-magnet axial-flux counter-rotating hybridexcitation machine (SPM-AFCRHEM) for unbalanced-load operation of counter-rotating propeller (CRP) systems and investigates three topologies with different stator configurations. By utilizing Ushaped permanent magnets (UPMs) and field-regulation windings to achieve magnetic decoupling and field-regulation capability. First, the field-regulation principle of SPM-AFCRHEMs are analyzed. The working harmonics and their respective torque contributions are calculated and evaluated by establishing the magnetomotive force (MMF)-permeance model. Subsequently, the torque performance of SPM-AFCRHEMs with different pole-slot combinations is compared under unified winding layout principles, and the risk of negative-sequence back-electromotive force electromotive force (EMF) caused by stator yoke magnetic saturation is discussed. Finally, the machines are comprehensively evaluated through comparative studies of no-load characteristics, load performance, and field-regulation time constants. A prototype of the top-performing configuration is fabricated and experimentally validated, demonstrating that the proposed SPM-AFCRHEM represents a competitive solution for direct-drive CRP systems.
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 5013-5026
Analysis and Comparative Study of a Novel Stator-Permanent-Magnet Axial-Flux Counter-Rotating Hybrid-Excitation Machine
This article proposes a novel stator-permanent-magnet axial-flux counter-rotating hybridexcitation machine (SPM-AFCRHEM) for unbalanced-load operation of counter-rotating propeller (CRP) systems and investigates three topologies with different stator configurations. By utilizing Ushaped permanent magnets (UPMs) and field-regulation windings to achieve magnetic decoupling and field-regulation capability. First, the field-regulation principle of SPM-AFCRHEMs are analyzed. The working harmonics and their respective torque contributions are calculated and evaluated by establishing the magnetomotive force (MMF)-permeance model. Subsequently, the torque performance of SPM-AFCRHEMs with different pole-slot combinations is compared under unified winding layout principles, and the risk of negative-sequence back-electromotive force electromotive force (EMF) caused by stator yoke magnetic saturation is discussed. Finally, the machines are comprehensively evaluated through comparative studies of no-load characteristics, load performance, and field-regulation time constants. A prototype of the top-performing configuration is fabricated and experimentally validated, demonstrating that the proposed SPM-AFCRHEM represents a competitive solution for direct-drive CRP systems.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1767-1779
Investigation on Non-Uniform Teeth Application in Counter-Rotating Axial-Flux Hybrid-Excitation Permanent Magnet Machine With Low Cogging Torque
The counter-rotating axial-flux hybrid-excitation permanent magnet (PM) machine is a novel power device specifically designed for counter-rotating propeller (CRP) systems. Cogging torque (CT) can induce vibrations and noise, adversely affecting its dynamic performance and stealth characteristics, necessitating strict suppression. However, the variable-flux and consequent-pole (CP) structure obscure the characteristics of the CT, leading to a lack of a clear theoretical basis for its suppression. To address this challenge, this paper investigates CT suppression in the counter-rotating axial-flux hybrid-excitation PM machines using non-uniform teeth (NUT) and comprehensively analyzes the implementation consequences. Firstly, a general CT model of the counter-rotating axial-flux hybrid-excitation PM machine is established, and the fundamental principles of NUT are derived. Subsequently, the constraints required to achieve a beneficial effect while preventing phase-phase asymmetry are proposed. Furthermore, the impact of the proposed method on the electromagnetic performance of counter-rotating axial-flux hybrid-excitation PM machine is examined, leading to the formulation of optimal angle allocation principles and recalculation of the winding factor. Finally, theoretical analysis is validated through experimental results, demonstrating that the research work effectively guides the application of NUT and enhances the robustness of counter-rotating axial-flux hybrid-excitation PM machine in CRP drive systems.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1767-1779
Investigation on Non-Uniform Teeth Application in Counter-Rotating Axial-Flux Hybrid-Excitation Permanent Magnet Machine With Low Cogging Torque
The counter-rotating axial-flux hybrid-excitation permanent magnet (PM) machine is a novel power device specifically designed for counter-rotating propeller (CRP) systems. Cogging torque (CT) can induce vibrations and noise, adversely affecting its dynamic performance and stealth characteristics, necessitating strict suppression. However, the variable-flux and consequent-pole (CP) structure obscure the characteristics of the CT, leading to a lack of a clear theoretical basis for its suppression. To address this challenge, this paper investigates CT suppression in the counter-rotating axial-flux hybrid-excitation PM machines using non-uniform teeth (NUT) and comprehensively analyzes the implementation consequences. Firstly, a general CT model of the counter-rotating axial-flux hybrid-excitation PM machine is established, and the fundamental principles of NUT are derived. Subsequently, the constraints required to achieve a beneficial effect while preventing phase-phase asymmetry are proposed. Furthermore, the impact of the proposed method on the electromagnetic performance of counter-rotating axial-flux hybrid-excitation PM machine is examined, leading to the formulation of optimal angle allocation principles and recalculation of the winding factor. Finally, theoretical analysis is validated through experimental results, demonstrating that the research work effectively guides the application of NUT and enhances the robustness of counter-rotating axial-flux hybrid-excitation PM machine in CRP drive systems.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (10) , 12305-12316
MPC-Based Droop Control Scheme for Fatigue Load Suppression in Wind Farms Based on Asynchronous Distributed Manner
In this article, we propose an asynchronous distributed model predictive control (MPC) based droop control (AD-MDC) scheme to suppress fatigue load in doubly fed induction generator-based wind farms (WFs). To improve the fatigue load suppression performance, a droop control method is adopted in conjunction with an MPC-based WF control scheme to coordinate the active power of wind turbines (WTs). Within the predictive horizon, the generator speed sensitivity is calculated to formulate the MPC-based optimization problem, thereby achieving global optimal regulation of active power while tracking the dispatch command. For more effective control of WTs, an asynchronous distributed alternating direction method of multipliers is developed to minimize the fluctuations of fatigue load, while improving the time efficiency and information privacy protection. A WF with 40 × 5 MW WTs is established as a testing system to verify the effectiveness of the proposed AD-MDC scheme.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (10) , 12305-12316
MPC-Based Droop Control Scheme for Fatigue Load Suppression in Wind Farms Based on Asynchronous Distributed Manner
In this article, we propose an asynchronous distributed model predictive control (MPC) based droop control (AD-MDC) scheme to suppress fatigue load in doubly fed induction generator-based wind farms (WFs). To improve the fatigue load suppression performance, a droop control method is adopted in conjunction with an MPC-based WF control scheme to coordinate the active power of wind turbines (WTs). Within the predictive horizon, the generator speed sensitivity is calculated to formulate the MPC-based optimization problem, thereby achieving global optimal regulation of active power while tracking the dispatch command. For more effective control of WTs, an asynchronous distributed alternating direction method of multipliers is developed to minimize the fluctuations of fatigue load, while improving the time efficiency and information privacy protection. A WF with 40 × 5 MW WTs is established as a testing system to verify the effectiveness of the proposed AD-MDC scheme.
- 16 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-6
A Novel Counter-Rotating Axial-Flux Permanent Magnet Memory Machine With Dual-Rotor
To address the operational requirements of the counter-rotating propeller (CRP) system under unbalance load conditions, a novel counter-rotating axial-flux permanent magnet memory machine (CR-AFPMM) is proposed, which combines the regulative magnetic field of the memory machine (MM) with the high torque density of the axial-flux permanent magnet machine (AFPMM). First, the machine configurations and operating principle of CR-AFPMMs based on different magnetic circuits are introduced. Subsequently, the electromagnetic performance of the three structures is compared and analyzed, including air-gap magnetic flux density, back electromotive force (back EMF), and torque performance under different magnetization states (MSs). Furthermore, the anti-demagnetization ability of the low coercive force permanent magnets (LCF PMs) under the impact of load current is comprehensively analyzed. The results indicate that the proposed CR-AFPMM with hybrid magnetic circuit has profound application prospects in the driving device of the CRP.
- 16 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-6
A Novel Counter-Rotating Axial-Flux Permanent Magnet Memory Machine With Dual-Rotor
To address the operational requirements of the counter-rotating propeller (CRP) system under unbalance load conditions, a novel counter-rotating axial-flux permanent magnet memory machine (CR-AFPMM) is proposed, which combines the regulative magnetic field of the memory machine (MM) with the high torque density of the axial-flux permanent magnet machine (AFPMM). First, the machine configurations and operating principle of CR-AFPMMs based on different magnetic circuits are introduced. Subsequently, the electromagnetic performance of the three structures is compared and analyzed, including air-gap magnetic flux density, back electromotive force (back EMF), and torque performance under different magnetization states (MSs). Furthermore, the anti-demagnetization ability of the low coercive force permanent magnets (LCF PMs) under the impact of load current is comprehensively analyzed. The results indicate that the proposed CR-AFPMM with hybrid magnetic circuit has profound application prospects in the driving device of the CRP.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 15 (4) , 2143-2154
Distributed Optimal Power Control Scheme for Structural Loads Minimization in Wind Farms via a Consensus Approach
This study proposes a distributed optimal power control (OPC) scheme to reduce the structural loads in WFs for extending the service life of component via a consensus approach. First, a nonlinear cost function of the thrust force and the shaft torque is formulated to minimize structural loads by coordinating the active power and pitch angle of wind turbines (WTs). Then, the nonlinear cost function is linearized via the state variables of WTs and transformed into a linear equation respected to the control variables. Moreover, a fully distributed alternating direction method of multipliers is developed for the optimal structural loads problem to calculate the optimal values of cost function, which could distribute computational burden enhance information privacy protection. Based on the proposed distributed framework, only the intermediate information is exchanged among adjacent WTs controller. More importantly, when several WTs controller occur the communication failure, the communication disconnected WTs can work in decentralized control mode to regulate the pitch angle, and the other WTs with communication still track the power command, which could improve the robustness of the control system. A WF simulation is established as a testing system to verify the effectiveness of the proposed OPC scheme.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 15 (4) , 2143-2154
Distributed Optimal Power Control Scheme for Structural Loads Minimization in Wind Farms via a Consensus Approach
This study proposes a distributed optimal power control (OPC) scheme to reduce the structural loads in WFs for extending the service life of component via a consensus approach. First, a nonlinear cost function of the thrust force and the shaft torque is formulated to minimize structural loads by coordinating the active power and pitch angle of wind turbines (WTs). Then, the nonlinear cost function is linearized via the state variables of WTs and transformed into a linear equation respected to the control variables. Moreover, a fully distributed alternating direction method of multipliers is developed for the optimal structural loads problem to calculate the optimal values of cost function, which could distribute computational burden enhance information privacy protection. Based on the proposed distributed framework, only the intermediate information is exchanged among adjacent WTs controller. More importantly, when several WTs controller occur the communication failure, the communication disconnected WTs can work in decentralized control mode to regulate the pitch angle, and the other WTs with communication still track the power command, which could improve the robustness of the control system. A WF simulation is established as a testing system to verify the effectiveness of the proposed OPC scheme.
- 28 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
A Novel Counter-Rotating Axial-Flux Hybrid-Excitation Permanent Magnet Machine With Dual-Rotor
In order to better adapt to the load unbalance in the operation of counter-rotating propeller (CRP), a novel counter-rotating axial-flux hybrid-excitation permanent magnet machine (CR-AFHEPMM) is proposed in this paper, which combines the high torque density of the axial-flux permanent magnet machine (AFPMM) and the flexible flux adjustment of the hybrid excitation machine. The DC field windings are installed near the inner diameter of the SMC stator core with a special structure, enabling reverse adjustment of the air-gap magnetic field on both sides. Unbalanced load operation of two rotors can be realized without increasing the machine volume. Firstly, the structural features and operation principle of the CR-AFHEPMM are presented. Then, the influence of slot-pole combination, permanent magnet (PM) arrangement and key structural parameters on the stable operation, output torque and load unbalance range are studied. Finally, an optimal structure of the Halbach array consequent-pole PM rotor is further proposed and analyzed. The results show that the proposed CR-AFHEPMM is a promising candidate for the application of CRP.
- 28 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
A Novel Counter-Rotating Axial-Flux Hybrid-Excitation Permanent Magnet Machine With Dual-Rotor
In order to better adapt to the load unbalance in the operation of counter-rotating propeller (CRP), a novel counter-rotating axial-flux hybrid-excitation permanent magnet machine (CR-AFHEPMM) is proposed in this paper, which combines the high torque density of the axial-flux permanent magnet machine (AFPMM) and the flexible flux adjustment of the hybrid excitation machine. The DC field windings are installed near the inner diameter of the SMC stator core with a special structure, enabling reverse adjustment of the air-gap magnetic field on both sides. Unbalanced load operation of two rotors can be realized without increasing the machine volume. Firstly, the structural features and operation principle of the CR-AFHEPMM are presented. Then, the influence of slot-pole combination, permanent magnet (PM) arrangement and key structural parameters on the stable operation, output torque and load unbalance range are studied. Finally, an optimal structure of the Halbach array consequent-pole PM rotor is further proposed and analyzed. The results show that the proposed CR-AFHEPMM is a promising candidate for the application of CRP.